Products

Features1. Spider High Temperature and High Flow Hotend Pro - High temperature and high flow printing, higher temperature resistant and faster speed. - High flow printing - Temperature up to 300 degree C - No modification required - Fast heat dissipation 2. Large Melting Zone, High-flow Printing - The overall melting zone is increased by 30% - (The melting zone length is 27.3mm), smooth printing even with 0.8mm nozzle 3. Support high-speed printing - The high-temperature heat-resistant insulation sheet is added to maintain the temperature ofthe melting zone - Supporting 300mm/s high-speed printing. - The titanium alloy screws were used to reduce the thermal conductivity by 30%,which can reduce the transfer of heat from the heating zone to the heat dissipation zone and ensure the smooth feeding 4. All-metal Design High Temperature Resistance Up to 300 degree C - All-metal design for better overall performance, support 300 degree C printing and compatible with various filaments such as PLA, ABS, PETG, TPU PP, PC, nylon, PEEK, PEl, etc. 5. Standardized Interface, No Modification Required - Small and exquisite external sizewith modular arc interface design,ready to use without modification. Easy installation and maintenance, compatible with most printers on the market 6. Strength Upgrade, Longer lifespan - The heat break and heat sink are perfect fit to avoid pressure between themand the strength is upgraded to extend the life of the hotend. 7. Structural Upgrade, Faster Heat Dissipation - The heat dissipation part adopts a split design to reduce heat transfer. - Red copper heat sink to improve heat dissipation efficiency 8. Material Upgrade for Better Printing - The heat break is made of titanium and copper allovswhich perfectly fit with each other,and 0.2mm thin wall thickness for excellent thermal insulation. - The heat block and nozzle are made of copper alloy, and roughness of Ra0.3 on the inner wall of the nozzle to improve print quality. 9. Compatible models: - For Ender-3 Pro / Ender-3 / Ender-3 V2 / Ender-5 / Ender-5 Pro / Ender-5 Plus Ender-3s / Ender-6 / Ender-4 / Ender-3 Max / Ender-2 Pro / Ender-2 / CR-10S CR-10 / CR-10 S5 / CR-10 S4 / CR-10 Mini / CR-20 / CR-20 Pro series printer.Specifications1. Nozzle: 0.4mm, 0.8mm x 7 2. Size: 66x22x23mm 3. N.W.: 61g 4. Color: Red 5. Compatible with Filament: PLA, ABS, PETG,TPU, PP,PC,PA,PEI,etc. 6. Support Filament Diameter: 01.75+/-0.05mm 7. Retraction distance: Up to 5mm(lt can beadjusted according to the printing situation) 8. Overall temperature resistance: 450 degree c (excluding silicone sleeve) 9. The inner diameter of the throat tube: 1.9mm 10. Nozzle, throat tube Ra: Ra less than or equal to 0.25 11. Applicable models: For Creality CR-10 / CR-10S / Ender-2 / Ender-3/ Ender-5 series printer.Package List1. Adapter x 1 pcs 2. Copper tube x 1 pcs 3. Thermistor x 1 pcs 4. Thermal grease x 1 pcs 5. Hexagonal wrench x 3 pcs 6. M3X20 screw x 2 pcs 7. M2 limit screw x 2 pcsSpecification: Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 9cm * 9cm * 5cm / 3.54inch * 3.54inch * 1.97inch Qty per Carton 100 Carton Weight 17.00kgs / 37.48lb Carton Size 47cm * 27cm * 37cm / 18.5inch * 10.63inch * 14.57inch Loading Container 20GP: 567 cartons * 100 pcs = 56700 pcs40HQ: 1318 cartons * 100 pcs = 131800 pcs

Read more less

1. Extrusion gears are closely matched with U-shaped bearings 2. The extrusion force is uniform to avoid slippage and grinding 3. All metal aluminum alloy 4. For 1.75mm filament 5. DIY aluminum block, easy to assemble 6. Product size: 16x89x162mm 7. Used in Creality 3D Ender-3 series, Ender series, CR-10 series, CR100 3D printerSpecification: Package Weight One Package Weight 0.07kgs / 0.14lb One Package Size 13cm * 15cm * 3cm / 5.12inch * 5.91inch * 1.18inch Qty per Carton 135 Carton Weight 9.18kgs / 20.24lb Carton Size 41cm * 48cm * 48cm / 16.14inch * 18.9inch * 18.9inch Loading Container 20GP: 282 cartons * 135 pcs = 38070 pcs40HQ: 655 cartons * 135 pcs = 88425 pcs

