Search results for "motorcycle electronics"

1. Material: plastic2. Size: about 14x9.7x4 cm3. Frequency: 433MHz4. Power supply: AC220V 50HZ5. Remote control distance: within 50 meters6. Chip model: ev15277. Power supply: contains 23A 12V lithium battery8. Scope of application: suitable for 8-hole 6-wire external motorFeatures:1. Universal type with eight holes and six wires, easy to connect2. The shell is made of reinforced plastic, which is environmentally friendly and durable, with strong compression resistance, anti-fall and anti-corrosion3. Device learning code + dial code dual decoding dual purpose, you can increase the number of handles at any time4. 2 read 20 million sets of passwords, can learn 20 different remote control handles, one-key fast switch, fast response speed5. The integrated superheterodyne module in the main board, the precision components are integrated in the sealed area, moisture-proof, high sensitivity, and increase the signal distanceAdd remote control, code matching and clearing methods:1. Learning remote control: Install the dial button on the left and right, dial back and forth 4 times continuously,Long press any button of the new remote control, the receiver indicator flashes quickly, and the learning is complete.2. Dial code: adjust up and down in sequence according to the dialing method3. Delete the remote control: Install the dial button on the left and right, dial back and forth 6 times continuously, the receiver indicator flashes quickly, and the code clearing can be successfulInstall left and rightOperation direction adjustment:1. Remote control switching method: press the stop button and the up button of the original handle at the same time and hold for two seconds, the indicator light of the remote control host will go out, at this time please release the up button, if the indicator light returns to light, release it again to stop Key, the host indicator light flashes quickly and then keeps on, the switch is successful2. Physical button method: install the dial button on the left and right and dial to the other sideSpecification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 20cm * 16cm * 6cm / 7.87inch * 6.3inch * 2.36inch Qty per Carton 60 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 60 pcs = 10620 pcs40HQ: 412 cartons * 60 pcs = 24720 pcs

Read more less

1. 1024x600 high resolution 2. Compatible with Raspberry Pi 2B/3B/Zero/Zero W 3. The TFT LCD is directly driven by Raspberry Pi DPI interface, refresh rate up to 60Hz 4. Supports Raspbian, Ubuntu, OSMC, etc. 5. Backlight can be turned off to lower power consumption 6. Compact size, suit for various projects 7. Note: This item can be used for displaying ONLYSpecification: Package Weight One Package Weight 0.35kgs / 0.77lb One Package Size 20cm * 12cm * 10cm / 7.87inch * 4.72inch * 3.94inch Qty per Carton 12 Carton Weight 4.60kgs / 10.14lb Carton Size 36cm * 32cm * 32cm / 14.17inch * 12.6inch * 12.6inch Loading Container 20GP: 723 cartons * 12 pcs = 8676 pcs40HQ: 1679 cartons * 12 pcs = 20148 pcs

Read more less

This product is a microcontroller development board that supports 2.4GHz Wi-Fi and BLE 5. It features high-capacity Flash and PSRAM, along with an onboard 7-inch LCD screen capable of smoothly running GUI applications such as LVGL. Equipped with a variety of peripheral interfaces, it enables rapid development of HMI (Human-Machine Interface) and other applications based on the ESP32-S3.Powered by a high-performance Xtensa 32-bit LX7 dual-core processor with a clock frequency of up to 240MHz.Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with options for onboard or external antennas.Includes 512KB of internal SRAM and 384KB of ROM, with an additional 16MB of Flash and 8MB of PSRAM integrated via a stacked package.Features an onboard 7-inch LCD screen with 800 ?? 480 resolution and 65K-color display.Includes onboard interfaces such as CAN, RS485, and I2C, as well as a Micro SD card slot and an integrated full-speed USB serial port.Supports flexible clock management and independent power control for various modules, enabling low-power operation across diverse application scenarios.Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 20cm * 20cm * 5cm / 7.87inch * 7.87inch * 1.97inch Qty per Carton 12 Carton Weight 3.50kgs / 7.72lb Carton Size 42cm * 22cm * 32cm / 16.54inch * 8.66inch * 12.6inch Loading Container 20GP: 901 cartons * 12 pcs = 10812 pcs40HQ: 2093 cartons * 12 pcs = 25116 pcs

Read more less

Overview1. This is a Raspberry Pi LoRa HAT based on SX1268, covers 433MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 84 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1268 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12682. Frequency band: 410.125 ~ 493.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 110mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1268 433MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 433MHz antenna x1Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Read more less

