Search results for "study electronics"
-
Waveshare ST-LINK/V2 (EN), STM Programmers & Debuggers
Description1. The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.2. STM8 applications use the USB full speed interface to communicate with STMicroelectronics ST Visual Develop (STVD) or ST Visual Program (STVP) software.3. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.Key Features1. 5V power supplied by a USB connector2. USB 2.0 full speed compatible interface3. USB standard A to mini B cable4. SWIM specific features5. 1.65 V to 5.5 V application voltage supported on SWIM interface6. SWIM low-speed and high-speed modes supported7. SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed8. SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector9. SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector10. JTAG specific features11. 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs12. JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector13. Direct firmware update feature supported (DFU)14. Status LED which blinks during communication with the PC15. Operating temperature 0 to 50 °CApplication ExampleConnecting the PC and STM8/STM32 application board through ST-LINK/V2 to establish hardware connectionConnection with STM8 applicationsThe ST-LINK/V2 should be connected to the STM8 application via the SWIM cable. Two SWIM cables are delivered with the product:- SWIM flat ribbon with a standard ERNI connector at one end and a 4-pin connector at the other end- SWIM flat ribbon ended with a 4-pin, 2.54 mm, low-cost connector on two sidesConnection with STM32 applicationsFor STM32 developments the ST-LINK/V2 must be connected to the application using the standard 20-pin female-female JTAG flat ribbon provided.ST-LINK/V2 StatusThe LED labeled COM on top of the ST-LINK/V2 shows the ST-LINK/V2 status (whatever the connection type). When the:1. LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.2. LED is RED: communication between ST-LINK/V2 and the PC is established (end of enumeration).3. LED is blinking GREEN/RED: data are being exchanged between the target and the PC.4. LED is GREEN: the last communication has been successful.5. LED is ORANGE: ST-LINK/V2 communication with the target has failed.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 9.60kgs / 21.16lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs40HQ: 895 cartons * 96 pcs = 85920 pcs
$58.00
-
Waveshare Waveshare 2.9 inch 296x128 Pixel E-Ink Three-color Display Module, 13339
Overview1. This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.2. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.Features1. No backlight, keeps displaying last content for a long time even when power down2. Ultra low power consumption, basically power is only required for refreshing3. SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.4. Onboard voltage translator, compatible with 3.3V/5V MCUs5. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)Specifications1. Operating voltage: 3.3V/5V2. Interface: 3-wire SPI, 4-wire SPI3. Outline dimension: 89.5mm x 38mm4. Display size: 66.89mm x 29.05mm5. Dot pitch: 0.138 x 0.1386. Resolution: 296 x 1287. Display color: Red, black, white8. Grey level: 29. Full refresh time: 15s10. Refresh power: 26.4mW(typ.)11. Standby power: <0.017mW12. Viewing angle: >170 degreePackage Contents1.2.9 inch e-Paper Module (B) x12. PH2.0 20cm 8Pin x1Specification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 89cm * 38cm * 1cm / 35.04inch * 14.96inch * 0.39inch Qty per Carton 40 Carton Weight 0.52kgs / 1.15lb Carton Size 89cm * 38cm * 60cm / 35.04inch * 14.96inch * 23.62inch Loading Container 20GP: 131 cartons * 40 pcs = 5240 pcs40HQ: 305 cartons * 40 pcs = 12200 pcs
$19.00
-
Waveshare Waveshare General 1.5 inch 128x128 16-bit High Color RGB OLED Display Module, 14747
