Search results for "Raspberry Pi accessories"

1. This product features a compact layout design, allowing space for the built-in cooling fan of the Raspberry Pi 5 official case when connecting a 2230 size M-key M.2 peripheral to the Raspberry Pi 5.2. Supports NVMe protocol M.2 interface hard drives, offering high-speed reading and writing for high work efficiency.3. PCI-E ×1 Gen2 or Gen3 mode.4. Only supports Raspberry Pi 5B and 2230 size M.2 hard drives.5. Onboard work indicator lights: PWR is always on when powered, ACT flashes during reading and writing, providing a clear indication of the working status.6. HAT+ design with onboard EEPROM chip.7. Extends the single-channel PCIe 2.0 interface of the Raspberry Pi 5 (speed approximately 500MB/s).8. Supports M.2 M-key devices, only supporting 2230 size M.2 hard drives.9. Provides 3A current to the connected M.2 hard drive.10. Complies with Raspberry Pi HAT+ specifications and can be automatically detected via firmware.11. Compact layout design allows installation between the Raspberry Pi USB ports and the built-in cooling fan and case cover, improving compatibility with the Raspberry Pi 5 official case.12. Onboard LED indicators for power and ACT status.13. Designed specifically for stacking with the built-in cooling fan of the Raspberry Pi 5 official case.14. Dimensions: 65x56.5mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 4cm / 3.15inch * 3.15inch * 1.57inch Qty per Carton 192 Carton Weight 14.60kgs / 32.19lb Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch Loading Container 20GP: 461 cartons * 192 pcs = 88512 pcs40HQ: 1071 cartons * 192 pcs = 205632 pcs

Read more less

1. Connects for Raspberry Pi 5’s PCIe port via a 16-pin cable to provide an M.2 M-Key slot and an RJ45 Ethernet port, supporting booting the Raspberry Pi 5 from an NVMe solid-state drive2. Equipped with an RTL8125 network controller chip, it supports 2.5G high-speed network transmission and driver-free direct connection Raspberry Pi OS; it also supports IEEE 802.3af-compliant PoE (Power over Ethernet), enabling simultaneous data and power transmission over the Ethernet cable.3. The expansion slot is compatible with both 2230 and 2242 form factor M.2 NVMe solid-state drives and supports Gen2 transfer mode4. Offers three power supply options: a Type-C port, 7–24V screw-type terminal blocks, and a PoE Ethernet cable, meeting power requirements for various scenarios5. Integrates a Micro HDMI to standard HDMI female port function, supporting 4K video output, simplifying the connection process between the device and a display8. Dimensions: Approximately 86 x 52.5 x 49.5 mmPackage Contents:1. Adapter board x 12. 3-pin connector cable x 1 3. 3-pin connector cable (reverse orientation) x 1 4. Screw stud x 1 5. 16-pin FFC cable x 1Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 13cm * 9cm * 4cm / 5.12inch * 3.54inch * 1.57inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 44cm * 36cm * 20cm / 17.32inch * 14.17inch * 7.87inch Loading Container 20GP: 841 cartons * 100 pcs = 84100 pcs40HQ: 1954 cartons * 100 pcs = 195400 pcs

Read more less

1. Using pogo pin connection, the Zero 2W can be easily attached 2. Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards 3. Onboard headphone jack(extended from USB) and an additional speaker header 4. Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission 5. Onboard RTL8152B Ethernet chip, support 1-ch RJ45 Ethernet port, 10 / 100 M adaptive 6. Not compatible with the first generation Zero Package List: 1. Zero-to-Pi3-Adapter (B) x 1 2. HD-MI Adapter x 1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 4cm / 5.91inch * 4.72inch * 1.57inch Qty per Carton 100 Carton Weight 6.50kgs / 14.33lb Carton Size 42cm * 52cm * 32cm / 16.54inch * 20.47inch * 12.6inch Loading Container 20GP: 381 cartons * 100 pcs = 38100 pcs40HQ: 885 cartons * 100 pcs = 88500 pcs

