Search results for "environmental electronics"
-
Waveshare Waveshare SX1262 LoRa HAT 915MHz Frequency Band for Raspberry Pi, Applicable for America / Oceania / Asia, 915MHz
Overview1. This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.Features1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. Onboard CP2102 USB TO UART converter, for serial debugging3. Bring the UART control interface, for connecting host boards like Arduino/STM324. 4x LED indicators, easy to check the module status5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications8. Customizable communication key which wont be retrieved, greatly improves the security of user data9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network11. Support wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter12. Support fixed-point transmission, broadcast, signal channel monitor13. Come with development resources and manual (examples for Raspberry Pi/STM32)What is on Board1. SX1262 LoRa module2. 74HC125V: voltage level translator3. CP2102: USB TO UART converter4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi5. USB TO UART port6. UART header: for connecting host boards like STM32/Arduino7. SMA antenna connector8. IPEX antenna connector9. Indicators:- RXD/TXD: UART RX/TX indicator- AUX: auxiliary indicator- PWR: power indicator10. UART selection jumpers- A: Control the LoRa module through USB TO UART- B: Control the LoRa module through Raspberry Pi- C: Access Raspberry Pi through USB TO UART11. LoRa mode selection jumpers- Short M0, short M1: Transmission mode- Short M0, open M1: Configuration mode- Open M0, short M1: WOR mode- Open M0, open M1: deep sleep modeSpecification1. RF module: SX12622. Frequency band: 850.125 ~ 930.125MHz3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)4. Transmit power: 22.0dBm (10/13/17/22dBm programmable)5. Receive sensitivity: -147dBm (radio rate 2.4kbps)6. Power consumption: - Transmit current: 133mA (transient consumption)- Receive current: 11mA- Sleep current: 2uA (LoRa module software shutoff)7. Communication interface: UART (TTL level)8. Baudrate: 1200bps ~ 115200bps (9600bps by default)9. Packet length: 240 Byte (32/64/128/240 Byte programmable)10. Cache: 1000 Byte11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)12. Power supply: 5V13. Logic level: 3.3V/5V14. Operating temperature: -40~85 degree C15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications16. Dimensions: 7cm x 12cm x 2cm17. Weight: 69g18. Packing List:- SX1262 915MHz LoRa HAT x1- USB type A plug to micro plug cable x1- 915MHz antenna x1Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 15cm * 8cm * 2cm / 5.91inch * 3.15inch * 0.79inch Qty per Carton 400 Carton Weight 44.80kgs / 98.77lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 400 pcs = 110800 pcs40HQ: 644 cartons * 400 pcs = 257600 pcs
£22.99
-
Waveshare Waveshare RS485 CAN Shield, RS485 CAN Shield Designed for NUCLEO/XNUCLEO
OverviewThe RS485 CAN Shield will easily enable RS485/CAN communication functions for your NUCLEO/XNUCLEO Arduino boards.Features1. Arduino standard interfaces, compatible with Arduino boards like Arduino UNO, Leonardo, NUCLEO, XNUCLEO- When using with Arduino UNO, Leonardo, the CAN function is unavailable due to hardware limitation2. RS485 function, onboard transceiver SP3485/MAX3485, 3.3V power supply3. CAN function, onboard transceiver SN65HVD230, 3.3V power supplySpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 7cm * 6cm * 2cm / 2.76inch * 2.36inch * 0.79inch Qty per Carton 960 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 36cm * 40cm / 22.05inch * 14.17inch * 15.75inch Loading Container 20GP: 330 cartons * 960 pcs = 316800 pcs40HQ: 767 cartons * 960 pcs = 736320 pcs
