Products
-
WAVESHARE Waveshare RM500U-CN 5G HAT Quad Antennas LTE-A Multi Band Module Board for Raspberry Pi, RM500U-CN 5G HAT
Features1. Comes with RM500U-CN core module, supports 5G and LTE-A multi network types, supports 5G NSA and SA networking 2. Integrates extensive network protocols, with multi drivers and software support, compatible with different OS including Windows / Linux / Android 3. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication 4. Standard M.2 B KEY slot, compatible with different 5G modules: RM500U-CN / RM500Q-CN / RM500Q-GL series 5. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 6. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 7. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 8. 2x SIM card slot, dual card single standby, switchable via AT command 9. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. 5G: - 5G NR: 3GPP Release 15 NSA/SA operation, Sub-6 GHz - 5G NR NSA: n41, n78, n79 - 5G NR SA: n1, n28, n41, n77, n78, n79 - Downlink: 4 x 4 MIMO n1, n41, n77, n78, n79 2. LTE: - LTE Category: Downlink Cat 12, uplink Cat 13 - LTE-FDD: B1, B2, B3, B5, B7, B8, B20, B28 - LTE-TDD: B34, B38, B39, B40, B41 - Downlink 2 x 2 MIMO: B1, B2, B3, B5, B7, B8, B20, B28, B34, B38, B39, B40, B41 3. UMTS: WCDMA: B1, B2, B5, B8 Data rate: 1. 5G SA Sub-6: Downlink 2 Gbps; uplink 1 Gbps 2. 5G NSA Sub-6: Downlink 2.2 Gbps; uplink 575 Mbps 3. LTE: Downlink 600 Mbps; uplink 150 Mbps 4. UMTS: Downlink 42.2 Mbps; uplink 11 Mbps Other: 1. Operating temperature: -30 degree C ~ +75 degree C 2. Extension temperature: -40 degree C ~ +85 degree C 3. Module dimensions: 30.0 x 52.0 x 2.3 (mm) 4. Module weight: 8.9 (g)Package List1. M.2 TO 4G/5G HAT x 1 2. RM500U-CN x 1 3. Antenna 4pcs x 1 4. IPEX adapter cable 4pcs x 1 5. 2*20PIN pin header x 1 6. 5V 3A Type-C power adapter x 1 7. Dual plug USB3.0 cable x 1 8. USB3.0 adapter x 1 9. USB2.0 adapter x 1 10. SMA protective cap 4pcs x 1 11. Screws pack x 1Specification: Package Weight One Package Weight 0.36kgs / 0.79lb One Package Size 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch Qty per Carton 40 Carton Weight 13.00kgs / 28.66lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 40 pcs = 22640 pcs40HQ: 1314 cartons * 40 pcs = 52560 pcs
£143.99
-
WAVESHARE WAVESHARE RP2350 1.75-Inch AMOLED Screen Development Board, Without Case, With Case, With GPS
AMOLED screen specifications1. Display panel: AMOLED2. Display size: 1.75 inches3. Display resolution: 466 x 466 pixels4. Display colors: 65K5. Display brightness: 700 cd/㎡6. Contrast ratio: 100000:17. Communication interface: QSPI8. Driver IC: CO53009. Touch: supported10. Touch IC: CST9217Product features1. Unique dual-core, dual-architecture design, featuring a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.2. Built-in 520KB SRAM and 16MB on-chip Flash, with a reserved PSRAM pad.3. Onboard 1.75-inch capacitive touch HD AMOLED screen. 1. Screen: 466 × 466 resolution, 65K color, capable of clearly displaying color images.2. Built-in CO5300 driver chip and CST9217 capacitive touch chip, using QSPI and I2C interfaces respectively for communication, minimizing interface pin usage.3. Onboard 3.7V MX1.25 lithium battery charging/discharging interface, beneficial for mobile applications.4. USB 1.1 master and slave device support.5. Supports low-power sleep and hibernation modes.6. Can be recognized as a mass storage device via USB for drag-and-drop program download.7. Five multi-functional GPIO pins.8. One SPI, two I2C, two UART, four 12-bit ADCs, and five controllable PWM channels.9. Precise on-chip clock and timers.10. Built-in temperature sensor for real-time chip temperature monitoring.11. Twelve programmable I/O (PIO) ports. 