Search results for "pet electronics"

Description1. The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.2. STM8 applications use the USB full speed interface to communicate with STMicroelectronics ST Visual Develop (STVD) or ST Visual Program (STVP) software.3. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.Key Features1. 5V power supplied by a USB connector2. USB 2.0 full speed compatible interface3. USB standard A to mini B cable4. SWIM specific features5. 1.65 V to 5.5 V application voltage supported on SWIM interface6. SWIM low-speed and high-speed modes supported7. SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed8. SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector9. SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector10. JTAG specific features11. 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs12. JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector13. Direct firmware update feature supported (DFU)14. Status LED which blinks during communication with the PC15. Operating temperature 0 to 50 °CApplication ExampleConnecting the PC and STM8/STM32 application board through ST-LINK/V2 to establish hardware connectionConnection with STM8 applicationsThe ST-LINK/V2 should be connected to the STM8 application via the SWIM cable. Two SWIM cables are delivered with the product:- SWIM flat ribbon with a standard ERNI connector at one end and a 4-pin connector at the other end- SWIM flat ribbon ended with a 4-pin, 2.54 mm, low-cost connector on two sidesConnection with STM32 applicationsFor STM32 developments the ST-LINK/V2 must be connected to the application using the standard 20-pin female-female JTAG flat ribbon provided.ST-LINK/V2 StatusThe LED labeled COM on top of the ST-LINK/V2 shows the ST-LINK/V2 status (whatever the connection type). When the:1. LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.2. LED is RED: communication between ST-LINK/V2 and the PC is established (end of enumeration).3. LED is blinking GREEN/RED: data are being exchanged between the target and the PC.4. LED is GREEN: the last communication has been successful.5. LED is ORANGE: ST-LINK/V2 communication with the target has failed.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 9.60kgs / 21.16lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs40HQ: 895 cartons * 96 pcs = 85920 pcs

Read more less

1. Power off save, low voltage alarm, timing display, reverse connection protection2. Real-time monitoring, smart chip, precision fine-tuning3. Applicable to various instruments, mobile convenient equipment, medical equipment, electric vehicles, balance vehicles, unicycles, ternary lithium batteries, lead-acid batteries, iron-lithium battery packs, etc.4. Stable and reliable, fast recognition, sensitive response5. Reverse connection does not burn, safe and reliable6. The LCD display works, you can set the type of battery you need to measure7. Waterproof grade: IPX78. Working current: less than or equal to 15mA9. Working air pressure: 80-106 kPa10. Ambient temperature: -10 to 70 degrees Celsius11. Measuring range: 8-72v / 8-100v12. Measurement speed: about 2 seconds/time13. Display mode: LCD screen14. Installation size: 58 x 28mm15. Dimensions: 61.3x33.3x16.2mm16. Weight: about 27gSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 5cm * 3cm / 3.94inch * 1.97inch * 1.18inch Qty per Carton 500 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs40HQ: 562 cartons * 500 pcs = 281000 pcs

Read more less

1. Material: steel + rubber pad2. Process: electrostatic spraying3. Good installation fit4. Equipped with anti-skid pads on top and bottom5. Screw fixing6. With keyboard instrument fixing strap7. High fit with the piano body, stable and firm8. Scope of application: electric piano, electronic organ, guzheng, sand easel, etc.9. Unit weight: 2kg10. Seven levels of height adjustment, adjustment range: 32-96cmSpecification: Package Weight One Package Weight 2.10kgs / 4.64lb One Package Size 96cm * 10cm * 10cm / 37.8inch * 3.94inch * 3.94inch Qty per Carton 14 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 14 pcs = 2478 pcs40HQ: 412 cartons * 14 pcs = 5768 pcs

