Generic or Third Party Components For DJI Avata Series
-
Sunnylife For DJI Avata 2 Sunnylife Drone Anti-Collision Protective Cover, Back Plate, Propeller Ring Stripes
AT2-KC820Features:1. Anti-collision & Anti-damage. The anti-collision TPU stripes Increasing tenacity and make your drone safer.2. Lightweight Design. The protective rings weight only 28g, hardly affects flying endurance.3. Especially Designed for Avata 2. The propellers protectors perfectly fit for Avata 2 and durable to use.Specifications:1. Name: Sunnylife Propeller Guard Protector2. Model: AT2-KC8203. Applicable Models: Dor DJI AVATA 24. Material: TPU5. Net Weight: 28gAT2-P821Features:1. Anti-scratch under Turtle Mode. The protective plate prevents Avata 2 from scratch and bumps under turtle mode.2. Bump-proof Hard Material. The protective plate can effectively relieve shock force and protect drone.3. Sturdy & Lightweight. The protector is only 10g, which will not increase much burden on drone.4. Locked by Screws & Stable Installation.Specifications:1. Name: Sunnylife Protective Plate2. Applicable Models: Avata 23. Model: AT2-P8214. Material: PlasticSpecification: General Compatible with DJI: Avata 2 Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 11cm * 1cm / 5.91inch * 4.33inch * 0.39inch Qty per Carton 200 Carton Weight 6.00kgs / 13.23lb Carton Size 45cm * 22cm * 32cm / 17.72inch * 8.66inch * 12.6inch Loading Container 20GP: 841 cartons * 200 pcs = 168200 pcs40HQ: 1954 cartons * 200 pcs = 390800 pcs
£3.99 - £6.99
-
STARTRC For DJI Avata 360 STARTRC Geomagnetic Air-Dropping System Thrower Parabolic
1. This geomagnetic-sensing airdrop device is custom-designed for the Avata 360. Molded from the actual drone, it fits the underside precisely. Weighing approximately 42g (net product weight), it does not obstruct the downward-facing infrared sensor system; it is easy to install and does not interfere with normal flight. 2. It enables targeted airdrops. Programmed settings allow the drone to execute a release maneuver at any point within remote control range, specifically, the Avata 360 rotates in place for 10 seconds before releasing the payload. Operation is simple and intuitive. 3. Maximum payload is approximately 150g (combined weight of the device and the payload must be under 200g; optimal payload range is 100a??150g). It features a built-in 100mAh battery that charges fully in one hour and supports approximately 400 uses on a single charge. 4. It features a snap-on design for quick installation and removal. The payload remains secure during flight without accidental detachment. Upon release, the drone maintains rock-solid stability, no pitching, altitude loss, or wobbling, ensuring a safe and reliable operation. 5. Suitable for a wide range of scenarios, including advertising, bait dropping, gift delivery, wedding flower or ring delivery, food delivery, emergency medical supply drops, family reunions, and celebrations like Halloween, Christmas, Valentine Day, birthdays, and beach parties, adding endless fun to life. Note: In 360-degree panoramic mode, the airdrop device will appear in the frame, whereas in single-lens mode, it will not. Since the primary goal during an airdrop mission is "precision delivery" while the drone hovers, the panoramic mode (360-degree capture) is not only unnecessary but would actually ruin the footage by including the device in the shot.Package List1. Geomagnetic Airdrop Device x 1 2. Airdrop Device Accessory Kit x 1 3. Charging Cable x 1 4. User Manual x 1Specification: General Certificate MSDS Compatible with DJI: Avata 360 Package Weight One Package Weight 0.11kgs / 0.24lb One Package Size 10cm * 10cm * 7cm / 3.94inch * 3.94inch * 2.76inch Qty per Carton 100 Carton Weight 10.00kgs / 22.05lb Carton Size 52cm * 33cm * 35cm / 20.47inch * 12.99inch * 13.78inch Loading Container 20GP: 444 cartons * 100 pcs = 44400 pcs40HQ: 1030 cartons * 100 pcs = 103000 pcs
£19.99
-
STARTRC For DJI Avata 360 STARTRC Gimbal Lens Anti-collision Plastic Guard Bumper
