Search results for "electronic modules"

Description1. The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.2. STM8 applications use the USB full speed interface to communicate with STMicroelectronics ST Visual Develop (STVD) or ST Visual Program (STVP) software.3. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.Key Features1. 5V power supplied by a USB connector2. USB 2.0 full speed compatible interface3. USB standard A to mini B cable4. SWIM specific features5. 1.65 V to 5.5 V application voltage supported on SWIM interface6. SWIM low-speed and high-speed modes supported7. SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed8. SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector9. SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector10. JTAG specific features11. 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs12. JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector13. Direct firmware update feature supported (DFU)14. Status LED which blinks during communication with the PC15. Operating temperature 0 to 50 °CApplication ExampleConnecting the PC and STM8/STM32 application board through ST-LINK/V2 to establish hardware connectionConnection with STM8 applicationsThe ST-LINK/V2 should be connected to the STM8 application via the SWIM cable. Two SWIM cables are delivered with the product:- SWIM flat ribbon with a standard ERNI connector at one end and a 4-pin connector at the other end- SWIM flat ribbon ended with a 4-pin, 2.54 mm, low-cost connector on two sidesConnection with STM32 applicationsFor STM32 developments the ST-LINK/V2 must be connected to the application using the standard 20-pin female-female JTAG flat ribbon provided.ST-LINK/V2 StatusThe LED labeled COM on top of the ST-LINK/V2 shows the ST-LINK/V2 status (whatever the connection type). When the:1. LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.2. LED is RED: communication between ST-LINK/V2 and the PC is established (end of enumeration).3. LED is blinking GREEN/RED: data are being exchanged between the target and the PC.4. LED is GREEN: the last communication has been successful.5. LED is ORANGE: ST-LINK/V2 communication with the target has failed.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 9.60kgs / 21.16lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs40HQ: 895 cartons * 96 pcs = 85920 pcs

Read more less

1. CM4 Socket: Suitable for all variants of Compute Module 4 2. Networking: - Dual Gigabit Ethernet RJ45 - M.2 B KEY, for connecting 5G / 4G module - Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication 3. USB: USB 3.2 Gen1 x 2 4. PIN header: Raspberry Pi 40PIN GPIO header 5. Display: MIPI DSI port (15pin 1.0mm FPC connector) 6. Camera: MIPI CSI-2 port x 2 (15pin 1.0mm FPC connector) 7. Video: HDMI x 2, supports 4K 30fps output 8. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 9. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 10. FAN HEADER: 5V/12V (12V by default), allows speed adjustment and measurement 11. Power input: 5V/2.5A 12. Size: 99.6 x 87.0mmSpecification: Package Weight One Package Weight 0.45kgs / 0.98lb One Package Size 16cm * 12cm * 5cm / 6.3inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 15.00kgs / 33.07lb Carton Size 50cm * 32cm * 27cm / 19.69inch * 12.6inch * 10.63inch Loading Container 20GP: 617 cartons * 40 pcs = 24680 pcs40HQ: 1432 cartons * 40 pcs = 57280 pcs

Read more less

1. 5V relay module2. It can be used as a single-chip development board module, and can be used as a home appliance control3. 5V-12V TTL control signal4. Control DC or AC signal, can control 220V AC load5. There is a normally open and a normally closed contact6. Has a power indicator7. There is a control indicator light, which is bright when closing, but not bright when disconnecting8. Transistor drive increases the relay coil, and the control pin is high impedance9. The control pin has a pull-down circuit to prevent the false action of the floating relaySpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 100 pcs = 56600 pcs40HQ: 1314 cartons * 100 pcs = 131400 pcs

