Search results for "security motion"
-
WCDMA 2100MHz Signal Booster / 3G Signal Repeater with Sucker Antenna, 2100MHz Signal Booster
Why to use1. Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save life of somebody. 2. Unfortunately, there are still some places where one can find themselves out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: 1) Parking lots, tunnels 2) Big stores, office buildings 3) Cars, boats etc. 4) House in remote areas etcFeatures1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode. 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableHow to work1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax). 2. After the signal is accepted by the phone amplifier, the device amplifies it. 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna. 4. And after that, the amplified signal transmits to the cell phoneHow to install1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar). 2. Step 2: Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Step 3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signalNotes1. Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least. 2. Indoor and outdoor antenna must be separated by wallTechnique supports1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 53-57dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 2A Power Consumption <5W RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 100mm x 45mm x 18mm Weight 350g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.00kgs / 2.20lb One Package Size 51cm * 18cm * 13cm / 20.08inch * 7.09inch * 5.12inch Qty per Carton 4 Carton Weight 5.20kgs / 11.46lb Carton Size 53cm * 38cm * 28cm / 20.87inch * 14.96inch * 11.02inch Loading Container 20GP: 472 cartons * 4 pcs = 1888 pcs40HQ: 1097 cartons * 4 pcs = 4388 pcs
$42.00
-
UHF RFID Long Range 9dBi Integrated Reader with E710 Chip, Style: Add WiFi Communication, Add WiFi Communication
1. Equipped with the Impinj E710 chip, it boasts a peak read rate exceeding 700 tags per second and a long read distance. 2. Built-in high-gain 9dBi antenna provides wide coverage, sensitive card reading, and stable performance. 3. Multiple communication interfaces and a separate cable design for ease of use. 4. Flexible operating mode selection: Active, Passive, and Trigger. 5. Integrated structure with IP67-rated waterproof, dustproof, and lightning protection, making it easily adaptable to diverse outdoor environments. 6. Wide range of applications: Suitable for warehousing and logistics, production line tracking, intelligent asset management, and access control systems. Product Specifications: 1. Model: FI-807 2. Dimensions: 305mm x 305mm x 75mm 3. Operating Frequency: Standard: ISM 902-928MHz and ISM 865-868MHz, optional. 4. Operating Protocols: ISO18000-6C (EPC GEN2), ISO18000-6B 5. Reading distance: 0-18m 6. Output power: 0-33dBm, software-adjustable 7. Operating mode: Wide-spectrum frequency hopping (FHSS) 8. Antenna gain: Built-in circularly polarized antenna, 9dBi gain 9. Communication interfaces: RS232, RS485, RJ45, Wiegand 26/34, one trigger output, one relay output (optional WiFi, 4G, and other communication options, PoE power supply) 10. Operating indicator: Buzzer 11. Power supply: DC+12V (with power adapter), voltage range: 9-16V 12. Operating temperature: -20 degrees Celsius to +80 degrees CelsiusSpecification: Package Weight One Package Weight 3.06kgs / 6.75lb One Package Size 56cm * 56cm * 12cm / 22.05inch * 22.05inch * 4.72inch Qty per Carton 5 Carton Weight 16.00kgs / 35.27lb Carton Size 58cm * 58cm * 36cm / 22.83inch * 22.83inch * 14.17inch Loading Container 20GP: 220 cartons * 5 pcs = 1100 pcs40HQ: 511 cartons * 5 pcs = 2555 pcs
$568.00
-
ZDY-1 Knitted Sterling Silver Fiber Silver Ion Soft Anti-radiation Fabric Antibacterial Mask Stretch Fabric, Size: 1 Square Meter, 1 Square Meter