1.5 inch RGB OLED display module, 128x128 pixels, 16-bit high color, SPI interfaceOverviewThis is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.Features1. 128x128 high resolution, 65K colors, clearly displays colorful images2. Support 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor3. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Driver: SSD13512. Interface: 4-wire SPI, 3-wire SPI3. Display color: RGB, 65K colors4. Resolution: 128x1285. Viewing angle: >160 degree6. Operating voltage: 3.3V / 5V7. Dimension: 44.5 x 37 (mm)Package Contents1. 1.5 inch RGB OLED Module x12. PH2.0 7Pin x1Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 2000 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 2000 pcs = 554000 pcs40HQ: 644 cartons * 2000 pcs = 1288000 pcs
$21.00
-
ANENG ANENG Electric Field Emission Electromagnetic Radiation Alarm Detector, GN902
1. Screen display: LCD backlit screen2. Unit switching: μT/mG °C/°F3. Power supply: 1.5V AAA batteries x 24. Electric field radiation: 1V/m-1999V/m5. Magnetic field radiation: 0.01μT/99.99μT6. Reading display: 3-1/2 digit LCD display; test bandwidth: 5Hz-3500MHz7. Sampling time: Approx. 0.4 seconds8. Test mode: average/peak mode9. Automatic shutdown function, more environmentally friendly and energy-saving, longer battery life and durability10. Man-made electromagnetic radiation sources include all electrical appliances. Taking precautions and using household appliances properly can effectively prevent and reduce electromagnetic radiation.11. High-voltage line electromagnetic radiation: detects immediately upon power-on. Hold the instrument and slowly bring the front sensing area close to the electromagnetic radiation source being tested.12. Mainly used for detecting electromagnetic fields, magnetic fields, and temperature in living and working environments.13. Net weight: 53g14. Dimensions: 150.5x32.8x25.5mmSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 18cm * 5cm * 5cm / 7.09inch * 1.97inch * 1.97inch Qty per Carton 84 Carton Weight 17.90kgs / 39.46lb Carton Size 38cm * 37cm * 32cm / 14.96inch * 14.57inch * 12.6inch Loading Container 20GP: 592 cartons * 84 pcs = 49728 pcs40HQ: 1375 cartons * 84 pcs = 115500 pcs
$13.00
-
WAVESHARE Waveshare 2.9 inch 296 x 128 Pixel Touch Black / White e-Paper Module for Raspberry Pi Pico, SPI Interface, 20051
1. 2.9 inch capacitive touch ePaper module, 296??128 resolution 2. 5-points touch support, user-defined wakeup gesture 3. No backlight, keeps displaying last content for a long time even when power down 4. Ultra low power consumption, basically power is only required for refreshing 5. SPI / I2C interface, requires minimal IO pins 6. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 15.40kgs / 33.95lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 200 pcs = 187800 pcs40HQ: 2180 cartons * 200 pcs = 436000 pcs
$26.00
-
WAVESHARE WAVESHARE RP2350 High-Performance Development Board 480 X 480 Resolution, With Touch Screen
1. High-performance, highly integrated microcontroller development board2. Features a compact form factor with an onboard 4-inch high-definition IPS screen, RTC, six-axis sensor (three-axis accelerometer and three-axis gyroscope), and Micro SD card slot, facilitating development and integration into products.3. Utilizes the Raspberry Pi-designed RP2350B microcontroller chip.4. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.5. Built-in 520KB of SRAM and 16MB of on-chip Flash, with a reserved PSRAM interface.6. Uses a Type-C interface, eliminating the need to worry about correct plug orientation.7. Onboard 4-inch LCD screen with 480 x 480 resolution and 65K colors, capable of clearly displaying color images.8. Onboard peripherals include CAN, RS485, I2C interfaces, IMU, RTC, and a Micro SD card slot.9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.10. USB 1.1 host and device support, supporting low-power sleep and hibernation modes.11. Programs can be downloaded via drag-and-drop by recognizing the device as a mass storage device via USB.12. Accurate on-chip clock and timers.13. 