Search results for "control module"
-
WAVESHARE WAVESHARE MINI Laser Range Sensor, Based On Time-of-Flight Technology, Built-in Controller And Ranging Algorithm, UART Communication Support, 35107
1. Typical ranging range: 0.02m - 4m2. Error: +/- (1% - 3%)3. Field of View (FOV): 25 - 30 degrees4. Refresh rate: 30Hz5. Ambient light immunity: 20K Lux6. Operating temperature: -20 to 70 degrees Celsius7. Operating humidity: 35% - 80% RH8. Laser safety class: LASER CLASS 1 (IEC 60825-1: 2014)9. Wavelength: 940nm10. Communication interface: UART11. Baud rate: 11520012. Data bits: 813. Stop bit: 114. Parity: None15. Supply voltage: 4V - 5.6V16. Power consumption: 100mW - 140mW17. Average/Peak current: 25mA/26mA18. Housing material: PC19. Storage temperature: -40 to 80 degrees Celsius20. Weight: Approx. 3g21. Dimensions: Approx. 17.37 x 13 x 6.88mmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 7cm * 6cm * 2cm / 2.76inch * 2.36inch * 0.79inch Qty per Carton 200 Carton Weight 6.80kgs / 14.99lb Carton Size 36cm * 30cm * 30cm / 14.17inch * 11.81inch * 11.81inch Loading Container 20GP: 823 cartons * 200 pcs = 164600 pcs40HQ: 1910 cartons * 200 pcs = 382000 pcs
£5.99
-
Waveshare Waveshare Core405R, STM32F4 Core Board
Overview1. Core405R is an STM32 MCU core board designed for STM32F405RGT6, supports further expansion. It is ideal for starting application development with STM32F family.2. Minimal ready-to-run system, integrates clock circuit, USB control circuit, USB connector, 3. etc.3. All the I/O ports are accessible on the pin headers4. JTAG/SWD programming/debugging interface5. 2.54mm header pitch, allowed to be plugged-in your application boardWhat has On Board1. STM32F405RGT6: The high performance STM32 MCU which features:- Core: Cortex-M4 32-bit RISC- Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz- Operating Voltage: 1.8V-3.6V- Package: LQFP64- Memories: 1MB Flash, 192+4kB SRAM- MCU communication Interfaces:-- 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C, 1 x SDIO, 2 x CAN--1 x USB 2.0 HS/FS device/host/OTG controller with dedicated DMA, on-chip full-speed PHY--1 x USB HS ULPI (external PHY required)- AD & DA converters: 3 x AD (12-bit, 1μs, shares 16 channels); 2 x DA (12-bit)- Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP2. AMS1117-3.3: 3.3V voltage regulator3. MIC2075-2: onboard USB power management device4. Power supply switch, powered from 5Vin or USB connection5. Boot mode selection, for configuring BOOT0 pin6. Power indicator7. VBUS LED8. Reset button9. 8M crystal10. 32.768K crystal, for internal RTC with calibration11. JTAG/SWD interface: for debugging/programming12. USB connector, used for establishing USB communication between PC and the STM32 development board13. MCU pins expander, VCC, GND and all the I/O pins are accessible on expansion connectors for further expansion14. 5Vin pinheader, 5V power supply is required when using USB HOST/OTG15. USB jumper- Short the jumper when using USB- Open the jumper to disconnect from related I/O port16. VBAT selection jumper- Short the jumper to use system power supply- Open the jumper to connect the VBAT to external power, such as batteryPackage Contents1. Core405R x 12. USB type A to Mini-B cable x 13. Software CD x 1Specification: Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 390 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 39cm / 23.62inch * 15.75inch * 15.35inch Loading Container 20GP: 284 cartons * 390 pcs = 110760 pcs40HQ: 661 cartons * 390 pcs = 257790 pcs
£21.99
-
WAVESHARE Waveshare Mini IO Board Full Ver Mini-Computer Base Box with Metal Case & Cooling Fan for Raspberry Pi CM4, Mini IO Board Full Ver
