Search results for "study electronics"
-
FNIRSI FNIRSI 2 in 1 Dual-channel 100M Bandwidth Digital Oscilloscope 1GS Sampling Signal Generator, US Plug, 1014D, 1014D +P4100 Probe
1. The oscilloscope has a real-time sampling rate of 1GSa/s and an analog bandwidth of 100MHz x 22. Complete trigger function (single/normal/automatic), both periodic analog signal and non-periodic digital signal can be used freely3. Built-in DDS function signal generator and the industrys original chopping output (@2.5vpp), all signal frequency steps are 1Hz, support 14 kinds of standard function signals and a customizable chopping signal, the chopping output device intercepts part or all signals4. The complex signal measured by the oscilloscope is used as the output signal of the signal generator, which can store up to 1000 custom cut-off signals5. The built-in high-voltage protection module can withstand continuous voltage up to 400V, so there is no need to worry about the oscilloscope burning accident caused by the probe not moving to the 10x position7. Large time base scrolling method, which can monitor slow level changes8. Equipped with an efficient one-key automatic display of measurement waveforms, without cumbersome adjustments9. 7-inch 800x480 resolution high-definition LCD display10. Cursor measurement function, when manually reading the amplitude and frequency parameters, there is no need to read the background scale unit and quantity, no need to convert, and directly obtain the peak-to-peak value and frequency. Very convenient screen capture and waveform storage function10. Built-in 1GB storage space, can store 1000 screenshots + 1000 sets of waveform data, the storage process is simple and fast, save the current waveform with one key11. Powerful waveform image manager, supports thumbnail browsing, viewing, viewing details, page turning, deletion, and waveform zooming in, zooming out, moving, etc., which is convenient for secondary analysis12. The fuselage is equipped with a USB interface, which can be connected to a computer to realize the sharing of screenshots and pictures of itself, which is convenient for secondary analysis13. Graphical display function, which can compare and judge the amplitude, frequency and phase of two groups of signals14. The FFT viewing function can estimate the harmonic components of the signal15. Built-in DDS signal generator, supports 12 kinds of function signals16. For high intelligent decoding algorithm, the encoder has unlimited life, intelligent anti-burn function, 1X can withstand 400V withstand voltage17. With 100MHz x 2 analog bandwidth and @1GSa/s sampling rate (1X = 5MHz, 10X = 100MHz)18. High measurement voltage range: 1X can measure 0~40V, 10X can measure 0~400V19. Up to 12 parameters measurement: VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time-, Period20. Cursor measurement function: convenient for manual measurement of period, frequency and voltage =21. Perfect trigger function (single, normal, automatic), freeze waveform display at any time (pause function)22. With screen brightness adjustment function and background grid brightness adjustment function, easy to carry23. Material: ABS24. Analog log bandwidth: 100MHz x 225. Number of channels: 2 channels26. Real-time sampling rate: 1GSa/s27. Vertical sensitivity: 50 mV/div ~ 500 V/div28. Horizontal time base range: 50S/div~10nS/div29. Test voltage: 40 V (1X probe), 400 V (10X probe)30. Storage depth: 240Kbit31. Input resistance: 1 milliohm32. ADC precision: 8bits33. Coupling method: AC/DC34. Trigger mode: single, normal, automatic35. Trigger edge: rising edge/falling edge36. External trigger voltage: 0~40 V37. Expansion port: USB image exportPacking list:FNIRSI-1014D Oscilloscope host x 1Matched 100MHz probes (1X and 10X) x 2Clip x 1US power adapter x 1USB cable x 1English user manual x 1P4100 probe (optional) x 1Specification: Package Weight One Package Weight 2.61kgs / 5.76lb One Package Size 37cm * 20cm * 13cm / 14.57inch * 7.87inch * 5.12inch Qty per Carton 2 Carton Weight 4.30kgs / 9.48lb Carton Size 39cm * 22cm * 28cm / 15.35inch * 8.66inch * 11.02inch Loading Container 20GP: 1110 cartons * 2 pcs = 2220 pcs40HQ: 2576 cartons * 2 pcs = 5152 pcs
