Search results for "security sirens"

1. Power + video + audio 3 in 1 passive twisted transceiver. 2. Rising force RCA, tuning fork waterproof DC head, built-in high tension spring BNC. 3. RJ45 connector, HD568B connection method. 4. HD 200 meters, simulation 300 meters. 5. 200 meters power supply, input and output 12V~48V (unregulated chip please select the appropriate power according to the camera voltage). 6. Support HD-CVI/AHD/CVI analog HD cameras and analog ordinary HD cameras. 7. ABS plastic shell, durable to use, small size, delicate design. 8. Power indicator, real-time display of power supply status.Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 10cm * 2cm / 5.91inch * 3.94inch * 0.79inch Qty per Carton 200 Carton Weight 14.40kgs / 31.75lb Carton Size 48cm * 34cm * 32cm / 18.9inch * 13.39inch * 12.6inch Loading Container 20GP: 510 cartons * 200 pcs = 102000 pcs40HQ: 1185 cartons * 200 pcs = 237000 pcs

Read more less

Why to use1. Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save life of somebody. 2. Unfortunately, there are still some places where one can find themselves out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: 1) Parking lots, tunnels 2) Big stores, office buildings 3) Cars, boats etc. 4) House in remote areas etcFeatures1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode. 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableHow to work1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax). 2. After the signal is accepted by the phone amplifier, the device amplifies it. 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna. 4. And after that, the amplified signal transmits to the cell phoneHow to install1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar). 2. Step 2: Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Step 3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signalNotes1. Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least. 2. Indoor and outdoor antenna must be separated by wallTechnique supports1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 53-57dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 2A Power Consumption <5W RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 100mm x 45mm x 18mm Weight 350g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.59kgs / 3.51lb One Package Size 51cm * 18cm * 13cm / 20.08inch * 7.09inch * 5.12inch Qty per Carton 4 Carton Weight 5.75kgs / 12.67lb Carton Size 53cm * 38cm * 28cm / 20.87inch * 14.96inch * 11.02inch Loading Container 20GP: 472 cartons * 4 pcs = 1888 pcs40HQ: 1097 cartons * 4 pcs = 4388 pcs

Read more less

Features1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableInstall Repeater1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar) 2. Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal 3. Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal 6. Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least 7. Indoor and outdoor antenna must be separated by wallWorking1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax) 2. After the signal is accepted by the phone amplifier, the device amplifies it 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna 4. And after that, the amplified signal transmits to the cell phoneTechnique Supporting1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range CDMA 850MHz, Uplink 824-849MHz, Downlink 869-894MHz Gain Uplink 58-62dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 1A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 140mm x 98mm x 20mm Weight 280g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual 1 x Signal Booster Package Weight One Package Weight 0.76kgs / 1.67lb One Package Size 30cm * 12cm * 10cm / 11.81inch * 4.72inch * 3.94inch Qty per Carton 10 Carton Weight 9.80kgs / 21.61lb Carton Size 52cm * 50cm * 32cm / 20.47inch * 19.69inch * 12.6inch Loading Container 20GP: 320 cartons * 10 pcs = 3200 pcs40HQ: 744 cartons * 10 pcs = 7440 pcs

Read more less

About Signal BoosterCell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves - out of coverage. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example: parking lots, tunnels, big stores, office buildings, cars, boats, house in remote areas, etc. Here we will bring you a new kind of LED signal booster. Welcome to buy!Features1. High-gain linear power amplifier. 2. ALC and AGC function technology. 3. Ultra-low noise receive amplifier. 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. 5. Stable and reliable electromagnetic compatibility design. 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. 7. With full-duplex communication mode. 8. It explores an effective and reasonable method to dispel the heat.Installation Steps1. Use your mobile phone to test signal strength outside house or on roof, -70dBm is the basic requirement (full bar). 2. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. 3. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. 4. Mount your indoor antenna with signal repeater. 5. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.Notices1. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. 2. Indoor and outdoor antennas must be separated by wall. 3. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. 4. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. 5. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 6. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area.Specification: General Frequency Range GSM 900MHz, Uplink 890-915MHz, Downlink 935-960MHz Gain Uplink 63-67dB, Downlink 63-67dB Output Power Uplink 15-19dBm, Downlink 15-19dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC:100~240V, 50/60Hz; DC:12V 2A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 198 x 186 x 20mm Weight 1200g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 2.36kgs / 5.21lb One Package Size 52cm * 26cm * 15cm / 20.47inch * 10.24inch * 5.91inch Qty per Carton 2 Carton Weight 5.60kgs / 12.35lb Carton Size 54cm * 28cm * 32cm / 21.26inch * 11.02inch * 12.6inch Loading Container 20GP: 551 cartons * 2 pcs = 1102 pcs40HQ: 1279 cartons * 2 pcs = 2558 pcs

