Search results for "electronics cleaning kit"

1. Capacity: 360ml 2. Size: 32 x 5.5cm 3. Weight: 1.55kg 4. Power supply mode: USB 5. Rated voltage: 8V 6. Rated power: 9W 7. Rated frequency: 60Hz 8. Applicable area: 120-150 square meters 9. Working time: 90 minutes 10. Charging time: 3-4 hours 11. Battery capacity: 2000mAh 12. Features: Visual navigation, strong suction, integrated sweep, suction and drag, slim body, 2.4G remote control, path planning, intelligent sterilization, extended side brush, anti-collision induction 13. Motor suction: 2800paSpecification: Package Weight One Package Weight 2.00kgs / 4.42lb One Package Size 35cm * 35cm * 10cm / 13.78inch * 13.78inch * 3.94inch Qty per Carton 4 Carton Weight 9.50kgs / 20.94lb Carton Size 37cm * 37cm * 42cm / 14.57inch * 14.57inch * 16.54inch Loading Container 20GP: 463 cartons * 4 pcs = 1852 pcs40HQ: 1076 cartons * 4 pcs = 4304 pcs

Read more less

1. Before purchasing, please check the model number on the back of the notebook: Axxxx, and confirm the regional version of the notebook.2. Protective shell material: polycarbonate; keyboard membrane material: TPU; dust plug material: silicone.3. Two-piece design, easy to install and remove; four rubber feet keep your laptop stable and safe; the bottom shell cover is ventilated to facilitate heat dissipation.4. Full access to all buttons and functions.5. The 0.13mm thick keyboard membrane is thin and light, fits the keyboard accurately, and has no effect on typing.6. Prevent dust from entering the laptop; it is washable and easy to clean.Specification: General Compatible with Apple: MacBook Pro 16 inch (2141) Package Weight One Package Weight 0.47kgs / 1.03lb One Package Size 37.5cm * 26.2cm * 3cm / 14.76inch * 10.31inch * 1.18inch Qty per Carton 64 Carton Weight 30.00kgs / 66.14lb Carton Size 90cm * 90cm * 23cm / 35.43inch * 35.43inch * 9.06inch Loading Container 20GP: 143 cartons * 64 pcs = 9152 pcs40HQ: 332 cartons * 64 pcs = 21248 pcs

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Apple Watch SE 2022 40mm 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Apple: Watch SE 2022 40mm Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 20cm * 10cm * 3cm / 7.87inch * 3.94inch * 1.18inch Qty per Carton 40 Carton Weight 4.20kgs / 9.26lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 40 pcs = 24800 pcs40HQ: 1439 cartons * 40 pcs = 57560 pcs

Read more less

1. 2.9 inch capacitive touch ePaper module, 296??128 resolution 2. 5-points touch support, user-defined wakeup gesture 3. No backlight, keeps displaying last content for a long time even when power down 4. Ultra low power consumption, basically power is only required for refreshing 5. SPI / I2C interface, requires minimal IO pins 6. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 15.40kgs / 33.95lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 200 pcs = 187800 pcs40HQ: 2180 cartons * 200 pcs = 436000 pcs

Read more less

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for OPPO A74 4G / Reno5 Z / A94 5G. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Specification: General Compatible with OPPO: A94 5G, A74, Reno5 Z Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly with frame for ZTE Axon 10 Pro (4G Version) 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. Specification: General Compatible with ZTE: Axon 10 Pro 5G Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Read more less

1. It provides a rich set of human-machine interface (HMI) interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, and TWAI, and also supports USB OTG 2.0 HS. It integrates an RJ45 Ethernet interface with PoE functionality.2. Equipped with peripherals such as USB 2.0, MIPI-CSI/MIPI-DSI, and H.264 encoding, it meets the needs of low-cost, high-performance, and low-power multimedia development.3. The ESP32-P4 integrates a digital signature peripheral and a dedicated key management unit to ensure data and operation security.4. The ESP32-P4-WIFI6-POE-ETH is designed for high-performance and high-security applications, meeting the needs of embedded systems in human-machine interaction, edge computing, and I/O expansion.5. Powerful image and voice processing capabilities, with image and voice processing interfaces including JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder.6. The board provides common peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 SD card slot, microphone, speaker terminals, and RTC battery terminals.7. The board features a 2 × 20 pin header, providing 28 remaining programmable GPIOs.8. Security mechanisms include secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It also supports hardware access protection, enabling access permission management (APM) and privilege separation.9. The development board uses the ESP32-P4-Core module, stacked with 32MB PSRAM, and has 32MB Nor Flash onboard.10. Supports Wi-Fi 6 and Bluetooth modules, with an onboard ESP32-C6-MINI module, extending 2.4GHz Wi-Fi 6 and Bluetooth 5 capabilities to the ESP32-P4. (LE), communicates using the SDIO interface protocol, ensuring stable connection and efficient transmission.11. Integrated PoE module provides more flexible power supply options for the development board.12. Only one network cable connected to a PoE device is needed for the ESP32-P4-WIFI6-POE-ETH to achieve both networking and power supply.13. Dimensions: 55x68mmRaspberry Pi camera module B:1. Image sensor: OV56472. CMOS size: 1/4 inch3. Pixels: 5 million4. Aperture: F2.05. Focal length: 6mm6. Diagonal field of view: 60.6 degrees7. Infrared night vision: not supported8. Focusing method: manual focusPackage contents:ESP32-P4-WIFI6-POE-ETH x 1SH1.0 4PIN connecting cable (approx. 150mm) x 21217 cavity speaker 8Ω 2W x 12.4G antenna x 1RPi camera (B) x 1FFC 15PIN ribbon cable x 1Screw pack x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch Qty per Carton 72 Carton Weight 15.50kgs / 34.17lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 72 pcs = 44640 pcs40HQ: 1439 cartons * 72 pcs = 103608 pcs