12 programmable I/O (PIO) state machines for custom peripheral support.14. More expansion devices can be connected via CAN, RS485, and I2C interfaces.15. Equipped with two types of terminal blocks, allowing for bottom or back wiring, facilitating integration into various applications such as rail mounting or embedded systems.16. Capacitive 5-point touch: Light touch for intuitive operation and multi-point UI interaction; touch functionality can be accessed via I2C signals, supporting 5-point touch.17. Dimensions: 74.66 x 76.54 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 11cm * 11cm * 6cm / 4.33inch * 4.33inch * 2.36inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 46cm * 35cm * 34cm / 18.11inch * 13.78inch * 13.39inch Loading Container 20GP: 487 cartons * 96 pcs = 46752 pcs40HQ: 1130 cartons * 96 pcs = 108480 pcs
$43.00
-
Waveshare ESP32-S3 13.3 Inch Full Color E-Paper Display Onboard Audio Codec Chip Support WiFi & Bluetooth 5, Waveshare 34349
Driver board features:1. Utilizes the ESP32-S3-WROOM-2-N32R16V module, equipped with an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240 MHz2. Integrates 512KB SRAM, 384KB ROM, 16MB PSRAM, and 32MB Flash memory3. Integrates 2.4GHz Wi-Fi and low-power Bluetooth (Bluetooth LE) dual-mode wireless communication, featuring superior radio performance4. Uses the USB Type-C interface, eliminating the need to worry about the orientation of insertion5. Comes with CH343 and CH334 chips, allowing for the satisfaction of USB and UART development needs through a single Type-C interface6. Comes with a 13.3E6 ink display interface, supporting direct connection to a 13.3E6 full-color ink display screen7. Comes with an audio codec chip, supporting voice acquisition and playback, facilitating the implementation of AI voice interaction applications8. Comes with an efficient charge and discharge management chip ETA6098 and an MX1.25 lithium battery interface9. Comes with a Micro SD card slot, allowing for the external connection of a Micro SD card for storing images or filesCharacteristics of the ink display:1. Utilizes E Ink Spectra 6 (E6) technology, featuring high contrast and vivid color display2. Does not require a backlight, and can retain the last screens content even after power loss for a long time3. Has extremely low power consumption, with power usage mainly occurring during refreshesScreen parameters1. Working voltage: 3.3V2. Communication interface: 3-wire SPI, 4-wire SPI3. Size: 284.7 x 208.8 x 0.85 mm4. Display size: 270.4 x 202.8mm5. Pixel pitch: 0.169 x 0.169mm6. Resolution: 1600 x 1200 pixels7. Display color: E6 full color (E Ink Spectra 6)8. Gray level: 29. Global refresh: 19s10. Total refresh power consumption: less than 0.5W11. Sleep power consumption: less than 1mW12. Viewing angle: greater than 170°Packaging list:- ESP32-S3-ePaper-13.3E6 main unit x 1- 13.3-inch e-Paper (E) main unit x 1- e-Paper adapter (B) x 1- 8-ohm 1W speaker x 1- 60-pin FPC flexible cable 10cm (in the same direction) x 1Specification: Package Weight One Package Weight 0.90kgs / 1.99lb One Package Size 35cm * 24cm * 5cm / 13.78inch * 9.45inch * 1.97inch Qty per Carton 12 Carton Weight 12.00kgs / 26.46lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 12 pcs = 5400 pcs40HQ: 1045 cartons * 12 pcs = 12540 pcs
$384.00
-
2 PCS Y01 Student Exam Electronic Watch Backpack Hanging Watch with Keychain, Random Color Delivery, Style: Round Sleek, Round Sleek, Triangle