£7.99
-
Waveshare Waveshare RGB Full-color LED Matrix Panel, 2.5mm Pitch, 64x32 Pixels, Adjustable Brightness, 23707, 23707
1. Pixel: 64 x 32=2048 dots2. Pitch: 2.5mm3. Pixel format: 1R1G1B4. Viewing angle: greater than 140 degrees5. Control mode: synchronous6. Drive: 1/16 scan7. Connector: HUB758. Power supply: V / 2.5A (VH4 connector input)9. Power: within 12W10. Size: 16 x 8cmFeatures:1. 2048 independent RGB led, full color display, adjustable brightness2. 64x32 pixels, 2.5mm pitch, allows displaying text, color images or animations 3. 160x80mm size, moderate size, suitable for DIY desktop display or wall mount display4. Two HUB75 headers on board, 1 for controller data input, 1 output, chain support5. Provide open source development resources (for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino, etc.)Specification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 20cm * 10cm * 2cm / 7.87inch * 3.94inch * 0.79inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs40HQ: 412 cartons * 74 pcs = 30488 pcs
£16.99
-
ANENG ANENG Automatic High-Precision Intelligent Digital Multimeter, AN9205A
1. Material: ABS2. Wire material: PVC/Brass3. DC voltage: 200mV-2V-20V-200V-1000V4. AC voltage: 200mV-2V-20V-200V-750V5. DC current: 20mA-200mA-20A6. Alternating current: 2m-20m-200m-20A7. Resistance measurement: 200-2k-20k-200k-2M-20MΩ-200 milliohms8. Capacitance measurement: 20nF-200nF-2uF-200uF9. Power measurement: Need to receive (mA) socket measurement10. 3 1/2 LCD display: 1999 count11. Automatic shutdown function: about 15 minutes later12. Drive power: 6F22 9V battery (not included)13. Complete anti-burn design14. Large angle display, easy to read15. PVC shockproof sleeve, double fuses, safe and reliable16. Cable length: 70 cm17. Dimensions: 180x90x35 mm18. Weight: 158.6 gramsPacking list- Digital multimeter x 1- Test lead x 1- User manual x 1Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12cm * 5cm * 20cm / 4.72inch * 1.97inch * 7.87inch Qty per Carton 40 Carton Weight 13.00kgs / 28.66lb Carton Size 50cm * 27cm * 42cm / 19.69inch * 10.63inch * 16.54inch Loading Container 20GP: 470 cartons * 40 pcs = 18800 pcs40HQ: 1091 cartons * 40 pcs = 43640 pcs
£3.99
-
SK-012 8GB Voice Recorder USB Professional Dictaphone Digital Audio With WAV MP3 Player VAR Function Record, SK-012 8GB
Features1. Built-in 250mAh battery, use time 25h. 2. One-key recording, with LCD recording indicator, easy to operate. 3. 6 recording modes, 3D sound effects, support voice activation function (VAR). 4. Support loop/A-B repeat/pause/delete. Equipped with a telephone adapter to support telephone conversation recording. 5. Small pocket size, good as MP3 music player. 6. Built-in microphone and speaker, with external microphone and earphone.Specification1. Recording format: WAV format 2. Recording power: 0.8mA-12mA 3. Recording sampling rate: 8KHz/16KHz/48KHz 4. Recording bit rate: WAV (32/128/192/384Kbps) 5. Music playback format: MP3, WAV 6. Headphone jack: 3.5pie stereo jack 7. Headphone output: (L) 9mW???(R) 9mW (32Ohm) max 8. USB interface: MICRO-Mike 5P/DC5V-300MAh 9. Storage: Embedded Flash 10. Built-in speaker output: 800mW 11. Built-in speaker: 8R/0.5W diameter 26 12. Built-in MIC: Omni-directional capacitor MIC 13. Display: 1.0 inches 14. Distortion: 90dB 15. Signal to noise ratio: 0.06% 16. Operating temperature: -10 to 40 degrees Celsius 17. Body weight: 32.5g (bare metal) 18. Body size: 85mm??36mm??14mm 19. Power supply mode: lithium battery/3.2-4.2V 20. Battery type: LiCoO2 21. Battery capacity: 250MAh 22. Battery weight (g): 4g 23. Watt hours per battery: 0.81wh 24. Lithium content: 0.066g 25. Battery size: 3.5mm x 14mm x 55mm 26. Battery life: about 30 hours of recording, about 6 hours of playback (plug in headphones) 27. Support system: Windows XP&Vista/2K/ME/98 (driver installation required) /Mac OS 10Package listRecorder x 1 Headphone x 1 Microphone x 1 USB cable x 1 Telephone adapter x 1 Telephone line cable x 1 Audio cable x 1 User Manual (English) x 1 Specification: General Certificate CE Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 13.5cm * 8cm * 5cm / 5.31inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 50cm * 28cm * 40cm / 19.69inch * 11.02inch * 15.75inch Loading Container 20GP: 476 cartons * 100 pcs = 47600 pcs40HQ: 1105 cartons * 100 pcs = 110500 pcs
£11.99
-
WAVESHARE WAVESHARE 34958 ESP32-C5 2.8 Inch IPS Capacitive Touch Display Development Board Integrated Dual-Band Wi-Fi & Bluetooth 5, 34958
1. Utilizing the ESP32-C5-WROOM-1 series module, equipped with a 32-bit RISC-V processor with a maximum frequency of 240 MHz2. Integrating 384KB SRAM, 320KB ROM, 8MB PSRAM and 32MB Flash, meeting the requirements for program execution, graphical interface and data storage3. Integrating 2.4GHz and 5GHz dual-band Wi-Fi, Bluetooth 5 (LE) and IEEE 802.15.4 (supporting Zigbee 3.0 and Thread) wireless communication, featuring excellent radio performance4. Built-in battery charging management module, with a reserved 3.7V MX1.25 lithium battery interface, allowing external battery connection for power supply5. Using Type-C interface, eliminating the need to worry about the orientation of insertion, improving user convenience and device compatibility6. Built-in 2.8-inch LCD screen, with a resolution of 240 x 320 pixels and 262K color7. Supports I2C interface control for capacitive touch and interrupts8. Exports UART, I2C and some IO interfaces, integrates full-speed USB serial port9. Built-in QMI8658 six-axis sensor, RTC clock sensor, SHTC3 temperature and humidity sensor and Micro SD card slot10. Supports flexible clock, various power modes for precise control, achieving low-power modes in multiple scenarios11. Built-in ES8311 audio codec chip, NS4150B power amplifier chip, microphone and speaker, enabling smooth gaming with Xiaozhi AI12. Supports ESP-IDF / Arduino development environments, with abundant resources and easy to get startedLCD screen parameters1. Display panel: IPS2. Display size: 2.8 inches3. Display resolution: 240 x 320 pixels4. Display color: 262K5. Communication interface: 4-wire SPI6. Driving IC: ST77897. Touch IC: CST35308. Touch type: capacitive sensing type9. Screen effective size: about 5.76 x 4.32 cmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 9cm * 5cm / 3.94inch * 3.54inch * 1.97inch Qty per Carton 108 Carton Weight 8.00kgs / 17.64lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 108 pcs = 50328 pcs40HQ: 1083 cartons * 108 pcs = 116964 pcs
£26.99
-
WAVESHARE WAVESHARE 35066 ESP32-C6 2.8 Inch IPS Capacitive Touch Display Development Board Ntegrated Wi-Fi 6, Bluetooth 5, 35066
1. Utilizing the ESP32-C6-WROOM-1 series module, equipped with a 32-bit RISC-V single-core processor with a clock frequency of up to 160 MHz, and a built-in 16MB Flash memory2. Integrating Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, featuring superior radio performance3. Equipped with a battery charging management module, with a reserved 3.7V MX1.25 lithium battery interface, allowing for external battery power supply4. Utilizing the Type-C interface, eliminating the need to worry about the orientation of insertion, enhancing user convenience and device compatibility5. Equipped with a 2.8-inch LCD screen, with a resolution of 240 x 320 pixels and 262K color6. Supports I2C interface control for capacitive touch and interrupts7. Exports UART, I2C, and some IO