Search results for "electronic modules"

1. Size: 38mm (length) X22mm (width) X14mm (height)2. Weight: 8g3. Working voltage: 3.3--5.5V4. Clock chip: High-precision clock chip DS32315. Clock accuracy: Within 0-40 degree C, accuracy 2ppm, annual error about 1 minute6. With 2 calendar alarm clocks7. Programmable square wave output8. Real-time clock generates seconds, minutes, hours, week, date, month and year time, and provides leap year compensation valid to 2100 years9. The temperature sensor inside the chip has an accuracy of +/- 3 degree C10. Memory chip: AT24C32 (storage capacity 32K)11. IIC bus interface, high transmission speed 400KHz (when working voltage is 5V)12. Can cascade other IIC devices, 24C32 address can be modified by short circuit A0 / A1 / A2, the default address is 0x5713. With rechargeable battery LIR2032 to ensure that the clock still runs normally after the system is powered off14. Packing: Single anti-static packaging15. Wiring instructions (taking Arduino uno r3 as an example):SCL -- A5SDA -- A4VCC -- 5VGND -- GND16. DS3231 is a low-cost, high-precision I2C real-time clock (RTC) with integrated temperature-compensated crystal oscillator (TCXO) and crystal. The device contains a battery input, which can maintain accurate timing when the main power is disconnected. The integrated crystal oscillator improves the long-term accuracy of the device and reduces the number of components in the production line. The DS3231 offers commercial and industrial temperature ranges and is available in a 16-pin 300mil SO package.17. RTC saves seconds, minutes, hours, day, date, month and year information. Months less than 31 days will automatically adjust the end of the month, including corrections for leap years. The working format of the clock can be 24 hours or a 12-hour format with / AM / PM indication. Provide two configurable calendar alarms and a configurable square wave output. The address and data are transferred serially via the I2C bidirectional bus.Sophisticated, temperature-compensated voltage reference and comparator circuits are used to monitor VCC status, detect power failures, provide reset outputs, and automatically switch to backup power when necessary. In addition, the / RST monitor pin can be used as a manual input to generate a μP reset.18. In addition to high timing accuracy, the DS3231 also has some other functions that expand the additional functions and selection range of the system host. The device integrates a very accurate digital temperature sensor, which can be accessed through the I2C * interface (just like time). The accuracy of this temperature sensor is +/- 3 degree C. The on-chip control circuit can realize automatic power supply detection and manage the power supply switching between the main power supply and the backup power supply (that is, the low-voltage battery). If the main power supply is powered down, the device can continue to provide accurate timing and temperature without affecting performance. When the main power supply is re-energized or the voltage value returns to the allowable range, the on-chip reset function can be used to restart the system microprocessor.Specification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 8cm * 5cm * 5cm / 3.15inch * 1.97inch * 1.97inch Qty per Carton 500 Carton Weight 7.00kgs / 15.43lb Carton Size 30cm * 30cm * 38.9cm / 11.81inch * 11.81inch * 15.31inch Loading Container 20GP: 761 cartons * 500 pcs = 380500 pcs40HQ: 1768 cartons * 500 pcs = 884000 pcs

Read more less

1. LCD screen display with synchronised lyrics2. Bluetooth call and recording function, Bluetooth version 5.03. Decode MP3, WMA, WAV, FLAC, APE lossless format music4. Read USB disk TF card5. Support FM radio, frequency band (87.5MHZ-108.0MHZ)6. External audio input LINE IN 7. Support 10m distance infrared remote control operation8. Pushbuttons: six buttons for multi-directional control, REC / REPEAT / VOL- / AUTO / VOL+ / MODE9. 12V power supply, power failure memory10. Dimensions: length 90 x width 57 mm; depth 28 mmKey operation details: 1. REC: press the REC button to start recording, press the REC button again to cancel the recording function and play the recording file; when recording than a storage device needs to be connected, e.g. U disk or TF card.2. REPEAT: Press once for the single song loop function, then press again to cancel the single song loop and play in sequence.3. VOL-key (previous song/volume down): short press for previous song in MP3 status, long press for volume down; short press for adjusting a station number upwards in FM status; short press for Bluetooth previous song in Bluetooth function, long press for volume down4. AUTO button (play/pause): short press for play/pause in MP3; short press for play/pause in FM, long press for auto receive and save station; short press for play/pause in BluetoothVOL+ button (next song/volume up): short press for next song in MP3, long press for volume up; short press for downward adjustment of a station number in FM; short press for next song in Bluetooth, long press for volume down6. MODE button: switch between USB / TF / FM / Audio input / Bluetooth function in sequenceSpecification: Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 11cm * 7cm * 5cm / 4.33inch * 2.76inch * 1.97inch Qty per Carton 356 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 356 pcs = 63012 pcs40HQ: 412 cartons * 356 pcs = 146672 pcs