Stay powerful, anywhere in the world. The Mophie Charge Stream Travel Kit is a complete wireless charging solution built for life on the move. Inside one neat travel pouch, you'll find Mophie's compact Charge Stream Pad Mini, a 2.4A wall adapter with interchangeable plugs for the UK, US, Europe, China and Australia, a 2.4A car charger, a 1.5m USB-A to Micro-USB cable, and a soft carrying pouch to keep it all organised. Wireless charging at home, in the car, in the hotel room, on every continent. At the heart of the kit is the Charge Stream Pad Mini — Mophie's smallest Qi-certified wireless charging pad. Just under 6cm square and barely 2cm thick, it weighs almost nothing and slips into any bag, pocket or hotel drawer. Drop your Qi-enabled phone onto the rubberised top and a steady, efficient 5W charge begins on contact. No cables to plug in. No fiddling with connectors. No different ports for different phones. Just place and charge. The clever interchangeable wall adapter is what makes this kit a proper travel essential. Snap on the UK plug for home, swap to the US or EU plug for your next trip, or use the car adapter for road journeys — all powered from the same single unit. The 2.4A output charges quickly, the included Micro-USB cable handles connection to the pad, and the soft pouch keeps the whole kit packed tidily for your next flight. Compatible with every Qi-enabled smartphone — iPhone, Samsung Galaxy, Google Pixel and beyond — and capable of charging through phone cases up to 3mm thick, this is wireless charging the way it should be: simple, portable, and ready for anywhere your travels take you. Built by Mophie, trusted by professionals. Key Highlights Complete wireless travel kit — pad, wall adapter, car charger, cable and pouch Universal Qi wireless charging — works with iPhone, Samsung, Google and any Qi-enabled phone 5W charging output — steady, reliable charge from the moment you place your phone Interchangeable international plug heads — UK, US, Europe, China and Australia included 2.4A USB wall adapter — fast, efficient power delivery 2.4A USB car charger — keep charging on every road trip 1.5m USB-A to Micro-USB cable included Charges through phone cases up to 3mm thick Rubberised non-slip top and bottom — phone stays put, pad stays put LED charging indicator — confirms power is flowing Compact Charge Stream Pad Mini — fits in any pocket, drawer or bag Soft carrying pouch keeps the whole kit organised for travel Trusted Mophie quality — premium build, properly engineered Why Travellers Love This Kit A genuine charging upgrade for anyone on the move: One kit covers every plug socket worldwide — no more last-minute adapter shopping Wireless charging means no fiddling with different cables for different phones Compact pad slips onto any hotel bedside table or office desk Car charger keeps you topped up between meetings or on long drives Soft pouch keeps everything tidy in your carry-on or laptop bag Works through your case — no need to remove your phone every time Perfect For A premium wireless travel essential for every kind of user: Business travellers and frequent flyers Holidaymakers visiting multiple countries Commuters charging on the go in car or office Hotel stays, Airbnbs and short-term rentals Digital nomads working from anywhere Couples or families sharing one kit on holiday Anyone with a Qi-enabled iPhone, Samsung or Android device Gifts for travellers, professionals or new phone owners Office desks, hot-desk setups and home workstations Product Specifications Detail Brand Mophie Product Charge Stream Universal Wireless Travel Kit Wireless Charging Qi-certified, up to 5W output Wall Adapter Output 2.4A USB Car Charger Output 2.4A USB Included Cable USB-A to Micro-USB, 1.5m length International Plugs UK, US, Europe, China, Australia Case Compatibility Charges through cases up to 3mm thick Compatibility All Qi-enabled smartphones (iPhone, Samsung, Google Pixel, more) Charging Indicator LED status light Packaging Soft travel pouch included Condition Brand new, in original packaging Easy to Use, Built for Travel Designed for stress-free everyday charging: Plug the wall or car adapter into your power source Snap on the plug head for your country Connect the Micro-USB cable to the Charge Stream Pad Mini Place your Qi-enabled phone on the pad — charging starts instantly LED light confirms the charge is active Pack everything back into the pouch when you're done What's in the Box 1 × Mophie Charge Stream Pad Mini (wireless charging pad) 1 × 2.4A USB wall adapter 4 × International plug heads (UK / US / Europe / China / Australia) 1 × 2.4A USB car charger 1 × USB-A to Micro-USB cable (1.5m) 1 × Soft travel pouch 1 × User manual Original Mophie retail packaging Phone not included. Stay powerful, anywhere. Add the Mophie Charge Stream Universal Wireless Travel Kit to your bag today — premium build, Qi wireless charging, and ready for every plug socket in the world.