Read more less

Overview1. Equip your Raspberry Pi with this 4-DOF metal robot arm, and get started to explore the world of artificial intelligent robotic.2. This starter robotic arm kit includes: servo driver HAT, metal mechanical arm structure, and 4x metal gear servos. When used with the Raspberry Pi, it is easy to control the arm by smart phone through Bluetooth or WiFi connection.The Servo DriverAdopts Servo Driver HAT:1. Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, Jetson Nano2. I2C controlled, using only 2 pins3. Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)4. Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal5. Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.6. Reserved I2C control pins, allows to work with other control boards7. Comes with development resources and manual (examples in python like Bluetooth/WiFi remote control)The Robot Arm Structure1. 4-DOF, large solid base, metal mechanical grasper2. Full aluminium alloy body, sandblasting oxidation surface, strong & durable3. Clever mechanical structure and mounting design, agile to control, easy to build4. Fitted with 4x metal gear servos (1x MG996R, 3x MG90S), large torque force, smooth movingPackage ContentsNote: micro:bit is NOT included.1. Metal arm parts x12. MG996R Servo x13. MG90S Servo x34. MG996R servo wheel x15. Servo Driver for micro:bit x16. Power adapter US plug 5V 3A Micro x17. Servo extension wire 150mm x18. Screws pack x19. Screwdrivers 2PCS x1Specification: Package Weight One Package Weight 0.55kgs / 1.21lb One Package Size 25cm * 15cm * 8cm / 9.84inch * 5.91inch * 3.15inch Qty per Carton 20 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 30cm * 40cm / 19.69inch * 11.81inch * 15.75inch Loading Container 20GP: 444 cartons * 20 pcs = 8880 pcs40HQ: 1031 cartons * 20 pcs = 20620 pcs

Read more less

1. CM5 socket: Compatible with all versions of Compute Module 5 2. Networking: 1000M Ethernet RJ45 interface, 2500M Ethernet RJ45 interface 3. USB: USB 3.2 Gen1 x 1; USB 2.0 interfaces x 3 4. Video: HDMI interface x 1, supports 4K output 5. M.2: M.2 M KEY (PCIe Gen2/3 x 1, 2230 / 2242); M.2 B KEY, supports connection to 4G / 5G communication modules 6. Storage: On-board Micro SD card slot (for CM5 versions without eMMC) 7. Serial interfaces: 2 x RS485 + 2 x RS232 or 4 x RS485 versions optional; 1 x CAN supports 1Mbps communication rate 8. Digital input/output: 2 x digital outputs + 2 x digital inputs 9. Audio: 3.5mm headphone jack (supports microphone), PH2.0 speaker interface 10. Fan interface: 5V, 4PIN JST-SH PWM fan connector 11. Buzzer: Single-channel controllable buzzer 12. Other: On-board EEPROM and encryption chip 13. Power input: 7V to 36V wide voltage (terminal block), 5V 5A (Type-C) 14. Dimensions: 136.00 x 92.00 x 39.50 mmSpecification: Package Weight One Package Weight 0.78kgs / 1.73lb One Package Size 18cm * 14cm * 6cm / 7.09inch * 5.51inch * 2.36inch Qty per Carton 30 Carton Weight 24.50kgs / 54.01lb Carton Size 38cm * 44cm * 32cm / 14.96inch * 17.32inch * 12.6inch Loading Container 20GP: 498 cartons * 30 pcs = 14940 pcs40HQ: 1157 cartons * 30 pcs = 34710 pcs

