Search results for "control module"
-
WAVESHARE WAVESHARE RP2350 Industrial Control Board 6-Channel Relay Module, Based On RP2350 Microcontroller, Supports Wxternal Interfaces RS485 And Pico, Without Wi-Fi Module
1. Based on the RP2350 main control chip, it supports external interfaces such as RS485 and Pico, and features built-in power isolation and optocoupler isolation protection circuits for enhanced safety, stability, and reliability.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.3. 12 programmable I/O (PIO) state machines for custom peripheral support.4. Built-in 520KB SRAM and 16MB on-chip Flash, using a Type-C interface for easy connection.5. Uses high-quality relays, allowing connection to loads: 10A 250V AC or 10A 30V DC.6. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.7. On-board Pico-compatible interface, compatible with some Raspberry Pi Pico expansion boards, facilitating the expansion of functions such as RTC, CAN, RS232, LoRa, and sensors.8. On-board terminal block power supply interface, supporting a wide voltage range of 7V~36V, convenient for industrial power supply use.9. On-board optocoupler isolation to prevent high-voltage circuits connected to the relay from interfering with the control chip.10. On-board digital isolation to prevent external signals from interfering with the control chip.11. On-board integrated power isolation provides a stable isolated voltage, requiring no additional power supply at the isolated end.12. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easily monitoring the devices operating status.13. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easily monitoring the devices operating status.14. DIN rail mountable ABS protective casing for easy installation and enhanced safety.15. USB 1.1 host and device support.16. Supports low-power sleep and hibernation modes.17. Can be recognized as a mass storage device via USB for drag-and-drop program downloading. 18. Provides 34 multi-functional GPIO pins19. Pins include 1 HSTX, 2 I2C, 2 UART, 8 12-bit ADC, and 24 controllable PWM channelsProduct parameters:1. Power supply voltage: 5V2. Functions: device power supply, USB communication, and firmware download, etc.3. Interface type: terminal block4. Direction control: hardware automatically detects and controls data transmission direction5. Interface protection: provides TVS tube protection, surge and electrostatic protection6. Matching resistor: default NC, 120R matching resistor reserved, can be enabled by jumper cap7. Contact type: one normally open, one normally closed8. Isolation type: optocoupler isolation9. RGB: colorful cool LED beads, customizable display colors10. PWR: power indicator light, lights up red when USB is connected and voltage is detected11. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface12. RXD: receive indicator light, lights up blue when data is received from the RS485 interface13. Power dupply range: 7V-36V14. Casing: rail-mounted ABS protective casing15. Dimensions: 145 x 90 x 40 mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 17cm * 12cm * 6cm / 6.69inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 3.20kgs / 7.05lb Carton Size 36cm * 38cm * 32cm / 14.17inch * 14.96inch * 12.6inch Loading Container 20GP: 609 cartons * 30 pcs = 18270 pcs40HQ: 1414 cartons * 30 pcs = 42420 pcs
£27.99
-
Waveshare Waveshare Modbus RTU 8-Channel RS485 Relay Module With Digital Input Multi Isolation Protection Circuits, 7~36V Power Supply
Waveshare Modbus RTU 8-Channel RS485 Relay Module with Digital Inputs An industrial-grade 8-channel relay module using RS485 communication and Modbus RTU, with isolated protection circuits and digital inputs. Designed for compatible industrial control applications requiring multi-channel relay switching, RS485 communication and protected signal interfaces. Auto Rotation 📸 More Product Photos 📦 Package Details Package Weight: 0.15kg Package Size: 20 × 12 × 6cm Included: 8-channel RS485 relay module as supplied 🔧 Key Specifications Supply: 7–36V Communication: RS485 Protocol: Modbus RTU Relay Channels: 8 Digital Input: 8DI, 5–36V Address: 1–255 Contact Load: ≤10A 250V AC / ≤10A 30V DC ⭐ MIRA SALES TIP Verify your supply voltage, RS485 wiring and required relay load before installation. Check the connected system's electrical specifications carefully. ✅ Key Benefits • 8-channel relay control • RS485 communication • Standard Modbus RTU • 8 digital inputs • Multiple protection and isolation circuits
£35.99
-
WAVESHARE WAVESHARE RP2350 Industrial Control Board 6-Channel Relay Module, Based On RP2350 Microcontroller, Supports Wxternal Interfaces RS485 And Pico, With Wi-Fi Module
