Voltage Stabilizer

1. Weight: 560g2. Output voltage: 14.5v3. Output current: 50AInstallation Precautions:1. The rectifier should be installed in a location with good ventilation and good heat dissipation. High temperature will be generated when the rectifier is working, and poor heat dissipation will damage the rectifier2. The installation steps of the rectifier are to connect the AC input line, the positive and negative output are not connected, start the locomotive, measure the positive and negative output voltage, and when the voltage range is reasonable, plug in the positive and negative wires, and then test the positive and negative of the battery or rectifier If the voltage range is unreasonable, stop using it and give feedback. The entire installation process should be recorded and saved.3. Note that the rectifier should be closely attached to the frame when installing it, which is conducive to heat conduction. You can also add thermally conductive glue between the rectifier and the frame4. Do not press other wires between the rectifier and the frame5. There should be a fuse protection device between the positive outlet of the rectifier and the battery to prevent the rectifier from being damaged and the voltage is too high and other electrical components are burnt outApplicable models:For CAN-AM ATV Outlan r 800R EFI XT-P DPS FH019AA 710001191For 2015 Can-Am Comman r 800 4X4For 2015 Can-Am Comman r 800 4x4 DPSFor 2015 Can-Am Comman r 800 4x4 XTFor 2015 Can-Am Comman r 800 4x4 XT rear opening differentialFor 2014 Can-Am Comman r 800 4X4For 2014 Can-Am Comman r 800 4x4 DPSFor 2014 Can-Am Comman r 800 4x4 XTFor 2014 Can-Am Comman r 800 4x4 XT rear opening differentialFor 2011 Can-Am Comman r 800 4x4 XTFor 2017 Can-Am Comman r 800R 4X4For 2017 Can-Am Comman r 800R 4x4 DPSFor 2017 Can-Am Comman r 800R 4x4 XT DPSFor 2016 Can-Am Comman r 800R 4X4For 2016 Can-Am Comman r 800R 4x4 DPSFor 2016 Can-Am Comman r 800R 4x4 XT Camouflage DPSFor 2016 Can-Am Comman r 800R 4x4 XT DPSFor 2015 Can-Am Comman r 800R 4X4For 2015 Can-Am Comman r 800R 4x4 DPSFor 2015 Can-Am Comman r 800R 4x4 XTFor 2013 Can-Am Comman r 800R 4x4 DPS EFISpecification: General Compatible with CAN-AM: Commander 800 Package Weight One Package Weight 0.60kgs / 1.33lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 50 Carton Weight 30.00kgs / 66.14lb Carton Size 44cm * 36cm * 18cm / 17.32inch * 14.17inch * 7.09inch Loading Container 20GP: 935 cartons * 50 pcs = 46750 pcs40HQ: 2171 cartons * 50 pcs = 108550 pcs

Read more less

1. Size: about 15.5x11.5x5 cm2. Weight: about 150 grams3. Material: Plastic4. Voltage: 12V5. Current: 3.6A6. Luminous flux: 35W7. Adapted bulb: D2S/R8. Applicable models: suitable for Audi A6/S6 2005-2008, suitable for Audi A8/S8 2004-2008, suitable for BMW 5 series (E60) 2003-2005, suitable for BMW 7 series (E65 E66 E67 E68) 2002 -2004, suitable for BMW X5 (E53) 2004-2006, suitable for BMW Z4 (E85 E86) 2003-2007, suitable for Chrysler Pacifica 2004-2006, suitable for Ford Focus 2002-2006, suitable for Jaguar S type 2002-2007 , Suitable for Jaguar X type 2002-2007, suitable for Land Rover Range Rover Sport 2006, suitable for Mercedes CLS class (W219) 2006-2008, suitable for Mercedes E class (W211) 2003-2006, suitable for Mercedes ML class (W164 ) 2002-2008, applicable to Mercedes GL class (X164) 2007-2008, applicable to Mercedes R class (W251) 2006-2008, applicable to Mercedes SLK class (R171) 2005-2008, applicable to Saab 9-3 2003-20079. Features: Use C-BUS smart chip, highly compatible with the original car equipment, can well inhibit the interference to the original car computer, fully automatic patch packaging, the defect rate is less than 1a?°, built-in high-quality surface mount and Through-hole components are directly inserted and played, instead of replacing original car parts10. OE: 5DD00831910Specification: General Compatible with Audi: S6, A6 Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15.5cm * 11.5cm * 5cm / 6.1inch * 4.53inch * 1.97inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs40HQ: 412 cartons * 146 pcs = 60152 pcs