£124.99 - £138.99
-
DC12V 1CH RF Remote Control Switch / 10A Relay / 433MHZ Switch Receiver
Product Features1. Output relay switching capability: Capable of controlling loads with voltages up to 250V. Requires a 12V power supply. 2. Small Size: The circuit board measures only 35x30x17mm. 3. User-Adjustable Operating Mode: Self-locking, interlocking, inching, and time-delay modes can be adjusted via pin short-circuit caps. 4. Learning Pairing: You can learn to pair with any remote controller with the same frequency (dont worry if you lose your remote during use; simply buy a new one and learn the code without having to replace the entire set, significantly saving costs).Technical Parameters1. Operating Voltage: DC 12V (3V/6V/9V/24V available on request) 2. Quiescent Current: Less than or equal to 10mA 3. Operating Temperature: -40 degrees Celsius to +80 degrees Celsius 4. Receiver Sensitivity: More than or equal to -95dB 5. Operating Frequency: Commonly 315MHz, 433.92MHz (other frequencies available on request) 6. Output Current: Less than or equal to 10A 7. Operating Mode: Inching, Self-Lock, Interlock, Delay (Adjustable) 8. Output Mode: Contact Output (AC and DC controllable)ApplicationsThis product uses an intelligent microprocessor control system and is suitable for garage door control, lighting control, remote curtain control, access control systems, and various motor control systems. It features a compact size, easy installation, and safe and reliable operation.Learn How to Pair Code1. Inching Learning Method: Press the pairing button on the control panel once. The LED indicator will flash once. Then, press the button on the remote control to be paired. The LED indicator on the control panel will flash several times, indicating successful pairing. 2. Self-locking Learning Method: Press the pairing button on the control panel twice. The LED indicator will flash twice. Wait until the LED indicator turns off. Then, press the button on the remote control to be paired. The LED indicator on the control panel will flash several times, indicating successful pairing. 3. Interlocking Learning Method: Press the pairing button on the control panel three times. The LED indicator will flash three times. After the LED indicator turns off, press the A and B buttons on the remote control to be paired. The LED indicator on the control panel will flash several times, indicating successful pairing. 4. 5-Second Delay Learning Method: Press the control panel pairing button 4 times in a row. The LED indicator will flash 4 times. After the LED indicator goes off, press the button on the remote control you want to pair. The control panel LED indicator will flash several times, indicating successful pairing. 5. 10-Second Delay Learning Method: Press the control panel pairing button 5 times in a row. The LED indicator will flash 5 times. After the LED indicator goes off, press the button on the remote control you want to pair. The control panel LED indicator will flash several times, indicating successful pairing. 6. 15-Second Delay Learning Method: Press the control panel pairing button 6 times in a row. The LED indicator will flash 6 times. After the LED indicator goes off, press the button on the remote control you want to pair. The control panel LED indicator will flash several times, indicating successful pairing.Precautions1. Do not operate with power on. Always turn off the power before operating. Only power on after confirming that everything is working properly. 2. If the remote control battery voltage is low, please replace the batteries immediately. (A low battery voltage in the remote control generally reduces the control range.) 