Read more less

1. Processor: LX7 dual-core processor 2. Network: 2.4GHz Wi-Fi3. Bluetooth: BLE 5 4. Screen size: 7 inches 5. Resolution: 800 x 480 6. Other Features: On-board antenna, 5-point touch, 65K colors, audio playback, audio capture, PCF85063 RTC clock, BQ27220 battery monitor7. Interfaces: Type-C, Micro SD card slot, 3.5mm8. Power Supply: Supports wide voltage range of DC 7–36V9. Dimensions: Approx. 19.5 x 11.3 x 2.3 cmFeatures:1. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240 MHz 2. Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE, with an onboard antenna 3. Built-in 512 KB SRAM and 384 KB ROM, with 32 MB Flash and 16 MB PSRAM stacked on the same die 4. On-board 7-inch LCD capacitive touchscreen, 800 x 480 resolution, 65K colors5. Supports I2C interface for capacitive touch control, 5-point touch, and interrupt support 6. On-board ES8389 audio codec chip and ES7210 echo cancellation circuit 7. On-board voltage regulator chip, supporting a wide supply voltage range of 7–36 V 8. On-board RTC chip and battery holder; time is retained during power outages when a battery is installed9. On-board BQ27220 battery fuel gauge for real-time monitoring of battery capacity10. On-board I2C interface, Micro SD card slot, and PH2.0 battery connector11. External LED indicators for easy monitoring of power and battery charging status, including a custom STA status light 12. Supports flexible clock settings and precise control, such as separate module power supply configuration, to enable low-power modes for multiple scenariosSpecification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 23cm * 15cm * 6cm / 9.06inch * 5.91inch * 2.36inch Qty per Carton 20 Carton Weight 9.00kgs / 19.84lb Carton Size 48cm * 32cm * 30cm / 18.9inch * 12.6inch * 11.81inch Loading Container 20GP: 578 cartons * 20 pcs = 11560 pcs40HQ: 1343 cartons * 20 pcs = 26860 pcs

Read more less

1. Size: 16.2*9.6*3.6cm 2. Weight: 200g 3. DC input voltage: 12V/2.0A 4. USB is only used as 5V mobile output, the output current is 1000mA, and the output of USB connected to power supply is invalid. 5. USB 5V output is only valid for 3.7V lithium battery, and Ni-MH boost is not valid. 6. Charging current of lithium battery: 4.2V 300mA/500mA/700mA/1000mA 7. Charging current of Ni-MH battery: 1.48V 300mA/500mA/700mA/1000mA 8. Charger has 6 keys, mode selection key (MODE), current selection key (CURREN), independent selection and view data key (1234), which is simple and convenient to use. 9. In any case, hold down the MODE key and hold for 3 seconds to change the CHARGE (charging) mode or FAST TEST, NOR TEST (capacity detection) mode, and then press the corresponding function button again in 8 seconds to change. It can enter the working state eight seconds after the current, independent, mixed charging, capacity detection and selected function. In the working state, it can press the (1234) key lightly to view the current (mA)./ Capacity (mAh) / Voltage (V) / Time (h) / Internal Resistance (mR) Data Reference Value. 10. Specifications of rechargeable batteries: 18650, 26650, 14500, AA, AAA, etc. Warning 1. The charger can only charge cylindrical lithium-ion batteries and nickel-hydrogen batteries, but not lithium iron phosphate batteries. 2. Before use, please refer to the instructions carefully and pay attention to the recommended charging current of the rechargeable battery. Do not charge more than the recommended current. 3. Do not use other power adapters. 4. Charger charging and discharging may be hot, pay attention not to scald; 5. When stopping using, please unplug the power supply and battery. 6. It can only be used indoors. 7. The test data of this product are for reference only. Refer to the professional instruments for the actual situation.Specification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 20cm * 15cm * 5cm / 7.87inch * 5.91inch * 1.97inch Qty per Carton 40 Carton Weight 10.90kgs / 24.03lb Carton Size 52cm * 37cm * 37cm / 20.47inch * 14.57inch * 14.57inch Loading Container 20GP: 374 cartons * 40 pcs = 14960 pcs40HQ: 869 cartons * 40 pcs = 34760 pcs

