Search results for "dji mic mount"

1. Mounts the receiver to the camera hot/cold shoe port2. When not in use, it can be stored in the charging case3. Adaptable product: for DJI Mic4. Packing list: adapter board x 15. Weight: about 2gSpecification: Package Weight One Package Weight 0.06kgs / 0.12lb One Package Size 8cm * 6cm * 3cm / 3.15inch * 2.36inch * 1.18inch Qty per Carton 500 Carton Weight 24.50kgs / 54.01lb Carton Size 30cm * 50cm * 56cm / 11.81inch * 19.69inch * 22.05inch Loading Container 20GP: 317 cartons * 500 pcs = 158500 pcs40HQ: 736 cartons * 500 pcs = 368000 pcs

Read more less

MIRA SALES • PREMIUM PRODUCT GUIDE Original DJI Mic Mini Mobile Phone Adapter USB-C / Type-C A compact original DJI adapter designed to connect compatible DJI Mic Mini equipment to a USB-C / Type-C mobile device. ✨ AT A GLANCE Original DJI accessory • USB-C / Type-C mobile connection • Compact plug-in adapter format • Designed for compatible DJI Mic Mini workflows 🔎 PRODUCT OVERVIEW A compact original DJI adapter designed to connect compatible DJI Mic Mini equipment to a USB-C / Type-C mobile device. This product is built around a clear everyday purpose, combining practical functionality with a clean, attractive form. The design and configuration shown on this page are intended to make the product straightforward to understand and easy to integrate into the relevant setup. Whether you are replacing an older accessory, improving an existing setup, preparing for travel, organising equipment or carrying out a repair, selecting the correct configuration is important. Review the compatibility information and product photographs carefully before ordering. ⭐ KEY FEATURES FEATURE 01 Original DJI accessory FEATURE 02 USB-C / Type-C mobile connection FEATURE 03 Compact plug-in adapter format FEATURE 04 Designed for compatible DJI Mic Mini workflows 🛠 DESIGNED FOR PRACTICAL EVERYDAY USE Compatibility depends on the phone, operating system and DJI equipment being used. Confirm your device connection before ordering. The product's form factor has been presented to highlight its intended use while keeping the overall experience practical and convenient. The accompanying photographs provide a closer look at the physical design and available configuration. For the best experience, use the product only for its intended purpose and follow any relevant device, manufacturer or safety guidance. Where compatibility matters, compare your exact device, connector, dimensions or configuration rather than relying only on a general category description. 📋 PRODUCT DETAILS Compatibility / Application: Compatible USB-C / Type-C mobile devices and DJI Mic Mini equipment Key Specifications: Original DJI accessory; USB-C / Type-C mobile connection; Compact plug-in adapter format; Designed for compatible DJI Mic Mini workflows. Product Design: Purpose-built for the application described above with an emphasis on practical handling and everyday convenience. Configuration: Select the correct available variant where multiple options are offered. 💎 WHY YOU'LL LIKE IT The product brings together useful functionality and a purpose-built design in a format that is easy to understand and use. It is particularly suited to customers who prefer a dedicated solution with clearly defined features rather than a generic alternative. 🎯 BEST FOR Compatible USB-C / Type-C mobile devices and DJI Mic Mini equipment. It is a practical addition for customers who want the functionality, convenience and appearance described above. 📸 PRODUCT PHOTOS Explore the product photographs below for a closer look at the design, construction and available configuration. Images are displayed at a comfortable medium size. 🛍 MIRA SALES TIP Take a moment to verify the exact model, generation, dimensions, connector, installation method, colour or configuration relevant to your purchase. Choosing the correct variant first helps avoid compatibility issues and ensures the product matches your intended setup. ⚠ IMPORTANT INFORMATION Product specifications and compatibility can vary by device, variant and application. Always confirm the information relevant to your setup before ordering. Specialist repair parts should be installed by appropriately experienced users or technicians. Electrical and vehicle-related products should be used according to applicable safety guidance. For the rolling accessory, use only for lawful purposes and comply with applicable local regulations. ✅ BEFORE YOU ORDER Check compatibility with your exact device or application. Select the correct variant, colour, generation or configuration. Compare connector types and physical dimensions where relevant. Use the product photographs as a visual reference. Follow appropriate manufacturer and safety guidance for specialist products. Mira Sales • Practical Products. Clear Information. We bring the important product information, compatibility guidance and product photography together so you can understand the product clearly before ordering.