Read more less

1. Extrusion gears are closely matched with U-shaped bearings 2. The extrusion force is uniform to avoid slippage and grinding 3. All metal aluminum alloy, flexible adjustment of extruder gear pressure 4. Compatible with a variety of consumables, can print soft plastic consumables 5. DIY aluminum block, easy to assemble 6. Product size: 16x89x162mm 7. For Creality 3D Ender-3 series, CR-10 seriesSpecification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 13cm * 15cm * 4cm / 5.12inch * 5.91inch * 1.57inch Qty per Carton 60 Carton Weight 12.80kgs / 28.22lb Carton Size 41cm * 32cm * 48cm / 16.14inch * 12.6inch * 18.9inch Loading Container 20GP: 423 cartons * 60 pcs = 25380 pcs40HQ: 982 cartons * 60 pcs = 58920 pcs

Read more less

1. High hardness, durable and easy to clean 2. High viscosity, strong adsorption and no edge warping 3. Easy to remove the model manually, or easily remove the model with the help of the scraper of a large model 4. Flat, fast and uniform heating 5. The special coating is an inorganic coating with a hardness of 8 Mohs and can work at a temperature of 400 degrees Celsius. 6. Size: 235x235x3mm 7. Material: tempered glass 8. Suitable for Creality 3D printer Ender-3 / 3s / 3 Pro / 5/5 Pro / CR20 / CR20 ProSpecification: Package Weight One Package Weight 0.78kgs / 1.72lb One Package Size 29.5cm * 27cm * 4.5cm / 11.61inch * 10.63inch * 1.77inch Qty per Carton 10 Carton Weight 8.28kgs / 18.25lb Carton Size 32cm * 31cm * 42cm / 12.6inch * 12.2inch * 16.54inch Loading Container 20GP: 640 cartons * 10 pcs = 6400 pcs40HQ: 1485 cartons * 10 pcs = 14850 pcs

Read more less

Features1. Intelligent leveling-free technology. The CR-6 SE featuring an true leveling-free technology, this is a 3D Printer that lets you always rely on highly accurate results. 2. Photoelectric filament sensor: That basically mean that your CR-6 SE will keep your printing performance running smartly and smoothly. If the machine suddenly runs out of filament or if it simply breaks, the printers photoelectric filament sensor will instantly pick up that disruption and will stop the machine. As soon as the new filament feeds in, the CR-6 SE will resume its operation without making you lose your work. 3. Resume pringing functions. Did the power suddenly or accidentally go off? No worries, the CR-6 SE 3D Printer will resume printing if the power supply is interrupted. That is right, you can forget about starting over because print failure is no longer an issue. 4. Modular nozzle. The CR-6 SE is designed with a modular nozzle that means you can customize it. From the heat block to the nozzle tip, among other parts, this is a Modular 3D Printer that is easy to keep. 5. A dependable extruder. With its compact and reliable extruder, you know that a smoother extrusion and an easier filament feed will ultimately generate faster, quieter, and smoother prints. 6. Cut the noise. It is added a silent chipset to the CR-6 SE. Its trinamic driver helps to ensure that voltage control, fast movement, and printing in silence are a given. 7. Tempered glass plate. The CR-6 SE 3D printer comes with a carborundum glass hotbed platform that is flatter than aluminum and which offers a thermal performance that ensures quick heating up, strong adhesion, and prints that are easy to remove. 8. Strong stable and stylish. The CR-6 SE 3D printer work station has a beautiful design that compliments any desktop you use it on. Meanwhile, self-designed profiles and stepper motor cover prevent filament scraps and dust. The CR-6 SE also comes with a well-arranged ribbon cable that ensures safety issues are never a concern. 9. Reduced vibration for refined results. This printer is designed with a wider foundation and equipped with dual Z-axises matched with an adjustable timing belt that translates into reduced unwanted motion and improved refined results. So the stability of the machine and its performance is simply impressive. 10. No dust, neat and notable. CR-6 SE revamps in quite a distinguished look. From the bottom to the top, the flat aluminum profiles make the machine stylish and prevent dust. 11. Intuitive user experience. The CR-6 SE 3D printer features a 4.3 inch HD color LCD touch screen that allows you to easily and intuitively operate the device. Available in English and Chinese, and with a simplified and smart interface, this touch screen ensures that this printers user experience always equates to smooth sailing. 12. All-around safety. Hassle-free printing with over current protection, over-load protection, and thermal runaway protection. 13. A 3D printer you can carry. In fact, it features a convenient removable handle that makes it easy to carry whenever you need to. 14. All you need is within reach. User experience improved by optimized details like sealed aluminum profiles, foldable filament holder, tools storage box, belt tensioner.Parameters1. Molding technology: FDM 2. Print resolution: about 0.1mm 3. Nozzle diameter: 0.4mm(standard) 4. Nozzle temperature: about 260 Degrees Celsius 5. File transfer: USB/SD card 6. File formats: STL/OBJ/AMF 7. Motherboard: silent motherboard 8. Nominal power: 350W 9. Nominal voltage: AC 100-240V, 50/60Hz 10. Output voltage: DC 24V 11. Print speed: 80-100mm/s 12. Supported material: PLA/TPU/PETG/ABS/Wood 13. Print size: 23.5x23.5x25cm 14. Machine size: 44.2x46.2x54cmSpecification: Package Weight One Package Weight 14.20kgs / 31.31lb One Package Size 53cm * 50cm * 28cm / 20.87inch * 19.69inch * 11.02inch Qty per Carton 1 Carton Weight 15.50kgs / 34.17lb Carton Size 55cm * 52cm * 30cm / 21.65inch * 20.47inch * 11.81inch Loading Container 20GP: 310 cartons * 1 pcs = 310 pcs40HQ: 721 cartons * 1 pcs = 721 pcs