1. Material: ABS2. Power supply: contains an AG3 button battery3. Display type: LCD digital liquid crystal4. Function: display time (hour, minute), display date (month, day)5. Movement type: electronic6. Waterproof grade: not waterproof7. Applicable scenarios: studying for exams, working and going to work to see the time, etc.8. Features: exquisite and compact, easy to carry, wear-resistant and fall-resistant, comfortable to the touch, with hanging buckle, can be hung on the school bag9. Note: The time is displayed in 12-hour format10. Single weight: about 13g11. Single size: sleek model is about 6.5x2.5x1.2cm, triangle model is about 5.2x2.2cmSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 8cm * 3cm * 2cm / 3.15inch * 1.18inch * 0.79inch Qty per Carton 500 Carton Weight 8.50kgs / 18.74lb Carton Size 42cm * 32cm * 22cm / 16.54inch * 12.6inch * 8.66inch Loading Container 20GP: 901 cartons * 500 pcs = 450500 pcs40HQ: 2093 cartons * 500 pcs = 1046500 pcs
$2.00 - $3.00
-
G1200 7 inch LCD Screen 1200X Portable Electronic Digital Desktop Stand Microscope, AU Plug, Lithium Battery EU Plug, Lithium Battery UK Plug, Lithium Battery US Plug, Lithium Battery AU Plug
1. Pixel: HD 12 megapixel 2. Display screen: 7-inch HD LCD display 3. Magnification: 1-1200X continuous amplification system 4. Distance between object: 10mm to infinity (different distances correspond to different multiples) 5. Built-in lithium battery, Micro USB charging port, AU/EU/UK/US plug are optional. 6. Support 1-128GB Micro SD Card 7. Sixteen language systems: English, Spanish, Russian, Korean, Japanese, Thai, Hebrew, Portugal, German, French, Italy, Turkey, Czech, Poland, Traditional Chinese, Simplified ChineseSpecification: Package Weight One Package Weight 1.23kgs / 2.71lb One Package Size 21cm * 26cm * 8.5cm / 8.27inch * 10.24inch * 3.35inch Qty per Carton 16 Carton Weight 20.40kgs / 44.97lb Carton Size 53cm * 43cm * 36cm / 20.87inch * 16.93inch * 14.17inch Loading Container 20GP: 325 cartons * 16 pcs = 5200 pcs40HQ: 754 cartons * 16 pcs = 12064 pcs
$77.00 - $78.00
-
HM020F 2.0 inch IPS Screen Children Digital Electron Microscope, HM020F
1. Screen: 2.0 HD IPS screen2. CMOS size: 1/6.53. Light source: 7 LED lights4. Focus mode: Manual focus5. Digital zoom: Not supported6. Lens structure: 4P+1R7. Aperture: F4.58. Lens angle of view: 20 degrees9. Interface: Type-C10. Voltage: 5V/1A11. Operating temperature: -10 degrees Celsius to 55 degrees Celsius12. Working humidity: 30%-85%RH13. Power consumption: 200mAh/3.7V14. Battery capacity: 650mAh15. Working time: 2.5h16. Charging time: 1.5h17. Support English, Simplified Chinese, Traditional Chinese, Japanese, Korean, Russian, French, German, Portuguese, Polish, Dutch, Thai, Italian, Spanish18. Small and convenient, easy to carry19. Built-in LED fill light, clear observation indoors and outdoors20. Camera and microscope two-in-one, double the field of viewSpecification: Package Weight One Package Weight 0.14kgs / 0.32lb One Package Size 12cm * 9cm * 5cm / 4.72inch * 3.54inch * 1.97inch Qty per Carton 120 Carton Weight 17.80kgs / 39.24lb Carton Size 50cm * 47cm * 32cm / 19.69inch * 18.5inch * 12.6inch Loading Container 20GP: 354 cartons * 120 pcs = 42480 pcs40HQ: 823 cartons * 120 pcs = 98760 pcs
$25.00
-
WAVESHARE WAVESHARE ESP32-S3 Development Board Equipped With 3.49 Inch IPS Capacitive Touchscreen, Model A With Battery, Model A Without Battery
