Search results for "ev charging"
-
FOXSUR FOXSUR FJS-800 12V Car Multifunctional Wireless Charging Emergency Start Power Supply, FJS-800
1. Stable voltage, current, balance charge function. 2. 600A Starting current, 1200A Peak current. 3. 39800mAh large capacity. 4. Intelligent protection system, reverse connection protection. 5. Full power can be started 40 times. 6. Limit temperature: -20~60 degree Celsius 7. Input: 5V-2A 8. Output: 5V 2.1Ax2; 12V jump Start 9. Size: 170x85x40mm 10. Night emergency, Rescue lighting: - Built-in glare lighting system. - Long press the middle button for 3 seconds. Press again in burst mode. - After turning on the flashlight, press the switch again to become a flash,the switch is the distress mode. Specification: Package Weight One Package Weight 0.96kgs / 2.11lb One Package Size 28cm * 22cm * 5.5cm / 11.02inch * 8.66inch * 2.17inch Qty per Carton 20 Carton Weight 20.60kgs / 45.41lb Carton Size 48cm * 42cm * 32cm / 18.9inch * 16.54inch * 12.6inch Loading Container 20GP: 413 cartons * 20 pcs = 8260 pcs40HQ: 959 cartons * 20 pcs = 19180 pcs
£30.99
-
Kewig Kewig KWG-JY 20-90V To 12V Electric Vehicle Power Regulator Modified Car Charger Terminals, 250 Female Socket, SAE Plug
1. Built-in triple protection against overvoltage, overcurrent and short circuit, providing real-time monitoring and quick response. Efficient conversion with 95% energy efficiency, stable output of constant current2. Waterproof structure, unafraid of rain and wind3. Resistant to harsh environments, operating temperature range from -30 degrees Celsius to 50 degrees Celsius, ensuring stable and safe operation4. Widely applicable, suitable for use in headlights, spotlights, instruments, ABS, heated hand grips, horns, etc5. Outputs a stable 12V voltage, without sudden voltage increase, which will not cause product damage or burnout. The maximum current it can handle is 7A, and the maximum power it can support is suitable for charging devices6. The total bus length is 2 meters, with flexible interior layout7. Applicable vehicles: electric vehicles, electric motorcycles, charging vehicles, high-voltage installation, unstable mining vehicle voltage8. Input: DC 20V - 90V9. Output: 12V/7ASpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 14cm * 11cm * 5cm / 5.51inch * 4.33inch * 1.97inch Qty per Carton 63 Carton Weight 7.00kgs / 15.43lb Carton Size 44cm * 37cm * 35cm / 17.32inch * 14.57inch * 13.78inch Loading Container 20GP: 468 cartons * 63 pcs = 29484 pcs40HQ: 1086 cartons * 63 pcs = 68418 pcs
£7.99
-
MOMAX MOMAX UC18 30W Dual Port QC3.0 Car Fast Charger
1. It supports PD 30W/22.5W high output.2. Compatible SCP fast charging protocols.3. 12V/24V car model universal.4. Type-C+USB, fast charging 2 devices simultaneously.5. It has overcurrent, overvoltage, overload, overheat and short circuit protection6. Automatically recognizes any corresponding device you plug in and assigns you the best charging efficiency. 7. Aluminum material and venting design, which helps to improve the heat dissipation performance and always maintain the right working temperature. 8. Input: 12-24V/4A (Max)9. USB-A output: 5V/3A; 9V/2A; 12V/1.5A; 3.6~5.5V/4A10. USB-C output: 5V/3A; 9V/3A; 12V/2.5A11. Size: 4.7cmSpecification: Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 13cm * 9cm * 3.5cm / 5.12inch * 3.54inch * 1.38inch Qty per Carton 120 Carton Weight 8.80kgs / 19.40lb Carton Size 41cm * 38cm * 37cm / 16.14inch * 14.96inch * 14.57inch Loading Container 20GP: 462 cartons * 120 pcs = 55440 pcs40HQ: 1073 cartons * 120 pcs = 128760 pcs
£3.99
-
WUPP WUPP ZH-1422B1 DC12-24V Motorcycle Square Single USB + PD Fast Charging Charger with Switch + Voltmeter + Integrated SAE Socket, ZH-1422B1
1. Product material: ABS resistant to high and low temperature, flame retardant and environmentally friendly material 2. Input voltage: DC12-24V 3. Output voltage: USB output: 5V3.4A/9V2.5A/12V2A, PD output power: 20W, 5V3A/9V2.22A/12V1.67A 4. Monitorable voltage range: 6-30V 5. Product usage: It can be used to power most car-mounted products such as mobile phones, tablets, IPAD, navigation and GPS 6. Multiple protection functions Input over-voltage and under-voltage protection; output over-current, over-voltage, under-voltage, and short-circuit protection; overload protection; reverse connection protection; chip internal high-temperature protection 7. Product size: length 66.6mm, width 38mm, height 21.3mm 8. Product accessories: handlebar mounting bracket*1, screw mounting bracket*1, large screw*2, small screw*1, handlebar fixing screw*1, non-slip gasket*1 Performance advantages: 1. Two installation methods, handlebar installation and screw installation, meet the installation and use of most models on the market 2. The product design adopts an integrated SAE interface, which can be directly plugged with the SAE interface of the original car, making the installation more convenient 3. Comes with a waterproof and dustproof cover, IP66 waterproof rating, one waterproof cover, rain or shine 4. The product has an independent switch button, which can be turned on immediately after use, to avoid power consumption and easy to use 5. The product has a voltmeter display to monitor the voltage at any time. The body adopts ogo light, which looks beautiful and generous. 