Read more less

Industrial RS232/RS485 to Ethernet Converter, Dual Serial Ports, Easy-to-use, High-speed, Low-power, High-stability, UpgradableOverviewThe RS232/485 TO ETH is an industrial RS232/RS485 to Ethernet converter, which allows bi-directional transparent data transmission between RS232/RS485 and RJ45 port Ethernet, even at the same time, it can be configured via webpage.Features1. M4 series 32-bit ARM processor with up to 120MHz frequency, fast speed, stable and reliable2. 10/100M Auto-MDI/MDIX ethernet interface, regardless of cross-over or straight-through cable3. Both RS232 and RS485 interface, allows to work independently at the same time, without interfering each other4. Configurable baudrate (600bps~230.4Kbps), supports five parity check options: None, Odd, Even, Mark, Space5. Multi indicators, for monitoring communicating and working status6. Available working modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)7. Support Modbus, suit for industrial application8. Support Websocket, allows bi-directional transparent data transmission with RS232/RS485 port via webpage directly9. Configurable via webpage, AT commands, serial protocol, and network protocol, provides configuration protocol which can be integrated to your own software10. Support customized heartbeat packets, make sure the connection is truthful, as well as for actively retrieving sensor data11. Support customized registration packets, auto passing the registered packet as identifier after the connection is established, so that different devices can be distinguished12. Support customized webpage, allows user to customize the module configuration page13. Support RFC2217-like protocol, be able to communicate with devices whose serial setting (baudrate, data bit, etc.) may change14. KeepAlive mechanism, detects broken connection, auto re-connecting15. Support time-out reboot (no-data reboot), ensures a long-term stable connection, configurable reboot time16. Support DNS domain name resolution, configurable DNS server17. Support DHCP, auto-obtained IP or static IP18. Firmware is upgradable via the network19. Restore to factory settings via software and/or hardware20. Comes with default MAC address, which is customizable21. Provided software: module configuration software, TCP/UDP testing tool, VCOM virtual serial port software22. Example code: host computer (socket ), VB, C++, Delphi, Android, iOS, etc.Specifications1. Ethernet:- Connector: 4-pin RJ45- Communication rate: 10/100Mbps- Interface protection: 2KV electromagnetic isolation- Protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client, Websocket- TX cache: 16Kbyte- RX cache: 16Kbyte2. RS485/RS232:- Connector:-- RS485: screw terminal (A+, B-, GND)-- RS232: DB9 male- Data bit: 5bit, 6bit, 7bit, 8bit- Stop bit: 1, 2- Parity bit: None, Odd, Even, Mark, Space- Baudrate: 600bps~230.4Kbps- TX cache: 2Kbyte- RX cache: 2Kbyte- Hardware flow control: RTS/CTS- Interface protection:-- RS485: 2KV ESD protection, lightning-proof, anti-surge, over-current protection-- RS485 pull up/down registers: 2.2KΩ3. Power:- Power supply: 5.0~36.0V (5V recommended)- Operating current: 86.5mA (@5V)- Power consumption: <1W- Interface protection: reverse-proof, ESD protection, anti-surge4. Environment:- Operating temperature: -40~85 degree C- Storage temperature: -40~105 degree C5. Size: 85.70*82.76*25.20mmPackage Contents1.RS232/485 TO ETH x12. 5V power adapter x13. Ethernet cable x14. Male-to-Female serial cable x15. Female-to-Female serial cable x1Specification: Package Weight One Package Weight 0.56kgs / 1.23lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 40 Carton Weight 24.50kgs / 54.01lb Carton Size 50cm * 32cm * 27cm / 19.69inch * 12.6inch * 10.63inch Loading Container 20GP: 617 cartons * 40 pcs = 24680 pcs40HQ: 1432 cartons * 40 pcs = 57280 pcs

Read more less

1. Deserializer: MAXIM (ADI) MAX9296A2. Supported hosts: Raspberry Pi 5, Jetson Orin NX/Nano development kits3. Supported serializer models: MAX9295, MAX96717, MAX96705, etc.4. GMSL input: 2 x GMSL2 (GMSL1 compatible) cameras5. Input interface: 2 x MATE_AX FAKRA Z connectors6. Output interface: 22-pin CSI interface7. Supported GMSL camera models: ISX031, etc.8. Power supply: 5V inputPackage contents:- MAX9296-GMSL-DESER-MODULE x 1- 22-pin FFC cable (about 100mm) x 2- PH2.0 3-pin connector cable x 1- Screw kit x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 14cm * 12cm * 4cm / 5.51inch * 4.72inch * 1.57inch Qty per Carton 72 Carton Weight 6.00kgs / 13.23lb Carton Size 50cm * 38cm * 30cm / 19.69inch * 14.96inch * 11.81inch Loading Container 20GP: 467 cartons * 72 pcs = 33624 pcs40HQ: 1086 cartons * 72 pcs = 78192 pcs