Read more less

MIRA SALES | DJI ACCESSORYOriginal Clip Magnet for DJI Mic Mini A compact black clip magnet designed for DJI Mic Mini, supplied as a maintenance accessory. ⭐ MIRA SALES TIP Check that you use the DJI Mic Mini before ordering. This listing is for the clip magnet accessory only and comes without color-box packaging. DJI Mic MiniCompatible product BlackClip magnet ~4gAccessory weight 1 ×Clip magnet Key Features DJI Mic Mini Compatible Listed specifically for DJI Mic Mini. Maintenance Accessory Designed as a replacement/maintenance clip magnet for the compatible system. Lightweight Approximate accessory weight is 4g. Simple Package The supplied package contains one black clip magnet. Product Image More Product Photos Key Specifications Compatible With DJI Mic Mini Color Black Weight Approx. 4g Package 1 × Clip Magnet Package & Variant1 × Original Clip Magnet, Black. SKU: TBD06063214.

Read more less

1. Magnetic Quick Release: Strong dual-sided magnets enable fast mounting and removal without interference. 2. Dual Locking Design: Metal clip with dual-claw buckle keeps your device securely in place. 3. Durable Construction: Aluminum alloy claws resist wear for long-term stability. 4. Cold Shoe Expansion: Conveniently attach microphones, LED lights, or other accessories. 5. Portable & Lightweight: Easy to carry and ideal for on-the-go filming. 6. Net weight: 21.8 gramsSpecification: General Compatible with DJI: Osmo Nano Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 7cm * 4cm * 2.5cm / 2.76inch * 1.57inch * 0.98inch Qty per Carton 400 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 30cm * 27cm / 16.54inch * 11.81inch * 10.63inch Loading Container 20GP: 783 cartons * 400 pcs = 313200 pcs40HQ: 1819 cartons * 400 pcs = 727600 pcs

Read more less

1. DJI Mic 3 Magnetic Clip 2. Note: This is a spare part and will be shipped separately without retail packaging. 3. Weight: Approx. 3g 4. Compatible with: DJI Mic 3 5. Package Contents: Magnetic Clip ×1Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 4.90kgs / 10.80lb Carton Size 42cm * 34cm * 32cm / 16.54inch * 13.39inch * 12.6inch Loading Container 20GP: 583 cartons * 96 pcs = 55968 pcs40HQ: 1354 cartons * 96 pcs = 129984 pcs

Read more less

1. Powerful wireless radio system, which can achieve a wireless radio distance of up to 250 meters2. The transmitter can record, regardless of human voice, ambient sound or instrument sound, it can be recorded clearly, and it has built-in storage, which can be used as a recording pen alone, and can also back up the sound during recording to ensure the integrity of the recording data3. The charging box can quickly pair the receiver and the transmitter, and charge them in real time. It can also store some accessories in one piece. It is easy to carry and fully charged after opening the cover.4. The two transmitters can record at the same time, and have built-in storage, which can record independently, and you can use it as a recording pen; it also supports sound backup to ensure the integrity of the recording data to the greatest extent5. The transmitter adopts a clip-back design and is equipped with magnetic accessories, which can be easily fixed on clothes. The receiver can also be mounted on the cold shoe/hot shoe with the help of the hot shoe conversion plate, and the installation is very flexible6. The receiver supports USB-C, Lightning and 3.5mm TRS interface output, compatible with mainstream mobile phones, various cameras and computers7. Standard charging box (optional), with a sense of security, the charging box can charge the receiver and transmitter in real time, the battery life is up to 15 hours, and the creation is not limitedLauncher:1. Dimensions: Length 47.32mm, Width 30.43mm, Height 20.01mm2. Weight: 30g3. Wireless mode: GFSK 1 Mbps and 2 Mbps4. Operating frequency: 2400 MHz to 2483.5 MHz5. Battery type: LiPo 1S6. Battery capacity: 320mAh7. Battery power: 1.23 Wh8. Battery voltage: 3.85 volts9. Charging time: 1 hour 10 minutes10. Working time: 5.5 hoursReceiver:1. Dimensions: Length 47.44mm, Width 32.21mm, Height 17.35mm2. Weight: 24.9 grams3. Wireless mode: GFSK 1 Mbps and 2 Mbps4. Operating frequency: 2400 MHz to 2483.5 MHz5. Battery type: LiPo 1S6. Battery capacity: 320mAh7. Battery power: 1.23 Wh8. Battery voltage: 3.85 volts9. Charging time: 1 hour 10 minutes10. Working time: 5 hoursCharging case:1. Dimensions: Length 103.06mm, Width 61.87mm, Height 41.50mm2. Weight: 162.2 grams3. Battery type: LiPo 1S4. Battery capacity: 2600mAh5. Battery power: 10 Wh6. Battery voltage: 3.87 volts7. Charging time: 2 hours and 40 minutes8. Working time: 3 charges at the same time, about 1.8 times of charging9. General: microphone directivity10. Low cut off: 50 Hz to 20 kHz11. Low cut function on: 150 Hz to 20 kHz12. Sound pressure level (MAX): 114 dB SPL13. Input level (3.5mm): -17 dBV14. Equivalent noise: 23 dBA15. Output power (MAX): 22 mW@1 kHz, 32 Ω16. Transmission distance (MAX): 250 meters (FCC); 160 meters (CE) measured in an open outdoor environment without interferenceSpecification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 20cm * 20cm * 8cm / 7.87inch * 7.87inch * 3.15inch Qty per Carton 226 Carton Weight 47.01kgs / 103.63lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 226 pcs = 40002 pcs40HQ: 412 cartons * 226 pcs = 93112 pcs