Read more less

About The Product1. LINEPAUDIO A962 fancier-level HiFi Vacuum Tube Power Headphone Amplifier PreAmp, made of Beijing classic quality 6J9-J vacuum tube, USB-PC supported ASIO sound effect software will give out more professional, full, open-stage, soft and smooth sound, especially applicable to voice, string music, light music, and classical music, the performance of different frequency points is so perfect! Fine at high frequency, strong at low frequency! Easily drive 16??-600 ?? headphone of any class, quiet background without any current background noise! Two sets of audio signal inputs, one is USB signal input (USB-PC), USB cable is connected to PC, plug and play without a drive, directly used as an upscale USB external sound card. The USB port can be also connected to any model of Android mobile phones with OTG function. The other is 3.5mm interface audio signal input and you can connect it to mobile phone, CD, lossless music player or other audio source devices. In case of simultaneous inputs of USB signal and 3.5mm interface signal, 3.5mm interface signal input is preferred. 2. LINEPAUDIO A962 has three sets of audio signals, simultaneously output to meet the interface of different devices (RCA/3.5mm/6.35mm), the output end will deliver to you a real HiFi experience, whether connected to your upscale headphone or speaker, or used as a timbre adjustable PreAmp to connect your digital power amplifier, multimedia speaker or various stereo devices, what a real PreAmp. Of course, if you want to try the timbre style of different tube amplifiers, this product can fully meet your requirement, compatible with E180F, 6688 and other tube models, you may exchange at will. 3. Many music fanciers are concerned about the background noise of vacuum tube headphone amplifier, but this product frees you from this concern, its performance in controlling background noise is extraordinary, the background is quiet after several tests and optimizations of the circuit design, without any current background noise, you will hear the purest, most natural, and most nostalgic sound. As to the testing of the current background noise: as it is known to all, the current background noise comes from two sources, one is the vacuum tube headphone amplifier, the other is the audio source or the audio cable (the audio cable makes it more likely to generate background noise), the correct procedure of testing the headphone amplifier is to disconnect the audio input cable, with power on, if the background of the headphone amplifier is quiet, it indicates that the headphone amplifier has a very high SNR. If unquiet, or this seriously affects you from listening music, it indicates that the headphone amplifier has a very low SNR. 4. Notes: An electronic interference device near the desktop may also affect the SNR. For example, if the vacuum tube power amplifier is placed near a wireless router or device, it may be interfered to some extent. Enclosed by an aluminum shell, miniaturized but exquisite, the front, rear panel is precisely processed by CNC machining center, you will get a terrific handle, the ultra-small volume will not occupy your desktop space too much. More than a multi-functional upscale high-fidelity USB sound card vacuum tube headphone amplifier, it is also a beautiful desktop ornament. All letters on the machine panels are printed using expensive laser carving and will never fade off.Features1. 2 sets of signal inputs (USB-PC and 3.5mm input), 3.5mm input is preferred. 2. 3 sets of stereo signal outputs: 3.5mm / 6.35mm / RCA simultaneous signal outputs, allowing you to connect different device interfaces. 3. USB: PC Supported ASIO sound effect software (ASIO drive to be installed) 4. Input power: >=1100mW (32ohms). 5. Matched headphone impedance: 16ohms-600ohms. 6. Frequency response: 20 kHz - 30kHz. 7. Support sampling rate: 16Bit - 32k Bit, 44.1kHz, 48kHz.Specification: General Model A962 Material Metal Input Impedance 16ohms-600ohms headphone SNR > = 110dB Distortion < 0.005% Frequency Response 20 kHz - 30kHz Size 98*94*29mm Weight 398g Package Include Package Contents 1 x Amplifier 1 x AC Power Adapter Charger 1 x USB Cable Package Weight One Package Weight 0.54kgs / 1.20lb One Package Size 20cm * 18cm * 5.5cm / 7.87inch * 7.09inch * 2.17inch Qty per Carton 20 Carton Weight 10.96kgs / 24.16lb Carton Size 42cm * 38cm * 30cm / 16.54inch * 14.96inch * 11.81inch Loading Container 20GP: 556 cartons * 20 pcs = 11120 pcs40HQ: 1292 cartons * 20 pcs = 25840 pcs