Read more less

1. Input voltage: DC 5V - 35V2. Input method: 5.1 Bluetooth audio decoding, USB computer sound card decoding3. Bluetooth version: 5.14. Bluetooth name: LQSC_BT5. Output method: 3.5MM stereo headphone jack, XH 2.54-3P stand-alone socket6. Signal-to-noise ratio: -95DB7. Distortion THD: 0.05%8. Operating temperature: -40℃ to 85℃9. LED indicator explanation:- Fast flashing: waiting for connection- Slow flashing: audio playing- Constantly on: connected10. Size: about 5.5 x 3.2 x 1.2cm11. Shipping list: bluetooth audio decoding board x 1, 2.54mm 3P audio shielding cable x 1, 2.54mm 3P socket terminal x 1 Characteristics:1. Full patching process2. Wide range of operating voltage3. Protection against reverse power connection4. Dual audio output terminals5. Can be externally connected with antenna (suitable for installation inside a metal box)Specification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 7cm * 6cm * 5cm / 2.76inch * 2.36inch * 1.97inch Qty per Carton 225 Carton Weight 7.00kgs / 15.43lb Carton Size 47cm * 37cm * 32cm / 18.5inch * 14.57inch * 12.6inch Loading Container 20GP: 479 cartons * 225 pcs = 107775 pcs40HQ: 1112 cartons * 225 pcs = 250200 pcs

Read more less

OPCOM 2014V diagnostic tool for Opel cars covers almost all Models for Opel cars, even new cars with CAN-BUS based diagnostic. Such as diagnostic function for Vectra-C, for Astra-H, for Zafira-B etc. It lets you read and clear fault codes, support many control units. Opcom OP-Com 2014 V Can OBD2 for Opel Firmware V1.99 with PIC18F458 Chip. Attention for Latest Opcom Software VAUX-COM_120309a.exe: 1. If you run it on XP or Win7, please make sure you install dotnetfx35_SP1 system patch, or Opcom software can not perform well 2. When you install on Win7 and open software, please choose Run as administrator, and read the installation video on CD carefully Feature: 1. OPCOM is a special PC Based diagnostic interface especially for OPEL. 2. Software Version: 120309a Firmware Version: 1.99 3. Never Update Online. Online Updation Will Damage The OP-COM Function: 1. It covers almost all Models for Opel cars, even new cars with CAN-BUS based diagnostic, such as for Vectra-C, for Astra-H, for Zafira-B etc. 2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test. 3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples. 4. Since many pins used in the OBD connector for Opel, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000) 5. Fault codes will be shown with all available information: Full Fault Code Text Description: 1. Full status information (Present, Not present, Intermittent) 2. You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window. 3. The program shows you measuring block information on many control module, you can choose anything from the list on your own. 4. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast! You can also run output tests on many controllers: PIN6-PIN14 PIN3-PIN11 PIN1 HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps Package list: 1pc x OP COM Interface 1pc x USB CableSpecification: General Compatible with Opel: Corsa, Signum, Vivaro, Combo, Movano, E9, Movano U9, Astra, Zafira, Insignia Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 15cm * 9cm * 5cm / 5.91inch * 3.54inch * 1.97inch Qty per Carton 40 Carton Weight 8.00kgs / 17.64lb Carton Size 40cm * 30cm * 25cm / 15.75inch * 11.81inch * 9.84inch Loading Container 20GP: 888 cartons * 40 pcs = 35520 pcs40HQ: 2063 cartons * 40 pcs = 82520 pcs