Read more less

Product Main Features: 1. Shorten the response speed of the electronic throttle 2. Improve the electronic throttles sensitivity 3. Plug and play without external power supply 4. 6 modes/46 degrees adjustable 5. Full accelerating mode / semi accelerating mode / original accelerator mode / economic mode available 6. It can get into the original car mode while reversing for optional 7. Super bright LED digital display screen, blue / red for optional Product Function: 1. FH mode: Applicable to manual transmission automobile. It can improve instant acceleration property and explosive force of automobile to obtain optimal acceleration effect through improving response speed of auto electronic choker. Note: There are 9 micro-adjustment sections of manual full acceleration the sense of weak-to-strong acceleration is extremely evident. 2. FA mode: Applicable to automatic transmission automobile. It can improve instant acceleration property and explosive force of automobile to obtain optimal acceleration effect through improving response speed of auto electronic choker. Note: There are 9 micro-adjustment sections of automatic full acceleration the sense of weak-to-strong acceleration is extremely evident. 3. HH mode: Applicable to manual transmission automobile. It can improve instant acceleration property and explosive force of automobile to obtain optimal acceleration effect through improving response speed of auto electronic choker. Note: There are 9 micro-adjustment sections of manual semi-acceleration the acceleration effect is slightly poorer than the effect of manual full acceleration. 4. HA mode: Applicable to automatic transmission automobile. It can improve instant acceleration property and explosive force of automobile to obtain optimal acceleration effect through improving response speed of auto electronic choker. Note: There are 9 micro-adjustment sections of automatic semi-acceleration the acceleration effect is slightly poorer than the effect of automatic full acceleration. 5. NOR mode: This mode is equivalent to original auto control mode which features balance between sports and comfort. 6. EC mode: This mode delays the response of choker and can achieve economical and environmental-friendly effect.Specification: General Compatible with Jeep: Wrangler JK Package Weight One Package Weight 0.33kgs / 0.72lb One Package Size 21cm * 15cm * 5cm / 8.27inch * 5.91inch * 1.97inch Qty per Carton 25 Carton Weight 9.20kgs / 20.28lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 25 pcs = 15500 pcs40HQ: 1439 cartons * 25 pcs = 35975 pcs

Read more less

1. RP2350B microcontroller chip designed for Raspberry Pi2. Unique dual-core, dual-architecture design featuring dual-core ARM Cortex-M33 processors and dual-core Hazard3 RISC-V processors, each clocked at up to 150MHz, enabling flexible switching between architectures3. Integrated 520KB SRAM, 16MB on-chip Flash, and 2MB PSRAM4. Features a Type-C interface for reversible plugging5. Onboard 7-inch capacitive LCD display with 800 × 480 resolution and 65K colors6. Supports I2C interface for capacitive touch control, 5-point touch, with interrupt support (touch version only)7. Onboard interfaces include Sensor, CAN, RS485, I2C, and UART8. USB 1.1 host and device support9. Supports low-power sleep and hibernation modes10. USB mass storage mode for drag-and-drop program downloads11. Precise on-chip clock and timers12. Built-in temperature sensor for real-time chip temperature monitoring13. 12 programmable I/O (PIO) state machines for custom peripheral supportPackage contents:- Display x 1- HY2.0 2-pin to male DuPont connector 2-pin about 10cm x 2- HY2.0 3-pin to male DuPont connector 3-pin about 10cm x 1- HY2.0 4-pin to male DuPont connector 4-pin about 10cm x 2- Screw set x 1Specification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 20cm * 14cm * 4cm / 7.87inch * 5.51inch * 1.57inch Qty per Carton 36 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 38cm * 30cm / 16.54inch * 14.96inch * 11.81inch Loading Container 20GP: 556 cartons * 36 pcs = 20016 pcs40HQ: 1292 cartons * 36 pcs = 46512 pcs

