WUPP

1. Input voltage: DC12V 2. Product line length: 170CM (without extension cord) 3. Fast charge output: 5V / 3.4A; 9V / 2.5A; 12V / 2A 4. Maximum power: 30W 5. Material: aluminum alloy 6. Installation hole diameter: install and use within 2.2-2.6CM diameter 7. Wiring instructions: The red wire is connected to the positive pole of the power supply, and the black wire is connected to the negative pole of the power supply 8. Uses: can be used to power most car supplies such as mobile phones, tablets, IPAD, navigation and GPS 9. Heat and corrosion resistance, flame retardant properties, very high safety factor 10. With a voltmeter, you can check the battery usage at any time to prevent safety accidents caused by bad batteries 11. Independent switch can control USB and voltmeter at the same timeSpecification: Package Weight One Package Weight 0.27kgs / 0.59lb One Package Size 14.6cm * 10.8cm * 5.6cm / 5.75inch * 4.25inch * 2.2inch Qty per Carton 60 Carton Weight 17.28kgs / 38.10lb Carton Size 44cm * 44cm * 28cm / 17.32inch * 17.32inch * 11.02inch Loading Container 20GP: 491 cartons * 60 pcs = 29460 pcs40HQ: 1141 cartons * 60 pcs = 68460 pcs

Read more less

1. Aluminum alloy material, strong and durable 2. The four corners are super stable and locked, which is more secure and safe, and the mobile phone will not fall off the rugged stairs 3. Anti-slip gasket, anti-slip film, protect the phone, not scratch the phone 4. 360 degree rotation, horizontal screen and vertical screen as you turn 5. Wide range of use, 4-6.0 inch mobile phones are available 6. Can be installed on motorcycles, off-road vehicles, ATVs and other transportation tools 7. Cable length: 130cm 8. Installation diameter: 2.8-3.5cm 9. Material: aluminum alloy, stainless steel, ABS, rubber 10. Accessories: anti-drop net*1, adhesive*2, non-slip rubber sleeve*2, bracket connecting rod*1, U-shaped bracket*2, non-slip gasket*1, faucet fixing accessories*1, anti-theft screw*2Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 14cm * 10cm * 9cm / 5.51inch * 3.94inch * 3.54inch Qty per Carton 40 Carton Weight 13.46kgs / 29.67lb Carton Size 42cm * 30cm * 45cm / 16.54inch * 11.81inch * 17.72inch Loading Container 20GP: 470 cartons * 40 pcs = 18800 pcs40HQ: 1091 cartons * 40 pcs = 43640 pcs

Read more less

1. Product material: ABS resistant to high and low temperature, flame retardant and environmentally friendly material 2. Input voltage: DC12-24V 3. Output voltage: USB output: 5V3.4A/9V2.5A/12V2A, PD output power: 20W, 5V3A/9V2.22A/12V1.67A 4. Monitorable voltage range: 6-30V 5. Product usage: It can be used to power most car-mounted products such as mobile phones, tablets, IPAD, navigation and GPS 6. Multiple protection functions Input over-voltage and under-voltage protection; output over-current, over-voltage, under-voltage, and short-circuit protection; overload protection; reverse connection protection; chip internal high-temperature protection 7. Product size: length 66.6mm, width 38mm, height 21.3mm 8. Product accessories: handlebar mounting bracket*1, screw mounting bracket*1, large screw*2, small screw*1, handlebar fixing screw*1, non-slip gasket*1 Performance advantages: 1. Two installation methods, handlebar installation and screw installation, meet the installation and use of most models on the market 2. The product design adopts an integrated SAE interface, which can be directly plugged with the SAE interface of the original car, making the installation more convenient 3. Comes with a waterproof and dustproof cover, IP66 waterproof rating, one waterproof cover, rain or shine 4. The product has an independent switch button, which can be turned on immediately after use, to avoid power consumption and easy to use 5. The product has a voltmeter display to monitor the voltage at any time. The body adopts ogo light, which looks beautiful and generous. 6. The product supports USB and PD fast charging, which is wider and more convenient 7. It can be installed on DC12V-24V vehicles, motorcycles, ATVs, SUVs, boats and other transportation tools, with a wide installation range; built-in power MOS, can provide 20W output power, and can automatically adjust the output voltage according to the fast charging protocol And current to adapt to the charging power of each mobile phone 8. The product has dual USB super fast charging ports, supports Type-C output and USB PD2.0/PD3.0 (PPS) protocol; supports 5V 3.4A/ 9V 2.5A / 12V 2A three output solutions, support The fast charging protocols are: DCP (applicable to Apple and BC1.2), Qualcomm QC2.0/QC3.0, applicable to Huawei fast charging protocol FCP and high-voltage SCP, applicable to Samsung fast charging protocol AFC (MAX 12V), MTK PE+1.1 and MTK PE+2.0 can automatically identify the fast charging protocol supported by the device connected to the output terminal (if the mobile phone itself does not support fast charging, the charger does not support fast charging protocol)Specification: Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 8cm * 6cm * 12cm / 3.15inch * 2.36inch * 4.72inch Qty per Carton 80 Carton Weight 9.74kgs / 21.47lb Carton Size 40cm * 24cm * 48cm / 15.75inch * 9.45inch * 18.9inch Loading Container 20GP: 578 cartons * 80 pcs = 46240 pcs40HQ: 1343 cartons * 80 pcs = 107440 pcs