Read more less

1. For Yamaha start relay 2. Material: Copper 3. Size: 4.5 x 5.2 x 3.5cm 4. Packaged: 1 x Starter relay ,2 x 30A fuse 5. Application,the following is just for reference. OEM: 4SV-81940-00 / 1D0-81940-02 /4XE-81940-12 YFM Grizzly 350cc (2007-2014) YFM Raptor 350cc (2005-2013) YFM Big Bear 400cc (2000) YFM Grizzly 660cc (2002-2008) YFM Rhino 660cc (2004-2006) YFM Grizzly 450cc (2007-2014) YFM Kodiak 450cc (2003-2006) YFM Grizzly 400cc (2007-2014) YFM Bruin 350cc (2004-2006) YFM Big Bear 400cc (2001-2012) YFM Raptor 660cc (2001-2005) YFM Bear Tracker 250cc (2000-2004) YFM Big Bear 250cc (2007-2009) YFM Bruin 250cc (2005-2006) YFM Kodiak 400cc (2000-2006) YFM Wolvorine 350cc (2006-2009) YFM Wolverine 450cc (2006-2010) OEM: 4YR-81940-02 / 4SV-81940-12 /4YR-81940-00 / 4BH-81940-01 XTZ Super Tenere 1200 2012 a 2014 XV Road Star 1700 2006 a 2009 XV Road Star 1600 1999 a 2007 XV Road Star Warrior 1700 2002 a 2004 XVS V-Star 650 1998 a 2015 XVZ Royal Star 1300 1999 a 2013 VMX V-MAX 1700 2009 a 2014 VT Venture 600 2001 a 2005 FJR 1300 2006 a 2007 FZ6 R 600 2009 a 2014 FZ6 600 2004 a 2009 FZS 1000 2001 a 2004 GTS 1000 1993 a 1994 SXV Viper 700 2003 a 2006 TTR 90 2006 a 2007 TTR 230 desde 2006 TTR 125 desde 2007 XT R / X 125 2007 a 2011 XT 250 desde 2013 XVZ 1300 de 1997 a 2000 YBR 125 de 2005 a 2012 YZF R1 1000 2007 a 2008Specification: General Compatible with Yamaha: YFM250 Package Weight One Package Weight 0.14kgs / 0.30lb One Package Size 8cm * 6cm * 6cm / 3.15inch * 2.36inch * 2.36inch Qty per Carton 120 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 36cm * 36cm / 22.05inch * 14.17inch * 14.17inch Loading Container 20GP: 367 cartons * 120 pcs = 44040 pcs40HQ: 852 cartons * 120 pcs = 102240 pcs

Read more less

1) With this DC transformer, you can transform a high input voltage into a low output voltage with output current of 20A 2) Input DC voltage: 24V 3) Output DC voltage: 12V 4) Rated output current: 20A 5) Easy and safe to use, with overheating and over current protection 6) Material: Aluminum alloy casing 7) Size: 112 x 110 x 43mm 8) Weight: 299gSpecification: Package Weight One Package Weight 0.40kgs / 0.88lb Qty per Carton 40 Carton Weight 14.20kgs / 31.31lb Carton Size 25cm * 23cm * 45cm / 9.84inch * 9.06inch * 17.72inch Loading Container 20GP: 1030 cartons * 40 pcs = 41200 pcs40HQ: 2392 cartons * 40 pcs = 95680 pcs

