Search results for "testing equipment"

Features:1. Add startup voltage detection function2. Automatic detection of NPN and PNP transistors, N-channel and P-channel MOSFETs, diodes (including dual diodes), thyristors, transistors, resistors and capacitors, etc.3. Automatically test pin elements and display on LCD4. Reference for transistors, MOSFET protection diodes, and amplification factors that can detect the forward bias voltage of the transistors emitter.5. Measure the gate threshold voltage and gate capacitance of the MOSFET6. 1602 liquid crystal display adopts LCD (12864 liquid crystal backlight)7. Fast test speed, effective component test: 2 seconds (except for large capacitors, it takes a long time to measure large capacitance, and the measurement time is one minute is normal)8. One-click operation, boot test, one-click acquisition9. Power consumption shutdown mode: less than 20 nA10. Automatic shutdown function to avoid unnecessary waste, save battery power and improve battery lifeSpecification:1. Two-button operation, automatic shutdown2. Only 20na off current3. Automatic detection of NPN, PNP bipolar transistors, N-channel and P-channel MOS field effect transistors, junction field effect transistors, diodes, diodes, thyristors, low power unidirectional and bidirectional thyristors4. Automatically identify component pin arrangement5. Measurement of Bipolar Transistor Current Amplification Factor and Base-Emitter Threshold Voltage6. Identification of Darlington transistor by base-emitter threshold voltage and large current amplification factor7. Detects bipolar and MOS transistor protection diodes8. Gate MOS FET threshold voltage and gate capacitance measurement9. Two resistances and resistance symbol display can be measured simultaneously. The decimal value shown on the right is 4. The resistance symbols on both sides show the number of pins. So you can measure the potentiometer. If the potentiometer wiper is not shifted to the extreme position, we can distinguish the middle and both ends of the needle10. Resistance measurement resolution is 0.1Ω, can measure 50MΩ11. Can measure 325pf-100mf capacitor with 1pf resolution12. 2uf more capacitors can measure equivalent series resistance at the same time. Two can be displayed as decimal values ??with a resolution of 0.01Ω13. The two diodes can be displayed with the diode symbol in the correct order, and the diode forward voltage can be given.14. The LED was detected as having a higher diode forward voltage. The combination of LEDs is identified as two diodes15. Can measure a single diode reverse capacitance. If the bipolar transistor is connected to the collector or emitter of the base and pins, the collector or emitter junction reverse capacitance can be measured16. Can be connected with single measurement rectifier bridgeSpecification: Package Weight One Package Weight 0.25kgs / 0.54lb One Package Size 18cm * 10cm * 6cm / 7.09inch * 3.94inch * 2.36inch Qty per Carton 50 Carton Weight 14.00kgs / 30.86lb Carton Size 41cm * 37cm * 50cm / 16.14inch * 14.57inch * 19.69inch Loading Container 20GP: 351 cartons * 50 pcs = 17550 pcs40HQ: 816 cartons * 50 pcs = 40800 pcs

Read more less

FNIRSI LCR-P1 Multifunctional Transistor Tester A compact electronic component tester for quickly identifying component parameters, with multiple test functions and a portable design. The LCR-P1 includes a 1.44-inch display, USB-C charging and a replaceable chip holder for flexible testing. Auto Rotation 📸 More Product Photos 📦 Package Details Package weight: 0.16kgPackage size: 14 × 9 × 5cmHost + patch test board + data cable + 3 test hooks + instructions. 🔧 Key Specifications Display: 1.44-inchBattery: 300mAhCharging: Type-C, 5V/1ASize: 71 × 87 × 28mmFunctions: component identification, infrared decoding and dedicated measurement channel. ⭐ MIRA SALES TIP Discharge capacitors and follow the operating instructions before testing. Use the supplied test accessories correctly. ✅ Key Benefits • Multifunction electronic tester• Compact portable design• Type-C charging• 1.44-inch display• Multiple testing accessories included

