Search results for "security motion"
-
850MHz Signal Booster / CDMA Signal Repeater with Yagi Antenna, 850MHz CDMA850mhz
Features1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableInstall Repeater1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar) 2. Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal 3. Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal 6. Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least 7. Indoor and outdoor antenna must be separated by wallWorking1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax) 2. After the signal is accepted by the phone amplifier, the device amplifies it 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna 4. And after that, the amplified signal transmits to the cell phoneTechnique Supporting1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range CDMA 850MHz, Uplink 824-849MHz, Downlink 869-894MHz Gain Uplink 58-62dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 1A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 140mm x 98mm x 20mm Weight 280g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual 1 x Signal Booster Package Weight One Package Weight 1.39kgs / 3.07lb One Package Size 51cm * 25cm * 10cm / 20.08inch * 9.84inch * 3.94inch Qty per Carton 6 Carton Weight 10.00kgs / 22.05lb Carton Size 52cm * 52cm * 32cm / 20.47inch * 20.47inch * 12.6inch Loading Container 20GP: 308 cartons * 6 pcs = 1848 pcs40HQ: 715 cartons * 6 pcs = 4290 pcs
$35.00
-
UHF RFID Long Range 9dBi Integrated Reader with E710 Chip, Style: Add WiFi Communication, Add WiFi Communication
1. Equipped with the Impinj E710 chip, it boasts a peak read rate exceeding 700 tags per second and a long read distance. 2. Built-in high-gain 9dBi antenna provides wide coverage, sensitive card reading, and stable performance. 3. Multiple communication interfaces and a separate cable design for ease of use. 4. Flexible operating mode selection: Active, Passive, and Trigger. 5. Integrated structure with IP67-rated waterproof, dustproof, and lightning protection, making it easily adaptable to diverse outdoor environments. 6. Wide range of applications: Suitable for warehousing and logistics, production line tracking, intelligent asset management, and access control systems. Product Specifications: 1. Model: FI-807 2. Dimensions: 305mm x 305mm x 75mm 3. Operating Frequency: Standard: ISM 902-928MHz and ISM 865-868MHz, optional. 4. Operating Protocols: ISO18000-6C (EPC GEN2), ISO18000-6B 5. Reading distance: 0-18m 6. Output power: 0-33dBm, software-adjustable 7. Operating mode: Wide-spectrum frequency hopping (FHSS) 8. Antenna gain: Built-in circularly polarized antenna, 9dBi gain 9. Communication interfaces: RS232, RS485, RJ45, Wiegand 26/34, one trigger output, one relay output (optional WiFi, 4G, and other communication options, PoE power supply) 10. Operating indicator: Buzzer 11. Power supply: DC+12V (with power adapter), voltage range: 9-16V 12. Operating temperature: -20 degrees Celsius to +80 degrees CelsiusSpecification: Package Weight One Package Weight 3.06kgs / 6.75lb One Package Size 56cm * 56cm * 12cm / 22.05inch * 22.05inch * 4.72inch Qty per Carton 5 Carton Weight 16.00kgs / 35.27lb Carton Size 58cm * 58cm * 36cm / 22.83inch * 22.83inch * 14.17inch Loading Container 20GP: 220 cartons * 5 pcs = 1100 pcs40HQ: 511 cartons * 5 pcs = 2555 pcs
$568.00
-
UHF Middle Range RFID Integrated Reader Identification Distance 0-5m, Style: Add WiFi Communication, Add WiFi Communication
1. Card reading distance 0-5m, power adjustable from 0 to 30dBm. 2. Built-in high-gain 7dBi antenna for wide coverage, sensitive card reading, and stable performance. 3. Multiple communication interfaces and a separate cable design allow for connection to various devices, such as parking sensors and infrared detectors. 4. Flexible operating mode selection: Active, Passive, and Trigger. 5. Integrated structure with IP65-rated waterproof and dustproof protection, easily adaptable to various outdoor environments. 6. Wide range of applications: Suitable for warehousing and logistics, production line tracking, intelligent asset management, and access control systems. Specifications: 1. Model: FI-803C 2. Dimensions: 235mm x 235mm x 58mm 3. Weight: Approximately 1000g 4. Operating frequency: Standard: ISM 902-928MHz and ISM 865-868MHz, optional. 