1. Based on the RP2350 main controller, it supports external interfaces such as RS485 and Pico, and features built-in power isolation and optocoupler isolation protection circuits for enhanced safety, stability, and reliability.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.3. Equipped with a Raspberry Pi Radio Module 2, supporting Wi-Fi 4 wireless network and Bluetooth 5.2 (Wi-Fi module version only).4. Built-in 520KB SRAM and 16MB on-chip Flash. Uses a Type-C interface, eliminating concerns about correct plug orientation.5. Uses high-quality relays, allowing connection to loads: 10A 250V AC or 10A 30V DC.6. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.7. On-board Pico-compatible interface, compatible with some Raspberry Pi Pico expansion boards, facilitating the expansion of functions such as RTC, CAN, RS232, LoRa, and sensors.8. On-board terminal block power supply interface, supporting a wide voltage range of 7V~36V, convenient for industrial power supply use.9. On-board optocoupler isolation to prevent high-voltage circuits connected to the relay from interfering with the control chip.10. On-board digital isolation to prevent external signals from interfering with the control chip.11. On-board integrated power isolation provides a stable isolated voltage; no additional power supply is required for the isolated end.12. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.13. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.14. Rail-mounted ABS protective casing for easy installation and safer use.15. USB 1.1 host and device support.16. Supports low-power sleep and hibernation modes.17. Controllable via USB. Identified as a mass storage device for drag-and-drop program downloading18. 34 multi-functional GPIO pins19. 1 HSTX pin, 2 I2C pins, 2 UART pins, 8 12-bit ADC pins, and 24 controllable PWM channels20. 12 programmable I/O (PIO) state machines for custom peripheral supportProduct parameters:1. Power supply voltage: 5V2. Functions: device power supply, USB communication, and firmware download, etc.3. Interface type: terminal block4. Direction control: hardware automatically detects and controls data transmission direction5. Interface protection: provides TVS tube protection, surge and electrostatic protection6. Matching resistor: default NC, 120R matching resistor reserved, can be enabled with a jumper cap7. Contact type: one normally open, one normally closed8. Isolation type: optocoupler isolation9. RGB: colorful cool LED beads, customizable display colors10. PWR: power indicator light, lights up red when USB is connected and voltage is detected11. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface12. RXD: receive indicator light, lights up blue when data is received from the RS485 interface13. Power supply range: 7V-36V14. Casing: rail-mounted ABS protective casing15. Dimensions: 145 x 90 x 40 mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 17cm * 12cm * 6cm / 6.69inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 3.20kgs / 7.05lb Carton Size 36cm * 38cm * 32cm / 14.17inch * 14.96inch * 12.6inch Loading Container 20GP: 609 cartons * 30 pcs = 18270 pcs40HQ: 1414 cartons * 30 pcs = 42420 pcs
£32.99
-
Waveshare Waveshare 26756 Industrial 6-Channel ESP32-S3 WiFi Relay Module Supports WiFi / Bluetooth / RS485 control, 26756
1. Based on the ESP32-S3 microcontroller, featuring an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz.2. Integrates 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, offering superior RF performance.3. Uses a high-quality relay supporting loads up to 10A at 250V AC or 10A at 30V DC.4. Features an onboard isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.5. Includes an onboard Pico-compatible interface, supporting select Raspberry Pi Pico expansion boards to add functions such as RTC, CAN, RS232, LoRa, and sensors.6. Equipped with an onboard USB Type-C port for power supply and debugging, facilitating development.7. Features a terminal block power input supporting a wide voltage range (7–36V), suitable for industrial power applications.8. Incorporates onboard optocoupler isolation to prevent external high-voltage relay circuits from interfering with the control chip.9. Includes onboard digital isolation to protect the control chip from external signal interference.10. Features onboard integrated power isolation, providing stable isolated voltage without requiring an external power supply for the isolated side.11. Includes an onboard buzzer, RGB LED, and status indicators for power and RS485 TX/RX, allowing for easy monitoring of the devices operating status.12. Housed in a DIN-rail mountable ABS protective case for safe and convenient installation and use.Specification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 17cm * 11cm * 5cm / 6.69inch * 4.33inch * 1.97inch Qty per Carton 48 Carton Weight 16.50kgs / 36.38lb Carton Size 36cm * 42cm * 32cm / 14.17inch * 16.54inch * 12.6inch Loading Container 20GP: 551 cartons * 48 pcs = 26448 pcs40HQ: 1279 cartons * 48 pcs = 61392 pcs
£29.99
-
Waveshare Waveshare Modbus RTU 32-Ch Relay Module RS485 Interface With Multiple Isolation Protection Circuits, 25140
