Search results for "ethernet cables"

HDMI • RJ45 • UP TO 30M Extend a compatible HDMI signal using Cat5e/Cat6 cable. This HDMI extender set uses a Cat5e/Cat6 network cable to extend compatible HDTV display signals, with the supplied specification stating a transmission distance of up to 30 metres. HDMI to RJ45Transmitter and receiver architecture. Cat5e/Cat6Uses one compatible network cable between units. 30m transmissionSpecified maximum distance is up to 30 metres. Installation overview Connect the HDMI source to the transmitter. Connect the transmitter and receiver using compatible Cat5e/Cat6 cable. Connect the receiver to the HDMI display. Power and operate the system according to the supplied instructions. Confirm the required HDMI equipment and cable specification before installation.

Read more less

1. AC600 wireless repeater is mainly used to provide free Wi-Fi service in large areas such as factories, communities, streets and so on. AP/ Repeater can receive the existing 2.4GHz or 5GHz wireless signal, repeat and expand the range that the router or access point cannot reach. AP / Repeater supports both 2.4G and 5G wireless network connections, and can support 2.4G and 5G transmission speeds up to 600Mbps. It has 2 external antennas, which can provide better wireless performance, transmission rate, stability technology, and automatically avoid channel conflicts through its channel selection function.2. Leading 802.11ac standard3. Comply with IEEE 802.11 ac / a / b / g / n standards4. Dual frequency speed up to 2.4GHz 150Mbps, 5GHz 433Mbps5. Moisture-proof RJ45 connector, integrated passive power over Ethernet (PoE)6. Passive PoE support, flexible deployment7. According to the different antennas, it can provide high performance on the remote link.8. With up to 600mW power and enhanced receiver designThe sturdy weatherproof housing can withstand harsh outdoor conditions.9. Operation mode: router, AP, repeater, WISP10. With the highest security of 802.1X, WAP and WPA211. Support 3 LED wireless signal strength12. Built-in lightning arrester (15kV ESD)13. Port: 1 x WAN / LAN 14. Button: 1 x reset 8s 15. LED: 1 x power supply, 1 x WAN / LAN, 1 x WiFI, 3 x signal16. Chipset: MT7688A + 7610E17. Flash memory: 64Mb18. DDR2: 512M19. Power supply: DC24V / 0.5A Power over Ethernet (passive PoE)20. Power consumption: 7W MAX21. Rated voltage/frequency input: 100-240 Va.c. 50/60 Hz22. Dimensions: 180mm x 50mm x 50mm (L x W x H)23. Wireless standard: IEEE 802.11b/g/n/a/ac, frequency band 2.4GHz, 5GHz, maximum transmit power 27DBm24. Sensitivity: 802.11b: -93dBm /802.11g: -73dBm / 802.11n: -68dBm25. Speed: 802.11ac: up to 433Mbps, 802.11n: up to 150Mbps; 802.11a: up to 54Mbps; 802.11g: 54Mbps; 802.11b: 11Mbps26. Wireless security: WPA-PSK / WPA2-PSK encryption27. Antenna: 2x7dBi detachable omnidirectional directional28. Outdoor distance is 500m, indoor distance is 150m (varies according to actual environment)29. Package content: 2 x Omni antennas. 1 x WiFi AP/router1 x RJ-45 network cable1 x power adapter1 x POE converter1 x main body bracket2 x cable tie1 x Screw accessories1 x quick installationSpecification: General Certificate CE Package Weight One Package Weight 0.49kgs / 1.08lb One Package Size 37cm * 13cm * 8cm / 14.57inch * 5.12inch * 3.15inch Qty per Carton 20 Carton Weight 10.36kgs / 22.84lb Carton Size 54cm * 42cm * 39cm / 21.26inch * 16.54inch * 15.35inch Loading Container 20GP: 301 cartons * 20 pcs = 6020 pcs40HQ: 699 cartons * 20 pcs = 13980 pcs