6. The product supports USB and PD fast charging, which is wider and more convenient 7. It can be installed on DC12V-24V vehicles, motorcycles, ATVs, SUVs, boats and other transportation tools, with a wide installation range; built-in power MOS, can provide 20W output power, and can automatically adjust the output voltage according to the fast charging protocol And current to adapt to the charging power of each mobile phone 8. The product has dual USB super fast charging ports, supports Type-C output and USB PD2.0/PD3.0 (PPS) protocol; supports 5V 3.4A/ 9V 2.5A / 12V 2A three output solutions, support The fast charging protocols are: DCP (applicable to Apple and BC1.2), Qualcomm QC2.0/QC3.0, applicable to Huawei fast charging protocol FCP and high-voltage SCP, applicable to Samsung fast charging protocol AFC (MAX 12V), MTK PE+1.1 and MTK PE+2.0 can automatically identify the fast charging protocol supported by the device connected to the output terminal (if the mobile phone itself does not support fast charging, the charger does not support fast charging protocol)Specification: Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 8cm * 6cm * 12cm / 3.15inch * 2.36inch * 4.72inch Qty per Carton 80 Carton Weight 9.74kgs / 21.47lb Carton Size 40cm * 24cm * 48cm / 15.75inch * 9.45inch * 18.9inch Loading Container 20GP: 578 cartons * 80 pcs = 46240 pcs40HQ: 1343 cartons * 80 pcs = 107440 pcs
£8.99
-
For Club Car DS Golf Cart 48V Charging Outlet 101802101
MIRA SALES • PREMIUM PRODUCT GUIDE Club Car DS Golf Cart 48V Charging Outlet A replacement charging outlet component for compatible Club Car DS golf cart applications. It is designed as a practical replacement part where the original charging outlet is damaged, worn or needs to be renewed. ✨ PRODUCT HIGHLIGHTS Club Car DS golf cart; 48V charging systemDesigned for 48V charging applications • Plastic and metal construction • Integrated fuse/socket assembly • Metal terminals for electrical contact • Vehicle-specific replacement component 🔎 PRODUCT OVERVIEW A replacement charging outlet component for compatible Club Car DS golf cart applications. It is designed as a practical replacement part where the original charging outlet is damaged, worn or needs to be renewed. The design is focused on practical everyday use, clear functionality and a polished presentation. The product photographs below provide a visual reference for its construction, proportions and available configuration. For the best experience, choose the correct model, size, generation or configuration before ordering. Where compatibility matters, compare the exact specifications of your device or setup rather than relying only on a general category. ⭐ KEY FEATURES 01Designed for 48V charging applications 02Plastic and metal construction 03Integrated fuse/socket assembly 04Metal terminals for electrical contact 05Vehicle-specific replacement component 🎨 DESIGN & FINISH The product has been presented with a clean, premium visual layout so customers can understand both its appearance and purpose at a glance. Its form factor is designed around the practical requirements of Club Car DS golf cart; 48V charging system, while the listed features focus on convenient everyday handling. 📋 PRODUCT DETAILS Compatibility / Application: Club Car DS golf cart; 48V charging system Key specifications: Designed for 48V charging applications; Plastic and metal construction; Integrated fuse/socket assembly; Metal terminals for electrical contact; Vehicle-specific replacement component. Selection: Check the available product variants and choose the option that matches your exact requirement. 💎 WHY YOU'LL LIKE IT This product combines a purpose-built design with practical everyday functionality. It is a strong fit for customers who want a dedicated solution with a clean appearance, useful features and a straightforward user experience. 🎯 BEST FOR Club Car DS golf cart; 48V charging systemIdeal for customers who value practical functionality, attractive design and a product that fits naturally into their existing setup. 📸 PRODUCT PHOTOS Medium-size images are used here for a cleaner premium presentation. Hover over an image to see a subtle visual lift and zoom effect. 🛍 MIRA SALES TIP Before ordering, double-check the exact device model, connector, voltage, dimensions, installation method or intended application where relevant. Choosing the correct configuration first helps avoid compatibility problems. ✅ BEFORE YOU ORDER Check exact compatibility with your device or application. Select the correct available variant, colour or configuration. Review the product photographs for visual confirmation. For electrical, vehicle, repair or specialist products, follow appropriate safety guidance. Mira Sales • Premium Product PresentationClear specifications, attractive presentation and practical product photography — all designed to make product selection easier.