Read more less

1) With this DC transformer, you can transform a high input voltage into a low output voltage with output current of 10A 2) Input DC voltage: 24V 3) Output DC voltage: 12V 4) Rated output current: 10A 5) Easy and safe to use, with overheating and over current protection 6) Material: Aluminum alloy casing 7) Size: 112 x 72 x 43mm 8) Weight: 181gSpecification: Package Weight One Package Weight 0.19kgs / 0.41lb Qty per Carton 40 Carton Weight 9.10kgs / 20.06lb Carton Size 24cm * 30cm * 24cm / 9.45inch * 11.81inch * 9.45inch Loading Container 20GP: 1543 cartons * 40 pcs = 61720 pcs40HQ: 3582 cartons * 40 pcs = 143280 pcs

Read more less

1.100% high quality and brand new 2. Light weight and ultra-compact size 3. Full power, synchronous rectification, efficiency conversion rate: more than 90% 4. Built-in over/under-voltage input, overload, over-heat and short circuit fully protection 5. Auto-recovery when converter is back to normal operating 6. Stable and reliable performance 7. Easy and simple installationSpecification: General Material ABS, Aluminum Input Voltage 15-40V Output Voltage 12V Output Current 5A Voltage Output Power 60W Size 5.9*2.4*2.1cm Weight 40g Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 18cm * 10cm * 2cm / 7.09inch * 3.94inch * 0.79inch Qty per Carton 200 Carton Weight 11.50kgs / 25.35lb Carton Size 52cm * 38cm * 42cm / 20.47inch * 14.96inch * 16.54inch Loading Container 20GP: 321 cartons * 200 pcs = 64200 pcs40HQ: 745 cartons * 200 pcs = 149000 pcs

Read more less

1) Color: Transparent purple 2) Fit for all DC12V cars 3) Purifies / stabilizes power supply 4) Improves ignition efficiency, saves fuel 5) Enhances horsepower 3~8P 6) Faster speed up / smoother idling / faster kick down reaction / faster throttle response 7) Mend the powerlessness when air conditioning activated 8) Stabilize the voltage 9) Decreases both circuitry noise and high frequency impedance 10) Shortens the car engine start time 11) Offers a more stable supply of voltage to all electronic device 12) Connection Cable Length: 38cm 13) Package Includes: - 1 x Voltage stabilizer - 5 x Zip ties - 2 x Sticker - 1 x mounting bracket - 3 x Screws - 1 x Chinese / Japanese user manualSpecification: Package Weight One Package Weight 0.45kgs / 0.99lb One Package Size 24.8cm * 14.2cm * 6.2cm / 9.76inch * 5.59inch * 2.44inch Qty per Carton 20 Carton Weight 10.40kgs / 22.93lb Carton Size 50cm * 30cm * 32cm / 19.69inch * 11.81inch * 12.6inch Loading Container 20GP: 555 cartons * 20 pcs = 11100 pcs40HQ: 1289 cartons * 20 pcs = 25780 pcs

Read more less

About the product1. With over-current, over-voltage, short-circuit protection 2. Adopt synchronous voltage stabilizing technology 3. Featured by inflaming retarding, anti-shock, dustproof, dampproof, waterproof function 4. Widely used in the LED car display, GPS navigation, car DVD etc.Specification: General Input Voltage DC 8-40V Output Voltage 5V Output Current 5A Output Power 25W Size 46mm x 32mm x 19mm Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 10.5cm * 2cm / 5.91inch * 4.13inch * 0.79inch Qty per Carton 150 Carton Weight 7.80kgs / 17.20lb Carton Size 50cm * 30cm * 25cm / 19.69inch * 11.81inch * 9.84inch Loading Container 20GP: 711 cartons * 150 pcs = 106650 pcs40HQ: 1650 cartons * 150 pcs = 247500 pcs