Read more less

Product Main Features: 1. Shorten the response speed of the electronic throttle 2. Improve the electronic throttles sensitivity 3. Plug and play without external power supply 4. 5 modes: sports mode / economy mode / original mode / manual mode / automatic mode 6. Super bright LED digital display screen Product Function: 1. Sports mode: This mode will bring very strong sense of controlling the vehicle when driving, it is more suitable for the passionate drivers. 2. Economy mode: This mode is more stable for acceleration, suitable for those that are fond of mild driving and green hands. 3. Original mode: This means the booster had no impact on the vehicle. 4. Manual mode: This mode has the best sports sense, suitable for those that are fond of passionable driving. 5. Automatic mode: The default mode is manual movement mode.Specification: General Compatible with Subaru: Outback Package Weight One Package Weight 0.26kgs / 0.57lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 80 Carton Weight 25.90kgs / 57.10lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 80 pcs = 41760 pcs40HQ: 1212 cartons * 80 pcs = 96960 pcs

Read more less

1. Based on the RP2350 main controller, it supports external interfaces such as RS485 and Pico, and features built-in power isolation and optocoupler isolation protection circuits for enhanced safety, stability, and reliability.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.3. Equipped with a Raspberry Pi Radio Module 2, supporting Wi-Fi 4 wireless network and Bluetooth 5.2 (Wi-Fi module version only).4. Built-in 520KB SRAM and 16MB on-chip Flash. Uses a Type-C interface, eliminating concerns about correct plug orientation.5. Uses high-quality relays, allowing connection to loads: 10A 250V AC or 10A 30V DC.6. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.7. On-board Pico-compatible interface, compatible with some Raspberry Pi Pico expansion boards, facilitating the expansion of functions such as RTC, CAN, RS232, LoRa, and sensors.8. On-board terminal block power supply interface, supporting a wide voltage range of 7V~36V, convenient for industrial power supply use.9. On-board optocoupler isolation to prevent high-voltage circuits connected to the relay from interfering with the control chip.10. On-board digital isolation to prevent external signals from interfering with the control chip.11. On-board integrated power isolation provides a stable isolated voltage; no additional power supply is required for the isolated end.12. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.13. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.14. Rail-mounted ABS protective casing for easy installation and safer use.15. USB 1.1 host and device support.16. Supports low-power sleep and hibernation modes.17. Controllable via USB. Identified as a mass storage device for drag-and-drop program downloading18. 34 multi-functional GPIO pins19. 1 HSTX pin, 2 I2C pins, 2 UART pins, 8 12-bit ADC pins, and 24 controllable PWM channels20. 12 programmable I/O (PIO) state machines for custom peripheral supportProduct parameters:1. Power supply voltage: 5V2. Functions: device power supply, USB communication, and firmware download, etc.3. Interface type: terminal block4. Direction control: hardware automatically detects and controls data transmission direction5. Interface protection: provides TVS tube protection, surge and electrostatic protection6. Matching resistor: default NC, 120R matching resistor reserved, can be enabled with a jumper cap7. Contact type: one normally open, one normally closed8. Isolation type: optocoupler isolation9. RGB: colorful cool LED beads, customizable display colors10. PWR: power indicator light, lights up red when USB is connected and voltage is detected11. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface12. RXD: receive indicator light, lights up blue when data is received from the RS485 interface13. Power supply range: 7V-36V14. Casing: rail-mounted ABS protective casing15. Dimensions: 145 x 90 x 40 mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 17cm * 12cm * 6cm / 6.69inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 3.20kgs / 7.05lb Carton Size 36cm * 38cm * 32cm / 14.17inch * 14.96inch * 12.6inch Loading Container 20GP: 609 cartons * 30 pcs = 18270 pcs40HQ: 1414 cartons * 30 pcs = 42420 pcs

Read more less

1. 412 × 412 resolution, 16.7M colors, capable of clearly displaying color images2. High-transmittance touchscreen with fast response and long service life3. Built-in SPD2010 display and touch controller chip; uses QSPI and I2C interfaces for communication, minimizing pin usage; compatible with mainboards such as Raspberry Pi, Pico, ESP32 S3, Arduino, and STM324. Driver chip: SPD20105. Operating voltage: 3.3V / 5V6. Display panel: IPS7. Touch type: Capacitive8. Display size: 36.96 × 36.96 mm9. Brightness: 450 cd/m210. Product dimensions: 44.77 × 44.77 mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 6.90kgs / 15.21lb Carton Size 32cm * 34cm * 42cm / 12.6inch * 13.39inch * 16.54inch Loading Container 20GP: 583 cartons * 96 pcs = 55968 pcs40HQ: 1354 cartons * 96 pcs = 129984 pcs

Read more less