Search results for "motorcycle electronics"

Features1. This is a 4G/3G/2G Raspberry Pi communication HAT with GNSS positioning and high speed LTE CAT4 global band connection. By connecting it to PC, Raspberry Pi or Jetson Nano host boards, it is easy to enable 4G high speed networking, cloud platform communication, phone call/SMS, and global GNSS positioning functions. 2. Support dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on 3. GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station 4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication 5. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 9. Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position 10. Onboard audio jack and audio decoder, allows audio operation like making phone call 11. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. LTE Cat-4: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 2. LTE-TDD: B34, B38, B39, B40, B41 3. 3G: UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19 4. 2G: GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz GNSS: 1. Satellite systems: GPS, Beidou, GLONASS, GALILEO, QZSS 2. Receiver type: - 16-channel - C/A Code 3. Sensitivity: - -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou) - Cold starts: -148 dBm 4. Time-To-First-Fix (open air): - Cold starts: Less than 35s - Hot starts: Less than 1s SMS and Audio 1. SMS: - Supported types: MT, MO, CB, Text, PDU - Storage: USIM card and ME (default) 2. Audio feature: - Support echo cancellation - Support noise reductionPackage List1. M.2 TO 4G/5G HAT x 1 2. SIM7600G-H-M.2 x 1 3. Antenna 2pcs x 1 4. IPEX adapter cable 2pcs x 1 5. 2*20PIN pin header x 1 6. Passive GPS antenna x 1 7. Dual plug USB3.0 cable x 1 8. USB3.0 adapter x 1 9. USB2.0 adapter x 1 10. SMA protective cap 2pcs x 1 11. Screws pack x 1Specification: Package Weight One Package Weight 0.24kgs / 0.52lb One Package Size 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch Qty per Carton 40 Carton Weight 9.80kgs / 21.61lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 40 pcs = 22640 pcs40HQ: 1314 cartons * 40 pcs = 52560 pcs

Read more less

1. Material: Aluminum Alloy + DuPont PA2. Suitable for tube diameter: 32-25-22mm3. Suitable for cell phone size: 3.5-6.5 inch4. Mechanical screw fixing, stable and not fall off5. Curved edge clamp design, tightly protect your cell phone6. Compatible with a variety of models: motorcycle / electrical car / bicycle universal7. Two mounting options: mounted on the handlebar; mounted on the rearview mirror seat8. Weight: about 154gSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 14cm * 9cm * 6cm / 5.51inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 9.00kgs / 19.84lb Carton Size 45cm * 29cm * 29cm / 17.72inch * 11.42inch * 11.42inch Loading Container 20GP: 704 cartons * 50 pcs = 35200 pcs40HQ: 1635 cartons * 50 pcs = 81750 pcs

Read more less

1. Aluminum alloy material, strong and durable 2. The four corners are super stable and locked, which is more secure and safe, and the mobile phone will not fall off the rugged stairs 3. Anti-slip gasket, anti-slip film, protect the phone, not scratch the phone 4. 360 degree rotation, horizontal screen and vertical screen as you turn 5. Wide range of use, 4-6.0 inch mobile phones are available 6. Can be installed on motorcycles, off-road vehicles, ATVs and other transportation tools 7. Cable length: 130cm 8. Installation diameter: 2.8-3.5cm 9. Material: aluminum alloy, stainless steel, ABS, rubber 10. Accessories: anti-drop net*1, adhesive*2, non-slip rubber sleeve*2, bracket connecting rod*1, U-shaped bracket*2, non-slip gasket*1, faucet fixing accessories*1, anti-theft screw*2Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 14cm * 10cm * 9cm / 5.51inch * 3.94inch * 3.54inch Qty per Carton 40 Carton Weight 13.46kgs / 29.67lb Carton Size 42cm * 30cm * 45cm / 16.54inch * 11.81inch * 17.72inch Loading Container 20GP: 470 cartons * 40 pcs = 18800 pcs40HQ: 1091 cartons * 40 pcs = 43640 pcs