1. A gimbal lens safety bar specifically designed for the Avata 360. Its precise angle design ensures a perfect fit to the gimbal. Whether using panoramic or single-lens mode, the safety bar remains below the lens field of view and will not appear in the frame. With the safety bar in place, switching modes will not affect recording quality. 2. Constructed from high-strength aerospace-grade aluminum alloy in a single piece, its rigidity far surpasses that of plastic parts or ordinary carbon fiber. The surface undergoes an oxidation treatment, preventing fading and rust. The entire pair weighs only 30g (one pair, net weight as per product specifications), lightweight without increasing flight load or sacrificing battery life, allowing for worry-free and enjoyable flight. 3. The unique curved lens enclosure design effectively absorbs and disperses impact force in the event of a rollover, overturning, or collision, firmly securing the expensive camera on the gimbal. This significantly extends the gimbal lifespan. 4. The safety bar is securely fastened with precision screws (screwdriver and spare screws are included in the package), locking firmly into the frame after installation. This means that during rapid flight, high-speed maneuvers, or sudden braking, the safety bar will not cause a rolling shutter effect due to its own movement. The precisely molded screw positions will not scratch the drone body during installation or removal. 5. The installation of the safety bar does not affect the installation and removal of the original gimbal protective cover, eliminating frequent installation and removal steps. One-time installation provides long-term use, significantly improving portability and ease of use when switching between scenes. Note: This safety bar will not appear in the panorama mode, ensuring smooth flight shooting and recording. With this anti-collision ring, it can be stored in a STARTRC waterproof case or a one-piece molded PU bag. The installation of the safety bar does not affect the installation, removal, and use of the gimbal protective cover.Specification: General Compatible with DJI: Avata 360 Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 12cm * 9cm * 2cm / 4.72inch * 3.54inch * 0.79inch Qty per Carton 200 Carton Weight 6.50kgs / 14.33lb Carton Size 47cm * 42cm * 25cm / 18.5inch * 16.54inch * 9.84inch Loading Container 20GP: 540 cartons * 200 pcs = 108000 pcs40HQ: 1254 cartons * 200 pcs = 250800 pcs
£10.99
-
STARTRC For DJI Avata 360 STARTRC Light Anti-Sink Floating Propeller Guard Bumper, For DJI Avata 360 (Orange)
Features1. Specifically designed bumper guard for DJI Avata 360 propeller protector, featuring a precision angle structure that perfectly conforms to the drone body. Whether shooting in panoramic mode or single-lens mode, the guard always stays below the camera field of view, ensuring it never appears in footage. At the same time, it provides effective cushioning and protection for the Avata 360 propeller guard. (Key selling points: "Invisible Protection" and "Full View Hidden, Zero Intrusion in Footage", allowing users to fly confidently in panoramic mode without affecting shooting performance.) 2. Made of high-density EVA foam, weighing only 40g per pair (subject to actual product specs). The lightweight design adds no noticeable burden to the drone, preserves flight time, and maintains precise control, delivering a truly "no-feel" protective experience. 3. Fortress-style full-coverage design offers excellent elastic cushioning performance. Upon impact with walls or branches, the bumper absorbs shock energy through deformation, like an airbag, effectively protecting the motor shaft and drone structure from internal damage. The soft yet durable material resists deformation and breakage, ensuring long service life and reduced maintenance costs. 