Search results for "relay module"

1. The wiring harness of the water resistant switch a two drag with loudspeaker group line connector, each group can control two line lights. 2. Between the switch and the control line with self-locking terminals connected to the terminal with a jacket, to prevent short circuits. At the same time, this terminal can be directly in the original position control of the lights, so that you can use the original car switch to control the new lights. 3. Connect the red + battery + fuse cable; connect the black cable of the relay to the battery. 4. Connect the relay bar lights cable(red / black correspond to bar wire lights). 5. Connect the black-switch cable to the battery or system from any place in your car to get the power to the switch. 6. Turn on / off switch button to test the bar lights. 7. Prohibit the lamp connected directly, because the car comes with the power of the lamp is relatively small, the original line can only withstand a smaller source, if it is forced to rise, will make the circuit burned or accelerated aging line.Specification: General Bulb Base H11 Material Plastic Voltage (V) DC 12V Product Size 150cm Weight 160g Package Weight One Package Weight 0.17kgs / 0.38lb One Package Size 12cm * 4cm * 4cm / 4.72inch * 1.57inch * 1.57inch Qty per Carton 20 Carton Weight 4.13kgs / 9.10lb Carton Size 26cm * 26cm * 30cm / 10.24inch * 10.24inch * 11.81inch Loading Container 20GP: 1314 cartons * 20 pcs = 26280 pcs40HQ: 3052 cartons * 20 pcs = 61040 pcs

Read more less

1. Use the digital mobile radio (DMR) layer 2 standard protocol. It is compatible with other brands and models of popular MOTO TRBO series Tier I and II that use standard encryption and other DMR-enabled radios. It is also compatible with any existing analog two-way radios operating on supported UHF and VHF frequencies and can be easily ported to digital technology. Almost all operations can be done through the wireless keyboard2. It also has many functions, such as send/receive interrupt, CTCSS&DCS, VOX, surveillance, emergency alert, scan, key lock, TOT, password lock, power saving, remote kill/stun/activate, analog and digital combination, LED Indicator lights, voice prompts, etc.3. Frequency: 136-174&400-480MHz&76-107.95MHz (receive only)4. Channel: 30005. Working voltage: 7.4V DC6. Battery capacity: 3200mAh7. Antenna impedance: 50 ohms8. Size: 150 x 64x 40mm9. Weight: 360g (including battery)Transmitter:1. Power: UHF: 8w: 4w: 1w, VHF: 10w: 5w: 1w2. Frequency stability: +/-1.0ppm3. FM modulation mode: 12.5KHz@11K0F3E 25KHz @ 16K0F3E4. Modulation distortion: less than 5%5. Vocoder: AMBE + 2TM6. Adjacent channel power: 60dBm@12.5KHz 65dBm @ 25KHz7. Audio response: +1 to -3dB8. Digital protocol: ETSI-TS102 361-1, -2, -3Receiver:1. Digital sensitivity: 0.30uV / -117dBm (BER 5%), 0.70uV / -110dBm (bit error rate 1%)2. Adjacent channel selectivity: TIA603C: 65dB ETSI: 60dB3. Spurious response: TIA603C: 75dB ETSI: 70dB4. Audio response: +1 to -3dB5. Rated audio distortion: less than or equal to 3% (type)6. Audio power: greater than or equal to 500mWSpecification: General Model HD1 Frequency Range VHF 136MHz-174MHz, UHF 400MHz-480MHz Antenna Impedance 50 ohms Voltage 7.4V Plug Available EU Plug Audio Response +1 to -3dB Size 150 x 64x 40mm Weight 360g Receiver Parameters Adjacent Channel Selectivity 65dB, 60dB Package Weight One Package Weight 0.81kgs / 1.78lb One Package Size 20cm * 16cm * 9cm / 7.87inch * 6.3inch * 3.54inch Qty per Carton 20 Carton Weight 17.60kgs / 38.80lb Carton Size 40cm * 32cm * 45cm / 15.75inch * 12.6inch * 17.72inch Loading Container 20GP: 462 cartons * 20 pcs = 9240 pcs40HQ: 1074 cartons * 20 pcs = 21480 pcs

Read more less

1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards2. 1-Ch CAN, adopts MCP2515 controller and CAN transceiver, converts SPI to CAN3. 2-Ch RS485, adopts SC16IS752+SP3485 dual-chip combination, converts SPI to RS4854. Onboard power conversion circuit, supports 8~28V wide voltage power supply, can power the Raspberry Pi at the same time5. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal6. Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption7. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic8. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance9. Onboard 120Ω terminal resistor, configured by jumper10. Onboard terminals and pin headers, more convenient connection11. Breakout SPI control pins, for connecting with host control boardsSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 8cm * 6cm * 3cm / 3.15inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 41.00kgs / 90.39lb Carton Size 34cm * 32cm * 32cm / 13.39inch * 12.6inch * 12.6inch Loading Container 20GP: 765 cartons * 200 pcs = 153000 pcs40HQ: 1778 cartons * 200 pcs = 355600 pcs