Read more less

Installation instructionOutput positive and negative power supply connected to the camera, reversing lights power input connector is negative, reversing ballast is the solution to your reversing camera interference ripple best choiceNoticeSome models of German cars and American cars are, after engine start, output voltage interferences, power supply to the reversing lights are not pure DC power supply, but a pulse signal is superimposed on top oscilloscope can be used to test if the conditions will It found a similar square wave signal. Camera power supply line directly on the down lights, because the working voltage is very unstable cause the camera does not work properly, the video signal output is also not normal, so the host can see there is a severe interference, jitter, or not to switch reversing the screenSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 7.5cm * 6cm * 2cm / 2.95inch * 2.36inch * 0.79inch Qty per Carton 700 Carton Weight 12.10kgs / 26.68lb Carton Size 44cm * 42cm * 40cm / 17.32inch * 16.54inch * 15.75inch Loading Container 20GP: 360 cartons * 700 pcs = 252000 pcs40HQ: 837 cartons * 700 pcs = 585900 pcs

Read more less

Features1. 100% high quality and brand new 2. Light weight and ultra-compact size 3. Efficiency conversion rate: up to 96%, reliable, low heat dissipation max. 40C 4. With overload / over-current / over / low voltage protection, stable performance 5. Epoxy potting, seismic, water, moisture, dust, long term stable and reliable quality; Non-isolated 6. Use imported and integrated switching regulator modules manufacturing, quality is stable and reliable 7. Easy and simple installation. 8. Soft start time: 50ms, output Ripple: 50mV max, 5% 200uS dynamic response speed 9. Suit for Big Bus, Bus, Large trucks, EMU, solar energy generation, Bus LED display, taxi LED display, taxi radio undisturbed, Car audio speaker, LCD television, LED, Talkie, monitor system.Notes1. Please strictly accord the characters to connect line, Red wire is connected to positive pole, yellow wire to positive pole, and black wire to negative pole 2. Please ensure there are enough voltage and power output 3. When it is multi-channel output, please average with load, not merge 4. When it is max current output, please attention the module temperature radiatingSpecification: General Material ABS, Aluminum Input Voltage 15-40V Output Voltage 12V Output Current 3A Output Power 36W Size 5.9*2.5*2.1cm Weight 41g Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 18cm * 10cm * 2cm / 7.09inch * 3.94inch * 0.79inch Qty per Carton 200 Carton Weight 11.50kgs / 25.35lb Carton Size 52cm * 42cm * 38cm / 20.47inch * 16.54inch * 14.96inch Loading Container 20GP: 321 cartons * 200 pcs = 64200 pcs40HQ: 745 cartons * 200 pcs = 149000 pcs

Read more less

1. Convenient to use and transport. 2. Efficiency: > 90%. 3. Temperature at -10C -~80C. 4. Flow automatically with overheating protection.Specification: General Material Plastic Size 4*3.5*2.5cm Weight 27g Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 12cm * 8cm * 3cm / 4.72inch * 3.15inch * 1.18inch Qty per Carton 100 Carton Weight 4.73kgs / 10.43lb Carton Size 32cm * 30cm * 26cm / 12.6inch * 11.81inch * 10.24inch Loading Container 20GP: 1068 cartons * 100 pcs = 106800 pcs40HQ: 2480 cartons * 100 pcs = 248000 pcs

Read more less

1. Voltage:12V 2. This rectifier has overheat protection, help to dissipate excess voltage, prevent over-charging battery, improved heat sink and charging capabilities. 3. Suitable for: Honda CB400 / CB-1 / CBR250 / CBR400 / NSR250.Specification: General Compatible with Honda: CBR400, CB400, NSR250, CB-1 Material Aluminum Voltage 12V Size 22*77*80mm Weight 100g Package Weight One Package Weight 0.14kgs / 0.31lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 120 Carton Weight 18.00kgs / 39.68lb Carton Size 62cm * 52cm * 22cm / 24.41inch * 20.47inch * 8.66inch Loading Container 20GP: 375 cartons * 120 pcs = 45000 pcs40HQ: 872 cartons * 120 pcs = 104640 pcs

