Search results for "electronic testing tools"

1. Helps you diagnose and clean fuel injectors, easily identifying common faults such as stuck, clogged, leaking, or burned fuel injectors.2. Features two pulse output temperatures (two pairs of test leads) for simultaneous testing of two fuel injectors for comparison.3. This fuel injector tester kit features an LCD display and eight pulse modes, including four pulse signal output modes and two output voltage levels: short/medium/long/continuous pulse modes, and high/low (12V/5V) power drive modes.4. Helps you identify good and bad injectors with the engine off.5. Select any mode as needed, and its mode lock feature ensures consistent testing conditions.6. Compatible with 12V injectors from nearly all vehicle models, suitable for both EFI and GDI injectors.7. The power cord is up to 40 inches/100 cm long, and the test leads are 20 inches long, making it easy to connect and use.8. The wires are made of high-quality silicone for improved high and low temperature resistance.9. Powered by a 12V battery or an external DC 12V (minimum 1.5A recommended) power adapter.10. Operates with the engine off and works with any fuel pressure tester (Note: gasoline vehicles only, not diesel engines).11. Features power input reverse connection protection and output short-circuit protection. If the fuel injector is damaged or the pulse output terminal is short-circuited, the fuel injector cleaning tools power indicator will flash.Specification: Package Weight One Package Weight 0.28kgs / 0.62lb One Package Size 18cm * 13cm * 7cm / 7.09inch * 5.12inch * 2.76inch Qty per Carton 16 Carton Weight 5.60kgs / 12.35lb Carton Size 38cm * 28cm * 30cm / 14.96inch * 11.02inch * 11.81inch Loading Container 20GP: 835 cartons * 16 pcs = 13360 pcs40HQ: 1939 cartons * 16 pcs = 31024 pcs

Read more less

1. Screen size: 2.8 inches2. Screen material: TFT color screen3. Backlight: adjustable backlight brightness4. Charging power: 5V/1A5. Battery capacity: 3000mAh6. DC voltage: 1.9999V/19.99V/1000V7. Real-time sampling rate: 5MSa/second8. Analog bandwidth: 1MHz9. Input impedance: 1M10. Test voltage range: 80vpp-800vpp11. Vertical sensitivity: 10mV/div-10V/div12. Vertical displacement: adjustable with indicator13. Horizontal time base: 500ns-20s14. Trigger mode: Auto/Normal/Single15. Output waveform: 0-10KHz16. Square duty cycle: 0-100%, square and sawtooth adjustableSpecification: Package Weight One Package Weight 0.62kgs / 1.38lb One Package Size 20cm * 11cm * 9cm / 7.87inch * 4.33inch * 3.54inch Qty per Carton 40 Carton Weight 25.80kgs / 56.88lb Carton Size 57cm * 42cm * 38cm / 22.44inch * 16.54inch * 14.96inch Loading Container 20GP: 293 cartons * 40 pcs = 11720 pcs40HQ: 680 cartons * 40 pcs = 27200 pcs

Read more less

1. It is a product designed for traction and start-up lead-acid battery, which can satisfy the loading capacity of traction lead-acid battery and cranking ability test of start-up lead-acid battery, also it provides internal resistance parameters while testing . 2. The instrument is featured by excellent design, convenient operation, accurate reading and complete functions. Instrument adopts lattice LCD display, test process and results acousto-optic hint. 3. Its inner side adopts precise circuit and powerful digital processing unit, using four-wire Kelvin test connection method to complet a series of complicated data collection and calculation and obtain the test data of each item. 4. The inner of instrument has strengthened the input protection, to prevent polarity reversed connection, and access voltage too high, poor contact of test clip head, over temperature prompt and other protection measures, in order to make the operation more security and convenient. 5. The shell of instrument is made of solid ABS engineering materials, at the same time, its top and bottom add steel plate with opening for simulating heating part of load and equipped with fans to strengthen cooling in order to make the testing process more stable and reliable. 6. Test lines are made of pure copper thicker test wire, with four-wire Kelvin test clamp connection,test sampling value directly from the battery terminal, in order to restore the actual working condition of battery, make the test results more accurate.Specification: Package Weight One Package Weight 0.92kgs / 2.02lb One Package Size 26cm * 15.5cm * 7.5cm / 10.24inch * 6.1inch * 2.95inch Qty per Carton 24 Carton Weight 19.74kgs / 43.52lb Carton Size 48cm * 42cm * 38cm / 18.9inch * 16.54inch * 14.96inch Loading Container 20GP: 348 cartons * 24 pcs = 8352 pcs40HQ: 808 cartons * 24 pcs = 19392 pcs

