Search results for "electronics"

1. Screen size: 1.1 inches 2. Memory card type: TF card 3. Expansion card: support 4. Interface: USB 2.0 5. Headphone jack: 3.5mm 6. Audio format: MP3 7. Battery capacity: 90mAh 8. Charging time: 40 minutesSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 6.5cm * 5.5cm * 4.5cm / 2.56inch * 2.17inch * 1.77inch Qty per Carton 200 Carton Weight 12.20kgs / 26.90lb Carton Size 47cm * 30cm * 28cm / 18.5inch * 11.81inch * 11.02inch Loading Container 20GP: 675 cartons * 200 pcs = 135000 pcs40HQ: 1568 cartons * 200 pcs = 313600 pcs

Read more less

1. Scope of application: can test 74ch series, osmo series, cd4000 series, hef400 series, 4500 series, operational amplifiers, interface chips, optocouplers, automatic transistor identification, voltage regulator voltage identification2. Integrate more than 1,300 types of chip data models and more than 420 types of transistor data models, covering most common general-purpose devices within 24 pins, which can greatly reduce maintenance workload and improve work efficiency3. Press the Enter key to turn on the machine for the first time and automatically run a self-test. The self-test detects the battery voltage and displays it on the screen after more than two seconds. When the battery voltage is lower than 7v, replace the battery to ensure the measurement accuracy. If If there is no alarm, the measurement work can be started4. Nativead 10 ad, the theoretical resolution of 5v voltage is 0.0048v5. Due to the use of batteries for power supply, it is not suitable for measuring high-power thyristors6. The Zener value must be based on the actual measurement, not just the nominal value7. The default directory for initialization is the search directory8. Different test modes: 5v mode, 3.3v mode, auto mode9. There are seven buttons on the panel, which are respectively used for up, down, left, right and typing keys and hotkeys o, p10. The up and down keys are used to adjust the catalog and change the model, and the left and right keys are used to move the cursor left and right to select the item to be changed11. The input key is used to change the machine and execute the test command12. Use two AA 1.5v batteries (not included), press Enter for more than 2 seconds to turn on the machine, and the current battery voltage will be displayed automatically when the machine is turned on. When the battery power is too low, replace the battery. Too low voltage will affect the reliability of the test results. and automatic shutdown protection13. After 60 seconds without any operation, it will automatically shut down14. Test socket: SOP16 narrow body, SOP20 medium body, SOP24 wide bodyThe device positioning method is as follows:1. Place the chip and optocoupler on the top of the alignment, and the 1-pin ic alignment seat2. The triode on the left, mostly three slots3. The 13 and 14 pins of the ic regulator are placedNote: Transistor display pin sequence from left to right corresponds to 10-foot, 11-foot, 12-foot ic block (not built-in battery or adapter)Specification: Package Weight One Package Weight 0.18kgs / 0.39lb One Package Size 15cm * 10cm * 4cm / 5.91inch * 3.94inch * 1.57inch Qty per Carton 188 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 188 pcs = 33276 pcs40HQ: 412 cartons * 188 pcs = 77456 pcs

Read more less

1. Independent display screen, wireless sensor transmission, make it more convenient for you to check the weighing2. Can set clock mode, display time function3. Kilogram/pound/ounce, 3 units can be switched with one key, easy to deal with conversion problems4. Use function of clearing and tare5. LCD blue backlight display, clear and unobstructed reading6. Cross grain rubber anti-skid pad, suitable for more scenes7. Scope of application: express delivery industry, vegetable and fruit market, etc.8. Scale surface material: metal stainless steel wire drawing process9. Power supply method: use a power plug or 2 AA batteries (the product does not include batteries)10. Product size: 38 x 30 x 3 cm11. Monitor size: 17 x 9 x 1.7 cmSpecification: Package Weight One Package Weight 3.50kgs / 7.72lb One Package Size 45cm * 37cm * 10cm / 17.72inch * 14.57inch * 3.94inch Qty per Carton 9 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 9 pcs = 1593 pcs40HQ: 412 cartons * 9 pcs = 3708 pcs