Read more less

1. Highest real-time sampling rate: 1Msps2. Accuracy: 12Bit3. Sampling buffer depth: 1024 bytes4. Analog band width: 0-200KHz5. Vertical sensitivity: 5mV / Div – 20V / Div (progressive in 1-2-5 way)6. Adjustable vertical displacement with instructions7. Input impedance: 1MΩ8. Maximum input voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)9. Coupling methods include: DC / AC / GND10. Horizontal time base range: 10μs / Div – 50s / Div (progressive in 1-2-5)11. Trigger mode: With automatic, regular and single shot, easy to capture instantaneous waveform12. Trigger on rising or falling edge13. Trigger level position is adjustable, with indication14. Observe waveform before trigger (negative delay)15. Freeze waveform display at any time (HOLD function)16. Signal source: Comes with 1KHz /3.3V square wave test17. The parameters that can be displayed are: frequency, period, pulse width, duty cycle, maximum value, minimum value, average value, peak-to-peak value, and effective value.18. Save / recall waveform, the waveform does not disappear after shutdown19. Packing list:20. 15001K (SMD components are soldered)Specification: Package Weight One Package Weight 0.18kgs / 0.39lb One Package Size 20cm * 13cm * 5cm / 7.87inch * 5.12inch * 1.97inch Qty per Carton 40 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 27cm * 42cm / 20.47inch * 10.63inch * 16.54inch Loading Container 20GP: 452 cartons * 40 pcs = 18080 pcs40HQ: 1049 cartons * 40 pcs = 41960 pcs

Read more less

1. Screen size: 2.8 inches2. Screen material: TFT color screen3. Backlight: adjustable backlight brightness4. Charging power: 5V/1A5. Battery capacity: 3000mAh6. DC voltage: 1.9999V/19.99V/1000V7. Real-time sampling rate: 5MSa/second8. Analog bandwidth: 1MHz9. Input impedance: 1M10. Test voltage range: 80vpp-800vpp11. Vertical sensitivity: 10mV/div-10V/div12. Vertical displacement: adjustable with indicator13. Horizontal time base: 500ns-20s14. Trigger mode: Auto/Normal/Single15. Output waveform: 0-10KHz16. Square duty cycle: 0-100%, square and sawtooth adjustableSpecification: Package Weight One Package Weight 0.62kgs / 1.38lb One Package Size 20cm * 11cm * 9cm / 7.87inch * 4.33inch * 3.54inch Qty per Carton 40 Carton Weight 25.80kgs / 56.88lb Carton Size 57cm * 42cm * 38cm / 22.44inch * 16.54inch * 14.96inch Loading Container 20GP: 293 cartons * 40 pcs = 11720 pcs40HQ: 680 cartons * 40 pcs = 27200 pcs

Read more less

1. Self-calibration function2. Built-in 4400 mAh battery3. Powerful power management capability4. Ultra-low power consumption: less than 3W5. Small and lightweight, compact shape6. One button setting, automatic measurement7. Dual channel, 40/70M optional8. Suspendable bracket, save working space9. Support SCPI communication function, convenient for secondary development10. Oscilloscope + multimeter + signal source multifunction in one11. One package adhesive design, long time use is not easy to fall off12. High-resolution color LCD screen, clear and delicate display13. Type-c charging interface, support charging power, support the upper computer connection14. Oscilloscope function: double sampling mode, high refresh, deep storage, support 7 kinds of automatic measurement, cursor measurement function, save function15. Size: 96x38x198mm16. Weight: about 600gSpecification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 22cm * 13cm * 5cm / 8.66inch * 5.12inch * 1.97inch Qty per Carton 42 Carton Weight 30.00kgs / 66.14lb Carton Size 45cm * 45cm * 17cm / 17.72inch * 17.72inch * 6.69inch Loading Container 20GP: 774 cartons * 42 pcs = 32508 pcs40HQ: 1798 cartons * 42 pcs = 75516 pcs

Read more less

1. Display: 160 * 128 LCD2. Power Supply: 1 * 9V Battery (not included); DC 6.8-12V3. Current: Approx. 30mA4. Resistance Measurement: Max. 50Mohm5. Resistance Resolution: 0.01ohm6. Capacitance Measurement: 25pF ~ 100mF7. Capacitance Resolution: 1pF8. DC Voltage Measurement: Up to 50V9. Screen Size: 3.7 * 3cm / 1.45 * 1.18in10. PCB Size: 7.8 * 6.2cm / 3.1 * 2.44in11. Product Weight: 66g / 2.3oz12. Package Weight: 69-73g / 2.45-2.57oz13. Package List: 1xTransistor TesterSpecification: Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 10cm * 8cm * 4cm / 3.94inch * 3.15inch * 1.57inch Qty per Carton 200 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 33cm * 42cm / 20.47inch * 12.99inch * 16.54inch Loading Container 20GP: 370 cartons * 200 pcs = 74000 pcs40HQ: 858 cartons * 200 pcs = 171600 pcs