Read more less

1. Camera input: expands two CSI interfaces for AI applications such as facial recognition, road sign detection, line recognition, and license plate recognition2. 7 USB Ports: 4 Type-A + 1 Type-C + 2 USB 2.0 ribbon cables for diverse peripherals. USB 3.2 Gen 2 port supports up to 10Gbps data transfer; Type-C port enables system flashing3. 4K HD Output via DisplayPort interface4. Color-coded 40-pin GPIO interface for expanding I2C, SPI, I2S, UART, and GPIO resources5. Flexible storage and wireless expansion: Base board features two M.2 Key M slots for SSDs and an M.2 Key E interface for wireless network cards, minimizing cable clutter6. Size: about 10.3 x 9.05 cmSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 12cm * 12cm * 2cm / 4.72inch * 4.72inch * 0.79inch Qty per Carton 210 Carton Weight 20.00kgs / 44.09lb Carton Size 50cm * 38cm * 35cm / 19.69inch * 14.96inch * 13.78inch Loading Container 20GP: 401 cartons * 210 pcs = 84210 pcs40HQ: 930 cartons * 210 pcs = 195300 pcs

Read more less

1) The tester uses 6V DC as the power supply only. 2) Never attempt to connect and start the tester with any power supply other than the tester itself. 3) For an economic use of battery,the tester will shut off automatically if it does not work for 30 minutes in succession. 4) One person enough to complete cable continuity check. 5) Check wiring error in 5E,6E,coaxial cable and telephone line. 6) Such as open circuit,short circuit,jumper wire,reverse connection or cross-talk interference. 7) Locate the wiring or connection error. 8) Measure cable length and determine the distance of open circuit and short circuit. 9) Dynamically calibrate cable length and make length measurement as accurate as 97%. 10) Simple and easy use.big screen to display test result clear. 11) Portable unit with long battery life(wait-case 50 hours) 12) Automatically time-delay shut off. 13) Measure length and pair with or without far-end recognizer. 14) Locate cable and there are 8 far-end passive test jacks(ID NO. ID1-ID 8) 15) Far-end recognizer with prompting voice. 16) Self-checking function and automatically compensate any change in battery capacity or ambient temperature. 17)Single board computer software watchdog design and reliable operation. 18) Overall dimension: 180x80x40mm 19) Power supply 4x1.5V size AA batteries with power consumption 16 mA (not included) 20) Display: special 4x16 character big screen LCD lattice(valid visual field 61.6x25.2mm) 21) Length calibration: user can set calibration factor by himself with a given length cable.the length of calibrating cable is more than 5m.Specification: Package Weight One Package Weight 0.31kgs / 0.69lb Qty per Carton 8 Carton Weight 10.00kgs / 22.05lb Carton Size 48cm * 32cm * 32cm / 18.9inch * 12.6inch * 12.6inch Loading Container 20GP: 542 cartons * 8 pcs = 4336 pcs40HQ: 1259 cartons * 8 pcs = 10072 pcs

Read more less

1. Support 2.4GHz or 5GHz dual WiFi band 2. Standard: IEEE 8.2.11b/g/n 2.4GHz, IEEE 8.2.11a/n/ac 5.0GHz 3. WiFi range: large homes 4. With 2dBi antenna 5. Hardware version: version 1.0 6. Supported systems: Windows XP / Vista / Windows 7 / Windows 8 / Mac / LinuxSpecification: General Model EDUP Types Network Card Material Metal, Plastic Standard IEEE 802.11ac/a/n 5GHz IEEE 802.11b/g/n 2.4GHz Support System Windows XP, Windows Vista, Windows 7, Windows 8, Linux, Mac OS Size 8.5*5.2*1.1cm Weight 17g Environment Operating Temperature 0 - 40 Degrees Celsius Storage Temperature -40 - 70 Degrees Celsius Operating Humidity 10% - 90% RH, noncondensing Storage Humidity 5% to 90% RH non-condensing Package Include Package Contents 1 x Wireless Adapter 1 x User Manual 1 x Antenna 1 x CD Driver Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 12.5cm * 9.5cm * 2.5cm / 4.92inch * 3.74inch * 0.98inch Qty per Carton 80 Carton Weight 7.90kgs / 17.42lb Carton Size 40cm * 30cm * 22cm / 15.75inch * 11.81inch * 8.66inch Loading Container 20GP: 1010 cartons * 80 pcs = 80800 pcs40HQ: 2344 cartons * 80 pcs = 187520 pcs