Read more less

1. Material: ABS 2. Rated current: 20A 3. Key life: 100000 times 4. Input voltage: AC 100-240V 5. Input frequency: 50/60Hz 6. Rated power: 4000W 7. Support system: Alexa/Google Home 8. Working temperature: -20 to 50 degrees Celsius 9. Control method: APP control / voice control 10. Wireless protocol: ZigBee 2.4GHz IEEE 802.15.4 11. Size: 86x86x35mm 12. Weight: 218g Features: 1. Timing function, set the water heater timing switch power supply 2. Support Google Home, Alexa, Tuya APP, Smart Life APP 3. Remote control, you can also control the water heater through the app while working 4. Share the device with family members, they can control the device directly on the phone 5. ABS fireproof material, glass panel moistureproof 6. ZigBee needs to be used with a gateway, and the WiFi version does not need a gatewaySpecification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 11cm * 10cm * 6cm / 4.33inch * 3.94inch * 2.36inch Qty per Carton 118 Carton Weight 30.00kgs / 66.14lb Carton Size 53cm * 49cm * 29cm / 20.87inch * 19.29inch * 11.42inch Loading Container 20GP: 354 cartons * 118 pcs = 41772 pcs40HQ: 821 cartons * 118 pcs = 96878 pcs

Read more less

Product Main Features: 1. Shorten the response speed of the electronic throttle 2. Improve the electronic throttles sensitivity 3. Plug and play without external power supply 4. 5 modes: sports mode / economy mode / original mode / manual mode / automatic mode 6. Super bright LED digital display screen Product Function: 1. Sports mode: This mode will bring very strong sense of controlling the vehicle when driving, it is more suitable for the passionate drivers. 2. Economy mode: This mode is more stable for acceleration, suitable for those that are fond of mild driving and green hands. 3. Original mode: This means the booster had no impact on the vehicle. 4. Manual mode: This mode has the best sports sense, suitable for those that are fond of passionable driving. 5. Automatic mode: The default mode is manual movement mode.Specification: General Compatible with Hyundai: Santa Fe Package Weight One Package Weight 0.33kgs / 0.72lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 80 Carton Weight 25.90kgs / 57.10lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 80 pcs = 41760 pcs40HQ: 1212 cartons * 80 pcs = 96960 pcs

Read more less

FeaturesThe Solar Power Manager (B) is compatible with general 6V~24V solar panels. It can recharge the 3.7V rechargeable Li-po battery through solar panel or USB TYPE-C connection, and provides 5V / 3A regulated output (with multi protocols support including PD/QC/FCP/PE/SFCP). The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep operating with high-efficiency, stability, and safety. It is suitable for solar powered, low-power IoT, and other environmental protection projects. 1. Support MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel 2. Flexible battery recharging: from solar panel or USB TYPE-C power adapter 3. Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input 4. Onboard MPPT SET switch, select the level closed to input level to improve recharging efficiency 5. Onboard aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance 6. PH2.0 battery connector, with embedded 10000mAh 3.7V rechargeable Li-po battery 7. Several LED indicators, for monitoring the status of solar panel and battery 8. Multi protection circuits: over charge / over discharge / reverse-proof / over heat / over current, stable and safe to useSpecification: Package Weight One Package Weight 0.35kgs / 0.77lb One Package Size 20cm * 15cm * 5cm / 7.87inch * 5.91inch * 1.97inch Qty per Carton 40 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 32cm * 27cm / 16.54inch * 12.6inch * 10.63inch Loading Container 20GP: 734 cartons * 40 pcs = 29360 pcs40HQ: 1705 cartons * 40 pcs = 68200 pcs

Read more less

1. Security system is used to secure consumer electronic gadgets in exhibition or store open display against theft. This innovative system is easy to operate and is able to blend easily in any exhibits layout. 2. Charging function: The stand alone security device built in lithium battery, if the power outages that is also with security function. One set of external 5V power adapter, and it can be supply products for charging. 3. Alarming function: - Contactor alarm: When we pull up the contactor and back of parts VBH adhesive, then it will immediately issued warming sound. - Cutting cable alarm: When the alarm cable was pulled apart or cut off, then it will immediately issued warming sound. 4. Remote control function: The infrared remote control, anti-interference ability, sensitivity strong. 5. Material: Aluminum alloy + ABS 6. Alarm volume: 95-100dB 7. Input voltage: 110-240V 8. Charging voltage: DC 5V 1A 9. Unlock: Infrared remote controlSpecification: General Compatible with Apple: iPhone 12, iPhone 12 Pro, iPhone 12 mini, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 11, iPhone XS, iPhone XS Max, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5S, iPhone 5C Package Weight One Package Weight 0.28kgs / 0.61lb One Package Size 14cm * 12cm * 9cm / 5.51inch * 4.72inch * 3.54inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 47cm * 50cm * 30cm / 18.5inch * 19.69inch * 11.81inch Loading Container 20GP: 378 cartons * 40 pcs = 15120 pcs40HQ: 878 cartons * 40 pcs = 35120 pcs