14. State machine for custom peripheral support.15. Employs AXP2101 for efficient power management, supports multiple voltage outputs, integrates charging and battery management functions, and optimizes battery life.16. Uses an AMOLED screen with higher contrast, wider viewing angles, richer colors, and faster response time, resulting in superior visual effects while offering advantages such as slim design, low power consumption, and flexibility.17. Compact panel for more touch possibilities, suitable for various smart device development, enabling human-computer interaction functions, and can operate independently with a battery.18. Onboard audio codec chip supports high-quality audio processing, providing clear and excellent audio input and output.Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 12.70kgs / 28.00lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs40HQ: 1137 cartons * 144 pcs = 163728 pcs
£30.99 - £39.99
-
Waveshare Waveshare RP2350 7 Inch LCD Development Board, 800 X 480 Resolution, 65K Color, Supports Dual-Core And Dual-Architecture, No Touch Control, With Touch Control
1. RP2350B microcontroller chip designed for Raspberry Pi2. Unique dual-core, dual-architecture design featuring dual-core ARM Cortex-M33 processors and dual-core Hazard3 RISC-V processors, each clocked at up to 150MHz, enabling flexible switching between architectures3. Integrated 520KB SRAM, 16MB on-chip Flash, and 2MB PSRAM4. Features a Type-C interface for reversible plugging5. Onboard 7-inch capacitive LCD display with 800 × 480 resolution and 65K colors6. Supports I2C interface for capacitive touch control, 5-point touch, with interrupt support (touch version only)7. Onboard interfaces include Sensor, CAN, RS485, I2C, and UART8. USB 1.1 host and device support9. Supports low-power sleep and hibernation modes10. USB mass storage mode for drag-and-drop program downloads11. Precise on-chip clock and timers12. Built-in temperature sensor for real-time chip temperature monitoring13. 12 programmable I/O (PIO) state machines for custom peripheral supportPackage contents:- Display x 1- HY2.0 2-pin to male DuPont connector 2-pin about 10cm x 2- HY2.0 3-pin to male DuPont connector 3-pin about 10cm x 1- HY2.0 4-pin to male DuPont connector 4-pin about 10cm x 2- Screw set x 1Specification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 20cm * 14cm * 4cm / 7.87inch * 5.51inch * 1.57inch Qty per Carton 36 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 38cm * 30cm / 16.54inch * 14.96inch * 11.81inch Loading Container 20GP: 556 cartons * 36 pcs = 20016 pcs40HQ: 1292 cartons * 36 pcs = 46512 pcs
£28.99 - £33.99
-
Waveshare Waveshare RP2350 Dual-Core Development Board With 3.5-Inch 320x480 LCD, 65K Color Display, Standard Ver, With Case and OV5640 camera
1. This product is a high-performance, highly integrated microcontroller development board independently designed by Waveshare. Within its compact form factor, it integrates peripherals including a 3.5-inch capacitive HD IPS display, highly integrated power management IC, low-power audio codec, camera interface, 6-axis IMU (3-axis accelerometer + 3-axis gyroscope), RTC, and Micro SD card slot, facilitating development and product integration. 2. Features Raspberry Pi-designed RP2350B microcontroller chip 3. Unique dual-core/dual-architecture: Dual ARM Cortex-M33 cores + dual Hazard3 RISC-V cores, both operating at up to 150MHz, enabling flexible architecture switching 4. Built-in 520KB SRAM and 16MB on-chip Flash 5. Type-C interface eliminates orientation concerns 6. Onboard 3.5-inch capacitive touch HD IPS screen with 320 × 480 resolution and 65K colors for clear image display 7. Integrated ST7796 display driver and FT6336 capacitive touch controller using SPI and I2C interfaces respectively, minimizing pin consumption 8. Camera interface compatible with mainstream modules (e.g., OV2640, OV5640) for image/video capture 9. Onboard 3.7V MX1.25 lithium battery charge/discharge interface 10. USB 1.1 host/device support 11. Low-power sleep/hibernation modes 12. Programmable via drag-and-drop when recognized as USB mass storage 13. 22 multifunctional GPIO pins: 2×SPI, 2×I2C, 2×UART, 7×12-bit ADC, 18×PWM channels 14. Precision on-chip clock/timer modules 15. Built-in temperature sensor for real-time chip monitoring 16. 12 programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 48 Carton Weight 5.90kgs / 13.01lb Carton Size 30cm * 42cm * 32cm / 11.81inch * 16.54inch * 12.6inch Loading Container 20GP: 661 cartons * 48 pcs = 31728 pcs40HQ: 1535 cartons * 48 pcs = 73680 pcs