1. Silver fiber anti-radiation upgrade fabric2. Encrypted anti-radiation material, high density, small gap, high shielding rate, containing silver ions3. Anti-mobile phone radiation, anti-computer radiation, anti-electrical equipment radiation, anti-base station radiation, anti-radio station radiation, shielding signal4. Strong anti-radiation effect, soft and skin-friendly, B type can be fitted next to the body, healthy and environmentally friendly5. Good conductivity and shielding effect6. Silver ion matrix replating technology, the oxygen filter film is recoated on the surface, and the oxygen resistance is stronger7. High silver content, 18.3g silver content per square meter, 27g silver content per meter8. Antibacterial, good skin-friendly feel, good elasticity, universal for all seasons, silky feel9. Scope of application: anti-radiation clothing, anti-radiation curtains, anti-radiation chassis covers, anti-GPS shielding room, anti-radiation masks, anti-radiation wallpaper, anti-radiation blankets, anti-radiation tents10. Shielding effectiveness: 60 decibels11. Shielding frequency band: 10kHz-30GHz, effectively shielding electromagnetic radiation12. Product washing: hand wash gently, do not machine wash, do not rub, do not bleach13. Dyeing and finishing process: knitting14. Function: RFID anti-theft brush, anti-radiation, mobile phone signal shielding, WiFi signal shielding, electromagnetic shielding, luggage lining, mobile phone bag lining, card bag lining, electronic products, flexible circuits, base stations, electronic chassis, mobile communications15. Material: nylon with silver16. Thickness: 0.3mm17. Width: 150cm18. Weight: 90g/square meterSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 26cm * 26cm * 10cm / 10.24inch * 10.24inch * 3.94inch Qty per Carton 144 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 144 pcs = 25488 pcs40HQ: 412 cartons * 144 pcs = 59328 pcs
$65.00
-
RFID 4-Channel UHF Long-Range Reader, Industrial Access Control & Warehouse Management RFID Reader / Writer, Reader
Features1. Four-Channel Design: Supports up to four antenna connections for wider coverage and flexible installation in various environments. (No antennas) 2. Long-Range Reading: Advanced UHF (Ultra High Frequency) technology enables fast and accurate tag reading at long distances, ideal for large warehouses or outdoor gate systems. 3. High Performance: Features high sensitivity and strong anti-interference capabilities for stable operation in complex industrial settings. 4. Multiple Protocol Support: Compatible with standard UHF RFID protocols, ensuring seamless integration with different systems. 5. Durable & Reliable: Built with industrial-grade materials to withstand harsh environments, ensuring long-term, continuous operation. 6. Versatile Applications: Perfect for intelligent access control, logistics tracking, production line management, and automated inventory systems.Specifications1. Product Model: FF-701 2. Chipset: Impinj E710 3. Supported Protocols: ISO18000-6C/6B 4. Operating Frequency: 902-928 MHz; 865*868 MHz, global frequency band, software-configurable 5. Operating Mode: Wide Spectrum Frequency Hopping Sweep (FHSS) 6. RF Power: 0~33dBm, software-adjustable 7. Card Reading Speed: Software-configured, less than 6ms per 64-bit card, 500 cards/second for multiple tags 8. Card Reading Distance: Greater than 20 meters, antenna and tag dependent 9. Card Reading Indicator: Buzzer and LED 10. Card Reading Modes: Timed automatic reading, external trigger-controlled reading, command-based reading 11. Operating Temperature: -20 degree C to +80 degree C 12. Data Interface: Ethernet RJ45, Serial port: RS232 13. Power supply: DC+12V 3A DC power supply, includes a power adapter, supports 9-16V 14. Dimensions: 164 x 204 x 50mm 15. Net weight: 3kgSpecification: Package Weight One Package Weight 4.03kgs / 8.88lb One Package Size 32cm * 27cm * 13cm / 12.6inch * 10.63inch * 5.12inch Qty per Carton 4 Carton Weight 17.00kgs / 37.48lb Carton Size 55cm * 28cm * 35cm / 21.65inch * 11.02inch * 13.78inch Loading Container 20GP: 494 cartons * 4 pcs = 1976 pcs40HQ: 1148 cartons * 4 pcs = 4592 pcs