4. Snap-on quick installation design requires no tools. Simply align and press to secure; to remove, release the buckle by hand. The entire process is tool-free and efficient. The EVA material prevents scratches during installation or removal, greatly improving portability and convenience for outdoor use and quick scenario switching. 5. High-visibility orange color enhances detection in complex environments such as grass, forests, or water surfaces, making it easier to locate the drone in case of accidental drops. The secure snap-fit structure ensures a tight attachment that wonot loosen or fall off during flight, enabling worry-free operation.Note1. The bumper guard remains invisible in panoramic mode and does not interfere with shooting or recording. 2. When installed, it is not compatible with STARTRC waterproof cases or integrated PU storage bags. 3. Installation of the bumper does not affect the use or removal of the gimbal protector.Specification: General Compatible with DJI: Avata 360 Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 23cm * 13cm * 4cm / 9.06inch * 5.12inch * 1.57inch Qty per Carton 100 Carton Weight 15.00kgs / 33.07lb Carton Size 63cm * 47cm * 42cm / 24.8inch * 18.5inch * 16.54inch Loading Container 20GP: 214 cartons * 100 pcs = 21400 pcs40HQ: 497 cartons * 100 pcs = 49700 pcs
£9.99
-
BRDRC For DJI Avata BRDRC Gimbal Lens Anti-collision Aluminum Alloy Guard Bumper
1. Unique bow-shaped design increases the collision resistance of the bumper, and more effectively protects the drone lens and gimbal in the event of a collision; 2. Made of lightweight aluminum alloy, it is light and has almost no effect on flight. The surface is oxidized and is not easy to fade or rust; 3. Minimalist installation, you only need to remove one screw on each side of the fuselage to install it. The installation holes are designed according to the shape of the drone, which is firm and reliable; 4. The outward expansion design means that the front end of the bumper exceeds the front end of the camera, which has little effect on the aerial photography of the flight; 5. The top extension protection protects the top parts of the drone to a certain extent when the drone is upside down on the ground; 6. It does not affect the installation of the gimbal cover, which is convenient and fast, saving time and effort. 7. Main material: aluminum alloy 8. Product size: 7.2 x 4.4 x 2.1cm 9. Net weight: 12g 10. Packing list: bumper (a pair) x 1, screws x 2, screwdriver x 1Specification: General Compatible with DJI: Avata Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 6cm * 4cm / 3.94inch * 2.36inch * 1.57inch Qty per Carton 200 Carton Weight 7.00kgs / 15.43lb Carton Size 52cm * 42cm * 25cm / 20.47inch * 16.54inch * 9.84inch Loading Container 20GP: 488 cartons * 200 pcs = 97600 pcs40HQ: 1133 cartons * 200 pcs = 226600 pcs
£9.99
-
BRDRC BRDRC Colorful Graffiti Headband Fixed Strap For DJI Aavta Goggles 2 / FPV Goggles V2
1. Elastic and adjustable in length, suitable for most people to wear; 2. Safety warning slogan design can effectively remind others not to disturb during flight, effectively improving flight safety; 3. The two ends are designed to be tight and safe, not easy to loosen or fall off; 4. The headband is designed with a battery strap hole, which is convenient and comfortable to use. 5. Main material: Nylon 6. Size: 53.5 x 4.7cm 7. Weight: 38.6gSpecification: General Compatible with DJI: Goggles 2, FPV Goggles V2 Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 10cm * 2cm / 5.91inch * 3.94inch * 0.79inch Qty per Carton 200 Carton Weight 10.00kgs / 22.05lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs40HQ: 885 cartons * 200 pcs = 177000 pcs
£2.99
-
For DJI Avata CQT 913407 Battery Body Contact TPU Dust-proof Plugs Moisture Protection Cover, 4PCS/Set