Read more less

1. Built-in battery, used for alarm when 12V power supply fails2. With a USB programming board, you can set 1000 numbers at one time through the software, saving a lot of SMS setting fees3. Built-in a hidden one-way alarm input, which can be connected to a switch signal for alarm4. Suitable for various automatic doors, electric doors, garage doors and other automatic access control systems5. This version is a 2G version, not a 3G or 4G version, please confirm whether the relevant country can use it before purchasing6. Digital output: NC/NO7. DC power supply: 9-15V DC/2A8. Power consumption: 12V MAX9. Input: 50mA/average 25mA10. Antenna: 50Ω SMA antenna interface11. Temperature range: -20~+60 degrees Celsius12. Humidity range: relative humidity 90%Specification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 15cm * 14cm * 5cm / 5.91inch * 5.51inch * 1.97inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs40HQ: 412 cartons * 74 pcs = 30488 pcs

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly (AMOLED Material) for OPPO Reno4 SE(China) / Realme 7 Pro / Realme Q2 Pro / Realme X7 5G / RMX2170, PEAM00, PEAT00 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with OPPO: Reno4 SE Realme: X7, 7 Pro Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Read more less

1. Material: High-quality steel2. Process: ABS engineering plastics3. Calibration process: laser calibration4. Resolution: 0.001mm5. Packaging: New plastic packaging6. Size: 16x6cm7. High-definition LED screen, digital display is clearer8. Precise measurement, efficient and stable9. 3V large capacity battery, lasting power10. Mechanical laser scale, can be used without electricitySpecification: Package Weight One Package Weight 0.45kgs / 1.00lb One Package Size 24cm * 10cm * 5cm / 9.45inch * 3.94inch * 1.97inch Qty per Carton 60 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 60 pcs = 10620 pcs40HQ: 412 cartons * 60 pcs = 24720 pcs

Read more less

1. CPU: H618 Quadcore cortex-A53 frequency: 1.5G2. GPU: Mali-G31 MP2 3. Flash: 16/32/64 GB4. SDRAM: 2/4GB5. Power supply: DC 5V/2A6. OS: Android 12.07. KODI: 18.18. WiFi: 2.4G +5G+BT5.0 WiFi69. 3D: Hardware 3D graphics acceleration 10. Support decoder format: - VP9-10 Profile-2 up to 8K- H.265 HEVC MP-10 L5.1 up to 8K- AVS2 JiZhun 10-bit decoder up to 4K 60fps- H.264 AVC HP L5.1 up to 4Kx2K 30fps- H.264 MVC up to 1080P 60fps- MPEG-4 ASP L5 up to 1080P 60fps (ISO-14496)- WMV/VC-1 SP/MP/AP up to 1080P 60fps- AVS-P16(AVS+) /AVS-P2 JiZhun Profile up to 1080P 60fps- MPEG-2 MP/HL up to 1080P 60fps (ISO-13818)- MPEG-1 MP/HL up to 1080P 60fps (ISO-11172)- RealVideo 8/9/10 up to 1080P 60fps- WebM up to VGA- MJPEG and JPEG unlimited pixel resolution decoding (ISO/IEC-10918)- Supports JPEG thumbnail, scaling, rotation and transition effects- Supports mkv, wmv, mpg, mpeg, dat, avi, mov, iso, mp4, rm andjpg file- HD MPEG1/2/4, H.264, HD AVC/VC-1, RM/RMVB, Xvid/DivX3/4/5/6 , RealVideo8/9/1011. Support media format: Avi / Rm / Rmvb / Ts / Vob / Mkv / Mov / ISO / wmv / asf / flv/dat / mpg / mpeg12. Support music format: MP3 / WMA / AAC / WAV / OGG / AC3 / DDP / TrueHD / DTS / HD / FLAC / APE13. Support photo format: HD JPEG / BMP / GIF / PNG / TIFF 14. USB host:2 USB 2.015. Card reader: SD/SDHC/MMC cards16. HDD file system: FAT16/FAT32/NTFS17. Support subtitle: SRT / SMI / SUB / SSA / IDX+USB18. High difinition video output: SD / HD max. 8K pixel 19. OSD type of languages: English / French / German / Spanish / Italian / etc multilateral languages20. LAN: ethernet standard 10/100M RJ-4521. Mouse / Keyboard: support mouse and keyboard via USB, support 2.4GHz wireless mouse and keyboard via 2.4GHz USB dongle22. HDMI: CEC and HDCP 2,2,4K 60fps max resolution output23. HD decoding: 8K 6K 4K 2K H.265 hardware video decode24. 1080P/AV/3G: support25. Network function: Skype chatting, Picasa, Youtube, Flicker, Facebook, Online movies, etc26. Other feature: free internet searching, thousands of android applications, many kinds of games, etc.Specification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 21cm * 13.7cm * 5.5cm / 8.27inch * 5.39inch * 2.17inch Qty per Carton 30 Carton Weight 13.00kgs / 28.66lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 30 pcs = 15420 pcs40HQ: 1194 cartons * 30 pcs = 35820 pcs

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly with frame for OPPO Reno5 Pro 5G 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with OPPO: Reno5 Pro 5G Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Read more less