1. This product is an industrial 32-channel relay module controlled via an RS485 interface. It utilizes the Modbus RTU protocol and features built-in protection circuits—including power isolation, magnetic coupling isolation, resettable fuses, and TVS—housed in an ABS DIN-rail mount enclosure. Easy to operate, the module offers high-speed, stable, reliable, and secure communication, making it suitable for a wide range of industrial control equipment and applications with demanding communication requirements. 2. Supports configurable device addresses (1–255) for cascading multiple devices via the RS485 bus; features "flash-on" and "flash-off" functions, allowing the relay to be controlled via commands to turn on or off automatically after a set duration.3. Onboard voltage regulator chip supports a wide input voltage range of 7–36V.4. Onboard integrated power isolation provides stable isolated voltage; the isolated side requires no external power supply.5. Onboard integrated magnetic coupling isolation ensures signal isolation with high reliability, strong anti-interference capabilities, and low power consumption.6. Onboard resettable fuse and TVS (Transient Voltage Suppressor) effectively suppress surge voltages and transient voltage spikes, providing protection against overcurrent, overvoltage, lightning, and ESD.7. Onboard optocoupler isolation prevents interference from the relays high-voltage circuits.8. Uses a dedicated relay driver chip with built-in flyback diode protection for stronger, more stable driving performance.9. Onboard reverse-polarity protection circuit prevents circuit damage caused by incorrect positive/negative terminal connections.10. Uses high-quality relays; supports loads up to 10A 250V AC or 10A 30V DC.11. Rail-mount ABS protective enclosure ensures convenient installation and enhanced safety.12. Three external LED indicators allow for easy monitoring of MCU status and signal transmission/reception status.Specifications:1. Operating voltage: 7–36V2. Communication interface: RS4853. Communication baud rate: 4800, 9600, 19200, 38400, 57600, 115200, 128000, 2560004. Default communication format: 9600, N, 8, 15. Number of relay channels: 326. Contact type: One Normally Open (NO), One Normally Closed (NC)7. Contact load: ≤10A 250V AC or ≤10A 30V DC8. Modbus protocol: Standard Modbus RTU Protocol9. RS485 Address Setting: 1–25510. Indicator LightsSTA: MCU indicator; flashes when the MCU is operating normallyTXD: Transmit indicator; lights up when transmitting dataRXD: Receive indicator; lights up when receiving dataSpecification: Package Weight One Package Weight 0.77kgs / 1.71lb One Package Size 32cm * 13cm * 8cm / 12.6inch * 5.12inch * 3.15inch Qty per Carton 15 Carton Weight 12.70kgs / 28.00lb Carton Size 34cm * 38cm * 42cm / 13.39inch * 14.96inch * 16.54inch Loading Container 20GP: 491 cartons * 15 pcs = 7365 pcs40HQ: 1140 cartons * 15 pcs = 17100 pcs
£65.99
-
Waveshare Industrial 8-Ch Ethernet Digital Input / Output Module Modbus RTU / TCP Protocol, Supports PoE Power Supply, 33917
1. Onboard voltage regulation chip, supporting a wide voltage range from 7V to 36V, and supporting PoE Ethernet power supply2. Supports control via MQTT protocol, providing Alibaba Cloud MQTT application routines3. Onboard integrated power isolation, capable of providing stable isolated voltage, and the isolated end does not require additional power supply4. Input features bidirectional optocoupler isolation, supporting passive and active switch input, built-in anti-jitter algorithm, relays support switch input linkage mode or inversion mode control5. Output uses Darlington, with optocoupler isolation, stronger driving capability, with a driving current of up to 500mA, and built-in reverse current diode protection6. Output has flash-on and flash-off functions, can be set with parameters in the instruction, automatically turns off after a certain period of time after the output is turned on7. Rail-mounted enclosure design, convenient installation, safer to use8. External indicator light, convenient for checking input/output status, MCU status and signal transmission/reception status9. Size: about 14.5 x 9 x 4 cmPackaging list:- Modbus POE ETH IO 8CH host unit x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 18cm * 12cm * 6cm / 7.09inch * 4.72inch * 2.36inch Qty per Carton 40 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 40 pcs = 17520 pcs40HQ: 1018 cartons * 40 pcs = 40720 pcs
£42.99
-
XY-LJ02 6-30V Micro USB Digital LCD Display Time Delay Relay Module Control Timer Switch