3. When using wireless electronic products, avoid strong interference sources such as metal covers, large electronic devices, and electromagnetic fields to prevent the remote control from being too close to the receiver or causing it to malfunction. 4. Do not use this electronic product improperly. Improper use can reduce product performance and lifespan, and in severe cases, damage the product and pose a safety hazard. 5. The delay time setting is automatically set when entering learning mode. The delay time setting is linked to the number of times the learning button is pressed. Please pay special attention to this.Specification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 7cm * 6cm * 3cm / 2.76inch * 2.36inch * 1.18inch Qty per Carton 100 Carton Weight 5.50kgs / 12.13lb Carton Size 36cm * 25cm * 10cm / 14.17inch * 9.84inch * 3.94inch Loading Container 20GP: 2962 cartons * 100 pcs = 296200 pcs40HQ: 6878 cartons * 100 pcs = 687800 pcs
£3.99
-
WAVESHARE Waveshare HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping
Features1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano 2. Onboard dual HR8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use 3. 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step 4. Adjustable motor drive current via potentiometer, maximum 2.5A current output 5. Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO) 6. Integrates 5V regulator, allows providing power to Raspberry Pi 7. Onboard multi connector options for stepper motors in different specifications 8. Comes with development resources and manual (examples in BCM2835, wiringPi, and python)Specifications1. Motor controller: HR8825 2. Motor drive voltage: 8.2V~28V 3. Motor drive current: 2.5A 4. Logic voltage: 3.3V 5. Mounting hole size: 3.0mm 6. Size: 65 x 56mmPackage List1. Stepper Motor HAT (B) x 1 2. RPi screws pack (2pcs) x 1 3. Aluminum heatsink x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs40HQ: 1314 cartons * 200 pcs = 262800 pcs
£12.99
-
Waveshare CM5 Gigabit/2.5G Dual Ethernet Multi-Function Expansion Board Supports RS485 Industrial Communication, 4G / 5G Module And 4K Display Output, Waveshare 34251
1. CM5 card slot: compatible with all versions of Compute Module 52. Networking: 1000M Ethernet RJ45 port x 1; 2500M Ethernet RJ45 port x 13. Video: HDMI port x 1, supporting 4K output4. USB: USB 2.0 port (Type-C) x 1; USB 2.0 port (Type-A) x 1; USB 3.2 Gen1 port (Type-A) x 15. M.2: M.2 M KEY (PCIe Gen2/3 x 1, supporting 2230 / 2242 / 2280 NVMe or AI modules); M.2 B KEY, supporting 4G / 5G communication modules6. Storage: onboard Micro SD card slot (for CM5 versions without eMMC)7. Serial interface: RS485 x 48. Digital input: digital input x 1 (input voltage: 5V - 36V)9. Relay: allowable load: less than or equal to 10A 250V AC or less than or equal to 10A 30V DC10. Fan interface: 5V, 4-pin JST-SH PWM fan connector11. Beeper: single-channel controllable12. Others: onboard encryption chip13. Power input: 7V - 36V wide voltage (terminal block + round hole) or 5V 5A (Type-C)14. Size: about 13.25 x 11.22 x 3.45 cmBase plate packing list:- CM5-ETH-RS485-4G-BASE x 1- Screw cap x 1Specification: Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 16cm * 14cm * 6cm / 6.3inch * 5.51inch * 2.36inch Qty per Carton 96 Carton Weight 13.00kgs / 28.66lb Carton Size 50cm * 38cm * 30cm / 19.69inch * 14.96inch * 11.81inch Loading Container 20GP: 467 cartons * 96 pcs = 44832 pcs40HQ: 1086 cartons * 96 pcs = 104256 pcs
£56.99
-
Waveshare Waveshare XCore407I, STM32F4 Core Board