Read more less

1. Designed for Laser Engraver, 3D printer, CNC mill, Arduino project. 2. 15W Optical power output, 4mm plywood from 1 pass(speed 200), 3mm black acrylic board from 1 pass. Able to engrave stainless steel, but it needs good focus adjustment. 3. More Safety, Built-in protective glass to protect eyes! Even without wearing protective glasses, the operation is more comfortable. 4. More Quiet, Intelligent drive adjust the cooling fan speed according to laser temperature. 5. Easy use, Digital PWM wave pulse signal generator adjustable frequency duty cycle board for NEJE laser module. 6. Slidable mounting fixture is provided for easy adjustment of focus. Specification: 1. Heatsink Material: Aircraft Aluminum + Brass Shell 2. Luminous Color: Blue 3. Section Size: 40mm x 40mm 4. Cooling Mode: Temperature sensor intelligent control + 10000 rpm 40mm cooling fan 5. Dimension: 60 x 40 x 40mm 6. Adapter Plug: 5.5 2.1 port 7. Can Engrave: MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum/Mirror Stainless Steel 8. Can Not Engrave: Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material Technical Parameters: 1. Module Input: 30-40W 2. Optical power output: 15W 3. Wavelength: 445-450nm 4. Beam Shape: Dot (Focusable) 5. Working Voltage: DC 12V 6. TTL&PWM Modulation: YES, compatible with Both TTL & PWM Modulation 7. Input Voltage: DC12V 3-4A 8. PWM/TTL Input: DC3.3V-12V 9. Input Interface: PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-) 10. NOTE: Temperature interface can be disconnected 11. Drive Mode: External ACC 12. Safe temperature range: <60 degrees Celsius 13. Module weight: 202g ( The lighter the weight, the smaller the moving inertia, the better the performance ) 14. Life Time: 10000-20,000 hours Package Included - 1 x Laser Engraving Module - 1 x Laser Module Sliding fixture - 1 x 4 Pin Cable(1m) - 1 x NEJE Digital PWM Wave Pulse Signal Generator Adjustable board - 1 x 2.5mm L-shaped wrench - 1 x 5mm L-shaped wrench - 1 x 4Pin Cable - 1 x 3Pin Cable - 1 x 2Pin CableSpecification: Package Weight One Package Weight 0.38kgs / 0.84lb One Package Size 17cm * 11cm * 6cm / 6.69inch * 4.33inch * 2.36inch Qty per Carton 50 Carton Weight 22.50kgs / 49.60lb Carton Size 55cm * 35cm * 32cm / 21.65inch * 13.78inch * 12.6inch Loading Container 20GP: 432 cartons * 50 pcs = 21600 pcs40HQ: 1004 cartons * 50 pcs = 50200 pcs

Read more less

1. The SQU OF110 Emulator Pro is a professional multi-function device designed to simplify immobilizer (IMMO) repairs, steering lock diagnostics, airbag system troubleshooting, and tachometer testing. Compatible with a wide range of global vehicle ECUs, it provides reliable solutions for auto workshops and DIY enthusiasts.2. Immobilizer Signal Emulation: tes IMMO signals to bypass damaged immobilizers or ECUs. Resolves issues caused by lost keys, engine replacements, or faulty immobilizer modules.3. ESL/ELV Simulation: Simulates electronic steering lock (ESL/ELV) signals to bypass hardware failures. Avoids costly OEM steering lock replacements.4. Passenger Seat Sensor Diagnostics: Detects faults in seat occupancy sensors linked to airbag control modules. Helps isolate errors (sensor vs. airbag module) by simulating valid signals.5. Tachometer Signal Testing: Generates simulated RPM signals to test instrument cluster functionality. Verifies system compatibility before permanent installation.Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 9 Carton Weight 3.80kgs / 8.38lb Carton Size 41cm * 35cm * 32cm / 16.14inch * 13.78inch * 12.6inch Loading Container 20GP: 580 cartons * 9 pcs = 5220 pcs40HQ: 1348 cartons * 9 pcs = 12132 pcs

Read more less

1. Programmable timing relay modules are widely used in car modification & industrial electromechanical equipment2. Voltage input anti-reverse connection circuit, worry-free wiring3. Signal input optocoupler isolation, strong anti-interference ability4. Set parameters for long-term memory after power off5. Powerful FLASH MCU online programming function, according to user needs, you can contact the manufacturer to customize the required functions6. Working temperature: -40 to 85 degrees Celsius7. Working voltage: DC12V (normal working voltage DC1OV-16V)8. Signal source: DC4V-20V (common power supply positive trigger, button, PNP sensor, PLC signal, etc.)9. Output capability: It can control equipment within DC 30V5A or AC 220V5A10. Static current: 20MA11. Working current: 50MA12. Service life: more than 100,000 times13. Size: 64.2 x 34.8 x 18.5MM14. Net weight: about 26GPattern introduction- P-1: trigger received- A1: Triggering again during the delay is invalid- A2: Re-timing is triggered again during the delay- A3: During the delay period, the relay is triggered again to reset and terminate the timing appliance, the Y time starts, and the relay is disconnected when the timing ends- P-2: Receive a trigger signal, start X time, and continue when time ends- P-3: Cycling switch mode- A1: The relay is turned on after the power is turned on, and it is turned off when the timing is over, infinite loop- A2: The relay is disconnected after the power is turned on, and it is connected after the timing is over, infinite loop- P-4: After receiving the trigger signal, the relay will continue to be connected until the signal disappears and start timing. After the timing ends, the relay will be disconnected. If the trigger signal is received again during the delay period, the delay will be canceled until the signal disappears, and the timing will be restarted.Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 5cm * 3cm / 3.94inch * 1.97inch * 1.18inch Qty per Carton 500 Carton Weight 27.00kgs / 59.52lb Carton Size 50cm * 50cm * 54cm / 19.69inch * 19.69inch * 21.26inch Loading Container 20GP: 197 cartons * 500 pcs = 98500 pcs40HQ: 458 cartons * 500 pcs = 229000 pcs

