Search results for "electronics"

Features1. It is suitable for measuring the insulation resistance of various electrical equipment and insulating materials such as transformer, motors, cables, switches, electrical appliances, etc. 2. Icon display/alarm light on/buzzer alarm three types of alarms to prevent the danger of electric shock. Multiple gears can be selected to measure high and low, and the voltage can be measured after shifting. 3. This instrument is a high performance digital instrument, with large LCD display, display screen make it easy to read measurements. 4. Insulation resistance meter is beautiful, wide range, high accuracy, high resolution, convenient operation, easy to carry. 5. Resistance short circuit protection makes the measurement safer and more assured. Carry out maintenance, testing and verification of various electrical equipment.Functions1. Measurement of insulation resistance 2. AC measurement 3. DC measurement 4. Small resistance measurement 5. Live detection of tested resistance 6. Short circuit protection of measured resistance 7. AC and DC automatic identification 8. Measurement data is locked. 9. Polarization Index 10. Absorption ratio test 11. Automatic discharge 12. Low battery reminder 13. Large LCD screen digital display 14. External DC power supply DC9V 1.5A 15.10M internal resistance measurement 16. Over limit alarm 17. Auto range 18. Red alarm light, buzzer alarm. 19. High voltage alarm 20. Test voltage displaySpecification1. Technical parameters display: Large-screen LCD (up to 500 counts). 2. Over limit indication: Hi: The mark appears on insulation resistance range. 3. Auto range: Higher range: 500 counts, Lower range: 1 count (only on insulation resistance range) 4. Sampling Rate: 2 times / second 5. Allowed altitude: Less than or equal 2000m (for indoor use) 6. Operation environment: Temperature: 0-40 degree C / Humidity: Less than or equal 85% 7. Operation environment: Temperature: -20-60 degree C / Humidity: Less than or equal 90% 8. Overload protection: Insulation resistance range: AC 1200V / 10 seconds; Voltage range: AC 720V / 10 seconds 9. Withstand voltage:AC 6000V (50 / 60Hz) / 5 seconds (between circuit and periphery) 10. Insulation resistance: Greater than or equal 1000M ohms / DC 1000V (between circuit and periphery) 11. Power supply: DC 9V (6x1.5V AA batteries, not included) 12. Current consumption: Approximately 1.5A (normally maintained at approximately 50mA) 13. Battery Life: About 12 hours 14. Dimension: 176 x110 x 77mmSpecification: Package Weight One Package Weight 1.00kgs / 2.21lb One Package Size 21cm * 20cm * 10cm / 8.27inch * 7.87inch * 3.94inch Qty per Carton 10 Carton Weight 11.50kgs / 25.35lb Carton Size 50cm * 43cm * 26cm / 19.69inch * 16.93inch * 10.24inch Loading Container 20GP: 477 cartons * 10 pcs = 4770 pcs40HQ: 1107 cartons * 10 pcs = 11070 pcs