Read more less

Oscilloscope function introduction:1. Dual channel 2X10MHz bandwidth, 50MS/s real-time sampling rate2. Measuring voltage: 400V (MAX)3. FPGA+ADC+MCU high-performance hardware architecture, waveform details are captured without loss4. With complete trigger functions (automatic, single, regular)5. Equipped with efficient one-button automatic adjustment, the measured waveform can be displayed without cumbersome adjustments.6. Save waveform screenshots and support exporting pictures to the computer to facilitate secondary waveform analysis.Multimeter function introduction:1. Four-digit integer 9999 count true effective value measurement2. Voltage, current, capacitance, resistance, diode, continuity, zero line identification, temperature3. Measuring voltage: AC750V, DC1000V (MAX)4. Automatic range, intelligent anti-burning5. Data retention, color screen digital displayIntroduction to signal generator functions1. 7 signal waveforms: sine wave, square wave, triangle wave, full wave, half wave, noise wave, DC2. Output frequency: 1Hz-2MHz3. Output amplitude: 0.1-3.3V4. Output duty cycle: 0-1001. Screen: 2.8-inch true color screen2. Resolution: 320 x 2403. Charging: TYPE-C (5V/1A)4. Battery: 3000mAh lithium battery5. Supported functions: oscilloscope, signal generator, digital multimeter6. Standby time: 8 hours7. Language: English, Russian, Portuguese, Japanese, German8. Size: 141.7x93.5x38mm9. Weight: 300g10. The hardware architecture adopts the same ARM + FPGA + high-speed ADC solution as that of desktop computers. It has high cost and is an unusual CPU direct acquisition solution. The trigger system is powerful and has super waveform capture capabilities without losing the waveform details.11. It has complete trigger modes: automatic, single, and normal; equipped with efficient one-button automatic adjustment, which can display the measured signal waveform without cumbersome adjustments.12. Save waveform screenshots with one click. The saved pictures can be viewed on an oscilloscope or exported to a computer to facilitate secondary analysis of the collected signals.13. Intelligent anti-burning has overload protection, and built-in double fuses prevent meter burning and are safer14. 3000mah large-capacity lithium battery, TYPE-C port can be recharged worry-free and labor-saving, and has a long battery life of 8 hours15. The extendable stand can be used and placed for easy reading.16. ABS material + silicone jacket, sturdy and anti-fall, comfortable to the touchEnglish standard:1. 2C23T x 12. 10x probe x 13. Red and black alligator clip probe x 14. Multimeter lead x 15. Charging cable x 16. Packing box x 17. Instructions x 1English upgrade:1. 2C23T x 12. Instructions x 13. Red and black alligator clip probe x 14. Multimeter lead x 15. Charging cable x 16. Packing box x 17. 10x probe x 2Specification: Package Weight One Package Weight 0.70kgs / 1.54lb One Package Size 26cm * 13cm * 9cm / 10.24inch * 5.12inch * 3.54inch Qty per Carton 20 Carton Weight 13.50kgs / 29.76lb Carton Size 54cm * 29cm * 45cm / 21.26inch * 11.42inch * 17.72inch Loading Container 20GP: 378 cartons * 20 pcs = 7560 pcs40HQ: 878 cartons * 20 pcs = 17560 pcs

Read more less

1. Full color screen graphics display2. Infrared decoding, automatic calibration3. Power mode: rechargeable lithium battery4. One-key operation, automatic detection and shutdown, you can also press the multi-function key to turn off the detector5. It can measure triode, diode, resistance, capacitance, inductance, thyristor, field effect tube, voltage regulator tube, double diode, light emitting diode, etc.6. After the detection is completed, point the infrared remote control at the "IR" light and press the button on the remote control. If the detector decodes successfully, the data code and infrared waveform will be displayed7. Place the pin of the component in the corresponding area, and then turn the small handle, the detector will automatically test, and the result will be clearly displayed on the backlit TFT screen8. Display: 3.5 inch TFT screen9. Battery: 0.1-4.5V10. Resistance: 0.01-50Mohms11. Capacitance: 25pF-100mF12. Inductance: 0.01mH-20H13. Diode range: Less than 4.5V14. Triac range: IGT less than 6mA15. Zener diode detection area: 0.01-30V16. Size: 8.8 x 8 x 2.8cm17. Weight: 111.5gSpecification: Package Weight One Package Weight 0.13kgs / 0.28lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 80 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 80 pcs = 41600 pcs40HQ: 1209 cartons * 80 pcs = 96720 pcs

