Search results for "electronic modules"

1. Model Number: MINI 32 V2.0 2. Main chip: ESP 32 3. Flash Memory Chip: 25Q32 4. Charging IC Chip: TP4054 5. USB to Serial Port Chip: CH340C 6. Package Includes: 1 x TTGO MINI 32 V2.0 ESP32 WiFi Bluetooth Module 2 x Long Female Pins 2 x Normal Pins 4 x Short Female PinsSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 11cm * 11cm * 3cm / 4.33inch * 4.33inch * 1.18inch Qty per Carton 100 Carton Weight 7.50kgs / 16.53lb Carton Size 57cm * 32cm * 24cm / 22.44inch * 12.6inch * 9.45inch Loading Container 20GP: 609 cartons * 100 pcs = 60900 pcs40HQ: 1414 cartons * 100 pcs = 141400 pcs

Read more less

1. Three-in-one electronic clock module, integrating three practical functions: time, thermometer and voltmeter2. Using RX8025T clock chip, the timing accuracy is stable3. The lengthened temperature probe can effectively solve the problem that the temperature affected by the module temperature is not accurate enough4. Power supply voltage: DC5.0-30V5. Temperature function range: -40-120 degrees Celsius, resolution 0.16. Voltmeter function range: DC5-30V (requires pure DC power supply, it is not recommended to use 24V battery, because the voltage may be too high during charging and burn)7. Size: about 4x1.4x1.3cmFunction and usage instructions:1. Adjust time, date, year, voltage error, temperature error cycle display item definition, alternate display interval time2. In the non-setting state, press the left key to enter the time adjustment (note that the colon in the middle is bright):- At this time, the minute bar starts to flash, press the right button to increase, the adjustment range is 00-59, after adjusting, press the left button again, the hour bar starts to flash, press the right button to increase, the adjustment range is 00-23- After adjusting the hour, press the left button again to enter the date adjustment (note that the colon in the middle is off), at this time the date column starts to flash, press the right button to increase, the adjustment range is 1-31, after the date is adjusted, press the left button again key, the month column starts to flash, press the right key to increase, the adjustment range is 1-12, after adjusting the date, press the left key again, the year column starts to flash, press the right key to increase, the adjustment range is 2012-2049- After adjusting the year, press the left key again to enter the error calibration function of the displayed voltage, the unit is 0.1V, a positive number means increase, and a negative number means decrease- Then press the left key again to enter the temperature error calibration setting, press the right key to increase, a positive number means increase, a negative number means decrease, the unit is Celsius- Press the left button again to enter the definition function dd option of the display item in the cycle display state,Press the right button to change the value: (dd:0) time + temperature + voltage, (dd: 1) time + temperature, (dd: 3) time + voltage- Press the left button again to enter the cycle display alternate interval time dF option, press the right button to change the value, the larger the value, the longer the interval- Press the left button again to save all the set values ??and return to the normal display state3. Switch display items: in the non-setting state, press the right key to switch the display items, and the display will switch between the time-date-temperature-voltage alternate displaySpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 6cm * 3cm * 3cm / 2.36inch * 1.18inch * 1.18inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 47cm * 23cm * 23cm / 18.5inch * 9.06inch * 9.06inch Loading Container 20GP: 1072 cartons * 500 pcs = 536000 pcs40HQ: 2489 cartons * 500 pcs = 1244500 pcs

Read more less

1. VCC: 3.3V - 5V power input2. GND: ground wire3. SCL: I2C clock pin4. SDA: I2C data pin5. Communication interface: I2C6. LCD controller: AiP310687. Working voltage: 3.3-5V8. Working temperature: minus 20-70 degrees Celsius9. Display panel: Character LCD10. Display size: 64.5 x 16.0mm11. Characters: 16 x 212. Product size: 87.0 x 32.0 x 13.0mm13. Built-in character LCD panel LCD160214. I2C control interface, only need two signal pins, saving IO resources15. Compatible with 3.3V/5V working voltage16. Comes with online development resources and manuals (Raspberry Pi/Jetson Nano/ESP32/Arduino examples)Specification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 10cm * 4cm * 3cm / 3.94inch * 1.57inch * 1.18inch Qty per Carton 500 Carton Weight 17.00kgs / 37.48lb Carton Size 30cm * 50cm * 56.7cm / 11.81inch * 19.69inch * 22.32inch Loading Container 20GP: 313 cartons * 500 pcs = 156500 pcs40HQ: 727 cartons * 500 pcs = 363500 pcs

Read more less

1. Includes a port expansion board, expanding the connection options of the module2. Provides ample storage space for storing complex firmware, enhancing the functionality of the module3. Suitable for various power supplies, meeting your project requirements4. Operates reliably within normal temperature range, ensuring stable performance in various environments5. A multi-functional board suitable for intelligent electronic projectsSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 7cm * 6cm * 5cm / 2.76inch * 2.36inch * 1.97inch Qty per Carton 216 Carton Weight 6.00kgs / 13.23lb Carton Size 47cm * 38cm * 30cm / 18.5inch * 14.96inch * 11.81inch Loading Container 20GP: 497 cartons * 216 pcs = 107352 pcs40HQ: 1155 cartons * 216 pcs = 249480 pcs