£25.99 - £32.99
-
Waveshare Waveshare RP2350A 1.54inch E-Paper Display Development Board 200 × 200 Resolution,, Without Touch Control, With Touch Control
1. The product is a high-performance, highly integrated microcontroller development board. It integrates high-capacity Flash and onboard 1.54inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-life scenarios. Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Lithium Batt recharge and discharge management circuit. Reserved interfaces including USB, UART, I2C, and GPIO for easy functionality expansion and sensor connectivity, providing a flexible and reliable development platform for IoT terminals, electronic tags, portable displays, and other applications.2. Features the RP2350A microcontroller chip developed by Raspberry Pi3. Unique dual-core, dual-architecture design: equipped with dual-core ARM Cortex-M33 and dual-core Hazard3 RISC-V processors; clock speeds up to 150MHz; allows flexible switching between the two architectures4. Built-in 520KB SRAM and 16MB on-chip Flash5. Uses a USB Type-C interface—modern and convenient, eliminating the need to worry about plug orientation6. Onboard 1.54-inch E-Ink display (200 × 200 resolution) featuring high contrast and wide viewing angles7. Supports USB 1.1 Host and Device modes8. Supports low-power sleep and dormant modes9. Recognized as a mass storage device via USB for drag-and-drop file uploading10. Breaks out 7 GPIO pins and USB+/- pins from the RP2350A11. Includes 1x I2C, 1x UART, 2x 12-bit ADC, and 6x controllable PWM channels; features precise on-chip clocks and timers12. Built-in temperature sensor for real-time chip temperature monitoring13. 12 Programmable I/O (PIO) state machines for custom peripheral supportSpecifications:1. Display Panel: E-Ink screen2. Display Size: 1.54 inches3. Resolution: 200 × 2004. Grayscale Levels: 25. Communication Interface: SPI6. Full Refresh Time: 2s7. Display Colors: Black, White8. Partial Refresh Time: 0.3s9. Viewing Angle: Greater than 170-degree10. Display Mode: ReflectiveSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 180 Carton Weight 11.00kgs / 24.25lb Carton Size 47cm * 37cm * 30cm / 18.5inch * 14.57inch * 11.81inch Loading Container 20GP: 511 cartons * 180 pcs = 91980 pcs40HQ: 1186 cartons * 180 pcs = 213480 pcs
£16.99 - £21.99
-
Waveshare Waveshare SG90 Micro Servo
1. Product: SG90 Servo2. Torque: 2.0kg/cm(4.8V), 2.2kg/cm(6V)3. Speed: 0.09s/60°(4.8V), 0.08s/60°(6V)4. Rotate angle: 180°5. Operating voltage: 4.8 ~ 6V6. Gear: plastic7. Dead band: 7us8. Weight: 10.5g9. Dimension: 22.8mm × 12.2mm × 28.5mmSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 5cm * 4cm * 6cm / 1.97inch * 1.57inch * 2.36inch Qty per Carton 800 Carton Weight 15.00kgs / 33.07lb Carton Size 40cm * 40cm * 60cm / 15.75inch * 15.75inch * 23.62inch Loading Container 20GP: 277 cartons * 800 pcs = 221600 pcs40HQ: 644 cartons * 800 pcs = 515200 pcs
£4.99 £1.99
-
WAVESHARE Waveshare SIM7600G-H M.2 4G HAT LTE CAT4 High Speed GNSS Global Band Module for Raspberry Pi, SIM7600G-H M.2 4G HAT