Read more less

1. Shell material: LCP2. Application: home appliances/smart home3. Suitable for various electronic projects4. DC power jack female socket design for easy installation5. Durable material, providing long-lasting performance6. Compatibility, ensure safe fit for your deviceSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 15cm * 5cm / 5.91inch * 5.91inch * 1.97inch Qty per Carton 36 Carton Weight 2.20kgs / 4.85lb Carton Size 47cm * 32cm * 32cm / 18.5inch * 12.6inch * 12.6inch Loading Container 20GP: 554 cartons * 36 pcs = 19944 pcs40HQ: 1286 cartons * 36 pcs = 46296 pcs

Read more less

Features1. Comes with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, supports 5G NSA and SA networking, supports multi-mode multi-band 2. Multi-constellation dual-band positioning: GPS, Beidou, Glonass, Galileo, and QZSS 3. Operating system support: Windows/Linux/Android 4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication 5. Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 series 6. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 9. 4x SMA to IPEX antenna connectors, with pre-soldered SMA terminals for connecting antennas 10. 2x SIM card slot, dual card single standby, switchable via AT command 11. Onboard audio jack and audio decoder, allows audio operation like making phone call 12. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. Sub-6G (SA): n1, n2, n3, n5, n7, n8, n12, n20, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 2. Sub-6G (NSA): n41, n77, n78, n79 3. LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 4. LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48 5. WCDMA: B1, B2, B3, B4, B5, B8 6. GNSS: GPS, GLONASS, Beidou, Galileo, and QZSS Data rate 1. Sub-6G: 2.4 Gbps (DL) / 500 Mbps (UL) 2. LTE: 1 Gbps (DL) / 200 Mbps (UL) 3. HSPA+: 42 Mbps (DL) / 5.76 Mbps (UL) Software functions 1. Operating systems: Windows/Linux/Android 2. Communication protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 3. SMS: Supports MT, MO, CB, Text, PDU 4. Firmware upgrade: Supports firmware upgrade via USB port Applications 1. Applicable regions: Regions with 5G Sub-6G signal coverage including China, US, Japan, South Kor, Europe, the Middle East, Latin America, etc. 2. Application examples: CPE, Smart gateway, Drone, Live streaming, Remote treatment, Intelligent securityPackage List1. M.2 TO 4G/5G HAT x1 2. SIM8202G-M2 x1 3. Antenna 4pcs x1 4. IPEX adapter cable 4pcs x1 5. 2 x 20PIN pin header x1 6. Passive GPS antenna x1 7. Dual plug USB3.0 cable x1 8. USB 3.0 adapter x1 9. USB 2.0 adapter x1 10. SMA protective cap 4pcs x1 11. Screws pack x1Specification: Package Weight One Package Weight 0.34kgs / 0.74lb One Package Size 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch Qty per Carton 40 Carton Weight 11.00kgs / 24.25lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 40 pcs = 22640 pcs40HQ: 1314 cartons * 40 pcs = 52560 pcs

Read more less

1. The input is a switch signal. When the input port is short-circuited to the ground (GND), an alarm message will be sent to the preset alarm phone, or call the set alarm number. The content of the alarm message can be set by yourself 2. It is simple and convenient to use, can be well embedded in other equipment, and act as a remote alarm working system 3. The alarm content of 1 alarm input and the alarm content when it is restored to normal can be defined by yourself 4. Built-in rechargeable lithium battery, usually in a charging state, when the main power is off, it will provide power and send an alarm message to the preset number 5. Power supply: DC 5V-15VSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 13cm * 10cm * 3.1cm / 5.12inch * 3.94inch * 1.22inch Qty per Carton 60 Carton Weight 8.43kgs / 18.58lb Carton Size 41cm * 34cm * 22cm / 16.14inch * 13.39inch * 8.66inch Loading Container 20GP: 869 cartons * 60 pcs = 52140 pcs40HQ: 2018 cartons * 60 pcs = 121080 pcs