Read more less

1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, ensuring stable connection and efficient transmission.11. Integrated PoE module, making the development boards power supply more flexible.12. Only one network cable is needed to connect to a PoE device, enabling both networking and power supply for the ESP32-P4-WIFI6-POE-ETH.13. Dimensions: 55x68mm14. Package contents:- ESP32-P4-WIFI6-POE-ETH x 1- SH1.0 4PIN connecting cable (approx. 150mm) x 2- 1217 cavity speaker 8Ω 2W x 1- 2.4G antenna x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 72 Carton Weight 9.80kgs / 21.61lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 72 pcs = 44640 pcs40HQ: 1439 cartons * 72 pcs = 103608 pcs

Read more less

1. 4K Ultra HD Video: Capture stunning 4K ultra-high-definition videos with the L19 Vlog Pocket Camera. Experience crystal-clear footage that brings your memories to life.2. Advanced Stabilization: Equipped with three-axis electronic image stabilization (Gyro-EIS), this camera ensures smooth and steady footage even during dynamic movements, perfect for action-packed vlogs and travel videos.3. Versatile 180 Degree Rotating Lens: The 180-degree rotatable lens with auto-flip function allows for easy selfies and seamless switching between front and rear views, giving you ultimate flexibility in your shots.4. User-Friendly Touch Screen: Navigate your camera effortlessly with the built-in 1.69-inch HD touch screen, offering intuitive control over zoom, settings, and playback functions.5. Wi-Fi Connectivity: Share your content instantly with Wi-Fi hotspot connection, enabling quick transfers to your smartphone for immediate social media uploads.Specifications:1. Lens Angle: 180 degree Rotatable (Front & Rear), 90 degree Rotatable (Left & Right); 160 degree Wide Angle2. TFT Display: 1. 69-inch HD Touch Screen, Resolution 240x2803. Video Resolution & Frame Rate: 3840x2160P 30fps, 2720x1528P 30fps, 1920x1080P 30fps, 1920x1080P 60fps, 1280x720P 60fps, 1280x720P 120fps4. Photo Resolution: 48MP(9248x5216), 18MP(5760x3240), 10MP(4320x2430), 8MP(3840x2160), 5MP(2976x1692), 2MP(1920x1080)5. Gyro Stabilization: 3 Modes (Super Anti-shake / Normal Anti-shake / Off)6. Fill Light: On/Off7. Video Recording with Audio: On/Off8. Video Encoding Format: MP4 (H. 264/H. 265)9. Shooting Interval: Off/1s/3s/5s/10s/30s/1min10. Duration: Unlimited/5min/10min/15min/20min/30min/60min12. Time-lapse Video: 8 Modes (Off/2x/4x/5x/6x/10x/15x/30x Speed)13. Video Clip Length: Unlimited/1min/5min14. Burst Shooting: Off/3 Shots/7 Shots/15 Shots/30 Shots15. Self-timer: Off/2s/10s16. Exposure Adjustment: -2. 0/-1. 0/+0. 0/+1. 0/+2. 017. White Balance: Auto (AWB) / Manual (M)18. Filter Effects: Original/Black & White/Natural/Negative/Warm Tone/Contrast19. Scene Modes: Standard/Vivid/Cycling/Diving/Black & White/Night20. Volume Settings: Adjustable Operation Prompt Volume & Video Playback Volume21. Screen Saver: Auto-off Time (1min/3min/5min)22. LED Indicator: On/Off23. Screen Lock: On/Off24. WiFi Function: On/Off; Companion App: Wei You Yi Pai25. WiFi Reset: Support WiFi Name & Password Reset (Customizable via App)26. Language Settings: English, Simplified Chinese, Traditional Chinese, Kor., French, Spanish, German, Italian, Portuguese, Russian, Vietnamese, Japanese27. Time Stamp: Support Show/Hide Video Time Stamp28. Card Formatting: Support Memory Card Formatting29. System Info: Support Viewing Firmware Version30. AC Frequency: Support 50Hz/60Hz31. Auto Power Off: Off/1min32. Protection Rating: Non-waterproof, Dustproof33. Operating Humidity: 30 percent 34. Operating Temperature: -25~+75 degree centigrade35. Power Supply: USB 5V, Current Greater Than or Equal to 2A36. Built-in Battery Capacity: 2000mAh37. Memory Card Support: 4GB-512GB U3 High-speed Card38. Product Dimensions: 144. 5mmx38. 7mmx27mmSpecification: Package Weight One Package Weight 0.32kgs / 0.69lb One Package Size 17.5cm * 9cm * 5.6cm / 6.89inch * 3.54inch * 2.2inch Qty per Carton 40 Carton Weight 13.20kgs / 29.10lb Carton Size 47cm * 36cm * 25cm / 18.5inch * 14.17inch * 9.84inch Loading Container 20GP: 630 cartons * 40 pcs = 25200 pcs40HQ: 1463 cartons * 40 pcs = 58520 pcs