Read more less

1. This electricity saving box helps you save money! 2. Easily insert into a wall socket and it will save electricity once current flows 3. Effectively saves 30% electricity for your washing machine, fan, TV, speaker and much more household appliances 4. Reduces electrical power loss and prolongs the life of electric equipment 5. Plug and playSpecification: Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 12cm * 7.4cm * 9.8cm / 4.72inch * 2.91inch * 3.86inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 49cm * 47cm * 39cm / 19.29inch * 18.5inch * 15.35inch Loading Container 20GP: 296 cartons * 100 pcs = 29600 pcs40HQ: 689 cartons * 100 pcs = 68900 pcs

Read more less

1. 100% brand new and high quality. 2. Innovative technology that does not require setting up. 3. This remote control is compatible with LED TVs under the brand. 4. With new control inputs, the remote is packed with functions and can be used directly to replace existing controllers. 5. Can be used directly without any setting after batteries installation. 6. It is applicable to the LCD / LED TV HD TV of Konka. 7. Note: We do not recommend purchase: - If you have the old CRT TV - If you have a very new model TV (Internet or APP binding) - If you have the plasma TV, remote control will lose very few functionality.Specification: General Model E-K906 Material ABS Power Supply 2*1.5V AAA batteries (not included) Size 19.5**4.8*2.1cm Weight 70g Package Weight One Package Weight 0.13kgs / 0.28lb One Package Size 26cm * 8cm * 3cm / 10.24inch * 3.15inch * 1.18inch Qty per Carton 100 Carton Weight 11.50kgs / 25.35lb Carton Size 54cm * 42cm * 32cm / 21.26inch * 16.54inch * 12.6inch Loading Container 20GP: 367 cartons * 100 pcs = 36700 pcs40HQ: 852 cartons * 100 pcs = 85200 pcs

Read more less

1. Shell material: gray ABS flame-retardant plastic shell2. Refrigeration control output delay protection3. Switch the mode between cooling and heating4. Resolution: 0.1, accuracy: ±1 degrees Celsius5. Measuring and controlling temperature range: -50～+110 degrees Celsius6. After turning off the power, all parameter settings can be saved7. Control the temperature by setting the temperature setting value and the difference value8. Alarm when the temperature exceeds the temperature limit or the sensor is wrong9. Sensor h type: imported NTC sensor, cable length 1 meter10. Please connect the power supply according to the parameters and wiring diagram, and connect the cooling or heating equipment to the output terminal11. Relay output contact capacity: heating: 10A/240VAC, cooling: 10A/240VCA12. The OUT indicator on the panel: flashing indicates the delay of the cooling or heating start, and the constant light indicates the output13. Long press set, 5 seconds to enter the internal parameter setting, press up and down to switch P0...P8, press Rst to confirm and return14. Enter the internal settings to select heating (enter P0 to select H) or cooling (enter P0 to select C) mode according to needs15. It can be used in household freezers, water tanks, refrigerators, industrial chillers, steamers, industrial equipment and other temperature control applications16. Digital tube: display LLL for sensor open circuit; display HHH for exceeding the measuring range and the thermostat will be forced to power off; display --- high temperature alarm17. P0 cooling and heating mode, P1 hysteresis setting, P2 setting range: setting temperature does not exceed this value, P3 setting range: setting temperature not lower than this value, P4 temperature correction, P5 delay Start-up time unit: minutes, P6 high temperature alarm, P7 data lock function, turn on the data lock, P8 restores factory settings18. Product size: 75x34.5x85mm19. Net weight: 120gSpecification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 9cm * 10cm * 5cm / 3.54inch * 3.94inch * 1.97inch Qty per Carton 100 Carton Weight 15.00kgs / 33.07lb Carton Size 52cm * 47cm * 27cm / 20.47inch * 18.5inch * 10.63inch Loading Container 20GP: 404 cartons * 100 pcs = 40400 pcs40HQ: 938 cartons * 100 pcs = 93800 pcs

Read more less

1. 15.4 inch LED 1280x800 resolution 16:10 screen display. 2. Support SD, MS, MMC and so on memory card. 3. Support port: USB 4. AC 100-240V DC12V 1A 5. Boot automatically play: set up the boot automatically play (such as boot automatically play music, pictures, videos, mixed). 6. This electronic photo frame be in 8 languages Chinese, English and so on. 7. Product size: 35*23.2cmSpecification: Package Weight One Package Weight 1.60kgs / 3.53lb One Package Size 39cm * 35cm * 8cm / 15.35inch * 13.78inch * 3.15inch Qty per Carton 10 Carton Weight 16.00kgs / 35.27lb Carton Size 72cm * 41cm * 40cm / 28.35inch * 16.14inch * 15.75inch Loading Container 20GP: 225 cartons * 10 pcs = 2250 pcs40HQ: 524 cartons * 10 pcs = 5240 pcs

