Search results for "control module"
-
Pixel Pixel TW283 Shutter Wireless Delay Remote Control SLR Shutter Flasher, For Canon E3, For Canon N3, For Nikon DC0, For Nikon DC2, For Sony S1, For Sony S2, For Instax 90, For Instax E3
1. Wireless/wired timing, wireless/wired shutter, four functions in one, providing a variety of options, when the receiver is out of power, you can use the wired mode2. Comfortable hand feeling, easy to carry and use3. Low power consumption LCD display, easy to view4. Functions: single shot/continuous shooting/B-gate/time-lapse shooting/timed shooting/interval shooting/schedule shooting, etc.5. Channel: 30 channels6. Transmission distance: more than 80m7. Power supply: 2 AAA batteries (not included)8. Packing list: transmitter x 1, receiver x 1, connection cable x 1, shutter connection cable x 19. Size: transmitter: about 14.6 x 4 x 1.9cm; receiver: about 7.3 x 3.8 x 3.1cm10. Weight: Transmitter: about 52.6g; Receiver: about 36.2gSpecification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 25cm * 25cm * 6cm / 9.84inch * 9.84inch * 2.36inch Qty per Carton 48 Carton Weight 8.64kgs / 19.05lb Carton Size 40cm * 27cm * 35cm / 15.75inch * 10.63inch * 13.78inch Loading Container 20GP: 705 cartons * 48 pcs = 33840 pcs40HQ: 1637 cartons * 48 pcs = 78576 pcs
£19.99
-
i2C i2C T20 Intelligent Motherboard Middle Layered Heating Platform For iPhone X-14 Series, i2C T20 For iPhone X-14 Series
1. T20 AlIntelligent desoldering station, Built-in Al intelligent interactive machine system, automatic recognition of voice dialogue2. The module can be replaced at will with infinite expansion, a segmental hollow-out design, and can increase, reduce, or take out the buckle3. One key separation and fit safety does not burst tin, intelligent temperature control does not hurt the motherboard4. Equipped with 1.28 inch round iPS LCD screen, a built-in cooling fan ten thousand revolution5. Built-in WiFi module, the subsequent single machine can be upgraded6. Support global software remote update7. A heating table that talks and welds, For iPhone X-14 series motherboard can be separated and fitted8. Built-in Al intelligent chip, independently and accurately recognizes voice commands, 0 seconds to read, fast response9. Ambient noise below 30dB, normal voice and speed within 6 meters, quick response10. One key separation and fit, safety does not burst tin, maximum heating, 30 seconds heating, 120 seconds stratification11. Intelligent temperature control, and high-temperature protection, do not hurt the motherboard12. Built-in 5V high-speed hydraulic fan, the turbine has 7 blades to dissipate the heat from strong winds, open the cooling setting, and you can manually set the cooling time13. Segmental hollow-out design, multifunctional 360 rotary press buckle, segmental hollow-out design, can increase, reduce, or take out the buckle, personalized selection according to demand, more flexible and convenient14. Push-pull module self-locking design; module automatically springs up when pressed, power line interface USB computer interfaceSpecification: General Compatible with Apple: iPhone 13 Pro Max, iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 12, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12 mini, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 11, iPhone XS, iPhone XS Max, iPhone XR, iPhone X Package Weight One Package Weight 1.44kgs / 3.17lb One Package Size 40cm * 30cm * 8cm / 15.75inch * 11.81inch * 3.15inch Qty per Carton 3 Carton Weight 3.96kgs / 8.72lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 3 pcs = 1860 pcs40HQ: 1439 cartons * 3 pcs = 4317 pcs
£98.99
-
PCF8591 AD / DA Conversion Module Analog to Digital to Conversion
1. Low standby current.through the I2C bus serial input / output. 2. PCF8591 by 3 hardware address pins addressing. Sampling rate PCF8591 I2C bus rate decided. 3. 4 analog inputs programmable as single-ended or differential inputs.Automatic incremental channel selection 4. PCF8591 analog voltage range from VSS to VDD.PCF8591 built-in track and hold circuit. 5. 8-bit successive approximation A / D converter. through an analog output DAC gain. module chip using PCF8951 . 6. Working Voltage : 2.5-6V Specification: General Size 3.6*2.3cm Weight 8g Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 9cm * 7cm * 5cm / 3.54inch * 2.76inch * 1.97inch Qty per Carton 120 Carton Weight 3.00kgs / 6.61lb Carton Size 34cm * 26cm * 22cm / 13.39inch * 10.24inch * 8.66inch Loading Container 20GP: 1371 cartons * 120 pcs = 164520 pcs40HQ: 3183 cartons * 120 pcs = 381960 pcs