Read more less

1. Equipped with the ESP32-C6 high-performance 32-bit RISC-V processor, with a main frequency of up to 160 MHz2. Supports Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, featuring excellent radio performance and an onboard antenna3. Built-in 512KB HP SRAM, 16KB LP SRAM and 320KB ROM, with an external 16MB Flash4. Utilizes the Type-C interface, enhancing user convenience and device compatibility5. Equipped with a 2.16-inch capacitive touch high-definition AMOLED screen, with a resolution of 480 x 480, 16.7M colors, capable of clearly displaying color images6. Built-in CO5300 driver chip and CST9220 capacitive touch chip, communicating via QSPI and I2C interfaces respectively, without occupying excessive interface pin resources7. Built-in QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), capable of detecting motion posture, step counting and other functions8. Built-in PCF85063 RTC chip, connected to the battery through AXP2101, achieving uninterrupted power supply9. Built-in two customizable side buttons, KEY and BOOT, facilitating the development of custom functions using the buttons10. Built-in 3.7V MX1.25 lithium battery charging and discharging interface11. Exports 1 I2C, 1 UART and 1 USB pad, available for external devices and debugging use12. The benefits of using AMOLED screen include efficient power management, support for multiple output voltages, charging and battery management functions, and optimization of battery life13. Using AMOLED screen, one can achieve higher contrast, wider viewing angle, richer colors and faster response, and the body is thin, with low power consumption and flexibility advantagesParameters1. Display panel: AMOLED2. Display resolution: 480 x 480 pixels3. Display brightness: 600cd/square meter4. Communication interface: QSPI5. Touch control: upported6. Display size: 2.16 inches7. Display color: 16.7M8. Contrast ratio: 100000:19. Driving IC: CO530010. Touch IC: CST9220Specification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 8cm * 8cm * 6cm / 3.15inch * 3.15inch * 2.36inch Qty per Carton 144 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 144 pcs = 59328 pcs40HQ: 958 cartons * 144 pcs = 137952 pcs

Read more less

1. NRF24L01P + PA + LNA Division for the ultra-long-distance data transmission, specially developed high-power and high sensitivity wireless module 2.4G ISM band NRF24L01P + PA + LNA wireless module to work in the license-free that can be point-to-point applications or be composed of a star network.2. Digital transmission chip NRF24L01+ with the Division of Professional Design professional full two-way RF power amplifier high power PA and LNA chip, RF switches and band pass filters, makes effective communication distance greatly expand.3. RF part, it has been done a lot of optimization matching debugging. The emission efficiency to achieve the highest harmonic minimum and make NRF24L01P + PA + LNA wireless module of RF interference to the external equipment reaches minimum, while not susceptible to interference from other devices.4. NRF24L01P + PA + LNA wireless module integration is extremely high, the size is 41mm x 15.5mm to make conveniently embedded.5. Working Voltage: 3.0~3.6V, (recommended 3.3V); 6. Maximum power: 20dBm; 7. Transmit mode operating current (peak): 115mA; 8. Operating current receive mode (peak): 45mA; 9. Power-down mode current: 4.2uA10. Package List - 1 x Wireless module- 1 x AntennaSpecification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 6cm * 3cm * 1cm / 2.36inch * 1.18inch * 0.39inch Qty per Carton 5200 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 5200 pcs = 1476800 pcs40HQ: 661 cartons * 5200 pcs = 3437200 pcs

Read more less