Overview1. XCore407I is an STM32 MCU core board that features the STM32F407IGT6 on board.2. Clock circuit, USB power management3. Onboard devices: USB HS PHY, Ethernet PHY, 1G Bit NandFlash4. Connectors:USB HS (mini / type A), USB FS (mini), Ethernet (RJ45)5. All the idle I/O ports are accessible on the pin headers6. 2.0mm pin header pitch, smaller size, easier to integrate into user system7. Note : please consider the EVK407I, which supports easily programing/debugging.What is On BoardSTM32F407IGT6 development board on board resource1. STM32F407IGT6: The high performance STM32 MCU which features:- Core: Cortex-M4 32-bit RISC- Feature: a full set of single-cycle DSP instructions- Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz- Operating Voltage: 1.8V-3.6V- Package: LQFP176- Memories: 1024kB Flash, 192+4kB SRAM- MCU communication Interfaces:-- 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C-- 1 x FSMC, 1 x SDIO, 2 x CAN-- 1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY-- 1 x 10/100 Ethernet MAC-- 1 x 8 to 14-bit parallel camera interface- AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)- Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP2. MIC2075-2, onboard USB FS power management device3. AMS1117-3.3, 3.3V voltage regulator4. K9F1G08U0E, 1G Bit NandFlash5. DP83848, Ethernet PHY6. MIC2075-1, onboard USB HS power management device7. USB3300, USB HS PHY8. Power supply switch, powered from 5Vin or USB connection9. Boot mode switch, for configuring BOOT0 pin10. Power indicator11. USB FS LED12. USB HS LED13. Reset button14. 8M crystal, MCU clock, enables the MCU run at higher speed by frequency multiplication15. 24M crystal, USB3300 clock16. 50M crystal, DP83848 clock17. 32.768K crystal, for internal RTC with calibration18. Ethernet connector19. USB FS mini connector20. USB HS mini connector21. USB HS type A connector22. MCU pins expander, VCC, GND and all the idle I/O ports are accessible on expansion connectors for further expansion23. USB OTG/HOST jumper24. VREF/VBAT jumper25. Ethernet I/O selection solder joint26. USB HS I/O selection solder joint27. PDR selection solder joint: 1.8-3.6V, -40~105℃ OR 1.7-3.6V, 0~70℃Package Contents1. XCore407I development board x 12. USB type A to Mini-B cable x 13. Software CD x 1Specification: Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 15cm * 8cm * 3cm / 5.91inch * 3.15inch * 1.18inch Qty per Carton 260 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 39cm / 23.62inch * 15.75inch * 15.35inch Loading Container 20GP: 284 cartons * 260 pcs = 73840 pcs40HQ: 661 cartons * 260 pcs = 171860 pcs
£41.99
-
HK1 RBOX-H8S 4K Ultra HD Android 12.0 Smart TV Box with Remote Control, Allwinner H618 Quad-Core, 2GB+16GB, 2GB+16GB
Features1. CPU: Allwinner H618 Quad Core ARM Cortex A53 1.5GHZ 2. GPU: Mali G31 MP2 3. RAM: 2GB DDR3 4. ROM: 16GB EMMC 5. External Storage: Support USB Storage Devices 6. Operating system: Android 12 7. Language: Multi-Language 8. Video Decoder: - H265 Main10 L5.1 decoder up to 4K 60fps or 6K 30fps - VP9 Profile 2 decoder up to 6K 30fps - AVS2 Jizhun 10bit decoder up to 4K 60fps - H.264 BP/MP/HP L4.2 decoder up to 4K 30fps - Multi-format 1080p 60fps video playback formats,including H.264 BP/MP/HP , H 263 BP , VP8 , MPEG-1 MP/HL ,MPEG-2 MP/HL , MPEG-4 SP/ASP L5 , AVS +/AVS JizhunWMV9/VC1, etc 9. Video Encoder: H.264 BP/MP/ HP encoder up to 4K 25fps or 1080p 60fps JPEG snapshot performance of 1080p 60fps 10. Audio: MP3, AAC, WMA, FLAC, Ogg. 11. Image: HD JPEG, BMP, GIF, PNG, TIF 12. Wi-Fi Type: IEEE802 a/b/g/n, 2.4GHz, 5.8GHz 13. Antenna Type: Inside antennas 14. BT: BT4.0+ 16. Interface: - Charge: DC connector: DC 5V- 2A - Video output: 1 x 4K 2K Output, HDMI 2.0a - Ethernet: 1 x Default 100M - TF Card External memory: 1 x TF Card - USB port: 2 x USB 2.0 17. Upgrade KEY: OTA Update online 18. Others: Support Email, office suit, HDD, U Disck, 2.4G wireless mouse/keyboard etc. 19. Body Material: Plastic 20. Size: 108 x 108 x 26mm 21. Weight: 135gPackage List1. TV Box x 1 2. Remote control x 1 3. HDMI external cable x 1 4. Power adapter x 1 5. User manual x 1 6. Gift box x 1Specification: General Model HK1 RBOX-H8S Size 108 x 108 x 26mm Weight 135g Hardware CPU Allwinner H618 Quad Core ARM Cortex A53 1.5GHZ GPU Mali G31 MP2 External Memory TF Card up to 256GB (not included) RAM 2GB ROM 16GB