1. Effectively prevent dust from entering, dust-proof, moisture-proof and short-circuit proof2. Easy to install and not easy to fall off3. Made of TPU plastic material, soft and non-sticky, not easy to deform4. Closely fit with the interface, not easy to fall off, small and portable5. Material: Silicone6. Features: waterproof and dustproof, tight fit, lightweight and portable7. Specifications: battery dust plug x3 + body dust plug x18. Product size: 17 x 9 x 5mm9. Product weight: 1.5g/set10. Note: Only dust-proof plugs will be shipped, nothing else!Specification: General Compatible with DJI: Avata Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 6cm * 3cm * 2cm / 2.36inch * 1.18inch * 0.79inch Qty per Carton 500 Carton Weight 7.00kgs / 15.43lb Carton Size 47cm * 23cm * 15cm / 18.5inch * 9.06inch * 5.91inch Loading Container 20GP: 1644 cartons * 500 pcs = 822000 pcs40HQ: 3817 cartons * 500 pcs = 1908500 pcs
£2.99
-
Sunnylife Sunnylife Gimbal Lens Aluminum Anti-collision Bumper For DJI Avata, Sunnylife For DJI Avata(Red), Sunnylife For DJI Avata(Black)
1. Material: aluminum alloy2. All-round protection3. Suitable for: DJI Avata 4. Does not affect the installation and removal of the gimbal cover5. Protection bar will not appear in the lens screen, does not affect the aircraft shooting6. Aviation-grade aluminum alloy, high strength and hardness, light weight, durable7. Anti-collision upgrade, effective protection, in the crossing machine by the impact can effectively relieve the impact, reduce or avoid the gimbal damage8. Net weight: 5gSpecification: General Compatible with DJI: Avata Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 11cm * 2cm / 5.91inch * 4.33inch * 0.79inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 500 pcs = 222000 pcs40HQ: 1031 cartons * 500 pcs = 515500 pcs
£9.99
-
4 PCS / Set Sunnylife AT-MD475 Dust-proof Waterproof Aluminum Alloy Motor Cover For DJI Avata, Red, Black
1. Ultra-light aviation aluminum alloy, CNC finishing, does not affect the battery life2. The aluminum alloy has good thermal conductivity and will not affect the heat dissipation of the motor during flight3. Splash-proof, moisture-proof, dust-proof and bump-proof, extending the service life of the motor4. One-time installation, long-term use; does not affect the disassembly and assembly of the propeller, avoids repeated disassembly and assembly of the motor cover, and protects the motor at all times5. Applicable models: for DJI Avata6. Material: aluminum alloy7. Net weight: 8g (4 pcs/set)8. Gross weight: 18g (4 pcs/set)Specification: General Compatible with DJI: Avata Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 7cm * 7cm * 2cm / 2.76inch * 2.76inch * 0.79inch Qty per Carton 400 Carton Weight 1.20kgs / 2.65lb Carton Size 56cm * 35cm * 20cm / 22.05inch * 13.78inch * 7.87inch Loading Container 20GP: 680 cartons * 400 pcs = 272000 pcs40HQ: 1579 cartons * 400 pcs = 631600 pcs
£9.99
-
For DJI Avata Propeller Props Blade Replacement Light Weight Wing Fans, For DJI Avata Propeller
1. Translucent design, simple and beautiful.2. Precisely tested by dynamic balance to provide strong pulling force for the flying machine.3. Provide multi-directional protection for the aircrafts visual perception system against collision with foreign objects and dust.4. Protects the visual perception system from scratches during transportation and extends the life of the machine.5. Material: PC material6. Applicable models: Applicable to DJI Avata7. Weight: about 2.1g8. Diameter: 73.7 mmPacking list:Propeller × 2 pairsM2×7 screws × 8pcsSpecification: General Compatible with DJI: Avata Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 19cm * 10cm * 3cm / 7.48inch * 3.94inch * 1.18inch Qty per Carton 500 Carton Weight 17.00kgs / 37.48lb Carton Size 30cm * 50cm * 56.7cm / 11.81inch * 19.69inch * 22.32inch Loading Container 20GP: 313 cartons * 500 pcs = 156500 pcs40HQ: 727 cartons * 500 pcs = 363500 pcs
£9.99
-
Carrying Case Protective Storage Bag Travel Shoulder Bag, For DJI Avata 360 Motion Combo Gray, For DJI Avata 360 Fly More Combo Gray, For DJI Avata 360 Motion Combo Black, For DJI Avata 360 Fly More Combo Balck