Read more less

🔥 Simplify your multi-camera CCTV setup with fewer cable runs.Need to connect multiple CCTV video feeds and RS485 control signals over a long distance? This 4-channel video multiplexer is designed to combine CCTV video and RS485 control transmission over a single coaxial cable, helping make compatible surveillance installations cleaner and easier to manage.🎯 The Problem → The SolutionProblem: Multi-camera CCTV installations can become complicated when separate cables are needed for video and control signals.Solution: Combine four video channels with RS485 control transmission over one coaxial cable to simplify compatible CCTV installations and reduce cable runs.✅ Key Benefits 4-channel CCTV transmission – Supports transmission of four video channels. Video + RS485 over one coaxial cable – Helps simplify wiring for compatible CCTV systems. Up to 600m transmission – Suitable for long-distance transmission with compatible common video cable. Cleaner installations – Fewer cable runs can help reduce installation complexity. Ideal for CCTV upgrades – A practical option for surveillance extensions and system upgrades. Professional installation solution – Designed for CCTV installers, security projects and DVR systems. 🛍️ Ideal ForCCTV installers, security system upgrades, multi-camera surveillance projects, DVR installations and long-distance camera connections where efficient cabling matters.🔌 Connections Line-in connection to receiver DC 12V power input Power indicator Video input from camera Line-in connection to transmitter Video output to monitor or DVR 📋 Specifications Type: 4-channel video multiplexer transmitter and receiver Signal: CCTV video + RS485 control Transmission distance: Up to 600m with suitable common video cable Power: DC 12V Package weight: 0.96kg / 2.13lb Package size: 33 × 18.5 × 5.5cm ⚠️ Installation Notes Use a stable DC 12V power supply. Connect cables according to the wiring layout before applying power. Ensure all connections are secure. Protect the equipment from water and excessive moisture. Handle and install the equipment carefully. Upgrade your CCTV installation with long-distance video and control transmission while keeping cabling simpler.

Read more less

Features1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableInstall Repeater1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar) 2. Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal 3. Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal 6. Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least 7. Indoor and outdoor antenna must be separated by wallWorking1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax) 2. After the signal is accepted by the phone amplifier, the device amplifies it 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna 4. And after that, the amplified signal transmits to the cell phoneTechnique Supporting1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range CDMA 850MHz, Uplink 824-849MHz, Downlink 869-894MHz Gain Uplink 58-62dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 1A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 140mm x 98mm x 20mm Weight 280g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual 1 x Signal Booster Package Weight One Package Weight 1.39kgs / 3.07lb One Package Size 51cm * 25cm * 10cm / 20.08inch * 9.84inch * 3.94inch Qty per Carton 6 Carton Weight 10.00kgs / 22.05lb Carton Size 52cm * 52cm * 32cm / 20.47inch * 20.47inch * 12.6inch Loading Container 20GP: 308 cartons * 6 pcs = 1848 pcs40HQ: 715 cartons * 6 pcs = 4290 pcs

Read more less

Features1. High-gain linear power amplifier 2. ALC and AGC function technology 3. Ultra-low noise receive amplifier 4. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters 5. Stable and reliable electromagnetic compatibility design 6. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications 7. With full-duplex communication mode 8. Dispel the heat effective reasonable, the structure is pretty, the volume is suitableInstall Repeater1. Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar) 2. Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal 3. Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater 4. Step 4: Mount your indoor antenna with signal repeater 5. Step 5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal 6. Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least 7. Indoor and outdoor antenna must be separated by wallWorking1. The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax) 2. After the signal is accepted by the phone amplifier, the device amplifies it 3. Then this amplified signal goes through the connection cable (coax) to the inside antenna 4. And after that, the amplified signal transmits to the cell phoneTechnique Supporting1. If still weak signal receipt after installation, please check if outdoor antenna point to signal tower correctly or elsewhere has stronger signal and confirm signal strength achieve-70DBM. 2. If still have no signal after installation, please check our device power adapter whether connected perfectly? And connectors connect well. 3. If strength is not steady, please check if outdoor and indoor antenna is too close; please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. 4. Packed the outdoor connector by waterproof glue, otherwise wet reduce the signal cover areaSpecification: General Frequency Range WCDMA 2100MHz, Uplink 1920-1980MHz, Downlink 2110-2170MHz Gain Uplink 53-57dB, Downlink 58-62dB Output Power Uplink 18-22dBm, Downlink 18-22dBm Bandwidth 60m Ripple in Band < 5dB Spurious Emission 9KHz~1GHz (<-36dBm), 1GHz~12.75GHz (<-30dBm) VSWR <3 MTBF >50000h Power Supply AC: 100~240V, 50/ 60Hz; DC: 5V 1A Power Consumption <5W Impedance 50ohm RF Connector N-Female N Work Environment Installs Way Wall Installation Environment Conditions IP40 Working Temperature -10C ~ 55C Working Humidity < 90% Dimensions & Weight Size 140mm x 98mm x 20mm Weight 280g Package Include Package Contents 1 x 12dB Outdoor Antenna 1 x 3dB Indoor Antenna 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual Package Weight One Package Weight 1.24kgs / 2.73lb One Package Size 50cm * 17cm * 14cm / 19.69inch * 6.69inch * 5.51inch Qty per Carton 6 Carton Weight 6.79kgs / 14.96lb Carton Size 52cm * 36cm * 44cm / 20.47inch * 14.17inch * 17.32inch Loading Container 20GP: 323 cartons * 6 pcs = 1938 pcs40HQ: 751 cartons * 6 pcs = 4506 pcs