Specification1. USB: - USB 2.0 x 2 - USB 2.0 x 2 (via FFC connector) 2. GPIO: Raspberry Pi 40 PIN GPIO x 1 3. Header: M.2 slot x 1 4. HD media interface: HDMI x 2, 1x via FFC connector, support 4K 30fps output 5. DSI display: MIPI DSI x 1 (15pin 1.0mm FPC) 6. CSI camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC) 7. Power input: 5V 8. FAN: 5V / 12V (no fan control) 9. RJ45 Ethernet: Gigabit Ethernet 10. CM4 slot: Suitable for all variants of Compute Module 4 11. SD card slot: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 12. Size: 85.0 x 56.0mmPackage List1. CM4-IO-BASE-B x 1 2. Metal case (top and bottom) x 1 3. Fan-4010-PWM-5V x 1 4. Screwdriver x 1 5. Screws pack x 1 6. 5V 3A USB-C power adapter x 1Specification: Package Weight One Package Weight 0.41kgs / 0.89lb One Package Size 16cm * 12cm * 5cm / 6.3inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 16.50kgs / 36.38lb Carton Size 50cm * 32cm * 27cm / 19.69inch * 12.6inch * 10.63inch Loading Container 20GP: 617 cartons * 40 pcs = 24680 pcs40HQ: 1432 cartons * 40 pcs = 57280 pcs
£34.99
-
Waveshare Waveshare Gigabit/2.5G Dual Ethernet Industrial Computer Based On Raspberry Pi CM5, 4 x RS485, 2×RS485+2×RS232
1. CM5 socket: Compatible with all versions of Compute Module 5 2. Networking: 1000M Ethernet RJ45 interface, 2500M Ethernet RJ45 interface 3. USB: USB 3.2 Gen1 x 1; USB 2.0 interfaces x 3 4. Video: HDMI interface x 1, supports 4K output 5. M.2: M.2 M KEY (PCIe Gen2/3 x 1, 2230 / 2242); M.2 B KEY, supports connection to 4G / 5G communication modules 6. Storage: On-board Micro SD card slot (for CM5 versions without eMMC) 7. Serial interfaces: 2 x RS485 + 2 x RS232 or 4 x RS485 versions optional; 1 x CAN supports 1Mbps communication rate 8. Digital input/output: 2 x digital outputs + 2 x digital inputs 9. Audio: 3.5mm headphone jack (supports microphone), PH2.0 speaker interface 10. Fan interface: 5V, 4PIN JST-SH PWM fan connector 11. Buzzer: Single-channel controllable buzzer 12. Other: On-board EEPROM and encryption chip 13. Power input: 7V to 36V wide voltage (terminal block), 5V 5A (Type-C) 14. Dimensions: 136.00 x 92.00 x 39.50 mmSpecification: Package Weight One Package Weight 0.78kgs / 1.73lb One Package Size 18cm * 14cm * 6cm / 7.09inch * 5.51inch * 2.36inch Qty per Carton 30 Carton Weight 24.50kgs / 54.01lb Carton Size 38cm * 44cm * 32cm / 14.96inch * 17.32inch * 12.6inch Loading Container 20GP: 498 cartons * 30 pcs = 14940 pcs40HQ: 1157 cartons * 30 pcs = 34710 pcs
£101.99
-
Waveshare AlphaBot2 Robot Building Kit For Raspberry Pi 3 Model B (No Pi), For Raspberry Pi 3 Model B (No Pi)
OverviewThis AlphaBot2 robot kit is designed to use with Raspberry Pi 3 Model B (not included). It features rich common robot functions including line tracking, obstacle avoiding, Bluetooth/infrared/WiFi remote control, video monitoring, etc.Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, youre almost there, our open source demo codes is ready to help you get started fast.AlphaBot2 FeaturesAlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.AlphaBot2-Base, the lower base chassis:1. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking2. Onboard modules like line tracking, obstacle avoiding, needs no messy wiring3. TB6612FNG dual H-bridge motor driver, compared with L298P, its more efficient, more compact, and less heating4. 5Onboard RGB LEDs, true color lighting, pretty coolAlphaBot2-Pi, the upper adapter board for controller:1. LM2596 voltage regulator, provides the Pi with stable 5V power2. TLC1543 AD acquisition chip, allows the Pi to use analog sensors3. PCA9685 servo controller, make it more smoothly to rotate the pan head4. CP2102 UART converter, easy for controlling the Pi via UARTSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 18cm * 6cm * 15cm / 7.09inch * 2.36inch * 5.91inch Qty per Carton 36 Carton Weight 1.80kgs / 3.97lb Carton Size 54cm * 36cm * 30cm / 21.26inch * 14.17inch * 11.81inch Loading Container 20GP: 457 cartons * 36 pcs = 16452 pcs40HQ: 1061 cartons * 36 pcs = 38196 pcs
£85.99
-
TTGO TTGO T-PCIE ESP32-WROVER-B AXP192 Chip WiFi Bluetooth Nano Card SIM Series Module 16MB Hardware Composable Development Board, 16MB