Read more less

1. LCD display One-button operation to complete the battery automatically disconnects when fully charged. 2. Multiple intelligent security protection Say goodbye to hidden dangers to protect the security of the system: Overcurrent Protection / Short Circuit Protection / Under Voltage Protection / Reverse Polarity Protection / Temperature Compensation / Over Voltage Protection 3. Suitable for lead-acid batteries, lithium iron phosphate batteries, ternary lithium batteries and other batteries, more convenient. 4. Used in solar power generation systems, smart homes, solar chargers, solar ventilation systems, solar light boxes, solar billboards, solar warning lights, etc. 5. The controller has light control and time control, and can control the discharge through sunlight and time. 6. The three-stage PWM adjustment charging method is adopted for direct charging, boosting charging and floating charging. Using the controller to achieve efficient and fast intelligent charging, and effectively prolong the service life of the battery. 7. It can recognize 12V and 24V Lead acid. 8. Current: 20ASpecification: General Certificate CE, ROHS Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 14cm * 8cm * 5cm / 5.51inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 18.00kgs / 39.68lb Carton Size 44cm * 42cm * 30cm / 17.32inch * 16.54inch * 11.81inch Loading Container 20GP: 481 cartons * 100 pcs = 48100 pcs40HQ: 1116 cartons * 100 pcs = 111600 pcs

Read more less

1. Weight: 360g2. Wire length: 40cm3. Aluminum shell size: 83x94x25.7mm4. Output voltage: 14.5vInstallation precautions:1. The rectifier should be installed in a location with good ventilation and good heat dissipation. High temperature will be generated when the rectifier is working, and poor heat dissipation will damage the rectifier2. The installation steps of the rectifier are to connect the AC input line, the positive and negative output are not connected, start the locomotive, measure the positive and negative output voltage, and when the voltage range is reasonable, plug in the positive and negative wires, and then test the positive and negative of the battery or rectifier If the voltage range is unreasonable, stop using it and give feedback. The whole installation process should be recorded and saved.3. Pay attention that the rectifier should be closely attached to the frame when installing it, which is good for heat conduction. You can also add thermally conductive glue between the rectifier and the frame4. No other wires should be pressed between the rectifier and the frame5. There should be a fuse fuse between the positive outlet of the rectifier and the battery to prevent the overvoltage from burning out other electrical devices when the rectifier is damaged.Applicable models:For Mosfet Yamaha Rai r / YZF R1 2002-2014 Yamaha FJR FJR1300 1300 2003 2005 5JW-81960-00For Yamaha FZ8 Fazer 800 2009 2011 1D7-81960-00For Yamaha FZ8 Fazer 800 2009 2011 1D7-81960-01For Yamaha FZ8 N 800 2009 2011 1D7-81960-01For Yamaha FZ8 N 800 2009 2011 1D7-81960-00For Yamaha FZ8 S 800 2009 2011 1D7-81960-00For Yamaha FZ8 S 800 2009 2011 1D7-81960-01For Yamaha MT 01 1700 2007 5YU-81960-00For Yamaha RS Nytro 900 2006 2007 5JW-81960-00For Yamaha RS Vector 900 2005 2009 5JW-81960-00For Yamaha RS Venture 900 2005 2013 5JW-81960-00For Yamaha RSG Rage 900 2005 2007 5JW-81960-00For Yamaha RX RX1 1000 2003 2005 5JW-81960-00For Yamaha RX Apex 1000 2006 2010 5JW-81960-00For Yamaha RX Warrior 1000 2004 2005 5JW-81960-00For Yamaha RXW Attak 1000 2006 2007 5JW-81960-00For Yamaha VK Professional 1000 2006 2013 5JW-81960-00For Yamaha XTZ Tenere 1200 2010 2012 1D7-81960-00For Yamaha XTZ Tenere 1200 2013 2017 1D7-81960-01For Yamaha XV Road Star Warrior 1700 2003 2009 5JW-81960-00For Yamaha XVS 950 2009 2011 1D7-81960-01For Yamaha XVS V Star 1300 2011 2013 27D-81960-00For Yamaha XVS V Star Tourer 950 2011 2013 27D-81960-00For Yamaha XVS V Star 950 2011 2013 27D-81960-00For Yamaha XVS Stryker 1300 2011 2013 27D-81960-00For Yamaha XVS V Star Tourer 1300 2011 2013 27D-81960-00For Yamaha XVS 950 2009 2011 1D7-81960-00For Yamaha YZF R1 1000 2002 2003 5JW-81960-00Specification: General Compatible with Yamaha: FZ8 Fazer Package Weight One Package Weight 0.42kgs / 0.93lb One Package Size 15cm * 12cm * 8cm / 5.91inch * 4.72inch * 3.15inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs40HQ: 412 cartons * 74 pcs = 30488 pcs

