Products

1. Helps you diagnose and clean fuel injectors, easily identifying common faults such as stuck, clogged, leaking, or burned fuel injectors.2. Features two pulse output temperatures (two pairs of test leads) for simultaneous testing of two fuel injectors for comparison.3. This fuel injector tester kit features an LCD display and eight pulse modes, including four pulse signal output modes and two output voltage levels: short/medium/long/continuous pulse modes, and high/low (12V/5V) power drive modes.4. Helps you identify good and bad injectors with the engine off.5. Select any mode as needed, and its mode lock feature ensures consistent testing conditions.6. Compatible with 12V injectors from nearly all vehicle models, suitable for both EFI and GDI injectors.7. The power cord is up to 40 inches/100 cm long, and the test leads are 20 inches long, making it easy to connect and use.8. The wires are made of high-quality silicone for improved high and low temperature resistance.9. Powered by a 12V battery or an external DC 12V (minimum 1.5A recommended) power adapter.10. Operates with the engine off and works with any fuel pressure tester (Note: gasoline vehicles only, not diesel engines).11. Features power input reverse connection protection and output short-circuit protection. If the fuel injector is damaged or the pulse output terminal is short-circuited, the fuel injector cleaning tools power indicator will flash.Specification: Package Weight One Package Weight 0.28kgs / 0.62lb One Package Size 18cm * 13cm * 7cm / 7.09inch * 5.12inch * 2.76inch Qty per Carton 16 Carton Weight 5.60kgs / 12.35lb Carton Size 38cm * 28cm * 30cm / 14.96inch * 11.02inch * 11.81inch Loading Container 20GP: 835 cartons * 16 pcs = 13360 pcs40HQ: 1939 cartons * 16 pcs = 31024 pcs

Read more less

1. Can quickly detect whether your relay is normal, easy to use, suitable for automotive relays on the market, support 12V and 24V relay testing2. Most car lights, wipers, starters, air conditioners, electric seats, electric doors and windows, anti-lock brakes and audio use relays. Automotive relays are subject to vibration, high temperature, low temperature, humidity, etc., which will reduce their lifespan. However, once a relay fails, it will immediately cause system components to be paralyzed, and even cause the entire aircraft to be unusable. Therefore, it is very important to regularly check the relays in the car3. Through the continuous car battery to the relay coil, the detector can normally check the contact function of the relay4. The tester observes the contact data, closing time, relay inertia, etc. at each test stage5. Easy to operate, easy to carry, and durableOperation instructions:1. When testing, clamp the red clip to the positive pole of the battery and the black clip to the negative pole of the battery2. When testing a 12V relay, it needs to be connected to a 12V battery3. After connecting to the power supply, the device lights up red and the relay can be inserted4. To test the 4-pin relay, turn the switch to 4PIN, and to test the 5-pin relay, turn the switch to 5PIN5. After connecting the relay and adjusting the pin position switch, you can press the button6. If the pin position is incorrect or the relay is damaged during the test, the red LED light will be on7. When the pin position is set correctly, the tester will light up the green LED light and flash 10 times to indicate that the relay is normalSpecification: Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 19cm * 16cm * 4cm / 7.48inch * 6.3inch * 1.57inch Qty per Carton 32 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 34cm * 34cm / 15.75inch * 13.39inch * 13.39inch Loading Container 20GP: 576 cartons * 32 pcs = 18432 pcs40HQ: 1338 cartons * 32 pcs = 42816 pcs

Read more less

1. Working voltage 9-16V2. Working current 36~80mA3. Support nine standard protocols of OBD II/EOBD4. Plug and play, can quickly read the fault information and vehicle parameters of the car5. Enter the fault code to be queried, and you can quickly perform fault definition analysis6. Eight languages: English, German, Italian, Dutch, French, Spanish, Chinese, Russian7. I/M ready status: check whether the various sensors of the car are readySupported protocols:1. SAE J1850 PWM (41.6Kbaud)2. SAE J1850 VPW (10.4Kbaud)3. ISO9141-2 (5 baud init, 10.4Kbaud)4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud)Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 21cm * 16cm * 4cm / 8.27inch * 6.3inch * 1.57inch Qty per Carton 32 Carton Weight 10.70kgs / 23.59lb Carton Size 44cm * 34cm * 34cm / 17.32inch * 13.39inch * 13.39inch Loading Container 20GP: 524 cartons * 32 pcs = 16768 pcs40HQ: 1217 cartons * 32 pcs = 38944 pcs

Read more less

1. Working temperature: -20-60 degrees celsius2. Storage temperature: -30-70 degrees celsius3. Operating voltage: 12V4. Support language: English, German, French, Spanish, Italian, Russian, Dutch, Chinese, Japanese, Korean5. Reads and clears check engine light codes, both generic and manufacturer-specific, and resets the monitor6. Compact size, easy to carry7. 1.8-inch LCD display, data at a glance8. Size: about 137 x 64 x 23mm9. Weight: about 140gSpecification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 19cm * 15cm * 3cm / 7.48inch * 5.91inch * 1.18inch Qty per Carton 60 Carton Weight 12.00kgs / 26.46lb Carton Size 47cm * 39cm * 35cm / 18.5inch * 15.35inch * 13.78inch Loading Container 20GP: 415 cartons * 60 pcs = 24900 pcs40HQ: 964 cartons * 60 pcs = 57840 pcs

Read more less