Read more less

MIRA SALES • PREMIUM PRODUCT GUIDE 4-in-1 2.4GHz / 5.8GHz 8dBi RP-SMA WiFi Antenna Extension Cable A multi-antenna extension solution for compatible wireless networking equipment, combining four antenna leads with RP-SMA connections for flexible positioning. ✨ AT A GLANCE 4-in-1 antenna extension configuration • 2.4GHz / 5.8GHz frequency support • 8dBi antenna specification • RP-SMA connection format 🔎 PRODUCT OVERVIEW A multi-antenna extension solution for compatible wireless networking equipment, combining four antenna leads with RP-SMA connections for flexible positioning. This product is built around a clear everyday purpose, combining practical functionality with a clean, attractive form. The design and configuration shown on this page are intended to make the product straightforward to understand and easy to integrate into the relevant setup. Whether you are replacing an older accessory, improving an existing setup, preparing for travel, organising equipment or carrying out a repair, selecting the correct configuration is important. Review the compatibility information and product photographs carefully before ordering. ⭐ KEY FEATURES FEATURE 01 4-in-1 antenna extension configuration FEATURE 02 2.4GHz / 5.8GHz frequency support FEATURE 03 8dBi antenna specification FEATURE 04 RP-SMA connection format 🛠 DESIGNED FOR PRACTICAL EVERYDAY USE The correct connector gender, device interface and frequency compatibility should be confirmed before installation. The product's form factor has been presented to highlight its intended use while keeping the overall experience practical and convenient. The accompanying photographs provide a closer look at the physical design and available configuration. For the best experience, use the product only for its intended purpose and follow any relevant device, manufacturer or safety guidance. Where compatibility matters, compare your exact device, connector, dimensions or configuration rather than relying only on a general category description. 📋 PRODUCT DETAILS Compatibility / Application: Compatible wireless network cards and equipment using RP-SMA antenna connections Key Specifications: 4-in-1 antenna extension configuration; 2.4GHz / 5.8GHz frequency support; 8dBi antenna specification; RP-SMA connection format. Product Design: Purpose-built for the application described above with an emphasis on practical handling and everyday convenience. Configuration: Select the correct available variant where multiple options are offered. 💎 WHY YOU'LL LIKE IT The product brings together useful functionality and a purpose-built design in a format that is easy to understand and use. It is particularly suited to customers who prefer a dedicated solution with clearly defined features rather than a generic alternative. 🎯 BEST FOR Compatible wireless network cards and equipment using RP-SMA antenna connections. It is a practical addition for customers who want the functionality, convenience and appearance described above. 📸 PRODUCT PHOTOS Explore the product photographs below for a closer look at the design, construction and available configuration. Images are displayed at a comfortable medium size. 🛍 MIRA SALES TIP Take a moment to verify the exact model, generation, dimensions, connector, installation method, colour or configuration relevant to your purchase. Choosing the correct variant first helps avoid compatibility issues and ensures the product matches your intended setup. ⚠ IMPORTANT INFORMATION Product specifications and compatibility can vary by device, variant and application. Always confirm the information relevant to your setup before ordering. Specialist repair parts should be installed by appropriately experienced users or technicians. Electrical and vehicle-related products should be used according to applicable safety guidance. For the rolling accessory, use only for lawful purposes and comply with applicable local regulations. ✅ BEFORE YOU ORDER Check compatibility with your exact device or application. Select the correct variant, colour, generation or configuration. Compare connector types and physical dimensions where relevant. Use the product photographs as a visual reference. Follow appropriate manufacturer and safety guidance for specialist products. Mira Sales • Practical Products. Clear Information. We bring the important product information, compatibility guidance and product photography together so you can understand the product clearly before ordering.