5. Working Protocols: ISO18000-6B, ISO18000-6C (EPC GEN2) 6. Card Reading Distance: 0-5m 7. Card Reading Speed: Software-configured, average single-card reading speed of less than 6ms per 64 bits 8. Card Reading Mode: Timed automatic reading, external trigger-controlled reading, command-based interactive reading, software-configured 9. RF Power: 0 to 30dBm, software-adjustable 10. Operating Mode: Wide-Spectrum Frequency Hopping Span (FHSS) 11. Antenna Gain: Built-in circularly polarized antenna, 7dBi gain 12. Communication Interfaces: RS232, RS485, RJ45, Wiegand 26/34, one trigger output, one relay output, WiFi 13. Card Reading Indicator: Buzzer 14. Power Supply: DC+12V (with power adapter), voltage range 9-16V, powered by POE 15. Operating Temperature: -20 degrees Celsius to +80 degrees CelsiusSpecification: Package Weight One Package Weight 2.03kgs / 4.48lb One Package Size 42cm * 32cm * 12cm / 16.54inch * 12.6inch * 4.72inch Qty per Carton 10 Carton Weight 21.00kgs / 46.30lb Carton Size 45cm * 36cm * 42cm / 17.72inch * 14.17inch * 16.54inch Loading Container 20GP: 391 cartons * 10 pcs = 3910 pcs40HQ: 909 cartons * 10 pcs = 9090 pcs
$246.00
-
800-2500MHz 2 Way Cavity RF Power Splitter/Power Divider, ST-MR02BLC
1) Using micro strip structures, in-band flatness is good, high isolation, insertion loss is small, Standing wave good performance, easy installation, for cellular mobile communications and spread spectrum communications in indoor distribution system. * Electrical Specifications: 1) Type: 2-way Cavity Power Divider 2) Frequency: 800 ~ 2500MHz 3) Insertion loss(distribution ratio)-db:<=3.1DB 4) Isolation (dB): <=27 5) Nominal Impedance: 50 Ohm 6) VSWR: 1:1.2 7) Max. Power(MAX)(W) :50 8) Connector: N female * Mechanical Characteristics: 1) Environment temperature:-25~+55 Degree C 2) Relative humidity: 5~95% 3) Size: 210mm X 58mm x 24mm 4) Weight: 129gSpecification: Package Weight One Package Weight 0.23kgs / 0.51lb One Package Size 24.3cm * 6.5cm * 3.3cm / 9.57inch * 2.56inch * 1.3inch Qty per Carton 40 Carton Weight 9.50kgs / 20.94lb Carton Size 35cm * 28cm * 26cm / 13.78inch * 11.02inch * 10.24inch Loading Container 20GP: 1046 cartons * 40 pcs = 41840 pcs40HQ: 2429 cartons * 40 pcs = 97160 pcs
$7.00 $3.00
-
DCS-LTE 4G Phone Signal Repeater Booster, US Plug, MCP2371AU, MCP2371EU, MCP2371UK, MCP2371US
1. Cover the blind areas of indoor signals, so that there are no blind corners of indoor signals, and solve the inconvenience caused by blind areas. 2. Intelligently enhance the indoor signal to solve the problems of poor mobile phone signal, instability, and poor reception ability 3. Significantly improve the call quality and efficiently increase the signal strength 4. Improve 4G cellular data transmission, solve mobile phone network freezes, and improve mobile 4G Internet loading speed 5. Frequency range: 1800MHz 6. Indoor ceiling receiver: Install it in a place where there is no signal indoors, about 5 meters away from the window, and can be hung on the wall or ceiling 7. Packing list: Host x 1 10m Cable x 1 3m Ceiling Antenna x 1 Outdoor Antenna x 1Specification: Package Weight One Package Weight 2.23kgs / 4.92lb One Package Size 50cm * 22cm * 16cm / 19.69inch * 8.66inch * 6.3inch Qty per Carton 4 Carton Weight 9.50kgs / 20.94lb Carton Size 52cm * 46cm * 34cm / 20.47inch * 18.11inch * 13.39inch Loading Container 20GP: 327 cartons * 4 pcs = 1308 pcs40HQ: 761 cartons * 4 pcs = 3044 pcs
$35.00
-
DCS-LTE 4G Phone Signal Repeater Booster, US Plug(Silver), MCP2368JAU, MCP2368JEU, MCP2368SAU, MCP2368SEU, MCP2368SUK, MCP2368SUS, MCP2368JUK, MCP2368JUS
1. Cover the blind areas of indoor signals, so that there are no blind corners of indoor signals, and solve the inconvenience caused by blind areas. 2. Intelligently enhance the indoor signal to solve the problems of poor mobile phone signal, instability, and poor reception ability 3. Significantly improve the call quality and efficiently increase the signal strength 4. Improve 4G cellular data transmission, solve mobile phone network freezes, and improve mobile 4G Internet loading speed 5. Frequency range: 1800MHz 6. Indoor ceiling receiver: Install it in a place where there is no signal indoors, about 5 meters away from the window, and can be hung on the wall or ceiling 7. Packing list: Host x 1 Small Antenna x 1 Suction Antenna x 1 Power Supply x 1 Specification: Package Weight One Package Weight 0.80kgs / 1.76lb One Package Size 33cm * 18cm * 7cm / 12.99inch * 7.09inch * 2.76inch Qty per Carton 15 Carton Weight 9.00kgs / 19.84lb Carton Size 56cm * 34cm * 37cm / 22.05inch * 13.39inch * 14.57inch Loading Container 20GP: 378 cartons * 15 pcs = 5670 pcs40HQ: 878 cartons * 15 pcs = 13170 pcs