Read more less

1. Product material: ABS, high and low temperature resistant flame retardant environmental protection material2. Input voltage: DC12-24V3. Output voltage: USB port output 5V3.4A / 9V2.5A / 12V2A4. Monitorable voltage range: 6-30V5. Installation method: handlebar installation, screw fixation (two installation methods)6. Product use: It can be used to power most car-mounted products such as mobile phones, tablets, IPAD, navigation and GPS.7. Scope of application: It can be installed on DC12-24V vehicles, motorcycles, ATVs, SUVs, boats and other transportation tools.8. Multiple protection functions: input over-voltage and under-voltage protection; output over-current, over-voltage, under-voltage, and short-circuit protection; overload protection; reverse connection protection; chip internal high-temperature protection9. Product size: length 66.6mm, width 38mm, height 21.3mm10. Product accessories: handlebar mounting bracket*1, screw mounting bracket*1, large screw*2, small screw*1, handlebar fixing screw*1, non-slip gasket*1, 1.4m SAE socket + OT terminal cablePerformance advantages:1. Two installation methods, handlebar installation and screw installation, can meet the installation and use of most models on the market2. The product design adopts an integrated SAE interface, which can be directly plugged with the SAE interface of the original car, making the installation more convenient3. Comes with a waterproof and dustproof cover, IP66 waterproof rating, one waterproof cover, rain or shine5. The product has a voltmeter display, monitors the voltage at any time, and the body adopts logo lighting, which looks beautiful and generous6. Can be installed on DC12-24V vehicles, motorcycles, ATVs, SUVs, boats and other transportation tools, with a wide installation range; built-in power MOS, can provide 20W output power, and can automatically adjust the output voltage according to the fast charging protocol And current to adapt to the charging power of each mobile phone7. The product has dual USB super fast charging ports, supports 5V 3.4A/ 9V 2.5A / 12V 2A three output schemes, and supports fast charging protocols: DCP (for Apple and BC1.2), Qualcomm QC2. 0/QC3.0, for Huawei fast charge protocol FCP and high voltage SCP, for Samsung fast charge protocol AFC (MAX 12V), MTK PE+1.1 and MTK PE+2.0, it can automatically identify the output supported by the device Fast charge protocol (if the phone itself does not support fast charge, the charger does not support fast charge protocol)8. 1.4m OT terminal connection cable, free 10A fuse, to protect electrical appliancesSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 8cm * 6cm * 12cm / 3.15inch * 2.36inch * 4.72inch Qty per Carton 80 Carton Weight 14.22kgs / 31.35lb Carton Size 40cm * 24cm * 48cm / 15.75inch * 9.45inch * 18.9inch Loading Container 20GP: 578 cartons * 80 pcs = 46240 pcs40HQ: 1343 cartons * 80 pcs = 107440 pcs