Read more less

1. Weight: 350g2. Wire length: 20cm3. Output voltage: 14.5v4. Use battery: 12v5. Heat dissipation material: aluminum heat dissipation shellApplicable models:For 31620-ZG5-033 (20A) VTK0/K1 8818502 SH711AAFor Honda engines GCV520U WEE1, GCV530 QEA3, GX240K1, GX240U1, GX240UT1, GX240UT2, GX270, GX270U QAR2, GX270UT QAR2For GX340K1, GX340U1, GX340UT1 QNR2, GX340UT2, GX390K1, GX390U1, GX390UT1 QNR2, GX390UT2 QNR2For GX610, GX610K1, GX610R1, GX610U1, GX620, GX620K1, GX620R1, GX620U1, GX640, GX670, GX670R, GX670UFor GXV520U QEA3, GXV530 (JXA3, QEA3, UXE3), GXV530U (QEA3, UXE3), GXV610, GXV610K1 QAF, GXV610R1 QAF, GXV610U1 (QAF, QYF4), GXV1, GXV620, GXV670, GXV620, GX670 .Specification: Package Weight One Package Weight 0.36kgs / 0.79lb One Package Size 15cm * 12cm * 8cm / 5.91inch * 4.72inch * 3.15inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs40HQ: 412 cartons * 74 pcs = 30488 pcs

Read more less

1. Weight: about 250 grams2. Size: about 16.5x13.5x5.8 cm3. Material: ABS plastic4. Voltage: 12V5. Current: 3.6A6. Applicable models: suitable for Mercedes-Benz C-class W205 /W253 /CLS350 2013-20187. Features: use C-BUS smart chip, highly compatible with the original car equipment, can well inhibit the interference to the original car computer, automatic patch packaging, built-in surface mount and through-hole components directly insert and play, replace the original car parts8. OE:A2059053414Specification: General Compatible with Mercedes-Benz: W253, C Class, C W205 Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 18cm * 15cm * 7cm / 7.09inch * 5.91inch * 2.76inch Qty per Carton 114 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 114 pcs = 20178 pcs40HQ: 412 cartons * 114 pcs = 46968 pcs

Read more less

1. Weight: 280G2. Output voltage: 14.5V3. Category: Three-phase full-wave rectifierApplicable models:For V834400126 5SL819600000For Yamaha 600 XJ N 2009-2011For Yamaha R6 5SL SH713AAInstallation Precautions:1. The rectifier should be installed in a location with good ventilation and good heat dissipation. High temperature will be generated when the rectifier is working, and poor heat dissipation will damage the rectifier2. The installation steps of the rectifier are to connect the AC input line, the positive and negative output are not connected, start the locomotive, measure the positive and negative output voltage, and when the voltage range is reasonable, plug in the positive and negative wires, and then test the positive and negative of the battery or rectifier If the voltage range is unreasonable, stop using it and give feedback. The entire installation process should be recorded and saved.Specification: General Compatible with Yamaha: YZF-R6 Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 15cm * 12cm * 8cm / 5.91inch * 4.72inch * 3.15inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs40HQ: 412 cartons * 74 pcs = 30488 pcs