$22.00
-
Industrial USB Isolator Digital Signal & Audio Power Isolator, Industrial USB Isolator
1. Compatible with USB 2.0, providing complete isolation of 12 Mbps data rate, isolation of 2500V voltage, no need for external power supply, no need for driver programs2. ADUM3160 isolation voltage: 2500V3. Power module isolation voltage: 1500V4. Supports USB full-speed 12 Mbps, does not support pure high-speed devices5. Supports USB control transmission, batch transmission, interrupt transmission, synchronous/periodic transmission6. Power supply: taken from the USB port of the computer host7. Driver-free, more convenient to use8. Operating environment: -40°C to 85°C9. Suitable for working environments with strong electricity and strong interference, noise-sensitive fields, USB debugging devices, various industrial control USB devices, other common USB peripherals, such as mice, keyboards, USB sound cards, USB hubs, USB cameras, etcNotes:1. This product has an onboard output power supply from Golden Solar B0505S with a power of 1W. When the working current of your USB device exceeds 180mA, you can use a USB dual-ended cable in addition for power supply2. This product supports full-speed devices, but does not support pure high-speed devices (USB 2.0). Most USB devices are backward compatible and can be usedSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 6cm * 4cm / 3.94inch * 2.36inch * 1.57inch Qty per Carton 215 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 215 pcs = 94170 pcs40HQ: 1018 cartons * 215 pcs = 218870 pcs
$8.00
-
8-Channel RFID Reader / Writer with Impinj E710 Module, Fixed UHF Industrial Long-Range Reader for Warehouse Management, 8-Channel RFID Reader
Features1. Impinj E710 Core: Built with the latest Impinj E710 RFID module for superior sensitivity, fast tag reading, and stable signal transmission. 2. Multi-Channel Design: Supports multiple antenna connections to expand coverage and improve reading efficiency across large areas. 3. Fixed Installation: Ideal for gateways, production lines, and warehouse entrances, providing continuous and reliable long-range RFID reading. 4. High-Speed & Long-Range: Capable of quickly identifying a large number of tags at long distances, ensuring smooth data capture in high-density environments. 5. Industrial-Grade Reliability: Rugged construction with excellent heat dissipation and anti-interference features for 24/7 operation in demanding settings. 6. Wide Application: Perfect for warehouse inventory management, logistics tracking, smart retail, parking systems, and automated production control.Specifications1. Product Model: FF-787 2. Supported Protocols: ISO18000-6C 3. Operating Frequency: 902-928 MHz; 865-868 MHz, Global Bands, Software-Configurable 4. Operating Mode: Wide Spectrum Frequency Hopping Sweep (FHSS) 5. RF Power: 0-33 dBm, Software-Adjustable 6. Card Reading Speed: Software-Configurable, Less than 6 ms per 64-bit card for a single card, Greater than 500 cards/second for multiple tags 7. Card Reading Distance: Greater than 20 meters, Antenna and Tag Dependent 8. Card Reading Indicator: Buzzer and LED 9. Card Reading Modes: Timed automatic reading, external trigger-controlled reading, command-based interactive reading 10. Chip: Impinj E710 11. Operating Temperature: -20 degree C to +80 degree C 12. Data Port: Ethernet RJ45, Serial port: RS232 13. Power supply: DC+12V 3A DC power supply, includes a power adapter, supports 9-16V 14. Dimensions: 195mm x 240mmSpecification: Package Weight One Package Weight 4.03kgs / 8.88lb One Package Size 32cm * 27cm * 13cm / 12.6inch * 10.63inch * 5.12inch Qty per Carton 4 Carton Weight 17.00kgs / 37.48lb Carton Size 55cm * 28cm * 35cm / 21.65inch * 11.02inch * 13.78inch Loading Container 20GP: 494 cartons * 4 pcs = 1976 pcs40HQ: 1148 cartons * 4 pcs = 4592 pcs
$677.00
-
Power Surge Arrester, Arrester