Read more less

1. Compatible with Alexa and Google Home to manage your devices. 2. RF switch is a Sonoff version with a 433MHz RF receiver module inside.This wireless switch can be used together with the RF remote controller, which enables you to control appliances in indoor environment. 3. The remote control switch allows users remote turn on/off connected appliances via app eWeLink from anywhere in the world. 4. Sonoff transmits data to a cloud platform through the Wi-Fi Router, which enables you to remotely control the connected appliances, via free eWeLink App. You can download the iOS version in App Store and the Android version in Google Play. The App eWeLink enables you to control your devices easily. 5. Share control with your family and friends. Also you can DIY set this buy yourself easy handling and can be activated immediately and stably. 6. Timing function: Another feature available if to set timing schedules for the appliances, which can include countdown, scheduled on/off . It's simple, giving you one less thing to worry about in your busy life.Specification: General Material ABS Input Voltage AC 90-250V 50/60Hz Max Load 10A RF Frequency 433MHz WiFi IEEE 802.11b/g/n Certifications CE, ROHS Product Size 8.8*3.9*2.3cm Product Weight 47g Package Include Package Contents 1 x Smart Switch 1 x Screw Set Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 10cm * 5cm * 2.5cm / 3.94inch * 1.97inch * 0.98inch Qty per Carton 100 Carton Weight 7.20kgs / 15.87lb Carton Size 42cm * 27cm * 27cm / 16.54inch * 10.63inch * 10.63inch Loading Container 20GP: 870 cartons * 100 pcs = 87000 pcs40HQ: 2021 cartons * 100 pcs = 202100 pcs

Read more less

1. Bluetooth version 5.02. The amplification chip uses TPA31163. Support calls (press and hold the pause button to answer the call when a call comes)4. Supports recording. Recording only supports operation in TF mode or USB mode (long press the MODE button to start recording, long press the MODE button again to cancel recording and play the recording file; to exit the recording mode, long press the pause button to exit, you need to connect a Storage device, such as: U disk or TF card;)5. Support power-off memory, the module board is powered by 12V battery (not included)6. The power supply voltage supports DC 8v-24v, and the current is between 1-4A7. Can be directly connected to speakers, with power amplifier and decoding functions8. Support song formats MP3/WAV/APE/FLAC9. Main functions MP3/USB/TF/LINE IN/FM/BLUETOOTH/remote control10. The total power is 100W, 2 channels each have 50W11. Supports folder selection and playback. Press FD+ for the next folder and FD- for the previous folder.12. The black silicone remote control uses AA batteries (not included), the small silicone remote control and small remote control use button batteries (not included)13. Length, width and height: 105mmx61mmx40mm14. Weight: 98GSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 15cm * 10cm * 7cm / 5.91inch * 3.94inch * 2.76inch Qty per Carton 36 Carton Weight 6.86kgs / 15.12lb Carton Size 47cm * 32cm * 30cm / 18.5inch * 12.6inch * 11.81inch Loading Container 20GP: 591 cartons * 36 pcs = 21276 pcs40HQ: 1372 cartons * 36 pcs = 49392 pcs

Read more less

1. Sensor: IMX7082. Pixel: 11.9MP (4608 x 2592)3. Focusing method: I2C controller, supports auto focus4. CMOS size: 7.4mm5. Aperture: F2.26. Focal length: 3.08mm7. Diagonal field of view (FOV): 120°8. Supported devices: compatible with all Raspberry Pi motherboard modelsPackaging list:- IMX708-120 Camera (B) x 1- 15PIN FFC 1.0 with 160mm (opposite direction) pitch x 1- RPi Zero V1.3 Camera Cable 15cm x 1Specification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 6cm * 6cm * 4cm / 2.36inch * 2.36inch * 1.57inch Qty per Carton 360 Carton Weight 5.00kgs / 11.02lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 360 pcs = 157680 pcs40HQ: 1018 cartons * 360 pcs = 366480 pcs

Read more less

1. Material: ABS2. Rated current: 30Amp3. It has waterproof rubber ring and has waterproof function, suitable for operation on board or in rainy days.4. With anti-corrosion function, overload and overheat protection function5. Easy to install, no need to purchase additional accessories such as fuses, relays, switches, etc.6. 12VDC 6-position key switch panel set with LED blue light7. Neat wiring, waterproof function, safe and reliable8. Size: 152x108x38mm9. Weight: 0.58kgSpecification: Package Weight One Package Weight 0.64kgs / 1.41lb One Package Size 17cm * 14cm * 5cm / 6.69inch * 5.51inch * 1.97inch Qty per Carton 24 Carton Weight 15.50kgs / 34.17lb Carton Size 36cm * 30cm * 32cm / 14.17inch * 11.81inch * 12.6inch Loading Container 20GP: 771 cartons * 24 pcs = 18504 pcs40HQ: 1791 cartons * 24 pcs = 42984 pcs