Read more less

1. Weight: 350G 2. Applicable battery: 12V 3. Output voltage: 14.5V 4. Output current: 60A 5. Heat dissipation material: aluminum heat dissipation shell Applicable models: For FH020AA FH010AA For BMW R1200 GS Regulator (FH020AA) 2013 to 2017 For Can-Am Regulator Rectifier 710001103 SH775AA Polaris 4012941 Installation precautions: 1. The rectifier should be installed in a location with good ventilation and good heat dissipation. High temperature will be generated when the rectifier is working, and poor heat dissipation will damage the rectifier 2. The installation steps of the rectifier are to connect the AC input line, the positive and negative output are not connected, start the locomotive, measure the positive and negative output voltage, and when the voltage range is reasonable, plug in the positive and negative wires, and then test the positive and negative of the battery or rectifier If the voltage range is unreasonable, stop using it and give feedback. The entire installation process should be recorded and saved. 3. Note that the rectifier should be closely attached to the frame when installing it, which is conducive to heat conduction. You can also add thermally conductive glue between the rectifier and the frame 4. No other wires should be pressed between the rectifier and the frame 5. There should be a fuse fuse between the positive outlet of the rectifier and the battery to prevent the rectifier from being damaged when the voltage is too large and other electrical devices Specification: Package Weight One Package Weight 0.37kgs / 0.81lb One Package Size 15cm * 12cm * 8cm / 5.91inch * 4.72inch * 3.15inch Qty per Carton 60 Carton Weight 20.94kgs / 46.16lb Carton Size 58cm * 46cm * 31cm / 22.83inch * 18.11inch * 12.2inch Loading Container 20GP: 322 cartons * 60 pcs = 19320 pcs40HQ: 748 cartons * 60 pcs = 44880 pcs

Read more less

1. Weight: 444G2. Output voltage: 14.5V3. Output current: 35A4. Category: Three-phase full-wave rectifierApplicable models:For Honda MUV 2A 700 2009 2013 31600-HP5-601For Honda TRX FE/FM/TE/TM 420 2007 2013 31600-HP5-601For Honda TRX FA 420 2009 2014 31600-HP5-601For Honda TRX FPA/FPE/FPM 420 2009 2013 31600-HP5-601For Reemplazo Shin ngen SH753AAInstallation Precautions:1. The rectifier should be installed in a location with good ventilation and good heat dissipation. High temperature will be generated when the rectifier is working, and poor heat dissipation will damage the rectifier2. The installation steps of the rectifier are to connect the AC input line, the positive and negative output are not connected, start the locomotive, measure the positive and negative output voltage, and when the voltage range is reasonable, plug in the positive and negative wires, and then test the positive and negative of the battery or rectifier If the voltage range is unreasonable, stop using it and give feedback. The entire installation process should be recorded and saved.3. Note that the rectifier should be closely attached to the frame when installing it, which is good for heat conduction. You can also add thermally conductive glue between the rectifier and the frame4. No other wires should be pressed between the rectifier and the frame5. There should be a fuse fuse between the positive outlet of the rectifier and the battery to prevent the rectifier from being damaged when the voltage is too large and other electrical devicesSpecification: Package Weight One Package Weight 0.35kgs / 0.77lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 41cm * 20cm / 19.69inch * 16.14inch * 7.87inch Loading Container 20GP: 650 cartons * 74 pcs = 48100 pcs40HQ: 1509 cartons * 74 pcs = 111666 pcs