Read more less

1. Small and light, no sense of wearing2. High-quality audio, stable transmission3. Charging box has a long battery life of 48 hours4. Direct connection to DJI OsmoAudio products, original sound quality5. Active noise reduction, two adjustable levels6. Automatic limiter, anti-explosive soundTechnical parameters:--DJI Mic Mini transmitter1. Dimensions: 26.55 mm long, 26.06 mm wide, 15.96 mm high2. Weight: about 10 grams (without magnetic sheet)3. Wireless mode: GFSK 2Mbps4. Equivalent isotropic radiated power (EIRP): less than 20 dBm5. Wireless mode operating frequency: 2.4000 GHz to 2.4835 GHz6. Bluetooth protocol: Bluetooth 5.37. Bluetooth operating frequency: 2.4000 GHz to 2.4835 GHz8. Bluetooth transmission power (EIRP): less than 20 dBm9. Battery type: Li-ion10. Battery capacity: 114 mAh11. Battery energy: 0.44 Wh12. Battery voltage: 3.87 V13. Charging specification: maximum 5 V14. Charging environment temperature: 5- 45 degrees Celsius15. Working environment temperature: -10- 45 degrees Celsius16. Charging time: about 90 minutes17. Working time: about 11.5 hours (using DJI Mic Mini (one transmit and one receive), without noise reduction function, in a non-interference environment, close-range sound reception, transmitter and receiver connected, and receiver connected to the camera with a 3.5 mm cable.)--DJI Mic Mini receiver1. Size length 46.50 mm, width 29.61 mm, height 19.32 mm2. Weight: about 17.8 grams (including interface cover)3. Wireless mode: GFSK 2Mbps4. Equivalent isotropic radiated power (EIRP): less than 20 dBm5. Operating frequency: 2.4000 GHz to 2.4835 GHz6. Bluetooth protocol: Bluetooth 5.37. Bluetooth transmission power (EIRP): less than 20 dBm8. Bluetooth operating frequency: 2.4000 GHz to 2.4835 GHz9. Battery type: Li-ion10. Battery capacity: 170 mAh11. Battery energy: 0.66 Wh12. Battery voltage: 3.87 V13. Charging specifications: maximum 5 V14. Charging environment temperature: 5- 45 degrees Celsius15. Operating environment temperature: -10- 45 degrees Celsius16. Charging time: about 100 minutes17. Working time: about 10.5 hours (measured when using DJI Mic Mini (one transmitter and one receiver), noise reduction function is not turned on, receiving sound at close range in an interference-free environment, with the transmitter and receiver connected, and the receiver connected to the camera with a 3.5mm cable). ）DJI Mic Mini charging case1. Dimensions: 96.10 mm long, 41.00 mm wide, 59.35 mm high2. Weight: about 139 g (charging case only)3. Battery type: Li-ion4. Battery capacity: 1950 mAh5. Battery energy: 7.55 Wh6. Battery voltage: 3.87 V7. Charging specifications: 5 V maximum, 1.5 A to 2 A8. Charging ambient temperature: 5- 40 degrees Celsius9. Operating ambient temperature: 5-45 degrees Celsius10. Charging time: about 2 hours11. Number of times the charging case can charge the transmitter and receiver: 2 transmitters and 1 receiver can be fully charged about 3.6 times with a fully charged charging caseSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15cm * 10cm * 8cm / 5.91inch * 3.94inch * 3.15inch Qty per Carton 36 Carton Weight 8.30kgs / 18.30lb Carton Size 32cm * 32cm * 50cm / 12.6inch * 12.6inch * 19.69inch Loading Container 20GP: 520 cartons * 36 pcs = 18720 pcs40HQ: 1209 cartons * 36 pcs = 43524 pcs