Read more less

1. Main controller chip: RTL8125 2. Ethernet port type: RJ45 2.5G Ethernet port 3. PCIe interface: PCIe ×1 Gen2 4. Power supply: 5V 5. Network standards: 10/100/1000/2500 Mbps 6. Status lights: green (flashes during communication); yellow (steady when connected)7. Size: approx. 8.5 x 3.75 cmFeatures:1. Connects to the Raspberry Pi via a 16-pin ribbon cable2. Equipped with a genuine Realtek RTL8125 high-performance controller chip3. Includes a transparent acrylic support plate; features a side-mount design that does not occupy space on the top of the board4. Powered by the PCIe ribbon cable by default5. Supports for Raspberry Pi OS without drivers; plug-and-playSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 12cm * 6cm * 2cm / 4.72inch * 2.36inch * 0.79inch Qty per Carton 380 Carton Weight 23.80kgs / 52.47lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 380 pcs = 156560 pcs40HQ: 958 cartons * 380 pcs = 364040 pcs

Read more less

1. Good condition,with high quality ,great performance2. Cooling fan run smoothly, long life keep CPU safe without overheating3. Compatible with Raspberry Pi CM4 robotic projects and development boardsSpecification:1. Rated Power: 1W (5V, 0.2+/-0.02A); 1.62W (for 12V, 0.135+/-0.02A)2. Rated Speed: 5000+/-10%RPM( for 5V); 8000+/-10%RPM ( for 12V)3. General: Low-profile, PWM speed adjustment4. Interface: 4-wire PWM speed-adjustable fan header5. Cable length: 90+/-10mm6. Size: 54 x 39 x 13mmPackage List:1. CM4-FAN-3007 x 12. Screws and thermal tapes x 1Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 200 pcs = 100000 pcs40HQ: 1162 cartons * 200 pcs = 232400 pcs

Read more less

OverviewThis is a 2-DOF pan-tilt kit designed for Raspberry Pi. With onboard PCA9685 PWM chip and TSL2581 ambient light sensor, it allows the Pi to control camera movement and sense light intensity through I2C interface.Features1. Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+2. I2C interface, only 2 pins are required for moving and light intensity sensing3. Onboard PCA9685 chip, provides 12-bit resolution PWM signal for moving control4. Onboard TSL2581FN light-to-digital converter, with embedded ADC, provides a value that approximates the human eye response to assist the module5. Onboard voltage level translator, compatible with 3.3V/5V operating voltage6. Specific acrylic board to fix the Raspberry Pi camera, make it easy to install7. Comes with development resources and manual (demo code, assembly guide)Specifications1. PWM driver: PCA96852. PWM resolution: 12-bit3. Ambient light sensor: TSL2581FN4. Ambient light resolution: 16-bit5. Communication interface: I2C6. Operating voltage: 3.3V/5V7. Dimension: 56.6mm x 65mmHow to AssembleA little assembly work is required to use the Pan-Tilt HAT, yet its pretty easy to do, heres the assembly guide.Package Contents1. Pan-Tilt HAT x12. 2-DOF pan-tilt kit x13. SG90 servo x14. MG90S servo x15. Acrylic board x16. M2 screws pack x17. RPi screws pack (2pcs) x1Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 8cm * 7cm * 2cm / 3.15inch * 2.76inch * 0.79inch Qty per Carton 700 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 35cm * 40cm / 22.05inch * 13.78inch * 15.75inch Loading Container 20GP: 340 cartons * 700 pcs = 238000 pcs40HQ: 789 cartons * 700 pcs = 552300 pcs