Read more less

1. Display: 2.4-inch TFT colour screen, LED backlighting2. Supply voltage: built-in 1500mAh rechargeable lithium battery3. Charging specification: USB Type-C, +5V4. Product volume: 79x103x31mm5. Real-time sampling rate: 10MSa / s6. Analogue bandwidth: 500Khz7. Input impedance: 1 milliohm8. Coupling method: AC/DC9. Test voltage range: 400V10. Vertical sensitivity: 10mV-10V11. Horizontal time base range: 1us-10s12. Trigger mode automatic: normal single13. Trigger type: rising edge/falling edge14. Compact body, simple modelling, easy to use, to meet the measurement routine15. Automatic identification and measurement of various transistors, including NPN and PNP transistors, N-channel and P-channel FETs, junction FETs, diodes, dual-diode thyristors, etc., as well as resistors, inductors, capacitors and other passive components16. Built-in 1500mAh high-capacity lithium battery, power supply continuous operation without isolation transformer, safer to use17. 2.4-inch anti-see-through high-resolution display, allowing you to read clearly even in bright sunlight18. One-piece folding, placed in a stable support, does not take up space19. Size: 79x103x31mmStandard:- DSO-TC3 Tester x 1-Type-C charging cable x 1-Common probe x 1-Test Hook x 3Upgrade:-DSO-TC3 Tester x 1-Adaptor x 1-P6100 High Voltage Probe x 1-Type-C charging cable x 1-Normal Probe x 1-Test Hook x 1Specification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 13cm * 18cm * 6cm / 5.12inch * 7.09inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 64cm * 32cm * 31cm / 25.2inch * 12.6inch * 12.2inch Loading Container 20GP: 420 cartons * 50 pcs = 21000 pcs40HQ: 975 cartons * 50 pcs = 48750 pcs

Read more less

Features:1. 2.0-inch smart screen, and added the test attributes of the smart multimeter. At the same time, it optimizes the use of functions and the testing experience. And added a "strong sensitivity detection mode" design.2. The clear EBTN display is clear and easy to read.3. Non-contact and pen-shaped design, easy to operate and carry.4. Dual mode operation (low sensitivity and high sensitivity)5. It has dangerous voltage induction alarm, DC/AC voltage, resistance, frequency, line/zero line difference, line breakpoint position, continuity check, flashlight characteristics, etc.6. It has 8 LED indicators in 3 colors (red/yellow): automatic identification of high/medium/low voltage.7. Alarm mode: sound, analog bar and indicator light (red/yellow).8. LED spotlight, low battery prompt, automatic shutdown function.Parameter:1. Voltage: 600V DC or 600V AC2. Frequency: 40 Hz-1000 Hz3. Impedance: 10Mohms4. AC voltage test: 12V-1000V5. Weight: 69 grams (without batteries)6. Dimensions: 160x28x32 mm7. Power supply: 2 AAA batteries (not included)Specification: Package Weight One Package Weight 0.25kgs / 0.55lb One Package Size 18cm * 9cm * 5cm / 7.09inch * 3.54inch * 1.97inch Qty per Carton 50 Carton Weight 12.00kgs / 26.46lb Carton Size 47cm * 36cm * 27cm / 18.5inch * 14.17inch * 10.63inch Loading Container 20GP: 583 cartons * 50 pcs = 29150 pcs40HQ: 1355 cartons * 50 pcs = 67750 pcs