Read more less

Features1. Impinj E710 Core: Built with the latest Impinj E710 RFID module for superior sensitivity, fast tag reading, and stable signal transmission. 2. Multi-Channel Design: Supports multiple antenna connections to expand coverage and improve reading efficiency across large areas. 3. Fixed Installation: Ideal for gateways, production lines, and warehouse entrances, providing continuous and reliable long-range RFID reading. 4. High-Speed & Long-Range: Capable of quickly identifying a large number of tags at long distances, ensuring smooth data capture in high-density environments. 5. Industrial-Grade Reliability: Rugged construction with excellent heat dissipation and anti-interference features for 24/7 operation in demanding settings. 6. Wide Application: Perfect for warehouse inventory management, logistics tracking, smart retail, parking systems, and automated production control.Specifications1. Product Model: FF-787 2. Supported Protocols: ISO18000-6C 3. Operating Frequency: 902-928 MHz; 865-868 MHz, Global Bands, Software-Configurable 4. Operating Mode: Wide Spectrum Frequency Hopping Sweep (FHSS) 5. RF Power: 0-33 dBm, Software-Adjustable 6. Card Reading Speed: Software-Configurable, Less than 6 ms per 64-bit card for a single card, Greater than 500 cards/second for multiple tags 7. Card Reading Distance: Greater than 20 meters, Antenna and Tag Dependent 8. Card Reading Indicator: Buzzer and LED 9. Card Reading Modes: Timed automatic reading, external trigger-controlled reading, command-based interactive reading 10. Chip: Impinj E710 11. Operating Temperature: -20 degree C to +80 degree C 12. Data Port: Ethernet RJ45, Serial port: RS232 13. Power supply: DC+12V 3A DC power supply, includes a power adapter, supports 9-16V 14. Dimensions: 195mm x 240mmSpecification: Package Weight One Package Weight 4.03kgs / 8.88lb One Package Size 32cm * 27cm * 13cm / 12.6inch * 10.63inch * 5.12inch Qty per Carton 4 Carton Weight 17.00kgs / 37.48lb Carton Size 55cm * 28cm * 35cm / 21.65inch * 11.02inch * 13.78inch Loading Container 20GP: 494 cartons * 4 pcs = 1976 pcs40HQ: 1148 cartons * 4 pcs = 4592 pcs

Read more less

color: Black, material: Metal and plastic, size: 147.5cm * 2cm * 76.2cm1. Flexible width options: The dog gate adjusts from 74–80 cm without extensions. Add the 17.5 cm extension for 91.5–97.5 cm, the 20.3 cm extension for 94–100 cm, or the 30.5 cm extension for 104–111 cm. Combine extensions to fit 111–117.5, 121.5–128, 124.5–130 or 141.5–147.5 cm openings, making it suitable for doorways, hallways and stairways2. Automatic closing & locking: Open the pressure mount stair gate between 30 Degrees and 90 Degrees and it automatically closes and locks behind you, so you can pass through without stopping to pull the gate shut or check the latch. Open it beyond 90 Degrees and it stays fixed open, so you can move back and forth without repeatedly reopening the gate3. One-handed dual swing: The 49 cm walk-through opening and one-hand operation make passing through easier when carrying your baby, groceries or pet. The extra wide stair gate swings in either direction for smoother movement through busy doorways, while either lower lock can be engaged to limit opening to one side4. Easy double-locking: Two upper buttons must be pressed simultaneously to release the pet gate, creating a simple adult-friendly locking action that is difficult for children or pets to operate accidentally. Once released, the latch closes securely after each use, so you do not need to remember to lock the gate behind you5. Tool-free pressure mounting: Set up the no drill stair gate between a doorway, hallway or stairway, then tighten the four adjustment bolts until the latch-side gap is 2-3 mm for smooth operation. Note: A larger gap around the latch before installation is normal. Included screws and adhesive pads can also be used for added supportKeep pets safely out of restricted areas with this pet gate. Designed for hallways, doorways and staircases, its adjustable width fits various openings with ease. The strong metal frame is strong and stable, with a pet-safe, lead-free finish. The puppy door closes and locks automatically when left open between 30 Degrees–90 Degrees, offering extra peace of mind. With accessories included, setup is quick and simple – great for busy homes with curious pets.Specification: Package Weight One Package Size 147.5cm * 2cm * 76.2cm / 58.07inch * 0.79inch * 30inch Qty per Carton 1 Carton Weight 7.20kgs / 15.87lb Carton Size 71cm * 8cm * 84cm / 27.95inch * 3.15inch * 33.07inch Loading Container 20GP: 558 cartons * 1 pcs = 558 pcs40HQ: 1297 cartons * 1 pcs = 1297 pcs