Read more less

About The ProtuctThis instrument can help you diagnose injector problems, and can test the fuel injectors one by one to help confirm the stuck, leaking or combustion finished condition. It has four kinds of pulse signal output mode, users can choose any one according to their needs. Using 12V automobile battery as the power supply, the continuous working mode can identify the quality of the fuel injector when the engine is off, and the mode locking function ensures the consistency when testing the fuel injector. This instrument can be used with any fuel pressure testerOperating Instructions1. Tumn off the engine of the car. 2. Remove the wire plug with the fuel injector to be tested, and then connect the two pulse output terminals of the instrument with the fuel injector of the vehicle. 3. Connect the red clip of the instrument to the positive pole of 12V automobile battery, and connect the black clip of the instrument to the negative pole of the battery. 4. Press "Mode set" key to select the required pulse signal output mode, and the screen will display the currently selected mode. The different models are explained as follows: Mode "1": single pulse mode. In this mode, when the "Pulse" key is pressed, the instrument will send out a pulse with a pulse width of about 255 Ms. Mode "2": short pulse mode. In this mode, when the "Pulse" key is pressed, the instrument will send out 50 pulses with a pulse width of about 7Ms. Mode "3": long pulse mode. In this mode, when the "Pulse" key is pressed, the instrument will send out100 pulses with a pulse width of about 3.5 Ms. Mode "4": continuous pulse mode. In this mode, when the "Pulse" key is pressed, the instrument will continuously output pulses with a pulse rate of about 50 pulses per 1450 MS and a pulse width of about 7Ms.Press the "Pulse" key again to terminate the pulse output. 5. After selecting the required pulse signal output mode, press the "Pulse" key, the instrument will output pulse to the fuel injector to be tested, and the signal indicator will be on when the pulse is output. 6. After the test is completed, if it is necessary to repeat the test, press the "Pulse" key again; if you want to change the pulse mode, press the "Reset" key, you can select the required mode at will, and then test the fuel injector again.Warning1. The engine of the car must be turned off before using this instrument. 2. Do not smoke or ignite near the car. 3. Donot splash the fuel on the hot engine parts. 4. Use this instrument only in ventilated places. Do not inhale the exhaust gas from the car and the steam generated by the fuel flying. 5. Do not get close to the rotating (or moving) parts of any car, and do not touch the heating parts of any car. 6. Do not short circuit the positive and negative electrodes of the automobile battery. 7. Do not touch any auto parts with dangerous voltage 8. Always follow the warnings, cautions and maintenance instructions in the vehicle maintenance manual. 9. Wear qualified goggles. 10. After the test, all disconnected vehicle connections should be restored correctly.Specifications1. 12V battery power supply 2. Working conditions: 0-40 degree C; relative humidity less than and equal to 80% 3. Storage conditions:-20C -50a??;relative humidity less than and equal to 85%Specification: Package Weight One Package Weight 0.24kgs / 0.53lb One Package Size 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch Qty per Carton 40 Carton Weight 9.80kgs / 21.61lb Carton Size 42cm * 33cm * 42cm / 16.54inch * 12.99inch * 16.54inch Loading Container 20GP: 458 cartons * 40 pcs = 18320 pcs40HQ: 1063 cartons * 40 pcs = 42520 pcs

Read more less

1. Purpose: Measure tilt angle2. Resolution: 0.1 degree3. Measuring range: 4x90 degrees4. Power supply: 1 AAA battery (not included)5. Size: About 5.7x3 cm6. Weight: About 70 gramsFeatures:1. 4 kinds of units can be switched, angle, slope, in/ft, mm/m2. Powerful adsorption magnet design, 360-degree comprehensive measurement, inclination/level test function3. The screen automatically flips. When the instrument is placed upside down, the display screen will automatically flip and display, 360 measurement, convenient for viewing data Strong backlight4. Convenient to view data, automatic shutdown after 1 minute of non-use, energy saving and power saving5. It can be locked at any angle, and the HOLD key can hold measurement data at any angleSpecification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 10cm * 10cm * 3.5cm / 3.94inch * 3.94inch * 1.38inch Qty per Carton 200 Carton Weight 21.00kgs / 46.30lb Carton Size 52cm * 42cm * 37cm / 20.47inch * 16.54inch * 14.57inch Loading Container 20GP: 330 cartons * 200 pcs = 66000 pcs40HQ: 766 cartons * 200 pcs = 153200 pcs