Features1. This is a 4G/3G/2G Raspberry Pi communication HAT with GNSS positioning and high speed LTE CAT4 global band connection. By connecting it to PC, Raspberry Pi or Jetson Nano host boards, it is easy to enable 4G high speed networking, cloud platform communication, phone call/SMS, and global GNSS positioning functions. 2. Support dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on 3. GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station 4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication 5. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 9. Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position 10. Onboard audio jack and audio decoder, allows audio operation like making phone call 11. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. LTE Cat-4: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 2. LTE-TDD: B34, B38, B39, B40, B41 3. 3G: UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19 4. 2G: GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz GNSS: 1. Satellite systems: GPS, Beidou, GLONASS, GALILEO, QZSS 2. Receiver type: - 16-channel - C/A Code 3. Sensitivity: - -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou) - Cold starts: -148 dBm 4. Time-To-First-Fix (open air): - Cold starts: Less than 35s - Hot starts: Less than 1s SMS and Audio 1. SMS: - Supported types: MT, MO, CB, Text, PDU - Storage: USIM card and ME (default) 2. Audio feature: - Support echo cancellation - Support noise reductionPackage List1. M.2 TO 4G/5G HAT x 1 2. SIM7600G-H-M.2 x 1 3. Antenna 2pcs x 1 4. IPEX adapter cable 2pcs x 1 5. 2*20PIN pin header x 1 6. Passive GPS antenna x 1 7. Dual plug USB3.0 cable x 1 8. USB3.0 adapter x 1 9. USB2.0 adapter x 1 10. SMA protective cap 2pcs x 1 11. Screws pack x 1Specification: Package Weight One Package Weight 0.24kgs / 0.52lb One Package Size 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch Qty per Carton 40 Carton Weight 9.80kgs / 21.61lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 40 pcs = 22640 pcs40HQ: 1314 cartons * 40 pcs = 52560 pcs
£63.99
-
WAVESHARE Waveshare SIM8202G-M2 5G HAT B Multi Band Snapdragon X55 Module Board for Raspberry Pi, SIM8202G-M2 5G HAT B
Features1. Comes with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, supports 5G NSA and SA networking, supports multi-mode multi-band 2. Multi-constellation dual-band positioning: GPS, Beidou, Glonass, Galileo, and QZSS 3. Operating system support: Windows/Linux/Android 4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication 5. Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 series 6. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 9. 4x SMA to IPEX antenna connectors, with pre-soldered SMA terminals for connecting antennas 10. 2x SIM card slot, dual card single standby, switchable via AT command 11. Onboard audio jack and audio decoder, allows audio operation like making phone call 12. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. Sub-6G (SA): n1, n2, n3, n5, n7, n8, n12, n20, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 2. Sub-6G (NSA): n41, n77, n78, n79 3. LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 4. LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48 5. WCDMA: B1, B2, B3, B4, B5, B8 6. GNSS: GPS, GLONASS, Beidou, Galileo, and QZSS Data rate 1. Sub-6G: 2.4 Gbps (DL) / 500 Mbps (UL) 2. LTE: 1 Gbps (DL) / 200 Mbps (UL) 3. HSPA+: 42 Mbps (DL) / 5.76 Mbps (UL) Software functions 1. Operating systems: Windows/Linux/Android 2. Communication protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 3. SMS: Supports MT, MO, CB, Text, PDU 4. Firmware upgrade: Supports firmware upgrade via USB port Applications 1. Applicable regions: Regions with 5G Sub-6G signal coverage including China, US, Japan, South Kor, Europe, the Middle East, Latin America, etc. 2. Application examples: CPE, Smart gateway, Drone, Live streaming, Remote treatment, Intelligent securityPackage List1. M.2 TO 4G/5G HAT x1 2. SIM8202G-M2 x1 3. Antenna 4pcs x1 4. IPEX adapter cable 4pcs x1 5. 2 x 20PIN pin header x1 6. Passive GPS antenna x1 7. Dual plug USB3.0 cable x1 8. USB 3.0 adapter x1 9. USB 2.0 adapter x1 10. SMA protective cap 4pcs x1 11. Screws pack x1Specification: Package Weight One Package Weight 0.34kgs / 0.74lb One Package Size 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch Qty per Carton 40 Carton Weight 11.00kgs / 24.25lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 40 pcs = 22640 pcs40HQ: 1314 cartons * 40 pcs = 52560 pcs