Read more less

1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, providing stable connection and efficient transmission.11. Integrated PoE module makes the development boards power supply more flexible.12. Only one network cable connected to a PoE device is needed for the ESP32-P4-WIFI6-POE-ETH to achieve networking and power supply.13. Uses an IPS full-laminated tempered glass panel with a 178-degree wide viewing angle, supports ten-point touch, and provides a clear picture and excellent visual experience.14. Dimensions: 55x68mmRaspberry Pi camera type B:1. Image sensor: OV56472. CMOS size: 1/4 inch3. Pixels: 5 million4. Aperture: F2.05. Focal length: 6mm6. Diagonal field of view: 60.6 degrees7. Infrared night vision: not supported8. Focusing method: manual focus1. Screen model: 10.1-DSI-TOUCH-A2. Resolution: 800 x 1280 (H x V)3. Communication interface: MIPI-DSI (2-lane)4. Brightness: 400cd/m25. Touch chip: GT92716. Dimensions: 147.0 × 239.0 (mm)7. Display size: 135.36 × 216.58 (mm)8. Pixel size: 0.1692 (H) × 0.1692 (V) (mm)9. Contrast ratio: 800:1Package contents:- ESP32-P4-WIFI6-POE-ETH x 1- 10.1-inch display x 1- SH1.0 4PIN connecting cable (approx. 150mm) x 2- 1217 cavity speaker 8Ω 2W x 1- 2.4G antenna x 1- RPi camera (B) x 1- FFC cable - 15-pin ribbon cable x 1- MIPI-DSI cable 12cm x 1- MX 1.25 2-pin to 2.54 3-pin connector cable x 1- FFC cable 22-pin 200mm (reverse direction) x 2- MX1.25 2-pin to MX1.25 4-pin cable approximately 150mm x 1- MX1.25 2-pin to SH1.0 2-pin connector cable approximately 80mm x 1- USB Type-A dual male cable x 1- USB Type-A to Type-C cable approximately 1 meter x 1- Copper standoffs pack x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 23cm * 16cm * 7cm / 9.06inch * 6.3inch * 2.76inch Qty per Carton 16 Carton Weight 9.10kgs / 20.06lb Carton Size 48cm * 34cm * 30cm / 18.9inch * 13.39inch * 11.81inch Loading Container 20GP: 544 cartons * 16 pcs = 8704 pcs40HQ: 1264 cartons * 16 pcs = 20224 pcs

Read more less

Specification:1. Model: KBC202. LAN: 1 x RJ453. RS232/RS485/RS422: 1 x RJ45 networkport to 9-pinround hole male4. RS422: 1 x 5 Pin Terminal5. TALLY/CONTACT: 1 x 8 Pin Terminal6. KENSINGTON: /Performance1. Control Protocol: NDI, ONVIF, IP VISCA, VISCA, Pelco-D, Pelco-P2. Baud Rate(dps): 1200, 2400, 4800, 9600, 19200, 38400, 1152003. Display: LCD Screen4. Key Tone: ON/OFF5. Joystick: Four dimensions (control: up, down, left, right, zoom, rotation)6. Upgrade: WEB upgrade Other Parameters1. Input Voltage: DC 12V2. Power Consumption: Maximum: 0.6W3. Temperature: 0 degree C-50 degree C4. Humidity: 0%-90%Feture: 1. Support multiple control network protocols, compatible with any PTZ cameras2. LCD screen real-time display working status, improve efficiency3. Reasonable button layout, easily handle any live video production4. 4D Joystick precise speed control5. Custom button setting, more flexible for controlling6. Multiple control connectors, up to connect 255 cameras7. Support POE (Power over Ethernet)Packing List:1. Controller x 12. Power Adapter x 13. RS45-DIN8 Cable x 14. Quick Start Guide x 1Specification: Package Weight One Package Weight 1.50kgs / 3.32lb One Package Size 28cm * 14cm * 12cm / 11.02inch * 5.51inch * 4.72inch Qty per Carton 6 Carton Weight 11.50kgs / 25.35lb Carton Size 57cm * 34cm * 30cm / 22.44inch * 13.39inch * 11.81inch Loading Container 20GP: 458 cartons * 6 pcs = 2748 pcs40HQ: 1064 cartons * 6 pcs = 6384 pcs