Read more less

1. With special power chip, support 24V power input 2. The circuit board is optimized by circuit, effectively solve the heating problem 3. Can work with E/Z/Y/X a-xis motor 4. With USB interface, easy to operate 5. For Ender-3 /3 Pro / 3V2 / 5 / 5 Pro Note: Ender-3 / Ender-3 Pro use the same main board but different firmwareSpecification: Package Weight One Package Weight 0.14kgs / 0.32lb One Package Size 16cm * 15cm * 6cm / 6.3inch * 5.91inch * 2.36inch Qty per Carton 80 Carton Weight 13.20kgs / 29.10lb Carton Size 50cm * 48cm * 54cm / 19.69inch * 18.9inch * 21.26inch Loading Container 20GP: 205 cartons * 80 pcs = 16400 pcs40HQ: 477 cartons * 80 pcs = 38160 pcs

Read more less

1. Support rod kit for 3D printer with aluminum profile structure. 2. Used to enhance the stability of the Z axis and improve the printing effect. 3. Compatible with Creality Ender-3 / Ender-3S / Ender-3 Pro / Ender-3 v2 or other similar structure 3d printers, the print size is 220x220x250mm. 4. The length of a single tie rod is 36.5cm, which is convenient to install and has a more stable structure. 5. Made of high-quality aluminum alloy material, strong and durable. 6. Product size: 56x63x471mmSpecification: Package Weight One Package Weight 0.81kgs / 1.78lb One Package Size 29cm * 14cm * 8cm / 11.42inch * 5.51inch * 3.15inch Qty per Carton 10 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 30cm * 31cm / 16.54inch * 11.81inch * 12.2inch Loading Container 20GP: 682 cartons * 10 pcs = 6820 pcs40HQ: 1584 cartons * 10 pcs = 15840 pcs

Read more less

1. Not easy to corrode in the air. 2. The hole size is accurate and the installation is convenient. 3. High temperature performance is stable and durable. 4. The leveling is simple, compact and does not take up space. 5. Material: aluminum alloy 6. Product size: 60x60x9mm 7. Suitable for FDM modelsSpecification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 13cm * 15cm * 4cm / 5.12inch * 5.91inch * 1.57inch Qty per Carton 90 Carton Weight 12.80kgs / 28.22lb Carton Size 41cm * 48cm * 42cm / 16.14inch * 18.9inch * 16.54inch Loading Container 20GP: 322 cartons * 90 pcs = 28980 pcs40HQ: 748 cartons * 90 pcs = 67320 pcs

Read more less

1. Flexible and detachable, firmly adsorb the magnet 2. The magnetic base can withstand a high temperature of 140?°C without losing its magnetism 3. Fast heater performance, reducing waiting time after printing 4. PEI powder coating, high temperature resistant and not easy to deform 5. Easy to use, bend the printing plate slightly, then remove the print after cooling 6. Size: 235x235mm 7. Suitable for Creality 3D printer Ender-3 / 3s / 3 Pro / 5/5 Pro / CR20 / CR20 ProSpecification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 29cm * 27cm * 5cm / 11.42inch * 10.63inch * 1.97inch Qty per Carton 20 Carton Weight 11.80kgs / 26.01lb Carton Size 31cm * 56cm * 52cm / 12.2inch * 22.05inch * 20.47inch Loading Container 20GP: 295 cartons * 20 pcs = 5900 pcs40HQ: 685 cartons * 20 pcs = 13700 pcs

Read more less