£18.99
-
Car Battery Jumper Starter, 0.7cm, 1.2cm
1. Scope of application: widely used in cars, RVs, yachts, RVs, ships, UTVs, ATVs, etc.2. Simple product, easy to install3. Simple to use, more convenient and safe to charge4. This product is resistant to dirt, water, dust and sand, and can be used for many years5. Plastic insulation cap, easy to open and close, snap into place, never fall off or accidentally archSpecification: Package Weight One Package Weight 1.50kgs / 3.32lb One Package Size 25cm * 20cm * 10cm / 9.84inch * 7.87inch * 3.94inch Qty per Carton 20 Carton Weight 31.00kgs / 68.34lb Carton Size 52cm * 50cm * 32cm / 20.47inch * 19.69inch * 12.6inch Loading Container 20GP: 320 cartons * 20 pcs = 6400 pcs40HQ: 744 cartons * 20 pcs = 14880 pcs
£23.99 - £31.99
-
YX For DJI Mavic 4 Pro YX Dual-Channel Charger Battery Manager Simultaneous Charging Station, Dual-Channel
1. Suitable for the DJI Mavic 4 Pro Charger Battery Hub. Input PD 100W+. Two batteries can be fully charged simultaneously in just 90 minutes.2. Intelligent Matching Safety Assurance:-- PD 65W or greater: Charge the lower-charged battery to the same level as the higher-charged battery first, then fully charge both batteries simultaneously.-- PD 65W or less: Charges in Charge Hub mode, starting from highest to lowest charge.3. Three Operating Modes:-- Storage Mode: Charges batteries below 60% to 60-65% for long-term storage. (Note: In this mode, batteries above approximately 60% will not be charged.)-- Full Charge Mode: Fully charges the battery.-- Discharge Mode: Converts the Mavic 4 Pro battery into a power bank, charging USB devices, remote controls, or mobile phones. (Mavic 4 Pro batteries are not included.)4. Comprehensive LED Lights: Charging Indicator, Operating Mode, Input Power Indicator, and Temperature Indicator.Parameters:1. Charging Temperature: 0-40 degrees Celsius2. Input Voltage: 5V-15V/3A; 20V/5A3. DC Output: 17.2V/7A (Max)4. USB Output: 5V/2.0A (Max)5. Net Weight: 108g (including charging cable)6. Dimensions: 11.7 x 10 x 4.8cmPackaging Contents: Charger x 1, USB-C to USB-C Charging Cable x 1Specification: General Compatible with DJI: Mavic 4 Pro Package Weight One Package Weight 0.17kgs / 0.38lb One Package Size 15cm * 13cm * 8cm / 5.91inch * 5.12inch * 3.15inch Qty per Carton 45 Carton Weight 8.80kgs / 19.40lb Carton Size 41cm * 35cm * 37cm / 16.14inch * 13.78inch * 14.57inch Loading Container 20GP: 502 cartons * 45 pcs = 22590 pcs40HQ: 1165 cartons * 45 pcs = 52425 pcs
£22.99
-
FOXSUR FOXSUR Smart 6V/12V 1.5A Battery Charger 4AH-30AH Lead Acid Battery Maintainer For Motorcycle/Car/ATV, EU Plug, US Plug, UK Plug
1. Safety Assurance: This intelligent trickle charger is specifically designed for the automatic charging and maintenance of Lead-Acid + LiFePO4 batteries. It incorporates multiple protection mechanisms against reverse polarity, short circuit, over-voltage/over-current, over-charge/discharge, overload, and overheating, ensuring safe and reliable operation.2. Easy to Use & Portable: With an input voltage range of 100–240V, this trickle charger is compact and lightweight for easy portability and storage. Once turned on, a 16-hour safety timer begins its countdown. This feature is designed to prevent battery overcharging.3. Wide Compatibility: This 6V/12V smart battery charger is compatible with a wide range of vehicles and equipment, including cars, motorcycles, ATVs, RVs, powersport vehicles, boats, scooters, golf carts, lawn mowers, etc. It is compatible with all 6V/12V Lead-Acid, SLA, VRLA, GEL, AGM, and Wet batteries.4. Pulse Repair, Revitalizes: Equipped with advanced battery repair technology, it helps restore the performance of old/idle batteries and extends battery life.5. 6V/12V Voltage Selectable: The charger automatically detects battery voltage when connected. However, for severely discharged batteries, the voltage reading may be inaccurate. In such cases, press and hold the MODE button for five seconds to manually switch between 6V and 12V. Specifications:1. Input Voltage: 100-240V AC 50/60Hz 25W 2. Charging Voltage: 6V Battery: 7.4V, 12V Battery: 14.8V (Measurement Tolerance +/-0.3V)3. Output Voltage: 6V/12V Auto Switching 4. Charging Current: Max 1.5A 5. Operating Temperature: -20 to +45 degrees Celsius6. Cooling Method: Natural CoolingSpecification: Package Weight One Package Weight 0.35kgs / 0.78lb One Package Size 23cm * 12cm * 7cm / 9.06inch * 4.72inch * 2.76inch Qty per Carton 50 Carton Weight 14.30kgs / 31.53lb Carton Size 49cm * 43cm * 28cm / 19.29inch * 16.93inch * 11.02inch Loading Container 20GP: 452 cartons * 50 pcs = 22600 pcs40HQ: 1049 cartons * 50 pcs = 52450 pcs