Read more less

1. Manually adjust the DIY current in one step2. 8 slots are independent, safe and convenient without affecting each other, and the performance is more stable3. VA LCD display, intuitively and clearly displays the real-time battery status information4. Type-c port input supports QC 3A fast charge5. Purpose: capacity test, internal resistance test, storage function, real-time current6. Number of slots: 87. Working temperature: 0-40 degrees Celsius8. Input voltage / current: 5V / 2A, 9V / 2A9. Charging current: 3A x 1 / 2A x 2 / 1A x 4 / 0.5A x 8 / 0.25A x 810. Charging cut-off current: less than or equal to 120mA11. Charging cut-off voltage: 4.2V12. Note: The product only contains the charger, does not contain other accessories such as batteries13. Dimensions: 194x134x34mm14. Weight: 350g15. Applicable battery1.3.6V / 3.7V Li-ion battery: 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 266502.1.2V Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D, SCSpecification: Package Weight One Package Weight 0.57kgs / 1.25lb One Package Size 23cm * 16cm * 5cm / 9.06inch * 6.3inch * 1.97inch Qty per Carton 20 Carton Weight 9.00kgs / 19.84lb Carton Size 47cm * 32cm * 32cm / 18.5inch * 12.6inch * 12.6inch Loading Container 20GP: 554 cartons * 20 pcs = 11080 pcs40HQ: 1286 cartons * 20 pcs = 25720 pcs

Read more less

Description1. The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.2. STM8 applications use the USB full speed interface to communicate with STMicroelectronics ST Visual Develop (STVD) or ST Visual Program (STVP) software.3. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.Key Features1. 5V power supplied by a USB connector2. USB 2.0 full speed compatible interface3. USB standard A to mini B cable4. SWIM specific features5. 1.65 V to 5.5 V application voltage supported on SWIM interface6. SWIM low-speed and high-speed modes supported7. SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed8. SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector9. SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector10. JTAG specific features11. 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs12. JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector13. Direct firmware update feature supported (DFU)14. Status LED which blinks during communication with the PC15. Operating temperature 0 to 50 °CApplication ExampleConnecting the PC and STM8/STM32 application board through ST-LINK/V2 to establish hardware connectionConnection with STM8 applicationsThe ST-LINK/V2 should be connected to the STM8 application via the SWIM cable. Two SWIM cables are delivered with the product:- SWIM flat ribbon with a standard ERNI connector at one end and a 4-pin connector at the other end- SWIM flat ribbon ended with a 4-pin, 2.54 mm, low-cost connector on two sidesConnection with STM32 applicationsFor STM32 developments the ST-LINK/V2 must be connected to the application using the standard 20-pin female-female JTAG flat ribbon provided.ST-LINK/V2 StatusThe LED labeled COM on top of the ST-LINK/V2 shows the ST-LINK/V2 status (whatever the connection type). When the:1. LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.2. LED is RED: communication between ST-LINK/V2 and the PC is established (end of enumeration).3. LED is blinking GREEN/RED: data are being exchanged between the target and the PC.4. LED is GREEN: the last communication has been successful.5. LED is ORANGE: ST-LINK/V2 communication with the target has failed.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 9.60kgs / 21.16lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs40HQ: 895 cartons * 96 pcs = 85920 pcs

Read more less

1. Material: ABS, acrylic2. Voltage: 12V3. Applicable models: 12V models4. Wiring instructions: the black wire connects to the negative pole, the red wire connects to the positive pole, the light is always on, and the yellow wire connects to the positive streamer light.5. ABS plastic shell, high impact strength, heat resistance, flame retardant, good wear resistance6. LED wick, low power, good brightness7. Striped lampshade, made of transparent acrylic material, high light transmittance, striped design, make the turn signal more layered8. The lamp holder is made of rubber, which has good flexibility and prevents damage to the lamp body during collision9. Size: about 11.7x3 cm/piece, the length of the cord is about 25cmSpecification: Package Weight One Package Weight 0.35kgs / 0.78lb One Package Size 15cm * 10cm * 5cm / 5.91inch * 3.94inch * 1.97inch Qty per Carton 84 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 84 pcs = 14868 pcs40HQ: 412 cartons * 84 pcs = 34608 pcs