Read more less

1. Module parameters:- Power supply voltage: DC4.5-6V (micro USB interface)- Working current: no more than 70mA- Discharge voltage: 1.00V-15.00V Resolution 0.01V- End voltage range: 0.5-11.0V- Support through current: no more than 3.000A resolution 0.001A- Voltage measurement error: less than 1% + 0.02V- Current measurement error: less than 1.2% +-0.002A- Battery capacity range: 9999Ah (1Ah = 1000mAh) 2.2. When the value is large, it is switched by decimal point shift. When it is less than 10Ah, it will be displayed as X.XXX, when it reaches more than 10Ah, it will be displayed as XX.XX, and so on.3. Circuit board size: 50mmX37mm4. Finished product size: 50mmX37mmX17mm (Length X Width X Height, including copper foot height)5. Weight of board and accessories: single board 28g (including copper pillar), two 5W ceramic resistors 9g, 50W resistor about 27g (including wire)6. Note: In order to improve the voltage measurement accuracy, this circuit is specially designed with DC bias. When the terminal is connected nothing, a small voltage will be displayed, which does not affect the actual measurement. 0V) will display 0. If you want to understand the principle, you can check the superposition theorem in electrical engineering.7. How to use:- The battery under test should be fully charged first.- Connect the positive pole of the battery under test to the input positive pole, and the negative pole to the negative pole of the input. Connect the load to the output positive pole and the output negative pole, and connect the tester micro USB with working power (not available for desktop or notebook USB power supply). The battery voltage is displayed at this time.- To start the test directly, just press the “OK” button, the tester can automatically formulate a suitable termination voltage according to the full charge voltage of the battery, and will flash the display 3 times to start the test. Need to manually set the termination voltage, just press the "+" or "-" button to modify in the battery voltage display state, the termination voltage is displayed at the beginning of P, the back represents the voltage value, the resolution is 0.1V, after setting, press "OK" "start testing.- After the test starts, the tester will turn on the electronic switch that controls the load. The test process data display will be displayed between the discharge capacity (Ah), the current discharge current (A) and the battery voltage (V). When the battery voltage reaches the set termination voltage, the tester cuts off the load control switch, the display data stays above the capacity (Ah) and flashes quickly with the corresponding indicator light, the displayed capacity is the actual discharge capacity of the battery, press it "OK" can stop the flashing and let the data display stably. Press the "OK" button again to restore to the state of just powering up and replace the battery to test the next section ...8. Error code and meaning:- Err1: The battery voltage is higher than 15V- Err2: The battery voltage is lower than the set termination voltage- Err3: The battery cannot bear the load discharge current or the line internal resistance is too large- Err4: Current is too large (current exceeds 3.1A)- Err5: Improper use or wiring error has caused the device to burn down and cannot be used (current sampling or control switch MOS burned)9. Note: If the battery is reversed, when the load is turned on and the load current is large (about> 0.8A), the circuit switch tube may be damaged!10. Secondary calibration operation: Press and hold three buttons to power on the tester at the same time, enter the calibration mode, first display the number of calibration records, then enter the formal calibration sampling program to display 0u0A, then short-circuit the input positive and negative poles and press "OK "Button to complete displaying J10u, apply a standard DC voltage of 10.00V between the input positive and negative electrodes, press the" OK "button, and then display J2.0A, apply to the output negative electrode (inflow direction) and input negative electrode (outflow direction) After a constant DC current of 2.0A, press the "OK" button once to complete the calibration. The tester will pre-check the calibration data. If the calibration data is reliable, it will display 4 calibration numbers in turn and then exit. If the pre-audit believes that the data is not reliable, discard the data and exit.Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 500 Carton Weight 23.00kgs / 50.71lb Carton Size 50cm * 50cm * 46cm / 19.69inch * 19.69inch * 18.11inch Loading Container 20GP: 231 cartons * 500 pcs = 115500 pcs40HQ: 538 cartons * 500 pcs = 269000 pcs