Read more less

GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi, Based on SIM868Overview1. This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.2. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.Features1. Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W2. Support SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.3. Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning4. Bluetooth 3.0, supports data transferring through Bluetooth5. Onboard USB TO UART converter CP2102 for UART debugging6. 6x LEDs for indicating the module working status7. SIM card slot for 1.8V/3V SIM card8. RTC with backup battery holder9. Baudrate auto detection (1200bps ~115200bps)10. Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)11. Support SIM application toolkit: GSM 11.14 Release 9912. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)GSM/GPRS1. Band- GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz- Quad-band auto search- Compliant to GSM phase 2/2+2. Emitting power- Class 4 (2W @ GSM 850/EGSM 900 MHz)- Class 1 (1W @ DCS 1800/PCS 1900 MHz)4. GPRS connectivity- GPRS multi-slot class 12 (default)- GPRS multi-slot class 1~12 (configurable)5. GPRS data feature- Downlink speed: max 85.6kbps- Uplink speed: max 85.6kbps- Coding schemes: CS-1\CS-2\CS-3\CS-4- Support PAP (Password Authentication Protocol) for PPP connection- Support PBCCH- Support USSD6. SMS- Support: MT/MO/CB/Text/PDU mode- SMS storage: SIM card7. Audio- Voice encode/decode mode: Half Rate\Full Rate\Enhanced Full Rate\Adaptive muti rate- Support echo cancellation- Support noise reductionGNSS1. Receiver type- 33 tracking channels- 99 acquisition channels- GPS L1 C/A code2. Sensitivity- Tracking: -165 dBm- Cold starts: -148 dBm3. Time-To-First-Fix- Cold starts: 28s (typ.)- Hot starts: < 1s- Warm starts: 26s4. Accuracy- Horizontal position: <2.5m CEPBluetooth1. Integrates AT commands2. Compliant to Bluetooth specification3.0 + EDR3. Support SPP, OPP, HFP/HSP, etc.Misc1. Operating voltage: 5V2. Operating temperature: -40 degree C ~ 85 degree C3. Storage temperature: -45 degree C ~ 90 degree C4. Dimensions: 30.2mm x 65mmWhat is on Board1. SIM868 module2. ZMM5V1: Regulator diode3. SMF05C: TVS diode4. CP2102: USB TO UART converter5. MP1482: Power chip6. NDC7002N: Voltage level translator7. GPS status indicator8. NET indicator:- Flashes fast when the module starts up- Flashes slowly after GSM register succeed9. STA module working status indicator10. SIM868 UART Tx/Rx indicator11. Power indicator12. SIM868 control button: press the button and hold for 1s, to startup/shutdown the SIM86813 .Raspberry Pi GPIO connector14. SIM card slot15. USB TO UART interface16. 3.5mm earphone/mic jack17. GNSS antenna connector18. Bluetooth antenna connector19. GSM antenna connector20. CR1220 battery holder: for RTC backup battery21. UART selection switch- A: Control the SIM868 through USB TO UART- B: Control the SIM868 through Raspberry Pi- C: Access Raspberry Pi through USB TO UARTPackage Contents1. GSM/GPRS/GNSS HAT x12. GSM Antenna x13. GPS External Antenna (B) x14. Bluetooth Antenna x15. USB type A plug to micro plug cable x16. RPi screws pack (2pcs) x1Specification: Package Weight One Package Weight 0.19kgs / 0.41lb One Package Size 14cm * 8cm * 3cm / 5.51inch * 3.15inch * 1.18inch Qty per Carton 260 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 40cm * 39cm / 22.05inch * 15.75inch * 15.35inch Loading Container 20GP: 305 cartons * 260 pcs = 79300 pcs40HQ: 708 cartons * 260 pcs = 184080 pcs

Read more less

1. Image Sensor: Sony IMX415 2. CMOS Size: 1/2.9 inches 3. Camera Type: Color4. Effective Pixels: Approx. 8.29 MP (3840 x 2160) 5. Diagonal Size: 6.43 mm 6. Pixel size: 1.45 μm (H) x 1.45 μm (V) 7. Aperture: F2.2 8. Focal length: 3.3 mm 9. Field of View: 93.5 degrees (D) x 85.2 degrees (H) x 55.5 degrees (V) 10. Distortion: -0.4% 11. Application Scenarios: AI applications such as facial recognition, road sign recognition, and license plate recognition 12. Compatible Boards: Compatible with Raspberry Pi 5 / Zero series / Zero 2W series boards (4B / 3B+ / 3B series require an additional FPC cable)13. Dimensions: Approx. 3.8 x 1.63 cm Features:1. 8MP High-Definition Image Quality: Equipped with an IMX415 sensor, it delivers high-resolution imaging with approximately 8.29 million pixels (3840 x 2160).2. Flexible Autofocus: Supports smooth, lag-free autofocus for more precise and flexible shooting and capture (requires the host device to support autofocus).3. Wide-Angle Field of View: Features a built-in 93.5-degree wide-angle lens, providing a broader field of view and a wider viewing angle4. High Signal-to-Noise Ratio and Excellent Low-Light Performance: Delivers superior imaging results in low-light environments, producing more realistic and detailed images5. Low-Distortion Design: Equipped with a distortion-free lens featuring a distortion rate of only -0.4%, delivering distortion-free imaging and more accurately reproducing real-world scenesSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 6cm * 3cm / 3.15inch * 2.36inch * 1.18inch Qty per Carton 100 Carton Weight 5.80kgs / 12.79lb Carton Size 42cm * 33cm * 20cm / 16.54inch * 12.99inch * 7.87inch Loading Container 20GP: 962 cartons * 100 pcs = 96200 pcs40HQ: 2233 cartons * 100 pcs = 223300 pcs