Read more less

1. Screen size: 2.8 inches2. Screen material: TFT color screen3. Backlight: adjustable backlight brightness4. Charging power: 5V/1A5. Battery capacity: 3000mAh6. DC voltage: 1.9999V/19.99V/1000V7. Real-time sampling rate: 48MSa/second8. Analog bandwidth: 10MHz9. Input impedance: 1M10. Test voltage range: 80vpp-800vpp11. Vertical sensitivity: 10mV/div-10V/div12. Vertical displacement: adjustable with indicator13. Horizontal time base: 50ns-20s14. Trigger mode: Auto/Normal/Single15. Output waveform: 0-50KHz16. Square duty cycle: 0-100%, square and sawtooth adjustableSpecification: Package Weight One Package Weight 0.62kgs / 1.38lb One Package Size 20cm * 11cm * 9cm / 7.87inch * 4.33inch * 3.54inch Qty per Carton 40 Carton Weight 25.80kgs / 56.88lb Carton Size 57cm * 42cm * 38cm / 22.44inch * 16.54inch * 14.96inch Loading Container 20GP: 293 cartons * 40 pcs = 11720 pcs40HQ: 680 cartons * 40 pcs = 27200 pcs

Read more less

1. 4.3-inch IPS ultra-high definition screen, easy to use2. Built-in high-capacity lithium battery, long battery life3. Using the core of a powerful FPGA + MCU + high-speed ADC hardware architecture system waveforms smooth and clear4. Measurement of millivolt level of weak signals, support for 20M bandwidth limits5. Powerful waveform computing capabilities, real-time addition, subtraction, multiplication and division operations, in-depth analysis and processing of complex signals6. Real-time capture and display the changes in a variety of measurement parameters, forming a clear and concise data trend graph, but also has the ability to retain up to 5 groups of measurement data, at a glance7. Double current fuse, to prevent burning the meter more safely8. Easy to manage oscillometric images, can be connected to a computer via USB cable for secondary analysis9. Lightweight, one-handed, easy to put into a pocket or toolkit, convenient to carryBasic parameters:1. Screen material: surface tempered glass + glass GLASS material touch screen + IPS color screen2. Backlight: backlight brightness can be set3. Power supply: Type-C (5V/2A)4. Battery: 4000mAh li-ion battery5. Size: 145 x 98 x 35mm6. Weight: 360gOscilloscope parameters:1. Channel: dual-channel2. Bandwidth: 50MHz3. Real-time sampling rate: 250MSa / s4. Memory depth: up to 64kByte5. Time base range: 10ns/div-10s/div6. Vertical sensitivity: 10mv/div-10v/div7. Waveform display mode: YT / XY / scrolling8. Vertical resolution: 8 bits9. Input impedance: ΙΜΩ10. Bandwidth limitation: support 20MHz limitation11. Probe attenuation factor: 1x/10x12. Input coupling: AC/DC13. Trigger type: rising edge/falling edge14. Maximum voltage: +/-400V15. Trigger level range: 8 cells (positive and negative)16. Trigger mode: automatic / normal / single17. Memory space: 13M18. Measurement data: period, frequency, peak-to-peak value, maximum value, minimum value, average value, RMS value, amplitude, duty cycle and pulse widthSignal generator parameters:1. Different waveform output frequency: sine wave: 10MHz, other waveforms: 5MHz2. Waveform frequency: 0-10ΜΗz3. Waveform amplitude: 0.1V-3.0V4. Duty cycle of square wave: 0-100 percentMultimeter parameters:1. DC voltage: 1.9999V/19.999V/199.99V/1000.0V2. AC voltage: 1.9999V/19.999V/199.99V/760.0V3. DC current: 19.999mA/199.99mA/1.9999A/9.999A4. AC current: 19.999mA/199.99mA/1.9999A/9.999A5. Resistance: 19.999ΜΩ/1.9999ΜΩ/199.99ΚΩ/19.999ΚΩ/1.9999ΚΩ/199.99Ω6. Capacitance: 999.9uF/99.99uF/9.999uF/999.9nF/99.99nF/9.999nF9.999mF/99.99mF7. Temperature: -55-1300 degrees celsius/-67-2372 degrees fahrenheitSpecification: Package Weight One Package Weight 0.97kgs / 2.14lb One Package Size 24cm * 14cm * 7cm / 9.45inch * 5.51inch * 2.76inch Qty per Carton 20 Carton Weight 21.00kgs / 46.30lb Carton Size 49cm * 31cm * 39cm / 19.29inch * 12.2inch * 15.35inch Loading Container 20GP: 450 cartons * 20 pcs = 9000 pcs40HQ: 1044 cartons * 20 pcs = 20880 pcs

Read more less