Read more less

1. It is an FHD LCD projector, based on the latest LCD display technology with high brightness. You can easily enjoy Netflix, YouTube, Disney+ and other over 7000 apps available in Google Playstore.2. With a native resolution of 1920x1080P and remarkable 700 ANSI Lumens brightness, provides sharp and detailed images and provides you with an immersive home cinema experience.3. Android TV 11 service in-side with official approval of premium apps like Netflix and Prime Video, enjoy endless TV programs, movies, sports events, etc.4. Up to 240 inch large screen and compatible multi devices, adjust keystone correction and zoom function by remote control. Equipped with HDMI/USB/TF card/audio ports, easily connect to PS5/PC/Smartphone/Tablet/TF card, etc.5. Equipped with +/- 50 degree keystone correction, which supports vertical and horizontal image correction, you can easily get the correct image.6. High-quality speakers: designed with a 5W speaker, to create an immersive experience.7. Specification:- Display: LCD- Brightness: 700 ANSI lumens- LCD size: 5 inch- Resolution: 1920x1080P- Contrast ratio: 10000:1- Light life: more than 30000 hrs- Focus: manual- Throw ratio: 1.3- Projecting mode: front, rear, front ceiling, rear ceiling- Keystone correction: vertical(auto)+/-50 degree/horizontal +/-50 degree- Interface: HDMI in x 3, USB2.0 x 1, AV x 1, TF x 1- Speaker: 1 x 5W- Power: AC100-240V- Consumption: 110W1. It is an FHD LCD projector, based on the latest LCD display technology with high brightness. You can easily enjoy Netflix, YouTube, Disney+ and other over 7000 apps available in Google Playstore.2. With a native resolution of 1920x1080P and remarkable 700 ANSI Lumens brightness, provides sharp and detailed images and provides you with an immersive home cinema experience.3. Android TV 11 service in-side with official approval of premium apps like Netflix and Prime Video, enjoy endless TV programs, movies, sports events, etc.4. Up to 240 inch large screen and compatible multi devices, adjust keystone correction and zoom function by remote control. Equipped with HDMI/USB/TF card/audio ports, easily connect to PS5/PC/Smartphone/Tablet/TF card, etc.5. Equipped with +/- 50 degree keystone correction, which supports vertical and horizontal image correction, you can easily get the correct image.6. High-quality speakers: designed with a 5W speaker, to create an immersive experience.7. Specification:- Display: LCD- Brightness: 700 ANSI lumens- LCD size: 5 inch- Resolution: 1920x1080P- Contrast ratio: 10000:1- Light life: more than 30000 hrs- Focus: manual- Throw ratio: 1.3- Projecting mode: front, rear, front ceiling, rear ceiling- Keystone correction: vertical(auto)+/-50 degree/horizontal +/-50 degree- Interface: HDMI in x 3, USB2.0 x 1, AV x 1, TF x 1- Speaker: 1 x 5W- Power: AC100-240V- Consumption: 110WSpecification: General Certificate CE Package Weight One Package Weight 2.65kgs / 5.85lb One Package Size 39cm * 29cm * 15cm / 15.35inch * 11.42inch * 5.91inch Qty per Carton 2 Carton Weight 6.80kgs / 14.99lb Carton Size 44cm * 38cm * 32cm / 17.32inch * 14.96inch * 12.6inch Loading Container 20GP: 498 cartons * 2 pcs = 996 pcs40HQ: 1157 cartons * 2 pcs = 2314 pcs

Read more less

1. Brand new and high quality. 2. Small and lightweight, easy to carry. 3. Display devices use high bright LED digital tube, stunning display effect. 4. With reverse polarity protection, reverse not burned. 5. The voltmeter only two wires, wiring simple and reliable performance. 6. Suitable for measuring DC voltage, measure range: 2.5V ~ 30V. 7. When measuring voltage below 10V, two digits are displayed after the decimal point; when measuring voltage above 10V, one digit is displayed after the decimal point.Specification: General Material Electronic Component Current <30mA Measure Range DC 2.5-30V Input impedance >50Kohm Operating Temperature -10 ~ 65 Degree Celsius Cable Length 15cm Operating Humidity 10 ~ 80% Reading Display 0.36 inch Cutting Size 28mm space, 2.8mm diameter Size 33x15x10 mm Weight 4g Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 15cm * 7cm * 4cm / 5.91inch * 2.76inch * 1.57inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 48cm * 32cm * 32cm / 18.9inch * 12.6inch * 12.6inch Loading Container 20GP: 542 cartons * 200 pcs = 108400 pcs40HQ: 1259 cartons * 200 pcs = 251800 pcs