Read more less

About the ProductThis 3.5 inch touch screen module is designed especially for Raspberry Pi, using the latest Linux Core system (vision 3.18.9), the latest Raspberry Pi official UI desktop file system and the fastest SPI transmission data, an ideal alternative solution for HDMI monitor and convenient Men-Machine interface for Raspberry Pi, combined with the portable power, DIY anywhere anytime.Features1. LCD Interface: SPI. 2. Touch Screen Controller: XPT2046. 3. Backlight: LED. 4. LCD Type: TFT. 5. Resolution: 320*480 DOTS. 6. Core System: vision 3.18.9. 7. SPI Speed: 32MHz. 8. Color Levels Index: 65536. 9. Power Consumption/Backlight Current: TBD. 10. Supports Raspbian system, enables your system to: - Play videos (supports multi formats, MP4 and so on). - Take photos by touching (up to 17 camera modes). - Support software keyboard (system interaction without keyboard/mouse). - Support driver is installed automatically.Specification: General Model C0278 Size 8.6*5.6*2cm Weight 51g LCD Interface SPI Touch Screen Controller XPT2046 LCD Type TFT Resolution 320*480 DOTS Core System Vision 3.18.9 SPI Speed 32MHz Power Consumption/Backlight Current TBD Package Include Package Contents 1 x LCD Touchscreen 1 x Stylus Pen Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 12cm * 7cm * 3.5cm / 4.72inch * 2.76inch * 1.38inch Qty per Carton 100 Carton Weight 8.70kgs / 19.18lb Carton Size 37cm * 37cm * 26cm / 14.57inch * 14.57inch * 10.24inch Loading Container 20GP: 749 cartons * 100 pcs = 74900 pcs40HQ: 1739 cartons * 100 pcs = 173900 pcs

Read more less

This board can be used with Arduino /Raspberry Pi boardModule itself can adapt 3.3V and 5V systems without level conversion.Features1. Within -40 degree C to +85 degree C temperature range, timing accuracy is maintained at +/- 5ppm (+/- 0.432 sec / day).2. Provide battery backup for continuous timing.3. Low-power.4. Device package and function compatible with the DS3231.5. Complete clock functions include seconds, minutes, hours, day, date, month and year timing, and provide valid to 2100.6. Two calendar alarm.7. 1Hz and 32.768kHz output.8. Reset button and button input.9. High-speed (400kHz) I2C serial bus.10. +2.3 V to +5.5 V supply voltage.11. +/-3 degree C accuracy digital temperature sensor.12. -40 degree C to +85 degree C operating temperature range.13. 16-pin SO (300mil) packageSpecification1. Brand: Landa tianrui2. Model: LDTR-WG02113. Quantity: 1 piece4. Color: Black5. Material: PCB6. Chipset: DS32317. Dimensions: 2.2 cm x 1.2 cm x 0.5 cm8. Weight: 5g9. Package List: 1 x DS3231 Clock ModuleSpecification: Package Weight One Package Weight 0.02kgs / 0.03lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs40HQ: 661 cartons * 6240 pcs = 4124640 pcs

Read more less