Read more less

1. Read the code: show some diagnostic fault codes after scanning the vehicle2. Clear code: clear the repaired fault code (follow the scanners prompts)3. Oil service reset: after changing the oil, if impurities in the oil may damage the engine, the oil service life reminder function should be reset (turn off the oil service indicator light). In this way, the vehicle can recalculate another optimal oil replacement cycle based on driving conditions and driving mileage, which can not only ensure the normal operation of the vehicle, but also ensure driving safety.4. Battery registration: helps you register batteries with the same capacity and type as the original battery, allowing the battery to adapt to the electronic control unit and function properly5. Supported languages: English, Chinese, Traditional Chinese, German, French, Italian, Portuguese, Spanish, Polish, Russian, Russian6. Size: 20x9x3cmSpecification: Package Weight One Package Weight 0.75kgs / 1.66lb One Package Size 24cm * 17cm * 9cm / 9.45inch * 6.69inch * 3.54inch Qty per Carton 12 Carton Weight 10.10kgs / 22.27lb Carton Size 50cm * 36cm * 29cm / 19.69inch * 14.17inch * 11.42inch Loading Container 20GP: 510 cartons * 12 pcs = 6120 pcs40HQ: 1185 cartons * 12 pcs = 14220 pcs

Read more less

1. Safety level: CAT.III 600V2. Measurement function: capacitance, resistance, AC voltage, DC voltage3. Other functions: automatic range, on-off buzzer test, diode test, data retention, automatic shutdown4. DC voltage range: 4V/40V/400V/600V5. AC voltage range: 4V/40V/400V/600V6. Capacitance range: 4nF/40nF/400nF/4uF/40uF/400uF/4mF7. Maximum display: 4000 counts8. Battery type: 2 x AAA batteries (not included)9. Size: 16.5x9.3x5.0cm10. Net weight: 239gSpecification: General Certificate CE, FCC, EMC Package Weight One Package Weight 0.29kgs / 0.64lb One Package Size 16.5cm * 9.5cm * 5cm / 6.5inch * 3.74inch * 1.97inch Qty per Carton 50 Carton Weight 15.20kgs / 33.51lb Carton Size 40cm * 35cm * 27cm / 15.75inch * 13.78inch * 10.63inch Loading Container 20GP: 705 cartons * 50 pcs = 35250 pcs40HQ: 1637 cartons * 50 pcs = 81850 pcs

Read more less

1. Built-in various safety protections, reverse polarity protection, temperature protection, leakage protection, etc., safe to use2. Using ABS flame retardant material, not waterproof3. With multiple functions, easy to use and easy to carry4. Features: 2 in 1 battery tester and battery charger5. Main functions: battery charging, battery test, start system test, charging system test, view data, set language6. Suitable for 12V SLI / AGM / EFB / GEL / LiFeP04 battery7. Current (Max): 8A8. Charging voltage: 2-200Ah9. Input voltage: 100VAC-240VAC 15.00V (Max)10. Working temperature: -20 - 50 degrees Celsius11. Electric energy conversion rate: 90%12. Product weight: 0.8KGSpecification: Package Weight One Package Weight 1.00kgs / 2.21lb One Package Size 28cm * 18cm * 7cm / 11.02inch * 7.09inch * 2.76inch Qty per Carton 20 Carton Weight 21.00kgs / 46.30lb Carton Size 58cm * 38cm * 30cm / 22.83inch * 14.96inch * 11.81inch Loading Container 20GP: 403 cartons * 20 pcs = 8060 pcs40HQ: 936 cartons * 20 pcs = 18720 pcs