Read more less

1. For IPROG+/IPROG+ Plus V7772. With reading and writing functions3. With protective shell design, not easy to damage4. Can adapt to your model well and help you solve problems5. Through exquisite craftsmanship and professional processing, the performance of the electronic chip is very good, and the file will not be easily damaged or lost6. Easy to operate, simply replace the original chip and the device programming chip has good adaptability7. Size: 5x5x5cm8. Weight: 0.45kgSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 7cm * 7cm * 7cm / 2.76inch * 2.76inch * 2.76inch Qty per Carton 140 Carton Weight 8.80kgs / 19.40lb Carton Size 51cm * 37cm * 30cm / 20.08inch * 14.57inch * 11.81inch Loading Container 20GP: 471 cartons * 140 pcs = 65940 pcs40HQ: 1093 cartons * 140 pcs = 153020 pcs

Read more less

1. Using SAW devices to stabilize the frequency, 6.5G ultra-high frequency triode, to meet all aspects and levels of application2. Scope of application: car, motorcycle anti-theft device, family anti-theft alarm, various remote control, electric curtain, rolling door, parking lot barrier control, etc.3. Working voltage: 12V4. Working current: 10mA5. Transmission distance: 200 meters6. Modulation method: ASK7. Size: 92x41x12mm8. Battery specification: 23A 12V battery (not included)Specification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 11cm * 6cm * 3cm / 4.33inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 9.50kgs / 20.94lb Carton Size 44cm * 30cm * 30cm / 17.32inch * 11.81inch * 11.81inch Loading Container 20GP: 673 cartons * 200 pcs = 134600 pcs40HQ: 1563 cartons * 200 pcs = 312600 pcs

Read more less

1. Operating voltage: 3.3V/5V2. Resolution: 360 x 360 pixels3. Brightness: 450 cd/square meters4. Contrast ratio: 1200:15. Display driver IC: ST779166. Touch controller IC: CST816S7. Display interface: QSPI8. Touch interface: I2C9. Display panel: IPS10. Touch type: Capacitive11. Display colors: 262K12. Display size: Approx. 45.68 x 45.68 mm13. Dimensions: Approx. 55 x 55 x 9.1 mmFeatures:1. 360 x 360 resolution, 262K colors; capable of clearly displaying color images.2. High-transmittance touchscreen with fast response and long service life.3. Built-in ST77916 display driver and CST816S capacitive touch controller; communicates via QSPI and I2C interfaces respectively, minimizing pin usage; compatible with main control boards such as ESP32-S3, Raspberry Pi Pico, and STM32.4. Includes example code and resources for ESP32, Pico, STM32, and more.5. Onboard level-shifting chip; compatible with 3.3V/5V power inputs.Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 100 Carton Weight 6.00kgs / 13.23lb Carton Size 40cm * 32cm * 30cm / 15.75inch * 12.6inch * 11.81inch Loading Container 20GP: 694 cartons * 100 pcs = 69400 pcs40HQ: 1612 cartons * 100 pcs = 161200 pcs

Read more less

1. The input is a switch signal. When the input port is short-circuited to the ground (GND), an alarm message will be sent to the preset alarm phone, or call the set alarm number. The content of the alarm message can be set by yourself 2. It is simple and convenient to use, can be well embedded in other equipment, and act as a remote alarm working system 3. The alarm content of 1 alarm input and the alarm content when it is restored to normal can be defined by yourself 4. Built-in rechargeable lithium battery, usually in a charging state, when the main power is off, it will provide power and send an alarm message to the preset number 5. Power supply: DC 5V-15VSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 13cm * 10cm * 3.1cm / 5.12inch * 3.94inch * 1.22inch Qty per Carton 60 Carton Weight 8.43kgs / 18.58lb Carton Size 41cm * 34cm * 22cm / 16.14inch * 13.39inch * 8.66inch Loading Container 20GP: 869 cartons * 60 pcs = 52140 pcs40HQ: 2018 cartons * 60 pcs = 121080 pcs

Read more less

FeaturesThe Solar Power Manager (B) is compatible with general 6V~24V solar panels. It can recharge the 3.7V rechargeable Li-po battery through solar panel or USB TYPE-C connection, and provides 5V / 3A regulated output (with multi protocols support including PD/QC/FCP/PE/SFCP). The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep operating with high-efficiency, stability, and safety. It is suitable for solar powered, low-power IoT, and other environmental protection projects. 1. Support MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel 2. Flexible battery recharging: from solar panel or USB TYPE-C power adapter 3. Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input 4. Onboard MPPT SET switch, select the level closed to input level to improve recharging efficiency 5. Onboard aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance 6. PH2.0 battery connector, with embedded 10000mAh 3.7V rechargeable Li-po battery 7. Several LED indicators, for monitoring the status of solar panel and battery 8. Multi protection circuits: over charge / over discharge / reverse-proof / over heat / over current, stable and safe to useSpecification: Package Weight One Package Weight 0.35kgs / 0.77lb One Package Size 20cm * 15cm * 5cm / 7.87inch * 5.91inch * 1.97inch Qty per Carton 40 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 32cm * 27cm / 16.54inch * 12.6inch * 10.63inch Loading Container 20GP: 734 cartons * 40 pcs = 29360 pcs40HQ: 1705 cartons * 40 pcs = 68200 pcs

Read more less