$534.00
-
A002 3 in 1 4G Signal Booster Mobile Phone Signal Amplifier, Full Set
1. Purpose: indoor signal coverage2. Working frequency band:Uplink: 890~915MHz 1710-1785MHz 1920-1990MHZDownlink: 935~960MHz 18051880MHz 2110-2180MHZ3. Gain: 65DB4. In-band fluctuation: less than 3 dB5. Output power: greater than 20 dBm6. Three-order intermodulation: 9K-1GHZ≤ -36/1G12.75GHZ≤ -30 dBm7. Voltage: 110--220V (12V 2A)8. Power: 0.5W9. Impedance: 50Ω10. Cable: indoor 3 meters, outdoor 10 meters11. Connector type: N-K12. Plug specifications: American, British, European, Australian13. Weight: 2.8 kgSpecification: Package Weight One Package Weight 3.08kgs / 6.78lb One Package Size 34cm * 23cm * 25cm / 13.39inch * 9.06inch * 9.84inch Qty per Carton 2 Carton Weight 10.60kgs / 23.37lb Carton Size 36cm * 48cm * 27cm / 14.17inch * 18.9inch * 10.63inch Loading Container 20GP: 571 cartons * 2 pcs = 1142 pcs40HQ: 1326 cartons * 2 pcs = 2652 pcs
$125.00
-
DCS-LTE 4G Phone Signal Repeater Booster, US Plug(Silver), MCP2368JAU, MCP2368JEU, MCP2368SAU, MCP2368SEU, MCP2368SUK, MCP2368SUS, MCP2368JUK, MCP2368JUS
1. Cover the blind areas of indoor signals, so that there are no blind corners of indoor signals, and solve the inconvenience caused by blind areas. 2. Intelligently enhance the indoor signal to solve the problems of poor mobile phone signal, instability, and poor reception ability 3. Significantly improve the call quality and efficiently increase the signal strength 4. Improve 4G cellular data transmission, solve mobile phone network freezes, and improve mobile 4G Internet loading speed 5. Frequency range: 1800MHz 6. Indoor ceiling receiver: Install it in a place where there is no signal indoors, about 5 meters away from the window, and can be hung on the wall or ceiling 7. Packing list: Host x 1 Small Antenna x 1 Suction Antenna x 1 Power Supply x 1 Specification: Package Weight One Package Weight 0.80kgs / 1.76lb One Package Size 33cm * 18cm * 7cm / 12.99inch * 7.09inch * 2.76inch Qty per Carton 15 Carton Weight 9.00kgs / 19.84lb Carton Size 56cm * 34cm * 37cm / 22.05inch * 13.39inch * 14.57inch Loading Container 20GP: 378 cartons * 15 pcs = 5670 pcs40HQ: 878 cartons * 15 pcs = 13170 pcs
$22.00
-
UHF Middle Range RFID Integrated Reader Identification Distance 0-5m, Style: Standard, Standard
1. Card reading distance 0-5m, power adjustable from 0 to 30dBm. 2. Built-in high-gain 7dBi antenna for wide coverage, sensitive card reading, and stable performance. 3. Multiple communication interfaces and a separate cable design allow for connection to various devices, such as parking sensors and infrared detectors. 4. Flexible operating mode selection: Active, Passive, and Trigger. 5. Integrated structure with IP65-rated waterproof and dustproof protection, easily adaptable to various outdoor environments. 6. Wide range of applications: Suitable for warehousing and logistics, production line tracking, intelligent asset management, and access control systems. Specifications: 1. Model: FI-803C 2. Dimensions: 235mm x 235mm x 58mm 3. Weight: Approximately 1000g 4. Operating frequency: Standard: ISM 902-928MHz and ISM 865-868MHz, optional. 