1. Custom-designed specifically for the DJI Avata 360 series. The interior tray features a precision-molded 1:1 fit based on the actual device; scientifically partitioned to accommodate different kit configurations (such as the Motion Combo or Fly More Combo), it securely houses the aircraft, remote controller, and multiple flight batteries.2. Features a robust, fully enclosed, drop-resistant structure, combining a high-strength hard-shell exterior with a soft Lycra interior lining. This design effectively absorbs external impacts, safeguarding your precision equipment against damage even during challenging journeys.3. Offers excellent splash-resistance, providing protection against sudden light rain or dew during outdoor excursions and ensuring that the drone and electronic components inside the bag remain dry and secure at all times.4. Includes dedicated slots for the aircraft, controller, and batteries, while an internal mesh pocket provides storage for essential small accessories—such as propellers, charging hubs, and data cables—keeping your gear organized and easily accessible.5. Equipped with a reinforced, wear-resistant handle and an adjustable shoulder strap; the weight distribution is scientifically balanced to ensure a comfortable and effortless carrying experience, whether you choose to carry it by hand or over your shoulder.6. Weight: 1000gSpecification: General Compatible with DJI: Avata 360 Package Weight One Package Weight 1.20kgs / 2.65lb One Package Size 41cm * 14cm * 27cm / 16.14inch * 5.51inch * 10.63inch Qty per Carton 10 Carton Weight 14.00kgs / 30.86lb Carton Size 67cm * 42cm * 54cm / 26.38inch * 16.54inch * 21.26inch Loading Container 20GP: 175 cartons * 10 pcs = 1750 pcs40HQ: 407 cartons * 10 pcs = 4070 pcs
£15.99
-
For DJI Avata 2 Visual Obstacle Avoidance Under Fuselage Vision Traversing Drone Repair Part, Visual Obstacle Avoidance
1. Material: metal + plastic2. Applicable model: for DJI Avata 23. Reliable quality, tested before shipment, perfect performance4. Easy to install and use for replacing the original damaged or destroyed parts5. For Avata 2 to repair the RC drone and make it work properly6. Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair department7. Weight: about 20gSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 150 Carton Weight 4.10kgs / 9.04lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 150 pcs = 57150 pcs40HQ: 885 cartons * 150 pcs = 132750 pcs
£49.99
-
For DJI Avata 2 Gimbal Camera Lens Module With IMU Drone Repair Parts, For DJI Avata 2
1. Material: metal + plastic2. Applicable model: for DJI Avata 23. Reliable quality, can ensure long-term use4. Easy to install and use for replacing the original damaged or destroyed parts5. For Avata 2 to repair the RC drone and make it work properly6. Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair department7. Weight: about 30gSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 12cm * 5cm * 5cm / 4.72inch * 1.97inch * 1.97inch Qty per Carton 180 Carton Weight 8.30kgs / 18.30lb Carton Size 52cm * 38cm * 32cm / 20.47inch * 14.96inch * 12.6inch Loading Container 20GP: 421 cartons * 180 pcs = 75780 pcs40HQ: 979 cartons * 180 pcs = 176220 pcs
£122.99
-
For DJI Avata 2 ESC Board Assembly Drone Repair Parts, ESC Board
Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 150 Carton Weight 7.10kgs / 15.65lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 150 pcs = 57150 pcs40HQ: 885 cartons * 150 pcs = 132750 pcs
£60.99
-
For DJI Avata O3 Air Unit Camera Lens Module Drone Gimbal Camera Assembly Chip Spare Part, For DJI Avata O3
1. Material: metal + plastic2. Applicable model: for DJI Avata O33. Reliable quality, durability, assured use4. Repair parts, for accidental damage replacement use5. Easy to replace, easy to install, can be used as spare parts6. Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair departmentSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 10cm * 10cm / 4.72inch * 3.94inch * 3.94inch Qty per Carton 60 Carton Weight 7.10kgs / 15.65lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 60 pcs = 22860 pcs40HQ: 885 cartons * 60 pcs = 53100 pcs