£2.99 £0.99
-
Waveshare Waveshare RS485 to Ethernet Converter, US Plug, RS485
RS485 to Ethernet Converter, Easy-to-use, High-speed, Low-power, High-stability, UpgradableOverviewThe RS485 TO ETH module provides an easy way to communicate between RS485 and RJ45 port Ethernet, it can be configured via webpage.Features1. M0 series 32-bit ARM processor, fast speed, high efficiency2. 10/100M Auto-MDI/MDIX ethernet interface, regardless of cross-over or straight-through cable3. Configurable RS485 baudrate (600bps~230.4Kbps), supports five parity check options: None, Odd, Even, Mark, Space4. Available working modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)5. Configurable via webpage, AT commands, serial protocol, and network protocol, provides configuration protocol which can be integrated to your own software6. Support customized heartbeat packets, make sure the connection is truthful, as well as for actively retrieving sensor data7. Support customized registration packets, auto passing the registered packet as identifier after the connection is established, so that different devices can be distinguished8. Support customized webpage, allows user to customize the module configuration page9. Support RFC2217-like protocol, be able to communicate with devices whose serial setting (baudrate, data bit, etc.) may change10. KeepAlive mechanism, detects broken connection, auto re-connecting11. Support time-out reboot (no-data reboot), ensures a long-term stable connection, configurable reboot time12. Support DNS domain name resolution, configurable DNS server13. Support DHCP, auto-obtained IP or static IP14. Firmware is upgradable via the network15. Restore to factory settings via software and/or hardware16. Comes with default MAC address, which is customizable17. Provided software: module configuration software, TCP/UDP testing tool, VCOM virtual serial port software18. Example code: host computer (socket ), VB, C++, Delphi, Android, iOS, etc.Specifications1. Ethernet:- Connector: 4-pin RJ45- Communication rate: 10/100Mbps- Interface protection: 1.5KV electromagnetic isolation- Protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client- TX cache: 6Kbyte- RX cache: 4Kbyte2. RS485:- Connector: screw terminal (A+, B-, GND)- Data bit: 5bit, 6bit, 7bit, 8bit- Stop bit: 1, 2- Parity bit: None, Odd, Even, Mark, Space- Baudrate: 600bps~230.4Kbps- RX cache: 800byte- Hardware flow control: none- Interface protection:- 2KV ESD protection- RS485 pull up/down registers: 2.2KΩ3. Power:- Power supply: 5.0~7.0V (5V recommended)- Operating current: 150mA (@5V)- Power consumption: <1W- Interface protection: reverse-proof, ESD protection, anti-surge4. Environment:- Operating temperature: -25~75 degree C- Storage temperature: -40~105 degree C5. Size: 69.65*63.59*25.47mmPackage Contents1. RS485 TO ETH x12. 5V power adapter x1Specification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 8cm * 7cm * 3cm / 3.15inch * 2.76inch * 1.18inch Qty per Carton 455 Carton Weight 121.94kgs / 268.83lb Carton Size 56cm * 35cm * 39cm / 22.05inch * 13.78inch * 15.35inch Loading Container 20GP: 348 cartons * 455 pcs = 158340 pcs40HQ: 809 cartons * 455 pcs = 368095 pcs
£26.99
-
Waveshare CM5 Gigabit/2.5G Dual Ethernet Multi-Function Expansion Board Supports RS485 Industrial Communication, 4G / 5G Module And 4K Display Output, Waveshare 34251
1. CM5 card slot: compatible with all versions of Compute Module 52. Networking: 1000M Ethernet RJ45 port x 1; 2500M Ethernet RJ45 port x 13. Video: HDMI port x 1, supporting 4K output4. USB: USB 2.0 port (Type-C) x 1; USB 2.0 port (Type-A) x 1; USB 3.2 Gen1 port (Type-A) x 15. M.2: M.2 M KEY (PCIe Gen2/3 x 1, supporting 2230 / 2242 / 2280 NVMe or AI modules); M.2 B KEY, supporting 4G / 5G communication modules6. Storage: onboard Micro SD card slot (for CM5 versions without eMMC)7. Serial interface: RS485 x 48. Digital input: digital input x 1 (input voltage: 5V - 36V)9. Relay: allowable load: less than or equal to 10A 250V AC or less than or equal to 10A 30V DC10. Fan interface: 5V, 4-pin JST-SH PWM fan connector11. Beeper: single-channel controllable12. Others: onboard encryption chip13. Power input: 7V - 36V wide voltage (terminal block + round hole) or 5V 5A (Type-C)14. Size: about 13.25 x 11.22 x 3.45 cmBase plate packing list:- CM5-ETH-RS485-4G-BASE x 1- Screw cap x 1Specification: Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 16cm * 14cm * 6cm / 6.3inch * 5.51inch * 2.36inch Qty per Carton 96 Carton Weight 13.00kgs / 28.66lb Carton Size 50cm * 38cm * 30cm / 19.69inch * 14.96inch * 11.81inch Loading Container 20GP: 467 cartons * 96 pcs = 44832 pcs40HQ: 1086 cartons * 96 pcs = 104256 pcs