interfaces, integrating a full-speed USB serial port8. Equipped with QMI8658 six-axis sensor, RTC clock sensor, SHTC3 temperature and humidity sensor, and a Micro SD card slot, etc9. Supports flexible clocks and various power modes for accurate control, enabling low-power modes in multiple scenarios10. Equipped with ES8311 audio codec chip, NS4150B power amplifier chip, microphone and speaker, enabling smooth gaming with Xiaozhi AI11. Supports ESP-IDF / Arduino development environments, with abundant resources and easy to get started12. Packaging list: ESP32-C6-Touch-LCD-2.8 host x 1, SH1.0 12PIN connection cable 100mm x 1, SH1.0 4PIN connection cable 100mm x 2, 8-ohm 2W speaker x 1LC screen parameters:1. Display panel: IPS2. Display size: 2.8 inches3. Display resolution: 240 x 320 pixels4. Display color: 262K5. Communication interface: 4-wire SPI6. Driving IC: ST77897. Touch IC: CST35308. Touch type: capacitive sensing type9. Effective screen size: about 5.76 x 4.32 cmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 9cm * 5cm / 3.94inch * 3.54inch * 1.97inch Qty per Carton 108 Carton Weight 8.00kgs / 17.64lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 108 pcs = 50328 pcs40HQ: 1083 cartons * 108 pcs = 116964 pcs
£24.99
-
F998 Live Sound Card 16 Sound Effects Noise Reduction Mixers, F998
1. Function: Independent adjustment of mid, high and bass, 16 kinds of live sound effects/One-key switching of sound card mode/Bluetooth compatible wireless accompaniment.3. Brilliant and colorful lighting effects: LED lights, a variety of color changes, increase the indoor atmosphere.3. Bluetooth compatible: support Bluetooth compatible connection, can transmit accompanimentThrough mobile phone music, get rid of the shackles of wires.4. Noise reduction: using intelligent noise reduction chips, audio processing is faster and more stable, making the input voice clearer and without delay.5. Compatibility: Strong compatibility, suitable for mobile phones/computers. Can be used for DJ, music studio recording, etc.6. Material: Plastic7. Power supply: 800 mAh battery (included)8. Dimensions: 190 x 118 x 28 mmPacking list:Sound card x1English manual x1Charging cable x1Live line x1Accompaniment cable x1Specification: Package Weight One Package Weight 0.46kgs / 1.01lb One Package Size 22cm * 15cm * 8cm / 8.66inch * 5.91inch * 3.15inch Qty per Carton 60 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 60 pcs = 10620 pcs40HQ: 412 cartons * 60 pcs = 24720 pcs
£11.99
-
RETEVIS RETEVIS RTC27 Multi-function Six-Way Walkie Talkie Charger for Retevis RT27,, RTC27 EU Plug, RTC27 US Plug
1. It can charge six batteries or six radios at the same time.2. Able to control the charging process to ensure high efficiency.3. International universal self-switching (AC 100V-240V) power supply.4. Safe and reliable, with multiple safety protections.5. Suitable for large groups and labor-intensive activities (such as warehouses, property management, fixed assets, supermarkets and enterprises).6. Suitable for Retevis RT277. Input: 5V/4A8. Output: 4.2V9. Charging current: 500mA10. Size: 25 x 20 x 6cm11. Weight: 980g12. Adapter cable length: 143cmSpecification: Package Weight One Package Weight 1.26kgs / 2.77lb One Package Size 33cm * 21cm * 7cm / 12.99inch * 8.27inch * 2.76inch Qty per Carton 10 Carton Weight 13.95kgs / 30.75lb Carton Size 33cm * 42cm * 35cm / 12.99inch * 16.54inch * 13.78inch Loading Container 20GP: 549 cartons * 10 pcs = 5490 pcs40HQ: 1276 cartons * 10 pcs = 12760 pcs
£28.99 - £29.99
-
TTGO TTGO T-Internet-POE ESP3 Module Downloader Extension Board, Downloader Board