Hardware specifications 1. Chipset: ESP32-WROVER-B, AXP192 power management chip 2. Flash: 16MB 3. Static SRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: PWR power switch, reset 6. USB to TTL: CP2104 7. Vehicle clock: 40MHz crystal oscillator 8. Peripheral equipment: SIM Nano card slot, Mini PCIE card slot 9. Antenna: Onboard antenna (default) 10. Working voltage: 2.7V to 3.6V 11. Sleep current: About 700ma 12. Operating temperature range: -40 degrees Celsius ~ + 85 degrees Celsius 13. Dimensions: 75 x 33 x 10.5 mm 14. Weight: 14.5g Power Specifications 1. Power input: USB 5V / 1A 2. Charging current: 500 mA 3. Battery input: 3.7-4.2V 4. Charging IC: AXP192 5. JST connector: 2-pin 2.0mm 6. USB: Type C wireless online 1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (ESP32 chip) 2. Protocol: 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU aggregation, support 0.4uS guard interval 3. Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) 4. Transmit power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Compliant with Bluetooth v4.2BR/EDR and BLE standards 2. Radio frequency: NZIF receiver Class-1 with sensitivity of -97dBm, Class-2&Class-3 transmitter AFH 3. Audio: CVSD&SBC audio Software specifications 1. Wi-Fi mode: Workstation / SoftAP / SoftAP + Station / P2P 2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS 3. Encryption method: AES / RSA / ECC / SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development / SDK for user firmware development 6. Network protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User configuration: AT + command set, cloud server, Android / iOS app 8. Operating system: FreeRTOS Packing list 1. T-PCIE 16MB x 1 2. Charging cable x 1 3. Needle Pin x 2Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 13.00kgs / 28.66lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 300 pcs = 169800 pcs40HQ: 1314 cartons * 300 pcs = 394200 pcs
£14.99
-
Waveshare Waveshare BMP388 High Precision Barometric Pressure Sensor, Accurate Altitude Tracing, BMP388
BMP388 High Precision Barometric Pressure Sensor, Altitude / Barometric Pressure / Temperature Measuring, I2C/SPI InterfaceOverview1. This is a 24-bit high precision barometric pressure sensor, which allows accurate altitude tracing, as well as barometric pressure / temperature measuring. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels.2. Due to its ultra small form factor, low power consumption, low noise and high precision, the BMP388 Barometric Pressure Sensor is suited for applications such as drones, accurate altimeter, environment monitoring, and IoT projects, and so on.Features1. Supports I2C (default) / SPI interface2. Onboard voltage level translator, compatible with 3.3V/5V operating voltage3. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Operating voltage: 3.3V/5V2. Communication interface: I2C/SPI3. Barometric pressure operation range: 300~1250hPa4. Barometric pressure absolute accuracy: +/-0.40hPa (@900~1100hPa, 25~40 degree C)5. Barometric pressure relative accuracy: +/-0.08hPa (@900~1100hPa, 25~40 degree C)6. Temperature coefficient offset: ±0.75Pa/K (@700~1100hPa, -20~65 degree C)7. Temperature absolute accuracy: +/-0.5 degree C (0~65 degree C)8. Possible resolution: 0.016Pa (high precision mode)9. Possible sampling rate: 200Hz10. Operating voltage: -40~85 degree C11. Dimension: 32mm × 20mm12. Mounting hole size: 2.0mmPinouts1. VCC: 3.3V/5V power supply2. GND: Ground3. SDA: I2C data4. SCL: I2C clock5. INT: Interrupt output, can be connected to I/OPackage Contents1. BMP388 Barometric Pressure Sensor x12. PH2.0 5PIN wire x1Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs40HQ: 661 cartons * 6240 pcs = 4124640 pcs
£12.99
-
Microwave Radar Human Body Sensor 12/24V DC Body Car Mobile Sensing, 807DC, 807K-DC
1. Voltage: DC12-24V2. Frequency: 50/60HZ3. Installation method: indoor, ceiling installation4. HF system: 5.8GHz CW radio wave, ISM band5. Transmitting power: less than 10mW6. Power: 70W (DC 12V)7. Detection angle: 360 degrees8. Distance: about 1-10m (radius) adjustable9. Working delay: 10 seconds to 3 minutes10. Light control illumination: about 2-2000 LUX11. Power consumption: about 0.5W12. Description: 807 with power output, 807K without power output13. Applicable environment: corridors, toilets, living rooms, corridors, warehouses, garages, etc.14. Installation reminder: the induction switch has a transmission blind spot in the central area. If it is installed in a small indoor environment (such as bathroom, kitchen), try to install it on the side or in the corner, so that the induction area will be more effective on the side. otherwise, the vertical center activity may not be sensed15. Size: about 7.6x4.1x3.9cmSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 10cm * 6cm * 5cm / 3.94inch * 2.36inch * 1.97inch Qty per Carton 356 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 356 pcs = 63012 pcs40HQ: 412 cartons * 356 pcs = 146672 pcs