System OS Android 12 Wifi IEEE802 a/b/g/n, 2.4GHz & 5.8GHz Bluetooth 4.0 Ethernet 100M Multimedia Audio Format MP3, WMA, OGG, AAC, FLAC Video Format MPEG-4, MPEG-1, MPEG-2, H.264 Picture Format BMP, PNG, GIF, TIF, JPEG Package Include Package Contents 1 x Box 1 x HDMI cable 1 x User manual 1 x Remote Controller 1 x Power Supply Package Weight One Package Weight 0.33kgs / 0.72lb One Package Size 19cm * 14cm * 6cm / 7.48inch * 5.51inch * 2.36inch Qty per Carton 20 Carton Weight 7.50kgs / 16.53lb Carton Size 40cm * 29cm * 28cm / 15.75inch * 11.42inch * 11.02inch Loading Container 20GP: 821 cartons * 20 pcs = 16420 pcs40HQ: 1905 cartons * 20 pcs = 38100 pcs
£26.99
-
RFID-RC522 DIY Safety Key Fob Sensor RF IC Card Module Board
Main Features: 1. Working current: DC 3.3V / 13 - 26mA 2. Idle current: DC 3.3V / 10 - 13mA 3. Sleep current: < 80uA 4. Peak current: < 30mA 5. Working frequency: 13.56MHz 6. Supports card: Mifare1 S50, mifare1 S70, mifare Ultralight, mifare Pro, mifare Desfare 7. Application: Various electronic products and DIY projectsSpecification: General Model RFID-RC522 Material Plastic Size 12*8.0*2.0 cm Weight 80 g Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 12cm * 8cm * 2cm / 4.72inch * 3.15inch * 0.79inch Qty per Carton 200 Carton Weight 18.40kgs / 40.56lb Carton Size 48cm * 40cm * 20cm / 18.9inch * 15.75inch * 7.87inch Loading Container 20GP: 694 cartons * 200 pcs = 138800 pcs40HQ: 1612 cartons * 200 pcs = 322400 pcs
£2.99 £0.99
-
Waveshare Industrial 8-Ch Ethernet Digital Input / Output Module Modbus RTU / TCP Protocol, Supports PoE Power Supply, 33917
1. Onboard voltage regulation chip, supporting a wide voltage range from 7V to 36V, and supporting PoE Ethernet power supply2. Supports control via MQTT protocol, providing Alibaba Cloud MQTT application routines3. Onboard integrated power isolation, capable of providing stable isolated voltage, and the isolated end does not require additional power supply4. Input features bidirectional optocoupler isolation, supporting passive and active switch input, built-in anti-jitter algorithm, relays support switch input linkage mode or inversion mode control5. Output uses Darlington, with optocoupler isolation, stronger driving capability, with a driving current of up to 500mA, and built-in reverse current diode protection6. Output has flash-on and flash-off functions, can be set with parameters in the instruction, automatically turns off after a certain period of time after the output is turned on7. Rail-mounted enclosure design, convenient installation, safer to use8. External indicator light, convenient for checking input/output status, MCU status and signal transmission/reception status9. Size: about 14.5 x 9 x 4 cmPackaging list:- Modbus POE ETH IO 8CH host unit x 1- Screwdriver x 1Specification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 18cm * 12cm * 6cm / 7.09inch * 4.72inch * 2.36inch Qty per Carton 40 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 40 pcs = 17520 pcs40HQ: 1018 cartons * 40 pcs = 40720 pcs
£42.99
-
Wintact Wintact WT3122 Household Electromagnetic Radiation Tester, WT3122
Feature:1. It can test electric field strength and magnetic field strength to reach the optimal test result. Its widely used to test and learn electromagnetic radiation situation indoor and outdoor. Suitable to measure the electro-magnetic generated machine, measure low frequency appliance and high frequency radiation appliance.2. One instrument with two uses, it can test the electric field and the magnetic field radiation at the same time.2. Sound-light alarm, when the test result exceeds the safe value, the instrument will alarm automatically.3. Data locking, one-key lock of the radiation value and easily read the value.4. Measure the Environment Temperature: with 2 temperature units (Celsius and Fahrenheit).5. Radiation assessment, remind you whether the radiation value is safe or not.6. Fashionable design, easy