Read more less

1. The combination of aviation aluminum alloy and resin, combined with the bright colors of fashion, make the overall appearance of the texture. 2. The second-generation ring iron hybrid drive, once again enhances the sound detail expression, has the shocking low frequency of the moving coil unit, and also has the powerful high frequency of the moving iron unit. The analysis is more rich and delicate, rolling traditional single-action ring headphones. 3. The sound that the dynamic circle ca not show, the moving iron is supported by the compensation, and the professional-grade sound quality is presented. 4. The four-layer voice coil brings a stronger driving force, the low frequency is powerful, the sound field width is extended, and the overall hearing is more appealing. 5. Professional electronic crossover tuning technology. The precise internal acoustic structure design and subtle circuit optimization can separate the two sounding units separately. The moving iron is responsible for interpreting the middle and high-pitched parts, and the moving coil is responsible for interpreting the subwoofer to achieve balanced, clean and detailed sound quality. . 6. Improved 0.75mm gold-plated 2 Pin plug-in structure, limit slot protection design, effectively protect the needle to prevent breakage, extend the number of interface insertion and removal and service life. 7. Assemble the Bluetooth module (sold separately) and change into the Bluetooth headset in seconds. Assemble the upgraded wire (sold separately) to improve the sound quality of the headphones. 8. 26dB noise reduction, no reducing passion. Wearing the headphones correctly without playing music can directly isolate the noise of about 26dB, so that you can listen to the music details in a noisy environment, and also better protect your hearing. 9. Durable wire, providing excellent sound quality signal transmission, anti-pull, anti-bending, anti-corrosion. 10. Ergonomic and acoustic structural features for comfortable and stable wear, long-wearing and painless. 11. Three stainless steel screw-mounted headphone body, exquisite and durable. Product parameters: 1. Sensitivity: 104dB. 2. Impedance: 25 ohms. 3. Frequency response range: 20-40000Hz. 4. Plug type: 3.5mm, pin type: 0.75mm. 5. Cable length: 120-130cm. 6. Product weight: 20-26g.Specification: Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 12cm * 6cm * 3cm / 4.72inch * 2.36inch * 1.18inch Qty per Carton 180 Carton Weight 21.70kgs / 47.84lb Carton Size 47cm * 38cm * 26cm / 18.5inch * 14.96inch * 10.24inch Loading Container 20GP: 574 cartons * 180 pcs = 103320 pcs40HQ: 1333 cartons * 180 pcs = 239940 pcs

Read more less

Features1. 4.0 is a multifunctional and Comprehensive car electronic products with smallest body and more chips in the world. 2. Viecar 4.0 was designed by Bluetooth 4.0 dual module which could support IOS and Android Device. 3. Viecar 4.0 transfers data rapidly, with low power dissipation advantage and saves power. 4. Viecar 4.0 including fuel consumption analyze and assessment could save oil save money for us. 5. Viecar 4.0 also record driving behavior, analyze car information, suggest improvement to help us to correct our bad driving habits. 6. By connecting cars ECU and computer it realize 360 degree whole car testing could find out the fault code earlier to help us to deal with it in time.Support OBD-II Protocols1. SAE J1850 PWM (41.6 Kbaud) 2. SAE J1850 VPW (10.4 Kbaud) 3. ISO 9141-2 (5 baud init, 10.4 Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud)Compatible Softwares1. Windows: Scan Master-ELM, Scan Tool.net, PCMSCAN 2. Android: Torque Pro, Dashcommand, OBD2 3. Symbian: OBDScopeSpecification: General Types Diagnostic Scanner Languages Chinese, English Material Electronic Component, ABS Special Functions Bluetooth dual (2.0/4.0) Voltage 9V-16V Adaptable Automobile OBDII cars Software Windows / Android / Symbian Operating Temperature -40 to 85 Degree C Humidity <=60% Interface USB 2.0 Size 45mm x 40mm x 18mm Package Include Package Contents 1 x Diagnostic Scan Tool Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 16cm * 8cm * 8cm / 6.3inch * 3.15inch * 3.15inch Qty per Carton 80 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 34cm * 34cm / 16.54inch * 13.39inch * 13.39inch Loading Container 20GP: 549 cartons * 80 pcs = 43920 pcs40HQ: 1275 cartons * 80 pcs = 102000 pcs

Read more less