Read more less

1. The CAN FD TO ETH is a DIN rail-mounted CAN FD to Ethernet device, featuring high speed, low latency, stable performance, ease of use, and high cost-effectiveness. It supports five data conversion modes: transparent, transparent with ID, standard protocol, Modbus, and custom frame header/footer, enabling interconnection between CAN and Ethernet devices, and is compatible with CAN FD and CAN 2.0A/2.0B protocols.2. The product adopts an industrial-grade design for stable operation and supports a wide voltage range of 9V to 36V. The arbitration domain baud rate is 5Kbps to 1Mbps, and the data domain baud rate is 100Kbps to 5Mbps.3. The device supports PC software configuration, has a built-in 120-ohm bus resistor (quick access via DIP switch), supports DIN rail mounting, and offers convenient configuration and efficient installation.4. Working voltage: DC 9V ~ 36V5. Dimensions: 110 x 27 x 76.1 (mm)6. Installation method: DIN rail mounting7. Reload button: long press to restore factory settings8. Indicators: POWER, WORK, NET, and CAN9. CAN port specifications: 1 CAN port, supports CAN FD, compatible with CAN 2.0A/2.0B10. CAN port baud rate: arbitration domain baud rate: 5Kbps ~ 1Mbps;11. Data domain baud rate: 100Kbps ~ 5Mbps12. Termination resistor: built-in 2 CAN bus 120-ohm termination resistors. The resistors are connected via DIP switches. Setting any one DIP switch to ON connects one 120-ohm resistor; setting both DIP switches to ON connects two 120-ohm resistors in parallel.13. Network port specifications: RJ45, 10/100Mbps, auto-negotiation for crossover/straight-through cables14. Network protocols: TCP server, TCP client, UDP server, and UDP client15. Modbus gateway: CAN FD to ModbusTCP (Master/Slave)16. Transmit messages: supports configuring up to 64 transmit messages17. Receive messages: supports configuring up to... 64 received messages18. Conversion modes: transparent conversion, Transparent conversion with ID, Standard conversion, Modbus conversion, and Custom frame header and footer conversion19. CAN ID: supports standard frames and extended frames20. Frame ID filtering: supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)21. Packet frame number and time: supports custom packet frame number and custom packet time22. Conversion direction: supports bidirectional conversion, Ethernet to CAN only, and CAN to Ethernet only23. Firmware upgrade: supports firmware upgrade via PC software24. Parameter configuration: AT commands, PC software configuration25. Other functions: supports heartbeat packets, registration packets, normal, loopback, and listen-only operating modes26. Electrostatic discharge protection: air discharge 8KV, contact discharge 6KV27. Electrical fast transient/burst: power supply circuit 2KV, Ethernet and CAN port circuits 1KV28. Surge immunity test: power supply circuit differential mode 1KV, common mode 2KV, CAN circuit common mode 2KV, Ethernet circuit 2KVSpecification: Package Weight One Package Weight 0.56kgs / 1.24lb One Package Size 13cm * 11cm * 5cm / 5.12inch * 4.33inch * 1.97inch Qty per Carton 54 Carton Weight 31.40kgs / 69.22lb Carton Size 51cm * 35cm * 32cm / 20.08inch * 13.78inch * 12.6inch Loading Container 20GP: 466 cartons * 54 pcs = 25164 pcs40HQ: 1083 cartons * 54 pcs = 58482 pcs

Read more less

1. This is a flame retarded panel. 2. Support pressure overcurrent protection. 3. Easy to install, the same way as ordinaral sockets, can be mounted on a wall or desktop and other locations 4. USB charging application: Suitable for all kinds USB 5V charge, such as a variety of cellphones, digital cameras and other electronic digital products. 5. Applications: Site dormitory, school dormitories, offices quarters, corporate offices, railway stations and so on.Specification: General Connector USB 2.0 Material PC Input Voltage 36V USB Output Voltage 5V USB Output Current 3.1A Size 8.6*8.6*3.5cm Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 9cm * 9cm * 4cm / 3.54inch * 3.54inch * 1.57inch Qty per Carton 160 Carton Weight 16.20kgs / 35.71lb Carton Size 47cm * 45cm * 25cm / 18.5inch * 17.72inch * 9.84inch Loading Container 20GP: 504 cartons * 160 pcs = 80640 pcs40HQ: 1170 cartons * 160 pcs = 187200 pcs

Read more less

1. Built-in surround microphone, 360-degree panoramic sound pickup2. Equipped with smart noise reduction chip, 1536K lossless recording3. High-power speaker, SSQVP-EX sound digital enhancement, clearer external speaker4. Support voice-controlled recording, automatic voice recognition, efficient and convenient5. Support multi-APP voice recording, can be connected to mobile phones, tablets, mixers6. Built-in large-capacity polymer lithium battery, Type-C charging7. Support TF card up to 512GB (Not include memory card)8. Recording format: WAV9. Size: 8.6x3.6x1.2cmSpecification: General Certificate MSDS Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 16cm * 11cm * 2cm / 6.3inch * 4.33inch * 0.79inch Qty per Carton 160 Carton Weight 10.50kgs / 23.15lb Carton Size 44cm * 32cm * 36cm / 17.32inch * 12.6inch * 14.17inch Loading Container 20GP: 526 cartons * 160 pcs = 84160 pcs40HQ: 1221 cartons * 160 pcs = 195360 pcs