Read more less

1. Super bright lamp beads, strong light focusing, high brightness, low power consumption, long service life2. Built-in load resistor, brighter, light and shadow without black spots3. Eye-catching reminder after installation to improve driving safety4. High-quality wire core, strong conductivity, corrosion resistance, long service life5. Ultrasonic sealing technology is used, sealing without dead angles, which can be more effectively waterproof6. Voltage: 12V7. Waterproof: IP678. Lumen: 2400lm9. Size: about 6.38 x 4.54 x 3.02cmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 14cm * 10cm * 3cm / 5.51inch * 3.94inch * 1.18inch Qty per Carton 100 Carton Weight 6.00kgs / 13.23lb Carton Size 44cm * 38cm * 32cm / 17.32inch * 14.96inch * 12.6inch Loading Container 20GP: 498 cartons * 100 pcs = 49800 pcs40HQ: 1157 cartons * 100 pcs = 115700 pcs

Read more less

1. The product is a high-performance, highly integrated microcontroller development board. It integrates high-capacity Flash and onboard 1.54inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-life scenarios. Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Lithium Batt recharge and discharge management circuit. Reserved interfaces including USB, UART, I2C, and GPIO for easy functionality expansion and sensor connectivity, providing a flexible and reliable development platform for IoT terminals, electronic tags, portable displays, and other applications.2. Features the RP2350A microcontroller chip developed by Raspberry Pi3. Unique dual-core, dual-architecture design: equipped with dual-core ARM Cortex-M33 and dual-core Hazard3 RISC-V processors; clock speeds up to 150MHz; allows flexible switching between the two architectures4. Built-in 520KB SRAM and 16MB on-chip Flash5. Uses a USB Type-C interface—modern and convenient, eliminating the need to worry about plug orientation6. Onboard 1.54-inch E-Ink display (200 × 200 resolution) featuring high contrast and wide viewing angles7. Supports USB 1.1 Host and Device modes8. Supports low-power sleep and dormant modes9. Recognized as a mass storage device via USB for drag-and-drop file uploading10. Breaks out 7 GPIO pins and USB+/- pins from the RP2350A11. Includes 1x I2C, 1x UART, 2x 12-bit ADC, and 6x controllable PWM channels; features precise on-chip clocks and timers12. Built-in temperature sensor for real-time chip temperature monitoring13. 12 Programmable I/O (PIO) state machines for custom peripheral supportSpecifications:1. Display Panel: E-Ink screen2. Display Size: 1.54 inches3. Resolution: 200 × 2004. Grayscale Levels: 25. Communication Interface: SPI6. Full Refresh Time: 2s7. Display Colors: Black, White8. Partial Refresh Time: 0.3s9. Viewing Angle: Greater than 170-degree10. Display Mode: ReflectiveSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 180 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 37cm * 30cm / 18.5inch * 14.57inch * 11.81inch Loading Container 20GP: 511 cartons * 180 pcs = 91980 pcs40HQ: 1186 cartons * 180 pcs = 213480 pcs

Read more less

1. Long lifespan, Lower power consumption, Energy saving. 2. Easy Installation, Direct Replacement, No Wiring Required. 3. Used for Motorcycle Headlights. 4. Light color: white light 5. Parameters: Voltage: DC9-18V Power: 4.7W (H)2.2W(L) Color temperature: 6000K Lumens: 500LM Lamp beads: COBSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 11cm * 7cm * 5cm / 4.33inch * 2.76inch * 1.97inch Qty per Carton 100 Carton Weight 7.50kgs / 16.53lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 100 pcs = 52200 pcs40HQ: 1212 cartons * 100 pcs = 121200 pcs