LCD screen parameters:1. Display panel: LCD2. Display size: 3.49 inches3. Display resolution: 172 x 6404. Display colors: 16.7M5. Display brightness: 350 cd/m26. Contrast ratio: 1200:17. Display Interface: QSPI8. Driver chip: AXS15231B9. Touch interface: I2C10. Touch type: capacitive sensing11. Size: model A about 9.269 x 3.48 x 3.18cm, model B about 9.269 x 3.48 x 2.28cmFeatures:1. Powered by ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, clocked up to 240MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with onboard antennas3. Incorporates 512KB SRAM and 384KB ROM, with 8MB PSRAM stacked and external 16MB Flash4. Onboard 3.49-inch capacitive touch HD IPS display, 172 × 640 resolution, 16.7M colors, clearly displays color images5. Equipped with dual microphone array, enabling audio algorithms like noise reduction and echo cancellation, suitable for precise voice recognition and near-field/far-field voice wake-up applications6. Integrated AXS15231B display driver IC communicating via QSPI and I2C interfaces7. Onboard QMI8658 six-axis IMU (3-axis accelerometer, 3-axis gyroscope) for detecting device orientation and step counting8. On-board PCF85063 RTC chip for convenient implementation of real-time clock functionality9. Two customizable side buttons (PWR, BOOT) for developing user-defined functions10. On-board 3.7V MX1.25 lithium battery charge/discharge interface or 18650 battery holder11. Onboard Micro SD card slot for flexible storage expansion and rapid data transfer, suitable for data logging and media playback, simplifying circuit design12. Reserved 22-pin 2.54mm pitch through-hole pads for connecting external modules or functional expansion, enhancing development flexibilitySpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 90 Carton Weight 28.00kgs / 61.73lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 90 pcs = 37080 pcs40HQ: 958 cartons * 90 pcs = 86220 pcs
$43.00 - $46.00
-
Waveshare Waveshare RP2350A 1.54inch E-Paper Display Development Board 200 × 200 Resolution,, Without Touch Control, With Touch Control
1. The product is a high-performance, highly integrated microcontroller development board. It integrates high-capacity Flash and onboard 1.54inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-life scenarios. Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Lithium Batt recharge and discharge management circuit. Reserved interfaces including USB, UART, I2C, and GPIO for easy functionality expansion and sensor connectivity, providing a flexible and reliable development platform for IoT terminals, electronic tags, portable displays, and other applications.2. Features the RP2350A microcontroller chip developed by Raspberry Pi3. Unique dual-core, dual-architecture design: equipped with dual-core ARM Cortex-M33 and dual-core Hazard3 RISC-V processors; clock speeds up to 150MHz; allows flexible switching between the two architectures4. Built-in 520KB SRAM and 16MB on-chip Flash5. Uses a USB Type-C interface—modern and convenient, eliminating the need to worry about plug orientation6. Onboard 1.54-inch E-Ink display (200 × 200 resolution) featuring high contrast and wide viewing angles7. Supports USB 1.1 Host and Device modes8. Supports low-power sleep and dormant modes9. Recognized as a mass storage device via USB for drag-and-drop file uploading10. Breaks out 7 GPIO pins and USB+/- pins from the RP2350A11. Includes 1x I2C, 1x UART, 2x 12-bit ADC, and 6x controllable PWM channels; features precise on-chip clocks and timers12. Built-in temperature sensor for real-time chip temperature monitoring13. 12 Programmable I/O (PIO) state machines for custom peripheral supportSpecifications:1. Display Panel: E-Ink screen2. Display Size: 1.54 inches3. Resolution: 200 × 2004. Grayscale Levels: 25. Communication Interface: SPI6. Full Refresh Time: 2s7. Display Colors: Black, White8. Partial Refresh Time: 0.3s9. Viewing Angle: Greater than 170-degree10. Display Mode: ReflectiveSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 180 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 37cm * 30cm / 18.5inch * 14.57inch * 11.81inch Loading Container 20GP: 511 cartons * 180 pcs = 91980 pcs40HQ: 1186 cartons * 180 pcs = 213480 pcs
$23.00 - $29.00