Specification: 1) Joint model: Input A/L B/N AC220V Onput A/L B/N AC220V 2) Material Metal 3) Model PBD-220V 4) Discharge voltage: 475VMax 5) Continual Voltage: 320V 6) Max Discharge Current: 10KA 7) Response time: < 0.5db 8) Working Temperature -60°C+ 190°C 9) Joint wastage: <2dBSpecification: Package Weight One Package Weight 0.01kgs / 0.02lb Qty per Carton 60 Carton Weight 6.80kgs / 14.99lb Carton Size 40cm * 30cm * 30cm / 15.75inch * 11.81inch * 11.81inch Loading Container 20GP: 740 cartons * 60 pcs = 44400 pcs40HQ: 1719 cartons * 60 pcs = 103140 pcs
$7.00
-
TY-GSA-87 Smart Home WIFI Gas Detector, EU Plug, US Plug, UK Plug
1. High stability semiconductor gas sensor2. Smart phone remote monitoring, remote alarm3. Support driving manipulator, voice prompt, ultra-low power consumption design4. Automatic calibration with strong consistency5. Using flame retardant engineering shell material, smoke and oil proof6. High sensitivity and strong anti-interference ability7. Voltage: AC100-240V8. Power: less than or equal to 3W9. Output current: 0.5A10. Operating temperature: 0 to 40 degrees Celsius11. Product list: WiFi gas detector, manual, pin12. Size: about 9 x 9 x 3.8cm13. Weight: about 190gSpecification: Package Weight One Package Weight 0.23kgs / 0.52lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 128 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 25cm / 19.69inch * 19.69inch * 9.84inch Loading Container 20GP: 426 cartons * 128 pcs = 54528 pcs40HQ: 990 cartons * 128 pcs = 126720 pcs
$49.00
-
GSM 900MHz Phone Signal Repeater Booster Kit
1. Material: aluminum alloy shell 2. The wiring is made of single crystal copper, effectively preventing signal loss 3. Gain: 70dbm 4. Working frequency band: GSM 5. Rated voltage: AC 110-240V, DC 12V 6. Product size: 13.5x10.5x2.3cmSpecification: Package Weight One Package Weight 1.80kgs / 3.97lb One Package Size 50cm * 22cm * 15cm / 19.69inch * 8.66inch * 5.91inch Qty per Carton 4 Carton Weight 8.00kgs / 17.64lb Carton Size 51cm * 46cm * 32cm / 20.08inch * 18.11inch * 12.6inch Loading Container 20GP: 355 cartons * 4 pcs = 1420 pcs40HQ: 824 cartons * 4 pcs = 3296 pcs
$37.00
-
4-Channel RFID Reader / Writer with Impinj E710 Module, Fixed UHF Industrial Long-Range Reader for Warehouse Management, 4-Channel RFID Reader
Features1. Impinj E710 Core: Built with the latest Impinj E710 RFID module for superior sensitivity, fast tag reading, and stable signal transmission. 2. Multi-Channel Design: Supports multiple antenna connections to expand coverage and improve reading efficiency across large areas. 3. Fixed Installation: Ideal for gateways, production lines, and warehouse entrances, providing continuous and reliable long-range RFID reading. 4. High-Speed & Long-Range: Capable of quickly identifying a large number of tags at long distances, ensuring smooth data capture in high-density environments. 5. Industrial-Grade Reliability: Rugged construction with excellent heat dissipation and anti-interference features for 24/7 operation in demanding settings. 6. Wide Application: Perfect for warehouse inventory management, logistics tracking, smart retail, parking systems, and automated production control.Specifications1. Product Model: FF-787 2. Supported Protocols: ISO18000-6C 3. Operating Frequency: 902-928 MHz; 865-868 MHz, Global Bands, Software-Configurable 4. Operating Mode: Wide Spectrum Frequency Hopping Sweep (FHSS) 5. RF Power: 0-33 dBm, Software-Adjustable 6. Card Reading Speed: Software-Configurable, Less than 6 ms per 64-bit card for a single card, Greater than 500 cards/second for multiple tags 7. Card Reading Distance: Greater than 20 meters, Antenna and Tag Dependent 8. Card Reading Indicator: Buzzer and LED 9. Card Reading Modes: Timed automatic reading, external trigger-controlled reading, command-based interactive reading 10. Chip: Impinj E710 11. Operating Temperature: -20 degree C to +80 degree C 12. Data Port: Ethernet RJ45, Serial port: RS232 13. Power supply: DC+12V 3A DC power supply, includes a power adapter, supports 9-16V 14. Dimensions: 195mm x 240mmSpecification: Package Weight One Package Weight 4.03kgs / 8.88lb One Package Size 32cm * 27cm * 13cm / 12.6inch * 10.63inch * 5.12inch Qty per Carton 4 Carton Weight 17.00kgs / 37.48lb Carton Size 55cm * 28cm * 35cm / 21.65inch * 11.02inch * 13.78inch Loading Container 20GP: 494 cartons * 4 pcs = 1976 pcs40HQ: 1148 cartons * 4 pcs = 4592 pcs
$557.00