Read more less

Features1. With LCD display, the current mode and parameters are clear at a glance, very clear, simple and practical. 2. Support high and low level trigger, switch control, suitable for most occasions. 3. Wide voltage power supply (6~30V) supports micro USB 5.0V power supply, which is very convenient to use. 4. Support UART data upload and parameter setting. 5. There is a key emergency stop function (STOP key), with reverse connection protection, reverse connection will not burn. 6. Added sleep mode. After enabling, if there is no operation within 5 minutes, the LCD backlight will be automatically turned off; any key will wake up. 7. Different OP, CL, LOP parameters can be set, these parameters are independent of each other and saved separately. 8. All setting parameters are automatically saved after power off.Specification1. Working voltage: 6-30V, support micro USB 5.0V power supply 2. Trigger signal source: high level trigger (3.0V~24V), low level trigger (0.0V~0.2V), switch control (passive switch). 3. Output capability: can control equipment within DC 30v 5A or AC 220v 5A 4. Quiescent current: 15mA Working current: 50mA 5. Working temperature: -40a??85 degrees Celsius 6. With optocoupler isolation, enhance anti-interference ability, industrial-grade circuit board, set parameters will be remembered forever after power off 7. Size: 8.0x3.8x1.9cm 8. Weight: about 36gSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 10cm * 2cm / 3.94inch * 3.94inch * 0.79inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 42cm * 32cm / 16.54inch * 16.54inch * 12.6inch Loading Container 20GP: 472 cartons * 200 pcs = 94400 pcs40HQ: 1096 cartons * 200 pcs = 219200 pcs

Read more less

1. Main controller chip: ESP32-P4NRW32 2. RF chip: ESP32-C6H8 3. PSRAM size: 32MB 4. Flash size: 16MB / 32MB5. RF band: 802.11 b/g/n/ax; 2.4GHz Wi-Fi; Bluetooth 5.3 6. Operating voltage: 3.3V 7. Connector type: Pin header, 1mm pitch8. Size: Approx. 25 x 25 x 3.3mmFeatures:1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. Integrated ESP32-C6 chip, supporting 2.4GHz Wi-Fi and 802.11 b/g/n/ax3. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, and 8KB TCM4. Powerful image and audio processing capabilities; image and audio processing interfaces include a JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H.264 video encoder5. 32MB PSRAM stacked within the chip package, with 16MB / 32MB NOR Flash integrated outside the package (optional)6. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection, enabling access permission management (APM) and privilege separationSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 6cm * 6cm * 2cm / 2.36inch * 2.36inch * 0.79inch Qty per Carton 760 Carton Weight 16.20kgs / 35.71lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 760 pcs = 313120 pcs40HQ: 958 cartons * 760 pcs = 728080 pcs

Read more less

1. 5G standard: 3GPP Release 162. Chipset solution: Qualcomm Snapdragon X623. LTE: 1.6Gbps (DL) / 200Mbps (UL)4. HSPA+: 42Mbps (DL) / 5.76Mbps (UL)5. Size: about 10 x 7.9cmFeatures:1. Based on Qualcomm platform, supports 5G NSA and SA networking, with multi-mode and multi-band capabilities2. Integrated dual-frequency positioning across multiple satellite constellations: GPS, GLONASS, BeiDou, Galileo, and QZSS3. Onboard USB 3.1 interface, backward compatible with USB 2.0, enabling high-speed 5G connectivity when connected to Jetson Orin motherboards, computers, or Raspberry Pi4. Onboard M.2 B KEY standard interface with pin configuration switch5. Onboard 4x SMA-to-IPEX antenna conversion ports for simplified antenna installation6. Reserved UART solder pad interface for data transmission with select modules7. Onboard 1 Nano SIM card slot and 1 eSIM slot packaged as QFN-8 (5 x 6), supporting dual-SIM single-standby with AT command switching8. Onboard power switch, reset button, and LED indicator for module power control and status monitoring9. Onboard high-efficiency power circuit capable of delivering up to 3A currentPackage list:- Expansion board x 1- Module x 1- 5G antennas x 4- SMA dust caps x 5- 13cm IPEX1 to IPEX4 cables x 2- 5cm IPEX1 to IPEX4 cables x 2- Screw set x 1- GPS antenna x 1- Dual-ended USB cable x 1- Heat sink x 1- USB 3.0 adapter x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 18cm * 12cm * 4cm / 7.09inch * 4.72inch * 1.57inch Qty per Carton 60 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 60 pcs = 24720 pcs40HQ: 958 cartons * 60 pcs = 57480 pcs