£4.99
-
Xiaomi Original Xiaomi CC07ZM 100W Dual Ports USB + USB-C / Type-C Car Charger Fast Charging Version 1A1C, 100W
1. Output interface: USB-A / USB-C 2. Input parameters: 12V-24V/9.5A 3. USB-A output: 5V/3A 9V/2A 4. USB-C output: 20V/5A max 5. Dual ports output: 68W max 6. Product size: 75.15x33.3x33.3mm 7. Packing list: -1 x CC07ZM car charger -1 x USB cable -1 x ManualSpecification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 50cm * 20cm / 20.47inch * 19.69inch * 7.87inch Loading Container 20GP: 512 cartons * 100 pcs = 51200 pcs40HQ: 1190 cartons * 100 pcs = 119000 pcs
£14.99
-
For Tesla Model 3 / X / S / Y Car Charger Wall Storage Bracket, EU Plug, US Plug
1.Material: ABS, PP2. Frosted surface, beautiful and wear-resistant3. Made of high-quality materials, sturdy and durable4. Mold opening based on original vehicle data and accurate hole positions5. Two specifications, you can choose according to the situation6. Simple installation and convenient operation7. Wall-mounted design saves space and can store charging cables8. Product net weight: 129 grams9. Applicable models: for Tesla Model 3/Y/S/XPacking list:-Bracket x 1-Base x 1-Screws x 13-Sticker x 1Specification: Package Weight One Package Weight 0.39kgs / 0.87lb One Package Size 22cm * 10cm * 7cm / 8.66inch * 3.94inch * 2.76inch Qty per Carton 10 Carton Weight 5.00kgs / 11.02lb Carton Size 24cm * 22cm * 37cm / 9.45inch * 8.66inch * 14.57inch Loading Container 20GP: 1365 cartons * 10 pcs = 13650 pcs40HQ: 3168 cartons * 10 pcs = 31680 pcs
£6.99
-
Qc3.0 Dual USB Car Charger + Micro USB Fast Charging Cable Car Charging Kit, Micro USB (White), Micro USB (Black)
1. Input: dc12v-30v2. Power: 30W3. Total output current: 6A4. Qc3.0 output: 5V / 3.1a; 9V / 2A; 12V / 1.6A5. USB2.0 output: 5V / 3.1a.6. Micro USB cable parameters: 1 meter long, 3A fast charging, 480mbps data transmission. It can be used in all mobile phones and tablets with Android micro USB.7. Product features: This is a fast charger for vehicles, including one USB3.0 interface, which can charge 5V-12V voltage; there is also a USB2.0 interface, which is suitable for fast charging of all mobile phones and tablet electronic products such as iPhone, Huawei, Samsung, Xiaomi, oppo, etc. It is the first choice for digital products in vehicle charging.Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 13cm * 8.5cm * 3.5cm / 5.12inch * 3.35inch * 1.38inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 90cm * 62cm * 27cm / 35.43inch * 24.41inch * 10.63inch Loading Container 20GP: 176 cartons * 404 pcs = 71104 pcs40HQ: 410 cartons * 404 pcs = 165640 pcs
£4.99 £1.99
-
Electric Car Fireproof Charger Storage Bag, Material:, Square Flame Retardant, Rectangular Oxford Cloth
MIRA SALES • PREMIUM PRODUCT GUIDE Electric Car Fireproof Charger Storage Bag Keep EV charging cables and small charging accessories organised, protected and easier to carry with a dedicated storage bag designed around modern electric-car charging needs. ✨ AT A GLANCE Dedicated storage for EV charging leads and accessories • Square flame-retardant configuration available • Rectangular Oxford-cloth configuration available • Helps keep charging equipment organised and easier to transport 🔎 PRODUCT OVERVIEW Keep EV charging cables and small charging accessories organised, protected and easier to carry with a dedicated storage bag designed around modern electric-car charging needs. This product is built around