Read more less

Introduction1. This kind of HDMI Extender by CAT-5e/6; uses two pieces of CAT-5e/6 cables to extend the HDTV display up to 30 meters or 100ft and supports up to 1080p. 2. It not only breaks the limitation of the HDMI cable transmission length, but also CAT-5e/6 has more flexibility and convenience in cable constriction.Connection and Operation1. Plug the fixed HDMI cable of the sender into the HDMI input source such as: HD-DVD, PS3, STB or etc. 2. Connect two CAT-5e/6 cables to both the output of the transmitter and input of the receiver. 3. Plug the fixed HDMI cable of the receiver into the HDMI display (such as: HD LCD or HD-DLP).Features and Specifications1. One pair as a full functional module, no need to perform any settings. 2. CAT-5e/6 cable can substitute HDMI cable to achieve long distance transmission. 3. Follow the standard of iEEE-568B. 4. Transmission distance can extended up to 30 meters or 100ft. 5. Supports up to 1080p. 6. Signal rate up to 1.65Gbps in support of 1080p displays. 7. Compact size. 8. HDCP compliant.Specification: General Size 6*4*2.1cm (single) Weight 39g(single) Package Include Package Contents 2 x HTMI Extender Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 19.2cm * 15.2cm * 3cm / 7.56inch * 5.98inch * 1.18inch Qty per Carton 60 Carton Weight 3.12kgs / 6.88lb Carton Size 47cm * 41cm * 33cm / 18.5inch * 16.14inch * 12.99inch Loading Container 20GP: 419 cartons * 60 pcs = 25140 pcs40HQ: 973 cartons * 60 pcs = 58380 pcs

Read more less

1. High fidelity sound quality, support a variety of audio, braided network protection line body2. Imported PMMA optical fiber material, signal transmission is not subject to electromagnetic and noise interference, no noise and no current rope generation, better and clearer audio and video quality3. Aluminum alloy nickel-plated shell, high-strength protection, safe and durable, protect the connector to make the transmission more stable4. Highly polished convex lens fiber optic head, can highly focus the beam, reduce the transmission time difference and distortion, make the transmission signal high fidelity video and audio more clear5. Both ends of the light port are equipped with dust caps to prevent oxidation of the optical fiber port in contact with air and to protect the port for longer service life6. Compatible with most SPDIF/Toslink port devices7. Dolby AC3 and DTS surround technology, standard S/PDIF protocol transmission, support transmission of PCM, Dolby DOLBY, DTS, 5.1 and most other audio signals8. Braided mesh protection, flexible and tensile, protects the cable and reduces damage9. 24K gold-plated port, reduce oxidation and rust, prolong the service life, more stable signal transmission10. Interface material: 24K gold-plated head11. Cover material: PE12. Sheath material: PVC + nylon mesh13. Cover material: nylon braid14. Shell material: aluminum alloy with nickel plating15. Port: square port fiber optic interfaceSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 18cm * 14cm * 2cm / 7.09inch * 5.51inch * 0.79inch Qty per Carton 356 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 356 pcs = 63012 pcs40HQ: 412 cartons * 356 pcs = 146672 pcs