Read more less

1. Easy to install, easy to use, easy to use. 2. Choose rubber and stainless steel materials, wind and rain, durable and anti-rust. 3. Anti-skid and shock-proof, rough surface particles, increase the contact area, not afraid of shaking. 4. The CNC precision machining screw part is made of stainless steel, CNC precision machining, safe and durable. 5. Nut reaction force design, the position of the nut can be adjusted according to the depth of the screw hole, and the ball head is firmly fixed. 6. Material: rubber + stainless steel 7. Size: M10 ball head diameter 25mm, thread length about 11mm, pitch 1.25mm, bottom diameter 10mm, total length 52mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 11cm * 7cm * 3cm / 4.33inch * 2.76inch * 1.18inch Qty per Carton 200 Carton Weight 13.50kgs / 29.76lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 200 pcs = 104400 pcs40HQ: 1212 cartons * 200 pcs = 242400 pcs

Read more less

1. Easy to install, easy to use, easy to use. 2. Choose rubber and stainless steel materials, wind and rain, durable and anti-rust. 3. Anti-skid and shock-proof, rough surface particles, increase the contact area, not afraid of shaking. 4. The CNC precision machining screw part is made of stainless steel, CNC precision machining, safe and durable. 5. Nut reaction force design, the position of the nut can be adjusted according to the depth of the screw hole, and the ball head is firmly fixed. 6. Material: rubber + stainless steel 7. Size: M8 ball head diameter 25mm, thread length about 11mm, pitch 1.25mm, bottom diameter 8mm, total length 52mmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 11cm * 7cm * 3cm / 4.33inch * 2.76inch * 1.18inch Qty per Carton 200 Carton Weight 11.50kgs / 25.35lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 200 pcs = 104400 pcs40HQ: 1212 cartons * 200 pcs = 242400 pcs

Read more less

1. It can be installed on DC12-80V motorcycles, automobiles, ATVs, and off-road vehicles. The installation range is particularly wide.2. Large-area heat-dissipating aluminum material has faster heat dissipation and better effect, which can effectively extend the service life of the product.3. The installation angle of the lamp can be adjusted as required.4. Material: aluminum alloy5. Input voltage: DC12-80V6. Power rate: 30W (single lamp)7. Protection level: IP688. Lighting time: 20000H9. Color temperature: 5000-6500K10. Cable length: 45CM11. Wiring method: the black wire is connected to the negative pole, and the red wire is connected to the positive poleSpecification: Package Weight One Package Weight 0.62kgs / 1.38lb One Package Size 16cm * 12cm * 10cm / 6.3inch * 4.72inch * 3.94inch Qty per Carton 26 Carton Weight 17.62kgs / 38.85lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 26 pcs = 13572 pcs40HQ: 1212 cartons * 26 pcs = 31512 pcs

Read more less

1. One-piece molding to prevent rain and dust from entering the internal corrosion parts, longer service life and safer 2. Built-in intelligent temperature control chip, three-speed adjustable temperature, intelligent temperature control is safer 3. 12V voltage, 22MM handlebar inner diameter, suitable for most motorcycles 4. Double throttle cable buckle, wider installation range 5. The design can be sealed and can be opened, which does not affect the installation of the handle outside the handle, and only the lights and other decorative accessories are installed, which is more beautiful and convenient 6. The product has added a standby mode. After switching to the standby state, the electric heating handle will automatically maintain a constant temperature of about 50 degrees, and it will automatically shut down after two hours. You dona??t have to worry about running out of the motorcycle battery because you forget to turn off the switch. 7. Applicable models: 12V motorcycle with a handlebar diameter of 22mm 8. Handle temperature: low temperature 40 degrees Celsius, medium temperature 50 degrees Celsius, high temperature 60 degrees Celsius Installation notes: 1. First remove the original handlebar with tools, and then clean the original handlebar 2. Then moisten the inner holes of the left and right handles of the product with soapy water respectively, and install the left and right handles on the handlebars of the original car separately. 3. When installing the right handlebar, the power cord should be left enough for rotation to facilitate the rotation of the accelerator 4. Fix the S bracket on the handle of this product to the position where the handle has screws, and fix the wire on the bracket to avoid shaking the handle wire and reduce damage 5. The red wire of the product power cord is connected to the positive pole of the power supply of the car, and the black wire of the product is connected to the negative pole of the power supply of the car. 6. Because this product has two fixing methods (rearview mirror fixing, 3M glue fixing), you can fix the aluminum alloy switch to the L bracket with small screws, and then fix the L bracket to the rearview mirror base and tighten it; or directly Use 3m film to stick to the back of the aluminum alloy switch, and then stick the 3m glue to a suitable position on the car to fix it. Precautions: 1. When installing the left handle, do not twist the handle too much. Excessive twisting will cause the heating wire to shift 2. For models with balance iron, please adjust the installation position of the balance iron. Do not squeeze the handle when tightening the screws. The balance iron is slightly separated from the handle. If the installation position of the balance iron cannot be adjusted, please add a spacer between the balance iron and the handle. Excessive squeezing of the handle will cause difficulty in turning the handle switch and abnormal damage such as the heating wire squeezing out of the handle surface.Specification: Package Weight One Package Weight 0.37kgs / 0.80lb One Package Size 20cm * 13cm * 6cm / 7.87inch * 5.12inch * 2.36inch Qty per Carton 40 Carton Weight 15.78kgs / 34.79lb Carton Size 40cm * 39cm * 42cm / 15.75inch * 15.35inch * 16.54inch Loading Container 20GP: 407 cartons * 40 pcs = 16280 pcs40HQ: 944 cartons * 40 pcs = 37760 pcs