£238.99
-
Waveshare Waveshare Tracker Sensor, Infrared Line Tracking
1. 5-ch ITR20001/T infrared detector, high sensitivity, anti-jamming, stable performance2. High precision analog output, combined with PID control algorithm, allows the robot tracks lines more stableSpecifications1. Power: 3.3V ~ 5V2. Dimension: 78mm × 18mm3. Detector spacing: 16mm4. Mounting holes size: 3mm5. Detection range: 1cm ~ 5cmApplicationsRobot line trackingHow to UseIn the case of working with a MCU:- VCC ? 3.3V ~ 5V- GND ? GND- IR1 ? MCU.IO (ch1, analog output)- IR2 ? MCU.IO (ch2, analog output)- IR3 ? MCU.IO (ch3, analog output)- IR4 ? MCU.IO (ch4, analog output)- IR5 ? MCU.IO (ch5, analog output)Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 4cm * 2cm / 3.94inch * 1.57inch * 0.79inch Qty per Carton 1200 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 1200 pcs = 332400 pcs40HQ: 644 cartons * 1200 pcs = 772800 pcs
£3.99
-
Waveshare Waveshare Tuya T5-E1 1.75 Inch AMOLED Round Development Board QSPI Interface AI Large Models, Standard, GPS
1. Features an Armv8-M STAR-MC1 MCU with a clock speed of up to 480 MHz2. Supports 2.4 GHz Wi-Fi (802.11 b/g/n/ax) and Bluetooth 5.4 (Bluetooth LE), with an onboard antenna3. Features 640 KB of SRAM and 64 KB of ROM, with 16 MB of PSRAM in a stacked package and 8 MB of external Flash4. On-board 1.75-inch capacitive touch HD AMOLED display with 466 x 466 resolution and 16.7 million colors, capable of clearly displaying color images5. Built-in CO5300 driver chip and CST9217 capacitive touch chip, communicating via QSPI and I2C interfaces respectively, without occupying excessive interface pin resources6. Features a Type-C interface, enhancing user convenience and device compatibility7. On-board QMI8658 six-axis inertial measurement unit (3-axis accelerometer, 3-axis gyroscope), capable of detecting motion posture, step counting, and other functions8. On-board PCF85063 RTC chip, providing precise timekeeping and automatic leap year handling9. On-board PWR and KEY side buttons with customizable functions, facilitating the development of custom button features10. On-board 3.7V MX1.25 lithium battery charging and discharging interface11. On-board 8-pin 2.54mm pitch female header, exposing 5 GPIO pins and reserving 5 IO pads for external devices and debugging, enabling flexible configuration of peripheral functions12. On-board Micro SD card slot for flexible storage expansion and fast data transfer, suitable for data logging and media playback, simplifying circuit design13. Features an AMOLED display with higher contrast, wider viewing angles, rich colors, and fast response times for superior visual performance, while offering advantages such as a slim design, low power consumption, and flexibilityDisplay specifications1. Display panel: AMOLED2. Display size: 1.75 inches3. Display resolution: 466 x 466 pixels4. Display colors: 16.7M5. Display brightness: 700 cd/square meter6. Contrast ratio: 100,000:17. Communication interface: QSPI8. Driver IC: CO53009. Touch: supported10. Touch IC: CST9217Standard packaging list:- T5-E1-Touch-AMOLED-1.75 x 1- 8-ohm 2W speaker x 1GPS packaging list:- T5-E1-Touch-AMOLED-1.75-G (with GPS) x 1- 8-ohm 2W speaker x 1- GNSS ceramic antenna x 1Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 10cm * 8cm * 4cm / 3.94inch * 3.15inch * 1.57inch Qty per Carton 160 Carton Weight 18.00kgs / 39.68lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 160 pcs = 70080 pcs40HQ: 1018 cartons * 160 pcs = 162880 pcs
£36.99 - £44.99
You have seen 82 out of 82 products