Hardware Specifications 1. Chipset: ESPRESSIF-ESP32-WROOM, LAN8720A Ethernet chip, SI 3404 power management chip 2. Flash: 4MB 3. PSRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: robot, rest 6. External device: TF card slot, C-type interface, PA2369NL 1825-S transformer, HR861153C Ethernet-POE interface 7. USB to TTL: CP 2104 8. Modular interface: SD card, UART, SPI, I2C, PWM, I2S, ADC 9. Satellite clock: 32.768 MHz crystal oscillator 10. Operating temperature range: -40 degrees Celsius to +85 degrees Celsius 11. Size: 70x52.3x17mm 12. Weight: 26.85g Power Specifications 1. Power input: -C type USB 5V 2. HR861153C Ethernet-POE interface: 50V 3. Working voltage: 2.7V-3.6V 4. Output current: about 1.2A 5. Charging current: 500 mA 6. USB: Type C USB Wi-Fi 1. Standard: FCC/CE-Red/IC/TELEC/KCC/SRRC/NCC (ESP 32 chip) 2. Protocol: 802.11 b/g/n (802.11n, acceleration 150 Mbps) A-MPDU and A-MSDU aggregation, support 0.4??S guard interval 3. Frequency range: 2.4GHz~2.5GHz (2400 m~2483.5M) 4. Transmit power: 22 dBm 5. Communication distance: 300 meters Bluetooth 1. Protocol: Complies with Bluetooth V4.2BR/EDR and BLE standards 2. Radio frequency: -97 dBm sensitivity nzif receiver class-1 class-2 class-3 emitter AFH 3. Audio: CVSD&SBC audio Software Specification 1. Wi-Fi mode: workstation/SoftAP/SoftAP+Station/P2P 2. Security mechanism: WPA/WPA 2/WPA 2-Enterprise/WPS 3. Encryption type: AES/RSA/ECC/SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development/sdk for user firmware development 6. Network protocol: IPv 4, IPv 6, SSL, TCP/UDP/HTTP/FTP/MQTT 7. User configuration: +instruction set, cloud server, Android/iOSapp 8. OS: FreeRTOSSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 15cm * 10cm * 1cm / 5.91inch * 3.94inch * 0.39inch Qty per Carton 300 Carton Weight 11.50kgs / 25.35lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 300 pcs = 281700 pcs40HQ: 2180 cartons * 300 pcs = 654000 pcs
£2.99
-
Electric Garage Door Controller Rolling Door Roll Gate Remote Control Plug-Chain Motor Receiver, without Cable
1. Material: plastic2. Size: about 14x9.7x4 cm3. Frequency: 433MHz4. Power supply: AC220V 50HZ5. Remote control distance: within 50 meters6. Chip model: ev15277. Power supply: contains 23A 12V lithium battery8. Scope of application: suitable for 8-hole 6-wire external motorFeatures:1. Universal type with eight holes and six wires, easy to connect2. The shell is made of reinforced plastic, which is environmentally friendly and durable, with strong compression resistance, anti-fall and anti-corrosion3. Device learning code + dial code dual decoding dual purpose, you can increase the number of handles at any time4. 2 read 20 million sets of passwords, can learn 20 different remote control handles, one-key fast switch, fast response speed5. The integrated superheterodyne module in the main board, the precision components are integrated in the sealed area, moisture-proof, high sensitivity, and increase the signal distanceAdd remote control, code matching and clearing methods:1. Learning remote control: Install the dial button on the left and right, dial back and forth 4 times continuously,Long press any button of the new remote control, the receiver indicator flashes quickly, and the learning is complete.2. Dial code: adjust up and down in sequence according to the dialing method3. Delete the remote control: Install the dial button on the left and right, dial back and forth 6 times continuously, the receiver indicator flashes quickly, and the code clearing can be successfulInstall left and rightOperation direction adjustment:1. Remote control switching method: press the stop button and the up button of the original handle at the same time and hold for two seconds, the indicator light of the remote control host will go out, at this time please release the up button, if the indicator light returns to light, release it again to stop Key, the host indicator light flashes quickly and then keeps on, the switch is successful2. Physical button method: install the dial button on the left and right and dial to the other sideSpecification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 20cm * 16cm * 6cm / 7.87inch * 6.3inch * 2.36inch Qty per Carton 60 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 60 pcs = 10620 pcs40HQ: 412 cartons * 60 pcs = 24720 pcs