Read more less

Overview1. Equip your micro:bit with this 4-DOF metal robot arm, and get started to explore the world of artificial intelligent robotic.2. This starter robotic arm kit includes: servo driver board, metal mechanical arm structure, and 4x metal gear servos. When used with the micro:bit, it is easy to control the arm by smart phone through Bluetooth connection.The Servo DriverAdopts Servo Driver for micro:bit:1. Micro:bit edge connector, directly pluggable2. I2C controlled, using only 2 pins3. Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)4. Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal5. Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.6. Reserved I2C control pins, allows to work with other control boards7. Comes with development resources and manual (micro:bit graphical examples like Bluetooth/2.4G wir eless remote control)The Robot Arm Structure1. 4-DOF, large solid base, metal mechanical grasper2. Full aluminium alloy body, sandblasting oxidation surface, strong & durable3. Clever mechanical structure and mounting design, agile to control, easy to build3. Fitted with 4x metal gear servos (1x MG996R, 3x MG90S), large torque force, smooth movingPackage IncludeNote: micro:bit is NOT included.1. Metal arm parts x12. MG996R Servo x13. MG90S Servo x34. MG996R servo wheel x15. Servo Driver for micro:bit x16. Power adapter US plug 5V 3A Micro x17. Servo extension wire 150mm x18. Screws pack x19. Screwdrivers 2PCS x1Specification: Package Weight One Package Weight 0.55kgs / 1.21lb One Package Size 25cm * 15cm * 8cm / 9.84inch * 5.91inch * 3.15inch Qty per Carton 20 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 30cm * 40cm / 19.69inch * 11.81inch * 15.75inch Loading Container 20GP: 444 cartons * 20 pcs = 8880 pcs40HQ: 1031 cartons * 20 pcs = 20620 pcs

Read more less

Overview1. This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 915MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 915MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 44.80kgs / 98.77lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs

Read more less

1. Brand new and high quality. 2. Small and lightweight, easy to carry. 3. Display devices use high bright LED digital tube, stunning display effect. 4. With reverse polarity protection, reverse not burned. 5. The voltmeter only two wires, wiring simple and reliable performance. 6. Suitable for measuring DC voltage, no need external power, measure range: 4.5V ~ 30V. 7. Wide voltage to work, red measure min voltage 2.5V, safe load voltage max 40V, over 40V, maybe damaged. 8. When measuring voltage below 10V, two digits are displayed after the decimal point; when measuring voltage above 10V, one digit is displayed after the decimal point.Specification: General Material Electronic Component Current <30mA Measure Range DC 4.5-30V Input impedance >50Kohm Operating Temperature -10 ~ 65 Degree Celsius Cable Length 20cm Operating Humidity 10 ~ 80% Reading Display 0.56 inch Cutting Size 45.5x25.5mm Size 48x29x22mm Weight 16g Package Weight One Package Weight 0.17kgs / 0.38lb One Package Size 18cm * 10cm * 7cm / 7.09inch * 3.94inch * 2.76inch Qty per Carton 80 Carton Weight 14.50kgs / 31.97lb Carton Size 52cm * 37cm * 36cm / 20.47inch * 14.57inch * 14.17inch Loading Container 20GP: 385 cartons * 80 pcs = 30800 pcs40HQ: 893 cartons * 80 pcs = 71440 pcs