Read more less

Overview1. This is a serial interface E-Ink display module, 4.3 inch, 800×600 resolution, with embedded font libraries, ultra low power consumption.2. You do not have to know anything about the complex underlying details of e-Paper, nor the specific algorithms of displaying graphics, texts, and images. All it needs is the serial interface, and all it matters is your creativity.Features1. Easy to use, displays any contents via one serial interface, including geometric graphics, texts, and images2. Embedded font libraries, supports 32, 48 and 64 dot matrix GBK Chinese fonts and English fonts3. Built-in 128MB NandFlash, allows the font/image data to be stored in either an external TF card or the internal NandFlash4. 4 grey level displaying, 800×600 resolution5. Adjustable serial interface baud rate, 115200 by default when power up6. Powered from 3.3V to 5V, compatible with logic level7. Ultra low power consumption, sleeping current lower than 5mA8. Comes with host computer software, control it directly on your computerApplications1. e book2. Shopping mall POS3. Price label4. Industry instrumentPin Definitions1. VCC: 3.3V~5.5V2. GND: GND3. DOU : Serial data out4. DIN: Serial data in5. WAKE_UP: External wake up6. RST: External resetPackage Contents1.4.3inch e-Paper UART Module x11. XH2.54 6-pin cable ×1Specification: Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 10cm * 14cm * 2cm / 3.94inch * 5.51inch * 0.79inch Qty per Carton 320 Carton Weight 15.00kgs / 33.07lb Carton Size 40cm * 56cm * 40cm / 15.75inch * 22.05inch * 15.75inch Loading Container 20GP: 297 cartons * 320 pcs = 95040 pcs40HQ: 690 cartons * 320 pcs = 220800 pcs

Read more less

1. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)3. Built-in 512KB SRAM and 384KB ROM, stacked with 4MB Flash and 2MB PSRAM or 8MB Flash and 8MB PSRAM4. Features a stamp-hole design and onboard ceramic antenna for easy integration into user-designed baseboards5. Supports flexible clock and individual module power settings for low-power modes in various scenarios6. Integrated USB serial port full-speed controller with 24 GPIOs for flexible peripheral configuration7. Features 4 x SPI, 2 x I2C, 3 x UART, 2 x I2S, and 2 x ADC peripherals8. Supports MicroPython, ESP-IDF, and Arduino9. Compact size, using a half-hole design for easy integration with other motherboards.10. Multiple low-power operating modes meet the power consumption requirements of Internet of Things (IoT), mobile devices, wearable electronic devices, smart home applications, etc.11. Press and hold the BOOT (GPIO0) button before connecting the Type-C cable each time firmware is downloaded.12. When powered by an external power source, input 3.7V~6V power at the half-hole marked with 5V.13. Dimensions: 18x23.5mmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 264 Carton Weight 14.30kgs / 31.53lb Carton Size 50cm * 34cm * 35cm / 19.69inch * 13.39inch * 13.78inch Loading Container 20GP: 448 cartons * 264 pcs = 118272 pcs40HQ: 1040 cartons * 264 pcs = 274560 pcs

Read more less

1. Micro SD card slot2. Support SDIO and SPI interfaces3. 2.54mm pitch pinheadersSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs40HQ: 661 cartons * 6240 pcs = 4124640 pcs

Read more less

1. Applicable to various platforms such as 51/AVR/AVR/ARM2. Using high current relay, AC250V/10A, DC30V/10A3. Independent wiring of the contact part, safe and reliable4. Standard interface, which can be expanded on various development boards5. With fixing screw holes for easy installation6. Size: 138x56x19.3mmSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 100 Carton Weight 21.00kgs / 46.30lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 100 pcs = 56600 pcs40HQ: 1314 cartons * 100 pcs = 131400 pcs

Read more less

OverviewThis is a general OLED display Module, 0.91inch diagonal, 128x32 pixels, with embedded controller, communicating via I2C interface.Features1. 0.91inch small form factor2. 128x32 high resolution3. I2C interface, requires only two signal pins4. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Driver: SSD13062. Interface: I2C3. Display color: White4. Resolution: 128x325. Viewing angle: >160 degree6. Operating voltage: 3.3V / 5V7. Dimension: 36 x 12.5 (mm)Package Contents1. 0.91inch OLED Module x13. PH2.0 4Pin x1Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 2000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 2000 pcs = 554000 pcs40HQ: 644 cartons * 2000 pcs = 1288000 pcs

Read more less

Features1. Adopt PL2303GS new version device 2. Support windows XP/7/8/10/11/... 3. 3x VCCIO power mode via jumper setting: - VCCIO - 5V: 5V output - VCCIO - 3.3V: 3.3V output 4. Open the jumper: powered from target board (1.8V/2.5V/3.3V/5V) 5. 3x LED indicators: TXD, RXD, PWRPackage List1. PL2303 USB UART Board (type A) V2 x1 2. 4-pin custom connector jumper wire x1Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 500 pcs = 283000 pcs40HQ: 1314 cartons * 500 pcs = 657000 pcs

Read more less