£44.99
-
For DJI Avata ESC Traverser Drone ESC Board Accessories, For DJI Avata Drone ESC Board
1. Material: metal + plastic2. Applicable models: for DJI Avata drone3. The ESC board has the same function as the original, durable and wear-resistant, long service life4. Easy to assemble and use, can directly replace the original damaged old parts5. Convenient installation, exquisite craftsmanship, high quality for professional use6. Weight: about 30 gSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 270 Carton Weight 15.12kgs / 33.33lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 270 pcs = 140400 pcs40HQ: 1209 cartons * 270 pcs = 326430 pcs
£36.99
-
STARTRC For DJI Avata 360 STARTRC Upgraded Shoulder PU Storage Bag Motion-Sensing Fly Kit Handbag, For DJI Avata 360
1. Custom Design for Avata360 Sensory Flight Kit: Specifically designed to fit the Avata360, G-N3 goggles, FPV joystick, charging assistant with batteries, and 65W charger. The top mesh pocket offers additional custom storage for data cables, charging cables, spare propellers, and more. 2. Premium PU Material: Made with high-quality PU fabric, the outer shell is pressure-resistant, durable, and water-resistant. The interior features a Lycra double-layer fabric with shockproof padding to securely hold your drone and accessories in place, preventing collisions, friction, and pressure. It ensures long-lasting protection during transport or storage. 3. Organized Storage Design: The bag features a scientific partition design that ensures each accessory has its own place, making pre-flight preparations and post-flight storage easy and organized. Youa??ll be able to quickly swap batteries and propellers during shooting without missing a moment. 4. Precise Molded Design: The bag is tailored to perfectly fit each device, preventing movement and offering shock-absorbing cushioning during transport. The deep mesh pocket design further reduces friction between devices and the top lid, providing double protection during travel. 5. Dual Zipper and Convenient Carrying: The bag uses a dual zipper system for smooth and snag-free opening and closing. It features a retractable handle for easy handheld carrying, along with a shoulder strap for comfortable cross-body use. Whether for outdoor activities or daily storage, it is an excellent companion for travel and home use. Additional Notes: The drone compartment is compatible with the original gimbal protection cover, and can fit up to four batteries. The charging assistant compartment can store batteries as well, with space for a STARTRC-style crash guard.Specification: General Compatible with DJI: Avata 360 Package Weight One Package Weight 1.39kgs / 3.07lb One Package Size 44cm * 33cm * 15cm / 17.32inch * 12.99inch * 5.91inch Qty per Carton 4 Carton Weight 6.50kgs / 14.33lb Carton Size 62cm * 33cm * 45cm / 24.41inch * 12.99inch * 17.72inch Loading Container 20GP: 289 cartons * 4 pcs = 1156 pcs40HQ: 672 cartons * 4 pcs = 2688 pcs
£18.99
-
STARTRC For DJI Avata 360 STARTRC Portable Waterproof Suitcase Motion-Sensing Fly Kit Storage Box, For DJI Avata 360
Features1. Custom Design for AVATA 360: Specially designed waterproof storage case for the AVATA 360 Sensory Flight Kit. The case features a precise, custom-molded design that securely fits the AVATA 360, G-N3 goggles, battery-equipped charging assistant, FPV joystick, 65W charger, and two batteries. The lower compartment offers customizable storage with a double-layer design, compatible with the RC2 remote controller (with joystick), spare propellers, data cables, and more. Everything fits neatly in one case, so you can open it and fly right away. 2. Organized and Secure Storage: The storage box ensures that everything remains in place, preventing any movement or misalignment of your gear. No need to remove the lens protection cover or crash guard. The lid opens quickly for easy access, and the entire set is neatly stored for convenient transport, greatly enhancing travel and shooting efficiency. 