on-hand operation, its easy to carry and make field measurement.Specifications:1. Material: ABS Plastic2. Unit: V/m (Electric Field), micro T / mG(Magnetic Field)3. Accuracy: Electric: 1V/m, Magnetic: 0.01 micro T / 0.1mG4. Range: Electric: 1-1999V/m, Magnetic: 0.01-99.99 micro T / 0.1-999.9mG5. Alarm Threshold: Electric: 40V/m, Magnetic: 0.4 micro T/4mG6. Display: 3-1/2 LCD display7. Test Bandwidth: 5Hz-3500MHz8. Sampling Time: about 0.4 Seconds9. Test Mode: Bimodule Synchronous Test10. Overload Indication: Max value of measurement range on LCD11. Operating Temperature: 0-50 Celsius degree12. Operating Humidity: relative Humidity less than 80%13. Working Voltage: 3.7V14. Power Supply: 3.7V 600mAh lithium battery15. Size: 134 x 61 x 25mm 16. Weight: 131.3gSpecification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 18cm * 12cm * 6cm / 7.09inch * 4.72inch * 2.36inch Qty per Carton 60 Carton Weight 16.50kgs / 36.38lb Carton Size 48cm * 42cm * 38cm / 18.9inch * 16.54inch * 14.96inch Loading Container 20GP: 348 cartons * 60 pcs = 20880 pcs40HQ: 808 cartons * 60 pcs = 48480 pcs
£13.99
-
MP3 / MP4 Music Player Bluetooth Radio E-book Playback Walkman, No TF Card, 8GB, 16GB, 32GB, 64GB, 128GB
1. Screen: 1.8-inch color screen2. Memory card type: TF card3. Expansion card: support4. Interface: USB 2.05. Headphone jack: 3.5mm6. Support format: OGG, ACELP, MP3, WMA, APE, FLAC, WAV, AAC7. Screen resolution: 160 x 1288. Menu language: English, Russian, German, Italian, Spanish, Dutch, Portuguese9. Additional functions: watch function, Bluetooth support, picture browsing, FM radio function, recording function, playback function, e-book reading10. Bluetooth version: 5.211. Battery capacity: 210mAh12. Charging input: 5V/1A13. Charging time: about 2-3h14. Battery life: about 7h15. Size: about 6.2 x 4.2 x 1.22cm16. Weight: about 68gSpecification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 15cm * 10cm * 6cm / 5.91inch * 3.94inch * 2.36inch Qty per Carton 100 Carton Weight 15.50kgs / 34.17lb Carton Size 40cm * 38cm * 28cm / 15.75inch * 14.96inch * 11.02inch Loading Container 20GP: 626 cartons * 100 pcs = 62600 pcs40HQ: 1454 cartons * 100 pcs = 145400 pcs
£16.99 - £30.99
-
G600W Electronic Microscope HD Mobile Repair Microscope, US Plug, G600W
1. Pixel: HD 3.6 million pixels2. Display screen: 4.3 inches3. Magnification: 1-600 times continuous magnification system4. Battery capacity: 2000mAh5. Sixteen language systems: English, Spanish, Russian, Korean, Japanese, Thai, Hebrew, Portuguese, German, French, Italian, Turkish, Czech, Polish, Traditional Chinese, Simplified Chinese6. Insertable memory card, support 1-64GB7. With 8 bright LED lights8. Packing list: host, bracket, power cord, charging head, storage tableSpecification: Package Weight One Package Weight 0.55kgs / 1.21lb One Package Size 17cm * 21cm * 8cm / 6.69inch * 8.27inch * 3.15inch Qty per Carton 50 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 50 pcs = 8850 pcs40HQ: 412 cartons * 50 pcs = 20600 pcs
£28.99
-
HABOTEST HABOTEST HT107D Multifunctional Digital Display Socket Tester, HT107D (US Plug), HT107D (UK Plug), HT107D (EU Plug)
1. Operating voltage: 90-250V / 45-65Hz 2. Phase voltage: 90-250V / 45-65Hz 3. Leakage voltage: 0-99V / 45-65Hz 4. Operating temperature: 0-40 degree Celsius 5. Operating humidity: 20-75%RH 6. Storage temperature: -10~50 degree Celsius 7. Storage humidity: 20-80%RH 8. Altitude: less than 2000m 9. RCD test: more than 30mA 10. RCD working voltage: 220V 11. GFCI test: more than 5mA 12. GFCI working voltage: 110V Specification: General Certificate EMC Package Weight One Package Weight 0.11kgs / 0.24lb One Package Size 8.2cm * 7.3cm * 7.3cm / 3.23inch * 2.87inch * 2.87inch Qty per Carton 120 Carton Weight 14.00kgs / 30.86lb Carton Size 42cm * 38cm * 38cm / 16.54inch * 14.96inch * 14.96inch Loading Container 20GP: 439 cartons * 120 pcs = 52680 pcs40HQ: 1020 cartons * 120 pcs = 122400 pcs
£8.99