Read more less

1. Material: ABS2. Infrared night vision distance: 5m3. Storage: Support 4-128GTF memory card (not included in this product)4. Battery: 500mAh5. Voltage: 5V6. Signal-to-noise ratio: 48dB7. Working temperature: 0-60 degrees Celsius8. Video recording time: about 190 minutes9. Support WiFi remote, P2P video, video playback, remote viewing, night vision infrared with photosensitivitySpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 12cm * 9cm * 5cm / 4.72inch * 3.54inch * 1.97inch Qty per Carton 120 Carton Weight 11.80kgs / 26.01lb Carton Size 50cm * 47cm * 32cm / 19.69inch * 18.5inch * 12.6inch Loading Container 20GP: 354 cartons * 120 pcs = 42480 pcs40HQ: 823 cartons * 120 pcs = 98760 pcs

Read more less

1. Cover the blind areas of indoor signals, so that there are no blind corners of indoor signals, and solve the inconvenience caused by blind areas. 2. Intelligently enhance the indoor signal to solve the problems of poor mobile phone signal, instability, and poor reception ability 3. Significantly improve the call quality and efficiently increase the signal strength 4. Improve 4G cellular data transmission, solve mobile phone network freezes, and improve mobile 4G Internet loading speed 5. Frequency range: 1800MHz 6. Packing list: Single Host x 1 Power Supply x 1 Manual x 1Specification: Package Weight One Package Weight 0.60kgs / 1.32lb One Package Size 15cm * 11cm * 3cm / 5.91inch * 4.33inch * 1.18inch Qty per Carton 40 Carton Weight 21.00kgs / 46.30lb Carton Size 32cm * 32cm * 24cm / 12.6inch * 12.6inch * 9.45inch Loading Container 20GP: 1085 cartons * 40 pcs = 43400 pcs40HQ: 2518 cartons * 40 pcs = 100720 pcs

Read more less

About The Product1. This micro-repeater kit includes an outdoor and indoor antenna, suitable for mobile phone signal boosting, presenting good amplification effect with no blind spot, which is widely used at home, office, meeting room and other small places. 2. Note: Please ensure your phone frequency the same with our repeater before purchase, for different phone may use different frequency.Features1. GSM900 / WCDMA2100 MHz repeater for mobile phone signal boosting. 2. ALC function, no interference to work station. 3. Low noise, low heat, low power consumption. 4. Alloy material, durable in performance. 5. Perfect design, easy installation. 6. Antenna Gain: 9dB outdoor antenna, 3dB indoor antenna. 7. Indoor antenna cover area: 100-500m2. 8. Frequency range: Uplink 890-915 / 1920-1990MHz, downlink 930-960 / 2110-2180MHz. 9. Gain: Uplink 60dB, downlink 65dB. 10. Output power: Uplink 23dBm, downlink 23dBm. 11. Outdoor Antenna Length: 10m/32.81ft.Specification: General Material Aluminum Alloy Output Power Uplink 23dBm, Downlink 23dBm VSWR <1.5 Power Supply DC12V/2A (AC110-240V) Impedance 50ohm RF Connector N-K Outdoor Antenna Length 10m Cover Area 100-500m2 Seclusion >70dB Dimensions & Weight Size 198*51*22mm Package Include Package Contents 1 x AC Power Supply 1 x Manual 1 x Repeater 1 x Indoor Antenna 1 x Outdoor Antenna Package Weight One Package Weight 1.64kgs / 3.62lb One Package Size 32cm * 25cm * 6cm / 12.6inch * 9.84inch * 2.36inch Qty per Carton 10 Carton Weight 20.00kgs / 44.09lb Carton Size 52cm * 34cm * 32cm / 20.47inch * 13.39inch * 12.6inch Loading Container 20GP: 471 cartons * 10 pcs = 4710 pcs40HQ: 1094 cartons * 10 pcs = 10940 pcs

Read more less