Read more less

1. Antenna specification: 5dBix2 external every day2. Wireless standard: support IEEE802.11b/g/n standard3. Power supply: power supply mode: POE power supply, support 8.2.3af/802.3at standard brick (100 meters)4. Working frequency band: EW71 2.4GHz; EW72 2.4&5.8GHz5. PA power amplifier: EW71 2xSE2576L; EW72 SE2576LX1, SKY85728-116. EW71 is suitable for general outdoor environments with few end users and less interference, EW72 is suitable for outdoor environments with many end users and high requirements for multiple wireless networks7. Power consumption: less than 8W8. Protection level: IP669. Dimensions: 353x85x44 mm10. Shell material: ABS11. Packing list: POE Power Supply x 1Network Cable x 1Host x 1Installation Guide x 1Screw x 2 Stainless Steel Cable Tie x 2Specification: Package Weight One Package Weight 0.61kgs / 1.35lb One Package Size 38cm * 12cm * 10cm / 14.96inch * 4.72inch * 3.94inch Qty per Carton 30 Carton Weight 17.97kgs / 39.62lb Carton Size 30cm * 50cm * 59.9cm / 11.81inch * 19.69inch * 23.58inch Loading Container 20GP: 296 cartons * 30 pcs = 8880 pcs40HQ: 688 cartons * 30 pcs = 20640 pcs

Read more less

1. Flexible Expansion: One USB 3.0 connection from host computer to this base, built-in 38 inches (approximately 96.8 cm) Type-C cable provides dual HDMI video output, wired Gigabit Ethernet, 85W PD charging port, power input port, SD/ TF card slot and two USB 3.0 ports. All possibilities in one dock. Reduce neck and shoulder pain while increasing productivity. Note: Please make sure the hosts Type-C port supports video output (DisplayPort selectable mode), otherwise the docking station will not work. If you are not sure, please feel free to contact us. NOTE: If you feel it is not tight enough, please use a wrench (included) to tighten the bracket.2. Multifunctional Type-C hub: 85W power output charging port allows you to charge your computer or other Type-C devices while transferring data. 1000M Ethernet port for instant and stable access to the Internet, bringing you a better surfing experience, 2 USB 3.0 ports at up to 5Gbps, speed sync data, 10 times faster than USB 2.0, SD/TF card slot for excellent Data storage versatility, transmission speed up to 104MB/s.3. Superior performance with dual displays: Try the latest 4K/60Hz Ultra HD video with a projector, HD TV or monitor to optimize your viewing experience! Note: MacOS does not support different monitors between 2 external monitors. Dual 4K@60Hz is only available for laptops that support DP1.4 Alt Mode and DSC, or the dock only supports dual 1080P 60Hz. If you are not sure, please contact the PC manufacturer to confirm whether the Type-C port supports DP1.4 and DSC.4. High Compatibility: This laptop adapter is compatible with most laptops from 10-17 inches. (Not recommended for thick gaming laptops or workstations.) Various systems such as Windows/Mac/Chrome/Linux/iPad OS/Android, etc. Some old system versions may require drivers. Take this foldable and portable laptop stand with you in your backpack.5. Committed to every detail: WAVLINK ergonomic laptop stand is made of high-quality aluminum, firmly fixed with a wrench, adjust the tightness, no need to worry about any shaking. Thermally conductive alloy and ventilated hollow design, work together to cool your computer and prevent overheating. Silicone pads can protect your device from scratches and sliding.Specification: 1. Material Type: Aluminum2. Adjustable: 0°-180°3. Product weight: 972g/2.14lb4. 2x HDMI: up to 4K/60Hz5. 1x Type-C (power input): 100W6. 1x Type-C (power output): 85W7. 1x Ethernet: 1Gbps8. 2x USB 3.0: up to 5 Gbps9. 1 SD card reader: 104 MB/S10. 1x Micro SD card reader: 104 MB/SSpecification: Package Weight One Package Weight 1.20kgs / 2.65lb One Package Size 27.3cm * 22.5cm * 5.1cm / 10.75inch * 8.86inch * 2.01inch Qty per Carton 24 Carton Weight 30.00kgs / 66.14lb Carton Size 79cm * 65cm * 14cm / 31.1inch * 25.59inch * 5.51inch Loading Container 20GP: 370 cartons * 24 pcs = 8880 pcs40HQ: 861 cartons * 24 pcs = 20664 pcs

Read more less