Read more less

Features1. Solar power panels use monocrystalline solar cells, which are much more efficient than ordinary solar cells. 2. Foldable design for more convenient carrying. 3. Equipped with voltage regulator, the voltage output is more stable and the charging is more secure. 4. Comfortable fabric, not afraid of the sun, not afraid of rain, charging without worry. 5. Connect directly to your device via the USB port. 6. Comes with a pocket to keep the device safely stored during the charging process.Specifications1. Input voltage range: DC8-24V 2. Dimensions: Fold: 45.5cm x 45cm x 2.5cm, unfold: 160cm x 45.5cm DC interface 1. Output voltage: Solar output voltage DC8-24V 100W 2. Protection: Anti-reverse charging protection (20A anti-reverse charging diode) 3. DC port specification: 5521 metal material USB1 interface (black): 1. Output voltage: 5.1v+/-0.2v 2. Output power: 15W 3. Output protection: Input over-voltage, under-voltage, output over-current, short-circuit protection, over-temperature protection of the whole machine. CC mode 4. Output charging protocol: Support iOS 2.1A, suitable for Samsung 2.0A DP=1.2V, DM=1.2V Support BC1.2 DP and DM short circuit 5. Conversion efficiency: Greater than 85% USB2 interface (orange): 1. Output voltage: 5V-12V automatically adjusted according to the fast charging protocol 2. Output power: 18W (5V3A 9V2A 12V1.5A etc.) 3. Output protection: input over-voltage, under-voltage, output over-current, short-circuit protection, over-temperature protection of the whole machine. CC mode 4. Output charging protocol: support QC3.0/QC2.0 Qualcomm certificate number: 478786303-2 - Support QC3.0 Class A: 3.6v-12v (0.2v/step) - Support QC2.0 Class A: 5V 9V 12V - Support voltage configuration for Huawei FCP fast charge 5V 9V - Support voltage configuration for Samsung AFC fast charge 5V 9V - Support Spreadtrum SFCP fast charge 5V 9V 12V voltage configuration - Support iOS 2.4A: DP=2.7V, DM=2.7V - Support for Samsung 2.0A: DP=1.2V DM=1.2V 5. Conversion efficiency: greater than 85% TYPE-C interface 1. Output voltage: - 5V-3A is automatically adjusted according to the fast charging protocol - 9V-3A is automatically adjusted according to the fast charging protocol - 12V-3A is automatically adjusted according to the fast charging protocol - 15V-3A is automatically adjusted according to the fast charging protocol - 20V-3.25A is automatically adjusted according to the fast charging protocol - 13.2V-3.16A is automatically adjusted according to the fast charging protocol 2. Output power: 65W 3. Output protection: Input over-voltage, under-voltage, output over-current, short-circuit protection, over-temperature protection of the whole machine. The output has CV/CC characteristics (the output current is less than the set value, and the output CV mode; CC mode 4. Output charging protocol: - Works with iOS 2.4A - For Samsung 5V2A - DCP-1.5A - PPS/PD3.0/PD2.0 - QC3.0/QC2.0 - AFC - FCP - PE2.0/PE1.1 5. Conversion efficiency: Greater than 94%Specification: Package Weight One Package Weight 3.01kgs / 6.63lb One Package Size 45cm * 45cm * 6cm / 17.72inch * 17.72inch * 2.36inch Qty per Carton 10 Carton Weight 32.00kgs / 70.55lb Carton Size 62cm * 46cm * 45cm / 24.41inch * 18.11inch * 17.72inch Loading Container 20GP: 207 cartons * 10 pcs = 2070 pcs40HQ: 482 cartons * 10 pcs = 4820 pcs