Read more less

1. Features a high-performance Xtensa 32-bit LX7 dual-core processor with a clock speed up to 240MHz2. Supports 2.4GHz Wi-Fi and Bluetooth 5 (LE) with built-in antennas3. Includes 512KB SRAM and 384KB ROM, while stack-integrated with 16MB Flash and 8MB PSRAM4. Features a 4.2-inch full-reflective display with 300 x 400 resolution, offering reflective imaging and eliminating the need for backlighting5. Equipped with a dual-microphone array enabling audio algorithms like noise reduction and echo cancellation, ideal for precise voice recognition and near-field/far-field voice wake-up applications6. Onboard PCF85063 RTC real-time clock and SHTC3 temperature/humidity sensor for precise RTC time management and environmental monitoring7. Integrated 18650 lithium battery holder and RTC backup battery holder (requires rechargeable RTC battery), supporting dual-mode operation: main power supply and independent RTC backup8. Onboard Micro SD card slot for external storage of images or files9. Two customizable side buttons (KEY and BOOT) for developing user-defined functions10. Reserved 2 x 8-row female header (2.54mm pitch) for external expansionSpecifications1. Display panel: fully reflective screen2. Display size: 4.2 inches3. Display resolution: 300 x 4004. Gray scale levels: 25. Communication interface: SPI6. Display method: fully reflective7. Driver IC: ST73058. Display colors: black, white9. Size: about 9.25 x 6.91 cmPackaging list:- ESP32-S3-RLCD-4.2-EN host x 1- Acrylic stand x 2- 8-ohm 2W MX1.25 2PIN speaker (forward) 80mm x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 14cm * 11cm * 4cm / 5.51inch * 4.33inch * 1.57inch Qty per Carton 60 Carton Weight 12.00kgs / 26.46lb Carton Size 44cm * 37cm * 35cm / 17.32inch * 14.57inch * 13.78inch Loading Container 20GP: 468 cartons * 60 pcs = 28080 pcs40HQ: 1086 cartons * 60 pcs = 65160 pcs

Read more less

Overview1. This is a calibrated digital temperature and humidity module with onboard sensor DHT22 (AM2302), which features higher accuracy and wider measuring range than DHT11.2. It can be used for detecting ambient temperature and humidity, through the standard single-wire interface.Specifications1. Temperature- Resolution : 0.1degree C- Accuracy: +/-0.5 degree C- Measuring range: -40 degree C ~ 80 degree C2. Humidity- Resolution: 0.1%RH- Accuracy: +/-2%RH (25degree C)- Measuring range: 0%RH ~ 99.9%RH3. Operating voltage: 3.3V ~ 5.5 V4. Recommended storage condition- Temperature: 10 degree C ~40 degree C- Humidity: 60%RH or belowApplications1. Weather station2. Humidity controller3. Test & detection deviceHow to UseIn the case of working with a MCU:1. VCC: 3.3V ~ 5.5V2. GND: GND3. DOUT: MCU.IOSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs40HQ: 661 cartons * 6240 pcs = 4124640 pcs

Read more less

1. Driver chip: SSD13062. Interface: 3-wire SPI, 4-wire SPI, I2C3. Resolution: 128*644. Display size: 0.96 inch5. Colors: 1/4 yellow section, 3/4 blue section6. Visible angle: >160 degree7. Operating temperature: -30~70 degree C8. Storage temperature: -30~80 degree C9. Operating voltage: 3.3V / 5VSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 2000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 2000 pcs = 554000 pcs40HQ: 644 cartons * 2000 pcs = 1288000 pcs

Read more less

Parameter:1. Power supply voltage: DC 3.7-5V2. Power supply interface: MICRO USB port or 2.54mil pin port3. Length, width and height: 3.3x3.5x1.1cm4. Bluetooth name: BM35. Bluetooth password: 1688 (you need to enter the password to connect and cannot be modified)6. Communication distance: 3-12 meters (different due to environmental obstacles)7. Support Bluetooth version: Support Bluetooth 4.1 or below8. Support mobile phone system: Android, IOS system9. Channel: dual channel10. Audio quality: MP3 lossless decoding11. Built-in power amplifier: none12. External power amplifier: does not limit the small external power amplifier13. PCB thickness: 1.6mm14. Needle spacing: 2.54milFeatures:1. Have a Bluetooth connection password to prevent others from mistakenly connecting and operating.2. Ultra-small size, easy to be embedded in modified products3. Two-channel stereo output, compatible with most power amplifiers, home audio and video, car audio and other equipment in the market4. Standard MICRO MINI USB 5P interface, the same Android phone charging port can be powered by the phone data cable5. Specific DIY embedded refitting pins, which can be plugged in and soldered on your own circuit board for refitting6. High-fidelity output circuit, resistance-capacitance isolation, no noise, good sound quality7. Wireless plug-in U disk, memory card and button settings, pure mobile phone operation connection to play MP38. Equipped with 1 status pin, which can be used by professionals, such as combining single-chip microcomputer and relay switch to realize music desk lamp.Application scenarios:- Car audio modification, home audio modification- Personal DIY Bluetooth audio, electronic project production- Square dance sound, outskirt sound modificationSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 12cm * 10cm * 2cm / 4.72inch * 3.94inch * 0.79inch Qty per Carton 100 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 100 pcs = 62000 pcs40HQ: 1439 cartons * 100 pcs = 143900 pcs

Read more less