Read more less

Features1. Aluminum alloy, solid and stable, shock-proof, stable shooting, no shaking 2. Suitable for intense outdoor activities, such as off-road and fast descent. With a panoramic camera, it can capture all details of bicycles, motorcycles, and get a very clearly picture 3. Applicable size: Can fix bicycle and motorcycle handlebars with 29mm - 32 mm, compatible with most of the bicycle and motorcycles 4. Mount on motorcycle: Super much stable, ever more stable than RAM mounts 5. Suitable for most cameras such as card digital cameras, micro single cameras, SLR cameras, action cameras, etc. 6. This selfie stick is new design, better than the old design, made of aluminium alloy, very stablePackage List1. Selfie stick x 1 2. Invisible base x 1 3. Long screw x 1 4. Short screw x 1 5. Motorcycle handlebar fixture mount x 1 6. Silicone non-slip mat for selfie stick (short) x 1 7. Silicone non-slip pad for handlebar bumper (long) x 1 8. Hex screwdriver x 2Specification: General Compatible with DJI: Osmo Nano, Osmo 360, Osmo Action 5 Pro, Osmo Action 4, Osmo Action 3, Action 2, Osmo Action Gopro: LIT HERO, HERO (2024), HERO13 Black, HERO12 Black, HERO11 Black Mini, HERO11 Black, HERO10 Black, HERO9 Black, HERO8 Black, MAX, HERO7 White, HERO7 Black, HERO7 Silver, NEW HERO, HERO6 Black, HERO5 Black, HERO5 Session, Hero Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO Insta360: X4 Air, GO Ultra, X5, Ace Pro 2, X4, Ace, Ace Pro, X3, ONE RS 1-Inch 360 Edition, Insta360 ONE RS 4K Edition, Insta360 ONE RS 1-INCH EDITION, Insta360 ONE RS 360 Edition, ONE X2 Package Weight One Package Weight 0.66kgs / 1.46lb One Package Size 32cm * 12cm * 6cm / 12.6inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 18.97kgs / 41.82lb Carton Size 50cm * 40cm * 46cm / 19.69inch * 15.75inch * 18.11inch Loading Container 20GP: 289 cartons * 30 pcs = 8670 pcs40HQ: 672 cartons * 30 pcs = 20160 pcs

Read more less

1. Material: ABS + PC2. Applicable position: handlebar3. 360-degree rotating design, one hand can adjust the angle of view, horizontal and vertical screen any rotation4. Thickened EVA protective cushion, four corners of the uniform force clamping, comprehensive protection of the phone, shock-resistant buffer5. Reinforced base, double-fastened locking handlebars6. One-handed operation, push down gently, let go of the automatic closure7. Thickened material, durable and longer service life8. Size: 140 x 95 x 28mm9. Compatible size: 18-28mm10. Weight: 143gSpecification: Package Weight One Package Weight 0.23kgs / 0.52lb One Package Size 15cm * 10cm * 6cm / 5.91inch * 3.94inch * 2.36inch Qty per Carton 60 Carton Weight 15.00kgs / 33.07lb Carton Size 51cm * 38cm * 32cm / 20.08inch * 14.96inch * 12.6inch Loading Container 20GP: 429 cartons * 60 pcs = 25740 pcs40HQ: 998 cartons * 60 pcs = 59880 pcs

Read more less

1. IPS screen, 1024x600 hardware resolution, configurable by software (up to 1920x1080)2. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers3. When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free4. When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free5. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc.6. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.3. 3.5mm audio jack, speaker connector, supports HDMI audio output8. Also supports VGA input (specific cable is required and should be purchased separately)Specification: Package Weight One Package Weight 0.41kgs / 0.89lb One Package Size 22cm * 15cm * 10cm / 8.66inch * 5.91inch * 3.94inch Qty per Carton 16 Carton Weight 5.70kgs / 12.57lb Carton Size 44cm * 30cm * 40cm / 17.32inch * 11.81inch * 15.75inch Loading Container 20GP: 505 cartons * 16 pcs = 8080 pcs40HQ: 1172 cartons * 16 pcs = 18752 pcs

Read more less