Read more less

1. Input voltage: DC12V 2. Product line length: 108CM (heating film to switch), 146CM (switch to electric door lock) 3. Working temperature: -30 to 100 degrees Celsius 4. Product power: 20W, 15W, 10W 5. Product material: composite fiber heating wire + Kevlar wear-resistant cloth, (L bracket) stainless steel 6. Product accessories: 3M glue*1, cable tie*5, stainless steel L bracket*1 7. Installation method: 3M glue sticking and fixing, L bracket lens holder fixing 8. Wiring method: red connect to the positive pole, black connect to the negative pole (the lamp does not turn on when the connection is reversed, and only heats up) 9. Operating instructions: power on: red light, blue light and green light each flash once and then go out 10. Standby: the red light flashes in breathing state, the temperature reaches a certain temperature and it will automatically turn into a blue light 11. Click the power button: switch gears 12. Note: the positive and negative poles are connected reversely, the switch cannot be used, and the heating element directly heats up Product advantages: 1. Kevlar material, heat up faster, heat more evenly, after 8000 times abrasion test successfully 2. Built-in intelligent temperature control chip, three-speed adjustable temperature, intelligent temperature control is safer 3. 10 seconds rapid heating, large heating area 4. The heating sheet is fixed by hook and loop fastener, which is convenient and quick 5. IP67 waterproof level, even if the switch and handle cover are soaked in water, they can work normally. When the handle cover needs to be cleaned, only unplug the plug and wash with water, which is very convenient Pay attention: 1. Please select the appropriate gear according to the ambient temperature. Under low temperature conditions, if the temperature of the electric heating grip cover cannot be sensed in time due to the numbness of the hand, please use the low or medium gear first to prevent high temperature burns. 2. This product is only suitable for motorcycles with 12V battery. Please read the installation diagram carefully before installation. Incorrect wiring will cause damage to the components. 3. This product can only be installed on the handlebars of motorcycles when it is energized. You can use a battery to test whether the product is properly energized before installation. 4. It is strictly forbidden to energize and work when not riding (empty burn), in order to prevent the temperature of the electric handle cover from being too high and damaging the original handlebar 5. It is recommended to connect the electric door lock cable to the wiring. Most models have black positive pole and green negative pole. For specific conditions, it is recommended to use a multimeter to measureSpecification: Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 13cm * 4cm * 17cm / 5.12inch * 1.57inch * 6.69inch Qty per Carton 80 Carton Weight 13.90kgs / 30.64lb Carton Size 52cm * 40cm * 34cm / 20.47inch * 15.75inch * 13.39inch Loading Container 20GP: 377 cartons * 80 pcs = 30160 pcs40HQ: 875 cartons * 80 pcs = 70000 pcs

Read more less