3. Durable and Protective Materials: The outer case is made of tough PP material, which is wear-resistant, pressure-resistant, and shockproof. The interior is lined with custom EVA foam and sponge, with a precise molded design to securely hold your equipment. The top lid features elastic foam padding for added protection and shock absorption, ensuring full protection for your AVATA 360 and related accessories. 4. Easy-to-Use Latch Design: The case features a clasp opening system for quick and easy access. The built-in valve ensures that the internal space is sealed tightly, making the case waterproof and dustproof, keeping your products clean and dry. 5. Convenient Carrying Handle: The case comes with a comfortable, ergonomic handle for easy single-handed carrying. Ita??s perfect for outdoor activities like traveling and hiking, providing a safe and secure way to carry your gear. It can also be used for everyday protection and storage of your products, making it a great assistant for both travel and home use.Additional Notes1. The drone compartment accommodates the original gimbal protection cover and is compatible with the STARTRC crash guard. The charging assistant can also store batteries. The case is designed for the AVATA 360 Sensory Flight Kit, but it is suitable for all kits, providing ample storage for all included accessories. 2. The lower section of the case is designed to store the RC2 remote controller, even with the joystick attached. For added customization, you can fill the area with padding to store the remote control, spare propellers, and data cables. If not storing the remote controller, the compartment can be reconfigured to store other items. 3. The 65W charger compartment is divided into four sections for flexible, DIY storage. You can store the charger on the left and other accessories like lens replacement tools on the right.Specification: General Compatible with DJI: Avata 360 Package Weight One Package Weight 2.76kgs / 6.09lb One Package Size 44cm * 35cm * 19cm / 17.32inch * 13.78inch * 7.48inch Qty per Carton 4 Carton Weight 11.50kgs / 25.35lb Carton Size 70cm * 45cm * 40cm / 27.56inch * 17.72inch * 15.75inch Loading Container 20GP: 211 cartons * 4 pcs = 844 pcs40HQ: 491 cartons * 4 pcs = 1964 pcs
£37.99
-
DJI For DJI Avata 360 Original Charging Hub, Charging Hub
1. Supports charging three batteries at the same time. (Parallel charging requires the 65W Portable Charger or 100W USB-C Power Adapter. With an input of 65 W or higher, the hub supports parallel charging. Otherwise, it charges sequentially, prioritizing the highest battery level.)2. Compatibility: For DJI Avata 360 Intelligent Flight Battery3. Operating Temperature: 5-40 degrees Celsius (41-104 degrees Fahrenheit)4. Input: 5-20 V, max 5 A5. Output (Power Accumulation): Max 60 W6. Output (Charging): Max 17.2 V7. Output (USB): 30 W8. Tips: The charger is not included.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 90 Carton Weight 11.80kgs / 26.01lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 90 pcs = 37080 pcs40HQ: 958 cartons * 90 pcs = 86220 pcs
£54.99
-
For DJI Avata PULUZ 2pcs Tempered Glass Drone Lens Film, For DJI Avata
About The Product1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.Package List1. Tempered Glass Film x 2 2. Adhesive x 2 3. Lens Cloth x 2 4. Wet & Dry Wipes x 2Specification: General Compatible with DJI: Avata Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 14cm * 8cm * 1cm / 5.51inch * 3.15inch * 0.39inch Qty per Carton 200 Carton Weight 2.20kgs / 4.85lb Carton Size 42cm * 30cm * 22cm / 16.54inch * 11.81inch * 8.66inch Loading Container 20GP: 962 cartons * 200 pcs = 192400 pcs40HQ: 2233 cartons * 200 pcs = 446600 pcs
£0.99
-
JSR For DJI Avata 2 Traverser Filter Accessories Camera Scrim Polarizing Lens, JSR-2050-01 MCUV, JSR-2050-04 CPL, JSR-2050-05 ND8, JSR-2050-06 ND16, JSR-2050-07 ND32, JSR-2050-08 ND64, JSR-2050-09 ND256, JSR-2050-10 ND8PL, JSR-2050-11 ND16PL ...