£56.99
-
12V 10A RF Wireless Remote Control Switch 1CH Relay Receiver
Basic parameters:1. Working voltage: DC12V2. Working frequency: 315MHZ/433MHZ3. Contact capacity: less than or equal to 10A/250VAC, 10A/30VDC4. Receiving sensitivity: greater than -105dB5. Is there a casing: Yes6. Remote control distance: 10-30 meters (no interference in open space), this distance is the theoretical distance without interference in open space7. In use, it will be reduced according to different environmental interference and partition walls8. Number of control channels: 1 channel normally open/normally closed contactFeatures:1. Output relay switching value: It can control loads with different voltages below 250V, and the power supply must be 12V.2. Small size: small size, light weight, circuit board size is only 35x32x19mm.3. The working mode can be adjusted by the user at will: the self-locking, interlocking and inching working modes can be adjusted through the pin short circuit.4. Learning code pairing: You can learn to pair with the same frequency remote control at will (don’t worry if you lose the remote control during use, just buy the remote control and learn it, and you don’t need to replace the whole set, which greatly saves the user’s cost).Specification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 8cm * 6cm * 3cm / 3.15inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 10.00kgs / 22.05lb Carton Size 36cm * 28cm * 22cm / 14.17inch * 11.02inch * 8.66inch Loading Container 20GP: 1202 cartons * 200 pcs = 240400 pcs40HQ: 2791 cartons * 200 pcs = 558200 pcs
£3.99
-
WAVESHARE Waveshare Multi Protection 8-Channel Industrial Relay Module for Raspberry Pi Pico, 20218
Features1. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal 2. Onboard photocoupler isolation, prevent interference from external high-voltage circuit connected to the relay 3. High quality relay, contact rating: 10A 250V AC or Less than or equal 10A 30V DC 4. ABS protection enclosure with rail-mount support, easy to install, safe to use 5. Breakout USB port and BOOT pin, make it easy to debug without disassembling the enclosure 6. PWR indicator, RGB LED, and passive buzzer outside the enclosure 7. Come with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operation voltage: 5V 2. Relay channel: 8CH 3. Communication protocol: USB 4. Contact form: 1NO 1NC 5. Communication interface: Micro USBPackage List1. ABS protection enclosure (top and bottom) x 1 2. Pico-Relay-B x 1 3. Screwdriver x 1 4. Screws pack x 1Specification: Package Weight One Package Weight 0.32kgs / 0.70lb One Package Size 16cm * 12cm * 5cm / 6.3inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 11.50kgs / 25.35lb Carton Size 50cm * 32cm * 27cm / 19.69inch * 12.6inch * 10.63inch Loading Container 20GP: 617 cartons * 40 pcs = 24680 pcs40HQ: 1432 cartons * 40 pcs = 57280 pcs
£14.99
-
DJI Secondhand Motion Controller For DJI Avata / FPV / Goggles 2 / FPV Goggles V2, DJI Motion Controller
1. The attitude of the aircraft will follow your hand movements and move with it, bringing an immersive sense of "human-machine integration".2. Operating frequency: 2.400-2.4835 GHz; 5.725-5.850 GHz3. Ambient temperature: -10 to 40 degrees Celsius4. Battery life: approximately 5 hours5. Charging voltage: 5 volts 1 amp, 5 volts 2 amp6. Compatible products: for DJI Avata / DJI FPV / DJI Goggles 2 / DJI FPV Goggles V27. Emission power (EIRP):-2.4 GHz: less than or equal to 28.5 dBm (FCC), less than or equal to 20 dBm (CE/SRRC/MIC)-5.8 GHz: less than or equal to 31.5 dBm (FCC), less than or equal to 19 dBm (SRRC), less than or equal to 14 dBm (CE)8. Weight: approx. 167 gramsPackage List:Controller × 1Hand strap × 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 18cm * 12cm * 8cm / 7.09inch * 4.72inch * 3.15inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs40HQ: 412 cartons * 146 pcs = 60152 pcs