a clear everyday purpose, combining practical functionality with a clean, attractive form. The design and configuration shown on this page are intended to make the product straightforward to understand and easy to integrate into the relevant setup. Whether you are replacing an older accessory, improving an existing setup, preparing for travel, organising equipment or carrying out a repair, selecting the correct configuration is important. Review the compatibility information and product photographs carefully before ordering. ⭐ KEY FEATURES FEATURE 01 Dedicated storage for EV charging leads and accessories FEATURE 02 Square flame-retardant configuration available FEATURE 03 Rectangular Oxford-cloth configuration available FEATURE 04 Helps keep charging equipment organised and easier to transport 🛠 DESIGNED FOR PRACTICAL EVERYDAY USE Available in different material and shape configurations, allowing customers to select the format that best suits their charging setup. The product's form factor has been presented to highlight its intended use while keeping the overall experience practical and convenient. The accompanying photographs provide a closer look at the physical design and available configuration. For the best experience, use the product only for its intended purpose and follow any relevant device, manufacturer or safety guidance. Where compatibility matters, compare your exact device, connector, dimensions or configuration rather than relying only on a general category description. 📋 PRODUCT DETAILS Compatibility / Application: Electric vehicle charging cables and compatible charging accessories Key Specifications: Dedicated storage for EV charging leads and accessories; Square flame-retardant configuration available; Rectangular Oxford-cloth configuration available; Helps keep charging equipment organised and easier to transport. Product Design: Purpose-built for the application described above with an emphasis on practical handling and everyday convenience. Configuration: Select the correct available variant where multiple options are offered. 💎 WHY YOU'LL LIKE IT The product brings together useful functionality and a purpose-built design in a format that is easy to understand and use. It is particularly suited to customers who prefer a dedicated solution with clearly defined features rather than a generic alternative. 🎯 BEST FOR Electric vehicle charging cables and compatible charging accessories. It is a practical addition for customers who want the functionality, convenience and appearance described above. 📸 PRODUCT PHOTOS Explore the product photographs below for a closer look at the design, construction and available configuration. Images are displayed at a comfortable medium size. 🛍 MIRA SALES TIP Take a moment to verify the exact model, generation, dimensions, connector, installation method, colour or configuration relevant to your purchase. Choosing the correct variant first helps avoid compatibility issues and ensures the product matches your intended setup. ⚠ IMPORTANT INFORMATION Product specifications and compatibility can vary by device, variant and application. Always confirm the information relevant to your setup before ordering. Specialist repair parts should be installed by appropriately experienced users or technicians. Electrical and vehicle-related products should be used according to applicable safety guidance. For the rolling accessory, use only for lawful purposes and comply with applicable local regulations. ✅ BEFORE YOU ORDER Check compatibility with your exact device or application. Select the correct variant, colour, generation or configuration. Compare connector types and physical dimensions where relevant. Use the product photographs as a visual reference. Follow appropriate manufacturer and safety guidance for specialist products. Mira Sales • Practical Products. Clear Information. We bring the important product information, compatibility guidance and product photography together so you can understand the product clearly before ordering.
£2.99 - £3.99