5. Working Protocols: ISO18000-6B, ISO18000-6C (EPC GEN2) 6. Card Reading Distance: 0-5m 7. Card Reading Speed: Software-configured, average single-card reading speed of less than 6ms per 64 bits 8. Card Reading Mode: Timed automatic reading, external trigger-controlled reading, command-based interactive reading, software-configured 9. RF Power: 0 to 30dBm, software-adjustable 10. Operating Mode: Wide-Spectrum Frequency Hopping Span (FHSS) 11. Antenna Gain: Built-in circularly polarized antenna, 7dBi gain 12. Communication Interfaces: RS232, RS485, RJ45, Wiegand 26/34, one trigger output, one relay output, WiFi 13. Card Reading Indicator: Buzzer 14. Power Supply: DC+12V (with power adapter), voltage range 9-16V, powered by POE 15. Operating Temperature: -20 degrees Celsius to +80 degrees CelsiusSpecification: Package Weight One Package Weight 2.03kgs / 4.48lb One Package Size 42cm * 32cm * 12cm / 16.54inch * 12.6inch * 4.72inch Qty per Carton 10 Carton Weight 21.00kgs / 46.30lb Carton Size 45cm * 36cm * 42cm / 17.72inch * 14.17inch * 16.54inch Loading Container 20GP: 391 cartons * 10 pcs = 3910 pcs40HQ: 909 cartons * 10 pcs = 9090 pcs
$197.00
-
GSM 900MHz Phone Signal Repeater Booster Kit
1. Material: aluminum alloy shell 2. The wiring is made of single crystal copper, effectively preventing signal loss 3. Gain: 70dbm 4. Working frequency band: GSM 5. Rated voltage: AC 110-240V, DC 12V 6. Product size: 13.5x10.5x2.3cmSpecification: Package Weight One Package Weight 1.80kgs / 3.97lb One Package Size 50cm * 22cm * 15cm / 19.69inch * 8.66inch * 5.91inch Qty per Carton 4 Carton Weight 8.00kgs / 17.64lb Carton Size 51cm * 46cm * 32cm / 20.08inch * 18.11inch * 12.6inch Loading Container 20GP: 355 cartons * 4 pcs = 1420 pcs40HQ: 824 cartons * 4 pcs = 3296 pcs
$37.00
-
DY55A Built-in Lullabies Video Babyphone 5 inch Screen Digital Wireless Baby Monitor Camera, DY55A
1. Crystal Clear 720P Large 5" HD Display2. 5000mAh Capacity for 22 hours lasting in ECO Mode3. Safe and Stable 2.4GHz 900ft Wireless Connection4. Strong Signal Strength5. Audio and Video Monitoring ,Two-way Talking System6. PTZ Mode with Digital 2X 4X Zoom7. 940nm Invisible IR LEDs, night vision up to 5m.8. Built-in lullabies/Temperature Monitoring/Feeding Reminder9. Pair up to 4 camerasSpecification: General Model DY55A Display Screen 5 inch 720P Performance Night Vision, Two Way Audio Network Wireless 2.4GHz Wireless Distance 900ft Night Vision Infrared Distance 5m IR LED 940nm Physical Environment Environment Indoor Battery Capacity 5000mAh Package Include Package Contents 1 x Camera 1 x Power Adapter (US, UK, EU, AU Optional) 1 x baby monitor Package Weight One Package Weight 1.14kgs / 2.52lb One Package Size 19.6cm * 17.4cm * 11.2cm / 7.72inch * 6.85inch * 4.41inch Qty per Carton 20 Carton Weight 23.00kgs / 50.71lb Carton Size 58cm * 37cm * 40cm / 22.83inch * 14.57inch * 15.75inch Loading Container 20GP: 310 cartons * 20 pcs = 6200 pcs40HQ: 721 cartons * 20 pcs = 14420 pcs
$95.00
-
UHF RFID Handheld Portable Tag Bluetooth Reader, UHF RFID Bluetooth Reader
1. Operating Frequency: 902-928MHz or 865-868MHz 2. Operating Protocol: EPC C1G2 3. Operating Time: 10 hours 4. Card Reading Distance: 0-2 meters 5. RF Capacity: -2 to 25dBm 6. Bluetooth Indicator: Flashes when in standby mode, stays on when connected 7. Card Reading Indicator: Buzzer/Indicator, beeps and flashes when a card is read 8. Battery Indicator: 4 LED segments 9. Power Consumption: DC 5V Rechargeable 10. Battery Capacity: 5000mAh 11. Built-in high-performance ceramic antenna, compatible with multiple international and domestic protocol standards. Wide-spectrum frequency hopping mode provides effective anti-interference capabilities 12. UHF smart chip, stable performance, sensitive sensing 13. Fast and stable card reading, compatible with a variety of tags 14. Suitable for vehicle management, asset management, production line management, hotel management, and other applicationsSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 17cm * 11cm * 4cm / 6.69inch * 4.33inch * 1.57inch Qty per Carton 80 Carton Weight 25.00kgs / 55.12lb Carton Size 57cm * 36cm * 34cm / 22.44inch * 14.17inch * 13.39inch Loading Container 20GP: 382 cartons * 80 pcs = 30560 pcs40HQ: 887 cartons * 80 pcs = 70960 pcs