£5.99
-
GL09 PLUS Low Standby Power Consumption 8-channel Monitoring GSM Alarm Module, GL09 PLUS
1. Low-power sleep mode design 2. One way alarm voltage output 3. It can detect the voltage of the battery in real time and make a low battery voltage alarm, suitable for battery-powered applications, and a wide voltage supply range from DC5V to DC16V 4. Eight-way alarm detection, users can set different content for each alarm SMS, The input port can be selected as NC or NO alarm mode 5. 6 groups of called numbers can be set. When the alarm input has a trigger signal, an alarm message will be sent to the alarm number, or an alarm will be called directly 6. Easy to use, supports iOS and Android apps, you can simply send text messages through the app to set up 7. Wide application fields: mainly home security, warehouses, remote unattended stations, remote monitoring of equipment parameters (such as oil pressure, air pressure, water pressure, voltage, etc.), product upgrades (voltage monitoring, overload monitoring, etc.), safety protection (Smoke, fire, water level monitoring, gas, etc.) Other unattended points 8. Size: 8 x 5.8 x 2.2cmSpecification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 21.00kgs / 46.30lb Carton Size 52cm * 42cm * 22cm / 20.47inch * 16.54inch * 8.66inch Loading Container 20GP: 555 cartons * 100 pcs = 55500 pcs40HQ: 1288 cartons * 100 pcs = 128800 pcs
£45.99
-
GameSir GameSir GameSir Kaleid Wired Game Controller for XBOX
1. Transparent Design: Unique transparent shell reveals internal structure, adding a high-tech feel.2. RGB Lighting Effects: Equipped with customizable RGB lighting for an immersive gaming experience.3. Hall Effect Technology: Features advanced Hall effect joysticks and triggers for superior precision and durability.4. Designed for Xbox: Fully compatible with Xbox consoles, offering the best gaming experience.5. Ergonomic Design: The ergonomically designed grip enhances comfort during long gaming sessions.6. Multi-functional Button Layout: Optimized button arrangement and response speed ensure smoother operation.Specification: General Compatible with MicroSoft: xbox Package Weight One Package Weight 0.86kgs / 1.90lb One Package Size 23cm * 17cm * 11cm / 9.06inch * 6.69inch * 4.33inch Qty per Carton 20 Carton Weight 18.20kgs / 40.12lb Carton Size 57cm * 36cm * 48cm / 22.44inch * 14.17inch * 18.9inch Loading Container 20GP: 270 cartons * 20 pcs = 5400 pcs40HQ: 628 cartons * 20 pcs = 12560 pcs
£35.99
-
Waveshare Waveshare 4G / 3G / 2G / GSM / GPRS / GNSS HAT for Raspberry Pi, LTE CAT4, for China
Overview1. The SIM7600A-H 4G HAT is a 4G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption. 2. You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.Applicable Region1. SIM7600A-H is mainly applicable in North America (US, CA, MX), SIM7600E-H is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE-T is mainly applicable in China. 2. Please check the supported bands according to your local service provider, select the proper one when placing order.Features1. Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ 2. Support dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc. 3. Support GPS, BeiDou, Glonass, LBS base station positioning 4. Onboard USB interface, to test AT Commands, get GPS positioning data, and so on 5. Onboard CP2102 USB to UART converter, for serial debugging 6. Breakout UART control pins, to connect with host boards like Arduino/STM32 7. SIM card slot, supports 1.8V/3V SIM card 8. Onboard audio jack and audio decoder for making telephone call 9. 2x LED indicators, easy to monitor the working status 10. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper 11. Baudrate: 300bps-4Mbps (default: 115200bps) 12. Autobauding baudrate: 9600bps-115200bps 13. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set) 14. Support SIM application toolkit: SAT Class 3, USAT 15. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Communications Specifications1. Band: A. LTE: - SIM7600A-H: LTE-FDD B2/B4/B12 - SIM7600E-H: LTE-FDD B1/B3/B5/B7/B8/B20, LTE-TDD B38/B40/B41 - SIM7600CE-T: LTE-TDD B38/B39/B40/B41, LTE-FDD B1/B3/B8 B. WCDMA / TD-SCDMA/ CDMA 2000 - SIM7600A-H: UMTS/HSPA+ B2/B5 - SIM7600E-H: UMTS/HSPA+ B1/B5/B8 - SIM7600CE-T: UMTS/HSDPA/HSPA+ B1/B8, TD-SCDMA B34/B39, CDMA 1X/EVDO BC0 C. GSM/GPRS/EDGE 900/1800 MHz 2. Generation: 4G, 3G, 2.5G, 2G 3. Emitting power: 0.25W, 0.5W/EGSM900, 0.4W/DCS1800, 2W/GSM900, 1W/DCS1800 4. Data Speed - LTE CAT 4: Uplink=<50 Mbps, Downlink=<150 Mbps - UMTS: Uplink=<384Kbps, Downlink=<384Kbps - EDGE: Uplink=<236.8kbps, Downlink=<236.8kbps - GPRS: Uplink=<85.6kbps, Downlink=<85.6kbps - HSPA+: Uplink=<5.76Mbps, Downlink=<42MbpsGNSS Specifications1. Receiver type - 16-channel - C/A code 2. Sensitivity - Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD) - Cold starts: -148 dBm 3. Time-To-First-Fix (open air) - Cold starts: <35s - Hot starts: <1s 4. Accuracy - Position: <2.5m CEPSMS and Audio Specifications1. SMS - Support types: MT, MO, CB, Text, PDU - Storage: USIM card and ME (default) 2. Audio feature - Support echo cancellation - Support noise reductionOther Specifications1. Power supply: 5V 2. Operating voltage: 5V/3.3V (configured via jumper) 3. Operating temperature: -30 degree C ~ 80 degree C 4. Storage temperature: -45 degree C - 90 degree C 5. Dimension: 56.21mm x 65.15mmWhat is on Board1. SIM7600CE-T 2. CP2102 USB to UART converter 3. NAU8810 audio decoder 4. TXS0108EPWR voltage translator: Translates 3.3V/5V into 1.8V 5. MP2128DT power chip 6. MP1482 power chip 7. Raspberry Pi GPIO header: For connecting with Raspberry Pi 8. SIM7600 control interface: For connecting with host boards like Arduino/STM32 9. SIM card slot: Supports 1.8V/3V SIM card 10. TF card slot: Allows file/SMS/...storage 11. 3.5mm earphone/mic jack 12. USB interface: For testing AT Commands, getting GPS positioning data, etc. 13. USB to UART interface: For serial debugging, or login to Raspberry Pi 14. MAIN antenna connector 15. AUX antenna connector 16. GNSS antenna connector 17. Power switch 18. Network status indicator 19. Power indicator 20. Operating voltage selection jumper: - VCCIO-3.3V: set operating voltage as 3.3V - VCCIO-5V: set operating voltage as 5V 21. UART selection jumper: - A: Access Raspberry Pi via USB to UART - B: Control the SIM7600 by Raspberry Pi - C: Control the SIM7600 via USB to UARTPackage List1. SIM7600CE 4G HAT x1 2. LTE Antenna x1 3. GPS External Antenna (B) x1 4. USB type A plug to micro plug cable x2 5. RPi screws pack (2pcs) x1Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 15cm * 8cm * 3cm / 5.91inch * 3.15inch * 1.18inch Qty per Carton 260 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 39cm / 23.62inch * 15.75inch * 15.35inch Loading Container 20GP: 284 cartons * 260 pcs = 73840 pcs40HQ: 661 cartons * 260 pcs = 171860 pcs
£73.99
-
JJR/C JJR/C S27 Remote Control Aircraft Carrier Toy with Water Cannon
1. Material: Hardware + Electronics + Plastic2. Remote Control Frequency: 2.4G3. Usage Time: Approximately 30 minutes4. Charging Time: Approximately 2-2.5 hours5. Battery Specifications: 7.6V/600mAh6. Charging Type: USB7. Remote Control Battery: 2xAA (Not included in this product)8. Remote Control Distance: Approximately 60 meters9. The boat features a power-on function when submerged and a power-off function when out of water, with two speed settings.10. When the indicator light on the boat or remote control flashes after approximately 30 minutes of use, it indicates that the boats battery is low and needs charging.Specification: Package Weight One Package Weight 0.96kgs / 2.13lb One Package Size 42cm * 14cm * 12cm / 16.54inch * 5.51inch * 4.72inch Qty per Carton 12 Carton Weight 12.52kgs / 27.60lb Carton Size 58cm * 44cm * 38cm / 22.83inch * 17.32inch * 14.96inch Loading Container 20GP: 274 cartons * 12 pcs = 3288 pcs40HQ: 638 cartons * 12 pcs = 7656 pcs
£21.99