Read more less

Product Parameters:1. Material: ABS2. Size: 11.2x5.8x2cm3. Weight: about 57g4. Screen: 2.0-inch IPS HD screen5. Pixels: 2 million pixels6. Magnification: 500X7. Image format: JPG8. Video format: AVI9. Support TF card: up to 64G (TF card not included)10. Light source: 8 LEDs11. Focus mode: fixed focus (0mm)12. Battery capacity: 600mAh13. Working time: 1.5H14. Charging time: 1.5H15. Charging interface: Type-CProduct Features:1. Support photo and video recording (press and hold the photo button for 2 seconds to start recording)2. Adopt 2-inch IPS HD screen, with realistic color reproduction and clear observation effect. 2 million pixels meet your daily observation needs and provide better clarity for detailed inspection.3. Built-in 8 LED lights, providing additional lighting when used in dark spaces, easy to use.4. Ergonomic design, comfortable grip, reducing hand fatigue during long-term use, its humanized design ensures a comfortable viewing experience.5. Built-in 600mAh rechargeable battery, the device provides the convenience of long-lasting use, no need to frequently replace batteries, long service life.6. Wide application: Whether reading newspapers, documents, maps, coins, stamps, electronic parts, jewelry, photos, knitwear, plants, prints, or reading coupons, prescription drugs, small print on medicine bottles, its adaptability guarantees optimal performance in a variety of applications.Product Accessories:Microscope x 1Data cable x 1Instruction manual x 1Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 14cm * 9cm * 3cm / 5.51inch * 3.54inch * 1.18inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 36cm * 32cm / 16.54inch * 14.17inch * 12.6inch Loading Container 20GP: 551 cartons * 100 pcs = 55100 pcs40HQ: 1279 cartons * 100 pcs = 127900 pcs

Read more less

1. Basic version: can read U disk, mobile hard disk, TF card, three-in-one AV cable connected to set-top box, DVD, etc.; with HDMI interface; not connected to mobile phones2. Mobile phone with screen version: wirelessly connect to Apple and Android phones, readable U disk, mobile hard disk, TF card, three-in-one AV cable with set-top box, DVD, etc.; with HDMI interface3. Smart Android WiFi version: can read U disk, mobile hard disk, TF card, three-in-one AV cable connected to set-top box, DVD, etc.; WiFi direct connection to the Internet, built-in system can download APP; with HDMI interface4. 16.77 million color engine, restore the color of the video, the picture is smoother and more comfortable5. Stereo sound cavity surround, immersive sound experience6. High-definition 1080P picture resolution, fine picture quality7. High-speed WiFi stable connection does not drop8. Projection distance: 1.2-2m9. High light transmission lens with high refraction coating to reduce eye irritation10. Support side projection, and the position can be placed at will11. Rated power: 60W12. Rated voltage: 110-240V13. Rated current: 0.25A-0.55A14. Resolution support: Full HD (1920 x 1080P) @60Hz15. Projection method: front projection16. Projection drawing size: 30-120 inches17. Throw ratio: 1.2:118. Interface: AV/audio x1; HDMI x1; USB x1; TF x119. Menu language: Chinese, English, Spanish, French, Russian, Polish and other 32 national languages20. Product accessories: projector + remote control + power adapter + three-in-one AV cable + manual + packing box21. Dimensions: 21.5 x 21.1 x 18cm22. Weight: about 1KGSpecification: Package Weight One Package Weight 1.75kgs / 3.86lb One Package Size 15cm * 15cm * 18cm / 5.91inch * 5.91inch * 7.09inch Qty per Carton 14 Carton Weight 30.00kgs / 66.14lb Carton Size 36cm * 36cm * 44cm / 14.17inch * 14.17inch * 17.32inch Loading Container 20GP: 467 cartons * 14 pcs = 6538 pcs40HQ: 1085 cartons * 14 pcs = 15190 pcs

Read more less