Read more less

1. Image system: LCD2. Original resolution: 1920*10803. Brightness: 200ANSI4. Power consumption: 70W5. Noise: less than 25dB6. Throwing distance: 1.2-4m7. Aspect ratio: 4:3/16:98. Light: LED9. Resolution support: 2K10. Contrast ratio: 1000:111. Power supply: 100-240v 50/60HZ12. Picture size: 40-140 inches13. Speaker: 4ohm 3W14. Lens: F=13015. Operation mode: manual/remote control16. Input terminal: AV/USB*2/HDMI/VGA/audio17. Built-in WIFI, support IOS/Android wired/wireless same screen18. Product size: 246x188x92mm19. Weight: 1.36KGSpecification: General Model T7 Display Types LCD Native Resolution 1920 x 1080 Aspect Ratio 16:9, 4:3 Lamp Types/Number/Life LED Contrast Ratio 1000:1 Power Supply 50 - 60Hz, 110~240V Power Consumption 70W Fan Noise <25dB Speaker 4ohm 3W Interfaces(I/O) 2 x USB Ports 1 x HDMI Port 1 x VGA Port 1 x Audio Port 1 x AV Port Dimensions Size 246x188x92mm Weight 1.36kg Package Include Package Contents 1 x Projector 1 x Remote Control 1 x AV Cable 1 x Manual 1 x Power Cable Package Weight One Package Weight 1.76kgs / 3.88lb One Package Size 25cm * 19cm * 10cm / 9.84inch * 7.48inch * 3.94inch Qty per Carton 10 Carton Weight 19.05kgs / 42.00lb Carton Size 25cm * 38cm * 50cm / 9.84inch * 14.96inch * 19.69inch Loading Container 20GP: 561 cartons * 10 pcs = 5610 pcs40HQ: 1303 cartons * 10 pcs = 13030 pcs

Read more less

1. The remote control is suitable for most models of air conditioners of all brands manufactured by the countries around the world (such as: old-type air conditioners, window air conditioners, split-type air conditioners, direct current frequency conversion air conditioners, etc. ) 2. With the LCD display, the simple operation and the power off memory function, it is the good choice of the damage, loss and replacement of your remote control. 3. With the function of Time on/off, Fast heat/cool, Clock. 4. Offer manually & automatically searching to set up your A/C. 5. With LED light. 6. With LCD backlight. 7. With big button design. 8. New code library, cover more brands and models. 9. Power by 2 x AAA(not included)Specification: Package Weight One Package Weight 0.19kgs / 0.41lb One Package Size 24cm * 12cm * 4cm / 9.45inch * 4.72inch * 1.57inch Qty per Carton 60 Carton Weight 11.40kgs / 25.13lb Carton Size 48cm * 42cm * 38cm / 18.9inch * 16.54inch * 14.96inch Loading Container 20GP: 348 cartons * 60 pcs = 20880 pcs40HQ: 808 cartons * 60 pcs = 48480 pcs

Read more less

Main Features: 1. Working current: DC 3.3V / 13 - 26mA 2. Idle current: DC 3.3V / 10 - 13mA 3. Sleep current: < 80uA 4. Peak current: < 30mA 5. Working frequency: 13.56MHz 6. Supports card: Mifare1 S50, mifare1 S70, mifare Ultralight, mifare Pro, mifare Desfare 7. Application: Various electronic products and DIY projectsSpecification: General Model RFID-RC522 Material Plastic Size 12*8.0*2.0 cm Weight 80 g Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 12cm * 8cm * 2cm / 4.72inch * 3.15inch * 0.79inch Qty per Carton 200 Carton Weight 18.40kgs / 40.56lb Carton Size 48cm * 40cm * 20cm / 18.9inch * 15.75inch * 7.87inch Loading Container 20GP: 694 cartons * 200 pcs = 138800 pcs40HQ: 1612 cartons * 200 pcs = 322400 pcs

Read more less

1. Voltage: DC 4V-30V (overvoltage protection can be set).2. Current: 0-5.5A (overcurrent protection can be set).3. Power: 0-150W4. Electricity: 0-99999mAh5. Energy: 0-999.9mWh6. Time: 0-99 hours7. Countdown: 0-24 hours8. Load resistance: 0-999.99Ohm9. Current / temperature10. Data output voltage11. Supply voltageSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 14.5cm * 9.5cm * 1.5cm / 5.71inch * 3.74inch * 0.59inch Qty per Carton 500 Carton Weight 14.00kgs / 30.86lb Carton Size 90cm * 75cm * 15cm / 35.43inch * 29.53inch * 5.91inch Loading Container 20GP: 263 cartons * 500 pcs = 131500 pcs40HQ: 611 cartons * 500 pcs = 305500 pcs

Read more less