Read more less

1. Voltage: 0.1~70V2. Display: TFF color display (160x128 DPI)3. Resistor: 0.1 ohm ~ 200 kilohm4. Power supply mode: car battery provides power 12.0 or 24.0V5. Diode: 0.2V~2.6V6. Frequency: 10HZ-200KHZ7. Trip current: 8AMPS for 1 hour, 12AMPS for less than 1 hour, 16AMPS for less than 5SEC8. Working voltage: 6-30V9. Cable length: 6 meters10. Supports multiple different languages: English, Spanish, German, French, Italian, Portuguese, Polish, Japanese, Korean and other languages11. There is no need to select a mode after powering on, and the voltage, resistance, and diode in the vehicle electrical system circuit can be quickly detected.12. It can reduce the diagnosis time of all 6 to 30 volt vehicle electrical systems, is easy to operate, has wide practicability, and has a full intelligent circuit break function, making it safer to use.13. Can flexibly test voltage, frequency, duty cycle, and injector, automatically draw waveform signals, simple switching, and convenient operation14. Can be used to activate fuel pumps, solenoids, blowers, cooling fans, headlights and other components15. The circuit breaker has a short-circuit protection function. If it is overloaded, the internal circuit breaker will automatically trip to ensure safe use at all times.16. Dimensions: 165x40x27mmSpecification: Package Weight One Package Weight 1.22kgs / 2.70lb One Package Size 19cm * 25cm * 9cm / 7.48inch * 9.84inch * 3.54inch Qty per Carton 16 Carton Weight 20.10kgs / 44.31lb Carton Size 52cm * 35cm * 39cm / 20.47inch * 13.78inch * 15.35inch Loading Container 20GP: 375 cartons * 16 pcs = 6000 pcs40HQ: 872 cartons * 16 pcs = 13952 pcs

Read more less

1. DC voltage: 600V2. AC voltage: 450V3. AC current: 20-200-400A4. Resistance (ohm): 200K5. Buzzer function: yes6. Maximum LCD screen: yes7. Data retention function: Yes8. Battery type: 2 x 1.5V (AAA battery) (not included)9. Material: plastic, electronic parts10. Dimensions (LxWxH): 298 x757 x 208 mm11. Net weight 170g12. Package includes- 1 x Clamp digital multimeter- 1 x Tester pen- 1 x Instruction manual- 1 x Storage bag- 1 x LanyardSpecification: Package Weight One Package Weight 0.36kgs / 0.80lb One Package Size 30cm * 20cm * 8cm / 11.81inch * 7.87inch * 3.15inch Qty per Carton 82 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 82 pcs = 14514 pcs40HQ: 412 cartons * 82 pcs = 33784 pcs

Read more less

1. 4 in 1 Measurement Capabilities:Electric field: 1–1999?V/m (±1?V/m)Magnetic field: 0.1–1999mGRF power: 0.2–1000?mW/square centimetersTemperature: built-in sensor for ambient reading2. Default thresholds at 40?V/m for electric field and 0.4?microtesla for magnetic field, adjustable via intuitive menu 3. Large 2.4″ color display with adjustable brightness, data?hold function, bilingual interface (EN/CN), and compact portable size (143×68×29?mm, 143?g)4. USB?C 5?V/1?A charging, integrated 1000?mAh battery, long-lasting usage5. The device features a switchable curve recording mode that accurately tracks and displays radiation level fluctuations over a defined time interval, offering clear visual insight into temporal changes.Specification: Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 22cm * 10cm * 5cm / 8.66inch * 3.94inch * 1.97inch Qty per Carton 50 Carton Weight 14.00kgs / 30.86lb Carton Size 52cm * 46cm * 27cm / 20.47inch * 18.11inch * 10.63inch Loading Container 20GP: 412 cartons * 50 pcs = 20600 pcs40HQ: 958 cartons * 50 pcs = 47900 pcs

Read more less

1. Detects three types of radiofrequency radiation (RF): WIFI/PHONE (WIFI radiation), MICROWAVE (microwave radiation), MIXED (mixed electromagnetic radiation)2. Detects three types of non-ionizing radiation: Electric Field (EF), Magnetic Field (MF), Radio Frequency (RF)3. USB rechargeable with built-in high-capacity lithium battery for extended runtime4. Three-color backlight and bar graph alerts provide additional visual assessment of radiation intensity alongside numerical readings5. Auto-shutdown after 15 minutes of inactivity6. Versatile applications: suitable for TVs, computers, home appliances, substations, mobile phones, base stations, etcSpecifications1. Measurement accuracy: ±5%2. Measurement bandwidth: 40Hz-10GHz3. Auto-off: default 15 minutes, can be disabled4. Operating temperature/humidity: temperature: -10 to +60°C; humidity: less than 80% RH5. Battery capacity: 320mAh6. Charging: 5V 500mA7. Charging port: Type-C8. Size: about 14.4 x 6.7 x 2.7cm9. Weight: about 140gSpecification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 18cm * 10cm * 6cm / 7.09inch * 3.94inch * 2.36inch Qty per Carton 40 Carton Weight 12.00kgs / 26.46lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 40 pcs = 20880 pcs40HQ: 1212 cartons * 40 pcs = 48480 pcs

Read more less