Features1. With LCD display, the current mode and parameters are clear at a glance, very clear, simple and practical. 2. Support high and low level trigger, switch control, suitable for most occasions. 3. Wide voltage power supply (6~30V) supports micro USB 5.0V power supply, which is very convenient to use. 4. Support UART data upload and parameter setting. 5. There is a key emergency stop function (STOP key), with reverse connection protection, reverse connection will not burn. 6. Added sleep mode. After enabling, if there is no operation within 5 minutes, the LCD backlight will be automatically turned off; any key will wake up. 7. Different OP, CL, LOP parameters can be set, these parameters are independent of each other and saved separately. 8. All setting parameters are automatically saved after power off.Specification1. Working voltage: 6-30V, support micro USB 5.0V power supply 2. Trigger signal source: high level trigger (3.0V~24V), low level trigger (0.0V~0.2V), switch control (passive switch). 3. Output capability: can control equipment within DC 30v 5A or AC 220v 5A 4. Quiescent current: 15mA Working current: 50mA 5. Working temperature: -40a??85 degrees Celsius 6. With optocoupler isolation, enhance anti-interference ability, industrial-grade circuit board, set parameters will be remembered forever after power off 7. Size: 8.0x3.8x1.9cm 8. Weight: about 36gSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 10cm * 2cm / 3.94inch * 3.94inch * 0.79inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 42cm * 32cm / 16.54inch * 16.54inch * 12.6inch Loading Container 20GP: 472 cartons * 200 pcs = 94400 pcs40HQ: 1096 cartons * 200 pcs = 219200 pcs
£2.99
-
Waveshare Waveshare 32152 Industrial 1-Channel ESP32-S3 WiFi Relay Module Supports WiFi / Bluetooth / RS485 Control, 32152
1. Based on the ESP32-S3 microcontroller, featuring an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz2. Integrates 2.4GHz Wi-Fi and Bluetooth 5 (LE) dual-mode wireless communication with excellent RF performance3. Uses a high-quality relay supporting loads up to 10A at 250V AC or 10A at 30V DC4. Features an onboard isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors5. Includes an onboard RTC chip to support scheduled tasks6. Equipped with an onboard USB Type-C port for power supply, firmware downloading, and debugging7. Includes an onboard terminal block for power input (supports 5V power supply only)8. Features onboard optocoupler isolation to prevent external high-voltage relay circuits from interfering with the control chip9. Includes onboard digital isolation to prevent external signals from interfering with the control chip10. Features onboard integrated power isolation to provide stable isolated voltage; no additional power supply is required for the isolated side11. Includes onboard RS485 transceiver indicators for easy monitoring of device operating status12. Comes with a DIN-rail mountable protective enclosure for convenient installation and enhanced safetySpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 32cm * 30cm / 19.69inch * 12.6inch * 11.81inch Loading Container 20GP: 555 cartons * 100 pcs = 55500 pcs40HQ: 1289 cartons * 100 pcs = 128900 pcs
£17.99
-
HW-281A DC 5V 8-Channel Relay Expansion Board Module Control Panel with Indicator PLC Relay, 8-Channel Relay Module
1. Applicable to various platforms such as 51/AVR/AVR/ARM2. Using high current relay, AC250V/10A, DC30V/10A3. Independent wiring of the contact part, safe and reliable4. Standard interface, which can be expanded on various development boards5. With fixing screw holes for easy installation6. Size: 138x56x19.3mmSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 100 Carton Weight 21.00kgs / 46.30lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 100 pcs = 56600 pcs40HQ: 1314 cartons * 100 pcs = 131400 pcs
£2.99
-
2700W REX-C100 Thermostat + Heat Sink + Thermocouple + SSR-25 DA Solid State Module Intelligent Temperature Control Kit, 25DA
Thermostat parameters: 1. Voltage: 220V 2. Opening size: 45x45mm 3. Control method: PID control 4. Input method: K/EPT100 (optional) 5. Output mode: SSR solid state relay 6. Product size: 48x48x110mm Solid state module parameters: 1. Control method: DC control AC 2. Input voltage: 3-32V DC 3. Ambient temperature: -30 degrees Celsius to +70 degrees Celsius 4. Working frequency: 50-60Hz 5. Control current: 3-35mADC 6. Product size: 45x27x58mm 7. Product weight: 81g Screw type thermocouple parameters: 1. Model: K type 2. Screw specification: M6 inch 3. Lead length: 1 meter 4. Measuring range: 0-400 degrees Celsius 5. Wiring terminal: U-shaped terminal 6. Product weight: 16g Heat sink parameters: 1. Material: aluminum 2. Size: 50x50x82mm 3. Hole distance: 48mm 4. Product weight: 61g Specification: Package Weight One Package Weight 0.43kgs / 0.94lb One Package Size 13cm * 9cm * 6cm / 5.12inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 22.00kgs / 48.50lb Carton Size 47cm * 32cm * 28cm / 18.5inch * 12.6inch * 11.02inch Loading Container 20GP: 633 cartons * 50 pcs = 31650 pcs40HQ: 1470 cartons * 50 pcs = 73500 pcs
£5.99
FAQs & Shopping Guide Part 200
Read more
FAQs & Shopping Guide Part 230
Read more