1. The frame is made of high quality material, light weight and strong corrosion resistance, longer service life2. HD professional optical glass, with high durability and scratch resistance, multi-layer nano-coating process, can ensure clear imaging, to meet the shooting process of high pixel imaging standards3. Aviation aluminum frame material, sealed firmly, light weight, durable, will not affect the drone calibration or balance, no fading or rusting4. Double-sided multi-layer nano-coating process gives the lens high-quality waterproof, oil-proof, dirt-proof and scratch-proof performance5. Installation: quick release rotary mounting, tight fit6. Optical glass, precision grinding process, high-definition imaging, pure and colorless7. Size: about 25 x 2mm8. Weight: about 0.7gSpecification: General Compatible with DJI: Avata 2 Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 7cm * 8cm * 2cm / 2.76inch * 3.15inch * 0.79inch Qty per Carton 500 Carton Weight 6.00kgs / 13.23lb Carton Size 51cm * 38cm * 34cm / 20.08inch * 14.96inch * 13.39inch Loading Container 20GP: 404 cartons * 500 pcs = 202000 pcs40HQ: 939 cartons * 500 pcs = 469500 pcs
£4.99 - £40.99
-
For DJI Avata Carbon Fiber Backpack Shockproof And Waterproof Bag, For DJI Avata Carbon Fiber Backpack
1. Large capacity, very practical and convenient to use. Durable and wear-resistant, sturdy enough.2. Pre-cut foam holds everything in place to prevent scratches, collisions and drops.3. Adjustable shoulder straps and a side handle, you can easily carry the case in two ways.4. Highly resistant to pressure, drop and shock absorption, spill-resistant fabric, all-round protection for your equipment5. Two-way zipper, open and close smoothly without jamming6. Material: PC + ABS + Oxford cloth + EVA7. Weight: 1065g8. Size: 40 x 28 x 15cmSpecification: General Compatible with DJI: Avata Package Weight One Package Weight 1.15kgs / 2.53lb One Package Size 42cm * 29cm * 17cm / 16.54inch * 11.42inch * 6.69inch Qty per Carton 26 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 26 pcs = 4602 pcs40HQ: 412 cartons * 26 pcs = 10712 pcs
£17.99
-
DJI For DJI Avata 2 Original Body Frame Upper Shell Drone Repair Parts, Upper Shell
1. For DJI Avata 2 body frame upper shell2. Replace the damaged or unusable one with a new one3. Easy to install replacement parts4. Each item has been checked and is in good condition before shipping5. Repairing drones is complicated, please make sure you have professional repair skills or go to a professional repair departmentSpecification: General Compatible with DJI: Avata 2 Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 23cm * 22cm * 6cm / 9.06inch * 8.66inch * 2.36inch Qty per Carton 10 Carton Weight 2.10kgs / 4.63lb Carton Size 25cm * 46cm * 32cm / 9.84inch * 18.11inch * 12.6inch Loading Container 20GP: 724 cartons * 10 pcs = 7240 pcs40HQ: 1682 cartons * 10 pcs = 16820 pcs
£21.99
-
DJI Original Accessories Pack Intelligent Battery+Charging Manager for DJI Avata, Battery+Charging Manager
1. Built-in intelligent battery management system, real-time monitoring and feedback of battery status, full of energy, intelligent guardian2. Charging manager can charge 4 batteries in sequence at the same time3. Battery capacity: 2420 mAh4. Nominal voltage: 14.76V5. Charging limit voltage: 17V6. Battery type: Li-ion7. Energy: 35.71 watt-hours8. Discharge multiplier: 7C typical9. Charging manager recommended charger: DJI 65W portable charger or other chargers supporting USB PD fast charging protocol10. Charge manager input: 5-20V, up to 5A11. Charge manager output: 17V12. Ambient temperature: 5-40 degrees Celsius13. Adapted products: for DJI Avata14. Packing list: battery x 2, charging manager x 1Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 21cm * 10cm * 10cm / 8.27inch * 3.94inch * 3.94inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 98 pcs = 17346 pcs40HQ: 412 cartons * 98 pcs = 40376 pcs
£265.99
You have seen 24 out of 50 products