£79.99
-
WAVESHARE 0.96 inch Transparent OLED Display Module 128 x 64 Resolution SPI/I2C Interface SSD1312 Driver IC, WAVESHARE 33163
1. Operating voltage: 3.3V 2. Resolution: 128 x 64 pixels 3. Display panel: OLED 4. Pixel size: 0.15 x 0.15 mm 5. Controller chip: SSD1312 6. Communication interface: 4-wire SPI (default) / I2C (switchable via solder pads) 7. Display size: 1.086 x 2.174 cm 8. Product size: about 2.2 x 4.235 cmSpecification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 8cm * 6cm * 4cm / 3.15inch * 2.36inch * 1.57inch Qty per Carton 384 Carton Weight 5.00kgs / 11.02lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 384 pcs = 158208 pcs40HQ: 958 cartons * 384 pcs = 367872 pcs
£7.99
-
8BitDo 8BitDo Arcade Stick V3 Bluetooth Wired Wireless Tri-Mode Gaming Controller
1. Dynamic LED Button Labels: The button labels change based on the selected operating mode, making it easy for players to quickly memorize the button layout.2. Multiple Connection Methods: Supports Bluetooth, 2.4GHz wireless, and USB wired connections.3. Retro-Chic Minimalist Design: Features significant hardware upgrades, including customizable P1 and P2 buttons and a more intuitive mode-switching dial. It retains the classic NES color scheme and blends retro elements into its design, evoking nostalgic memories.4. Play Anywhere: Compatible with a wide range of platforms and devices. In addition to Bluetooth and 2.4GHz wireless, it supports USB wired connections. Firmware updates allow for new operating modes or support for additional devices.Specifications:1. Connection Methods: Bluetooth, 2.4GHz wireless, USB wired2. Power Source: 1000mAh lithium-polymer battery3. Charging Time: Approx. 4 hours4. Battery Life: Approx. 40 hours via 2.4GHz connection; approx. 30 hours via Bluetooth connection5. Dimensions: 303 x 203 x 111.5 mm6. Weight: 2.1 kgSpecification: Package Weight One Package Weight 2.58kgs / 5.68lb One Package Size 36cm * 25cm * 15cm / 14.17inch * 9.84inch * 5.91inch Qty per Carton 4 Carton Weight 11.29kgs / 24.89lb Carton Size 38cm * 52cm * 32cm / 14.96inch * 20.47inch * 12.6inch Loading Container 20GP: 421 cartons * 4 pcs = 1684 pcs40HQ: 979 cartons * 4 pcs = 3916 pcs
£68.99
-
WAVESHARE WAVESHARE 5 Inch HDMI LCD (B) 800x480 Touch Screen for Raspberry Pi Supports Various Systems, 5 Inch HDMI LCD (B)
1. 800 x 480 high resolution,Resistive touch control 2. Supports Raspberry Pi 3. Supports popular mini-PCs like Raspberry Pi, BB Black, etc. 4. Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen 5. Backlight can be turned off to lower power consumption Specification: Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 15cm * 10cm * 2cm / 5.91inch * 3.94inch * 0.79inch Qty per Carton 90 Carton Weight 21.80kgs / 48.06lb Carton Size 32cm * 32cm * 32cm / 12.6inch * 12.6inch * 12.6inch Loading Container 20GP: 813 cartons * 90 pcs = 73170 pcs40HQ: 1889 cartons * 90 pcs = 170010 pcs
£34.99
-
TROS TROS KS-5Drive Potent Booster for Jeep Wrangler JK 2007-2017 Electronic Throttle Controller, For Jeep Wrangler JK
Product Main Features: 1. Shorten the response speed of the electronic throttle 2. Improve the electronic throttles sensitivity 3. Plug and play without external power supply 4. 5 modes: sports mode / economy mode / original mode / manual mode / automatic mode 6. Super bright LED digital display screen Product Function: 1. Sports mode: This mode will bring very strong sense of controlling the vehicle when driving, it is more suitable for the passionate drivers. 2. Economy mode: This mode is more stable for acceleration, suitable for those that are fond of mild driving and green hands. 3. Original mode: This means the booster had no impact on the vehicle. 4. Manual mode: This mode has the best sports sense, suitable for those that are fond of passionable driving. 5. Automatic mode: The default mode is manual movement mode.Specification: General Compatible with Jeep: Wrangler JK Package Weight One Package Weight 0.33kgs / 0.72lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 80 Carton Weight 25.90kgs / 57.10lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 80 pcs = 41760 pcs40HQ: 1212 cartons * 80 pcs = 96960 pcs
£58.99