Read more less

1. Weight: 360g2. Output voltage: 14.5v3. Category: Three-phase full-wave rectifier4. Applicable models: applicable to FH012AA 210660714 21066-0022 99999-0377 21066-0008 21066-0714 21066-0744Installation Precautions:1. The rectifier should be installed in a location with good ventilation and good heat dissipation. High temperature will be generated when the rectifier is working, and poor heat dissipation will damage the rectifier2. The installation steps of the rectifier are to connect the AC input line, the positive and negative output are not connected, start the locomotive, measure the positive and negative output voltage, and when the voltage range is reasonable, plug in the positive and negative wires, and then test the positive and negative of the battery or rectifier If the voltage range is unreasonable, stop using it and give feedback. The entire installation process should be recorded and saved.3. Note that the rectifier should be closely attached to the frame when installing it, which is good for heat conduction. You can also add thermally conductive glue between the rectifier and the frame4. No other wires should be pressed between the rectifier and the frame5. There should be a fuse protection device between the positive outlet of the rectifier and the battery to prevent the rectifier from being damaged and the voltage is too high and other electrical components are burned outSpecification: General Compatible with Yamaha: Grizzly 700 Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 15cm * 12cm * 8cm / 5.91inch * 4.72inch * 3.15inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs40HQ: 412 cartons * 74 pcs = 30488 pcs

Read more less

1) With this DC transformer, you can transform a high input voltage into a low output voltage with output current of 45A 2) Input DC voltage: 24V 3) Output DC voltage: 12V 4) Rated output current: 45A 5) Easy and safe to use, with overheating and over current protection 6) Material: Aluminum alloy casing 7) Size: 140 x 110 x 45mm 8) Weight: 400gSpecification: Package Weight One Package Weight 0.38kgs / 0.84lb One Package Size 14.4cm * 11.5cm * 4.6cm / 5.67inch * 4.53inch * 1.81inch Qty per Carton 40 Carton Weight 18.60kgs / 41.01lb Carton Size 30cm * 25cm * 47cm / 11.81inch * 9.84inch * 18.5inch Loading Container 20GP: 756 cartons * 40 pcs = 30240 pcs40HQ: 1756 cartons * 40 pcs = 70240 pcs

Read more less

1. Weight: about 250 grams2. Size: about 16.5x13.5x5.8 cm3. Material: ABS plastic4. Voltage: 12V5. Current: 3.6A6. Applicable models: suitable for Mercedes-Benz W205 C-class 2014-2018, C220D, C250D, C180, C200, C250, C300, C400, C43AMG, C63AMG, W257, CLS-class, CLS220D, CLS300D, CLS350D, CLS400D, CLS200, CLS300, CLS350, CLS450, CLS50AMG, W253 GLC-class 2015-2018, GLC220D, GLC250D, GLC350D, GLC200, GLC250, GLC300, GLC43AMG, GLC63AMG, W213 E-class 2017-2018, E220D, E300D, E400D, E350D, E200, E220, E250, E400, E450, E450, E63AMG, W222 s-class 2013-2018, S450, S500, S63AMG, S63AMG7. Features: use C-BUS smart chip, highly compatible with the original car equipment, can well inhibit the interference to the original car computer, automatic patch packaging, built-in surface mount and through-hole components directly insert and play, replace the original car parts8. OE:A2054400073Specification: General Compatible with Mercedes-Benz: W222, W253, C Class, C W205 Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 18cm * 15cm * 7cm / 7.09inch * 5.91inch * 2.76inch Qty per Carton 114 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 114 pcs = 20178 pcs40HQ: 412 cartons * 114 pcs = 46968 pcs

Read more less

1. Weight: about 250 grams2. Size: about 15.5x11.5x5 cm3. Input voltage range: 9-16V4. Rated input voltage: 12V5. Working current: 3.6A6. Applicable models: suitable for Cayenne 957 2008-2010, chassis number 955.631.194.017. Features: use C-BUS smart chip, highly compatible with the original car equipment, can well inhibit the interference to the original car computer, automatic patch packaging, built-in high-quality surface mount and through-hole components directly insert and play, replacement of original car parts, no programming required8. OE:5DC009285-00Specification: General Compatible with Porsche: Cayenne Package Weight One Package Weight 0.24kgs / 0.53lb One Package Size 17cm * 13cm * 7cm / 6.69inch * 5.12inch * 2.76inch Qty per Carton 114 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 114 pcs = 20178 pcs40HQ: 412 cartons * 114 pcs = 46968 pcs

Read more less