$186.00
-
UHF Middle Range RFID Integrated Reader Identification Distance 0-5m, Style: Add WiFi Communication, Add WiFi Communication
1. Card reading distance 0-5m, power adjustable from 0 to 30dBm. 2. Built-in high-gain 7dBi antenna for wide coverage, sensitive card reading, and stable performance. 3. Multiple communication interfaces and a separate cable design allow for connection to various devices, such as parking sensors and infrared detectors. 4. Flexible operating mode selection: Active, Passive, and Trigger. 5. Integrated structure with IP65-rated waterproof and dustproof protection, easily adaptable to various outdoor environments. 6. Wide range of applications: Suitable for warehousing and logistics, production line tracking, intelligent asset management, and access control systems. Specifications: 1. Model: FI-803C 2. Dimensions: 235mm x 235mm x 58mm 3. Weight: Approximately 1000g 4. Operating frequency: Standard: ISM 902-928MHz and ISM 865-868MHz, optional. 5. Working Protocols: ISO18000-6B, ISO18000-6C (EPC GEN2) 6. Card Reading Distance: 0-5m 7. Card Reading Speed: Software-configured, average single-card reading speed of less than 6ms per 64 bits 8. Card Reading Mode: Timed automatic reading, external trigger-controlled reading, command-based interactive reading, software-configured 9. RF Power: 0 to 30dBm, software-adjustable 10. Operating Mode: Wide-Spectrum Frequency Hopping Span (FHSS) 11. Antenna Gain: Built-in circularly polarized antenna, 7dBi gain 12. Communication Interfaces: RS232, RS485, RJ45, Wiegand 26/34, one trigger output, one relay output, WiFi 13. Card Reading Indicator: Buzzer 14. Power Supply: DC+12V (with power adapter), voltage range 9-16V, powered by POE 15. Operating Temperature: -20 degrees Celsius to +80 degrees CelsiusSpecification: Package Weight One Package Weight 2.03kgs / 4.48lb One Package Size 42cm * 32cm * 12cm / 16.54inch * 12.6inch * 4.72inch Qty per Carton 10 Carton Weight 21.00kgs / 46.30lb Carton Size 45cm * 36cm * 42cm / 17.72inch * 14.17inch * 16.54inch Loading Container 20GP: 391 cartons * 10 pcs = 3910 pcs40HQ: 909 cartons * 10 pcs = 9090 pcs
$246.00
-
8 Channel CCTV BNC Surge Arrester Surge Protector Device (CoaxJK/ V8), CoaxJK/ V8
1. 8 Channel CCTV BNC Lightning Arrester Surge Protector Device. 2. CCTV Lightning Arrester adopt internal standard BNC interface(male to female). 3. Suitable for coaxial communication equipment surge protection, such as cable TV, aatellite TV receive, minitor system, etc. 4. This 8CH Surge Protector can protect the lighting response of coaxial cable or equipment damage caused by other high surge voltage. 5. CCTV Surge Protector is used to protect the indirect thunder influence or other instantaneous over voltage surge. Specifications: 1. Working Voltage: 5V 2. Max Working Voltage: 10V 3. Nominal Discharge Current(8/20us): 5KA 4. Discharge Current(8/20us): 10KA 5. Voltage Limit: 15V 6. Data Transfer Rate: 100Mbps 7. Insertion Loss: 0.2db 8. Response Time: 1nS 9. Interface Type: BNC 10. Protection Method: Line to line, line to ground 11. Working Temperature: -25-/+65 degree C 12. Humidity: ~95% 25-30 degree C 13. Test Standard: IEC61643-21: 2000 14. Cable length: Approx. 400mm 15. Size: Approx.168x80x40mmSpecification: Package Weight One Package Weight 0.64kgs / 1.40lb Qty per Carton 16 Carton Weight 11.30kgs / 24.91lb Carton Size 46cm * 30cm * 30cm / 18.11inch * 11.81inch * 11.81inch Loading Container 20GP: 644 cartons * 16 pcs = 10304 pcs40HQ: 1495 cartons * 16 pcs = 23920 pcs
$41.00