Read more less

1. Powerful Magnetic Base (N35 Neodymium Magnet): Built-in N35 high-performance neodymium magnet provides a vertical pull-off force of up to 17kg, securely attaching to any ferrous surface such as car hoods, metal frames, and refrigerator doors, ensuring high stability even during motion filming. 2. Injection Molding and Rubber Coating (Scratch-proof and Waterproof): Features an ABS and iron internal structure, externally covered with waterproof rubber through injection molding. This design not only provides excellent waterproofing but also effectively increases friction and protects the attached surface (such as car paint) from scratches. 3. 360 Degree Universal Adjustment (Pea Pod Design): Equipped with a dual ball-head "pea pod" bracket, supporting 360-degree omnidirectional angle adjustment, easily enabling horizontal, vertical, or tilt shooting to meet various creative compositional needs. 4. Wide Compatibility (1/4-inch Interface): The top features a standard 1/4-inch threaded interface, compatible with mainstream action cameras such as for GoPro, Insta360, and DJI Action, as well as various fill lights or phone clips (adapter required), offering strong expandability. 5. High-Temperature Use Warning: To ensure the long-lasting effectiveness of the magnet and the stability of the rubber material, please use the product in environments below 75 degrees Celsius to avoid magnetic force attenuation or product deformation caused by high temperatures.Specification: General Compatible with DJI: Osmo Action 6, Osmo Nano, Osmo 360, Osmo Action 5 Pro, Osmo Action 4, Osmo Action 3, Action 2, Osmo Action Gopro: MISSION 1 PRO, MISSION 1 PRO ILS, MISSION 1, LIT HERO, MAX2, HERO (2024), HERO13 Black, HERO12 Black, HERO11 Black Mini, HERO11 Black, HERO10 Black, HERO9 Black, HERO8 Black, MAX, HERO7 White, HERO7 Black, HERO7 Silver, NEW HERO, Fusion, HERO6 Black, HERO5 Black, HERO5 Session, Hero Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO Insta360: X4 Air, GO Ultra, X5, Ace Pro 2, GO 3S, X4, Ace, Ace Pro, GO 3, X3, ONE RS 1-Inch 360 Edition, Insta360 ONE RS 4K Edition, Insta360 ONE RS 360 Edition, Insta360 ONE RS 1-INCH EDITION, ONE X2, ONE R, ONE X Package Weight One Package Weight 0.19kgs / 0.42lb One Package Size 7cm * 7cm * 5.5cm / 2.76inch * 2.76inch * 2.17inch Qty per Carton 80 Carton Weight 15.80kgs / 34.83lb Carton Size 42cm * 32cm * 26cm / 16.54inch * 12.6inch * 10.24inch Loading Container 20GP: 763 cartons * 80 pcs = 61040 pcs40HQ: 1771 cartons * 80 pcs = 141680 pcs

Read more less

1. With anti-wind noise reduction, dust and spit prevention function2. Installed in the DJI Mic transmitter, can effectively reduce wind noise3. Wear it outdoors or in windy environments to minimize the effects of wind noise during recording4. Adaptable product: DJI Mic5. Packing list: windproof fur cover x 16. Weight: about 1.1gSpecification: Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 6cm * 4cm * 4cm / 2.36inch * 1.57inch * 1.57inch Qty per Carton 500 Carton Weight 4.50kgs / 9.92lb Carton Size 47cm * 31cm * 31cm / 18.5inch * 12.2inch * 12.2inch Loading Container 20GP: 590 cartons * 500 pcs = 295000 pcs40HQ: 1370 cartons * 500 pcs = 685000 pcs

Read more less

1. Made of high quality ABS material. 2. This item is used with the camera mount, like as helmet straps. 3. Easy to install and remove. 4. A good choice for your chest belt strap and helmet. 5. Safely secure your camera on a vertical surface like a car bumper, wall, back of helmet, or similar. 6. Good for skiing, snowboarding, surfing, any action sport.Specification: General Compatible with DJI: Osmo Action 6, Osmo Nano, Osmo 360, Osmo Action 5 Pro, Osmo Action 4, Osmo Action 3, Action 2, Osmo Action Gopro: MISSION 1 PRO, MISSION 1 PRO ILS, MISSION 1, LIT HERO, MAX2, HERO (2024), HERO13 Black, HERO12 Black, HERO11 Black Mini, HERO11 Black, HERO10 Black, HERO9 Black, HERO8 Black, MAX, HERO7 White, HERO7 Black, HERO7 Silver, NEW HERO, Fusion, HERO6 Black, HERO5 Black, HERO5 Session, Hero Session, HERO4 Session, HERO4, HERO3+, HERO3, HERO2, HERO Insta360: X4 Air, GO Ultra, X5, Ace Pro 2, GO 3S, X4, Ace, Ace Pro, GO 3, X3, ONE RS 1-Inch 360 Edition, Insta360 ONE RS 1-INCH EDITION, Insta360 ONE RS 4K Edition, Insta360 ONE RS 360 Edition, ONE X2, ONE R, ONE X Material ABS Size 5*3.2*4cm Weight 16g Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 300 Carton Weight 12.00kgs / 26.46lb Carton Size 36cm * 22cm * 37cm / 14.17inch * 8.66inch * 14.57inch Loading Container 20GP: 910 cartons * 300 pcs = 273000 pcs40HQ: 2112 cartons * 300 pcs = 633600 pcs

Read more less