£3.99
-
Waveshare Waveshare RS485 to Ethernet Converter, US Plug, RS485
RS485 to Ethernet Converter, Easy-to-use, High-speed, Low-power, High-stability, UpgradableOverviewThe RS485 TO ETH module provides an easy way to communicate between RS485 and RJ45 port Ethernet, it can be configured via webpage.Features1. M0 series 32-bit ARM processor, fast speed, high efficiency2. 10/100M Auto-MDI/MDIX ethernet interface, regardless of cross-over or straight-through cable3. Configurable RS485 baudrate (600bps~230.4Kbps), supports five parity check options: None, Odd, Even, Mark, Space4. Available working modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)5. Configurable via webpage, AT commands, serial protocol, and network protocol, provides configuration protocol which can be integrated to your own software6. Support customized heartbeat packets, make sure the connection is truthful, as well as for actively retrieving sensor data7. Support customized registration packets, auto passing the registered packet as identifier after the connection is established, so that different devices can be distinguished8. Support customized webpage, allows user to customize the module configuration page9. Support RFC2217-like protocol, be able to communicate with devices whose serial setting (baudrate, data bit, etc.) may change10. KeepAlive mechanism, detects broken connection, auto re-connecting11. Support time-out reboot (no-data reboot), ensures a long-term stable connection, configurable reboot time12. Support DNS domain name resolution, configurable DNS server13. Support DHCP, auto-obtained IP or static IP14. Firmware is upgradable via the network15. Restore to factory settings via software and/or hardware16. Comes with default MAC address, which is customizable17. Provided software: module configuration software, TCP/UDP testing tool, VCOM virtual serial port software18. Example code: host computer (socket ), VB, C++, Delphi, Android, iOS, etc.Specifications1. Ethernet:- Connector: 4-pin RJ45- Communication rate: 10/100Mbps- Interface protection: 1.5KV electromagnetic isolation- Protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client- TX cache: 6Kbyte- RX cache: 4Kbyte2. RS485:- Connector: screw terminal (A+, B-, GND)- Data bit: 5bit, 6bit, 7bit, 8bit- Stop bit: 1, 2- Parity bit: None, Odd, Even, Mark, Space- Baudrate: 600bps~230.4Kbps- RX cache: 800byte- Hardware flow control: none- Interface protection:- 2KV ESD protection- RS485 pull up/down registers: 2.2KΩ3. Power:- Power supply: 5.0~7.0V (5V recommended)- Operating current: 150mA (@5V)- Power consumption: <1W- Interface protection: reverse-proof, ESD protection, anti-surge4. Environment:- Operating temperature: -25~75 degree C- Storage temperature: -40~105 degree C5. Size: 69.65*63.59*25.47mmPackage Contents1. RS485 TO ETH x12. 5V power adapter x1Specification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 8cm * 7cm * 3cm / 3.15inch * 2.76inch * 1.18inch Qty per Carton 455 Carton Weight 121.94kgs / 268.83lb Carton Size 56cm * 35cm * 39cm / 22.05inch * 13.78inch * 15.35inch Loading Container 20GP: 348 cartons * 455 pcs = 158340 pcs40HQ: 809 cartons * 455 pcs = 368095 pcs
£26.99