Search results for "digital multimeter adapter"

Connect To 12V Car BatteryWhen connected to a 12V car battery, different voltages will display different signals: Switch to 12V 1. 0V-4.5V: The product cannot start, please replace the battery. 2. 4.5V-11.3V: The OK light flashes, and the other lights are off. The higher the voltage, the more frequent the flashing. When it reaches 11.3V, the OK light is always on. 3.11.3V-12V: The low light flashes, and the OK light is on. The higher the voltage, the more frequent the flashing. When it reaches 12V, the low light is on, and the other lights are off. 4. 12V-12.5V: The middle light flashes, and the low light is on. The higher the voltage, the more frequent the flashing. When it reaches 12.5V, the middle light is on, and the other lights are off. 5. 12.5-13.4V: Full beam flashes, center beam is on. The higher the voltage, the faster the flashing frequency. Upon reaching 13.4V, the full beam is on and the other lights are off. 6. 13.4V-14.4V: Good beam flashes, full beam is on. The higher the voltage, the faster the V. Upon reaching 14.4V, the good beam is on and the other lights are off. 7. 14.4V-15.5V: Fault lights are flashing, good beam is on. The higher the voltage, the faster the flashing frequency. Upon reaching 15.5V, the fault lights are on and the other lights are off.Connect To 24V Car BatteryConnecting to the 24V car battery, different voltage will show different signals: Switch to 24V 1. 0V-4.5V: product can not start, please replace the battery 2. 4.5V-20V: OK light flashes, other lights do not shine. The higher the voltage, thefaster the flicker frequency. When reaching 20V, OK light is always on. 3. 21V-23V: LOW light flashes, OK light is on. The higher the voltage, the fasterthe flicker frequency. When reaching 23V, the LOW light is on and the other lightsare off. 4. 23V-24.5V: MIDDLE light flashes, LoW light is on. The higher the voltage, thefaster the flicker frequency. When reaching 24.5V, MIDDLE light is on, the other lightsdo not shine. 5. 24.5V-26V: FULL light flashes, MiDDLE light is on. The higher the voltage, thefaster the flicker frequency. When reaching 26V, the FULL light is on and the otherlights are off. 6. 26V-27.5V: GOOD light flashes, FuLL light is on. The higher the voltage, the fasterthev. When reaching 27.5V, the GOOD lamp is on and the other lights are off. 7. Greater than 28V: FAULT lights flashing, GOOD lights are on. The higher the voltage, thefaster the flicker frequency. When reaching 28V, the FAULT lights are on and the otherlights are off. The utility electrical equipment in car , driving habits and other factors will affect the car battery life.Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 6cm * 5cm / 5.91inch * 2.36inch * 1.97inch Qty per Carton 200 Carton Weight 7.50kgs / 16.53lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 200 pcs = 100000 pcs40HQ: 1162 cartons * 200 pcs = 232400 pcs

Read more less

1. Material: plastic 2. Plug and play, easy to use 3. Durable and not easy to break 4. Suitable for Carter ET3 5. Voltage: 9-36V 6. Working temperature: -20 degrees Celsius - +80 degrees CelsiusSpecification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 24cm * 4cm * 4cm / 9.45inch * 1.57inch * 1.57inch Qty per Carton 100 Carton Weight 21.00kgs / 46.30lb Carton Size 26cm * 30cm * 30cm / 10.24inch * 11.81inch * 11.81inch Loading Container 20GP: 1139 cartons * 100 pcs = 113900 pcs40HQ: 2645 cartons * 100 pcs = 264500 pcs

Read more less

1. Measurement range: 0Lux ~200,000Lux/oFc~185,806Fc. 2. Digital update: 2 seconds at a time. 3. Photometric probe: silicon diode. 4. The operating temperature and humidity: 0 Celsius~40 Celsius. 5. Save the temperature and humidity: -20 Celsius~50 Celsius. 6. Power: 9V battery (not included). 7. Size: 52.5mm x 35.5mm x 166mm. 8. Backlight function. 9. Low voltage battery symbol instructions. 10. Application: Factories, schools, office, transportation route, house and so on, used to measure light intensity of various occasions.Specification: Package Weight One Package Weight 0.18kgs / 0.39lb One Package Size 19.1cm * 13.3cm * 5cm / 7.52inch * 5.24inch * 1.97inch Qty per Carton 40 Carton Weight 8.32kgs / 18.34lb Carton Size 48cm * 35cm * 35cm / 18.9inch * 13.78inch * 13.78inch Loading Container 20GP: 453 cartons * 40 pcs = 18120 pcs40HQ: 1052 cartons * 40 pcs = 42080 pcs

Read more less

1) RP-SMA to RP-SMA Adapter 2) Size: 2cm x 1cm x 1cm 3) Weight: 5gSpecification: Package Weight One Package Weight 0.01kgs / 0.02lb Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 20cm * 10cm * 10cm / 7.87inch * 3.94inch * 3.94inch Loading Container 20GP: 13333 cartons * 1000 pcs = 13333000 pcs40HQ: 30952 cartons * 1000 pcs = 30952000 pcs

Read more less

1. Input port: USB3.1 Type-C 2. The USB-C interface is about 8.25*2.4mm 3. The USB-C interface contains a 24pin terminal, which supports forward and reverse plugging and unplugging 4. Data transfer rate up to USB3.1 10Gbps 5. Output port: external high-definition VGA equipment, such as monitors, projectors, TVs, etc. 6. Cable length: 1.8m 7. Net weight: 78gSpecification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 16cm * 13cm * 2cm / 6.3inch * 5.12inch * 0.79inch Qty per Carton 120 Carton Weight 10.50kgs / 23.15lb Carton Size 41cm * 34cm * 24cm / 16.14inch * 13.39inch * 9.45inch Loading Container 20GP: 797 cartons * 120 pcs = 95640 pcs40HQ: 1850 cartons * 120 pcs = 222000 pcs

Read more less

1. This product is an industrial-grade 8-channel relay module controlled by RS485 interface, featuring 8-channel switch input, adopting Modbus RTU protocol, and equipped with built-in power isolation, magnetic coupling isolation, and TVS protection circuits. It is designed with an ABS housing. This product is easy to operate and features fast communication speed, stability, reliability, and safety. It is suitable for various industrial control devices or applications with high communication requirements.2. It supports setting the device address (1 to 255) to cascade multiple devices through the RS485 bus.3. It has flashing on and off functions, allowing parameters to be set in the instructions to operate the relay to turn on for a certain period and then automatically turn off.4. It has an integrated power isolation circuit on the board, providing stable isolated voltage, and the isolation end does not require additional power supply.5. It has an integrated magnetic coupling isolation circuit on the board, capable of signal isolation, with high reliability, strong anti-interference, and low power consumption.6. It has a self-resetting fuse and TVS (transient voltage suppressor) on the board, effectively suppressing surge voltage and transient peak voltage in the circuit, preventing overcurrent and overvoltage, and protecting against lightning and static electricity.7. It has an integrated optocoupler isolation circuit on the board to prevent interference from the relays high-voltage circuit.8. It uses a dedicated relay driver chip with built-in freewheeling diode protection, providing stronger and more stable driving capability.9. The switch input has bidirectional optocoupler isolation, supporting both passive and active switch input, with an internal anti-bounce algorithm. The relay supports switch input linkage mode or flip mode control.10. It has an anti-reverse connection circuit on the board to prevent damage to the circuit from reversed positive and negative connections.11. It uses high-quality relays, allowing a load of up to 10A 250V AC or 10A 30V DC.12. It has a rail-mounted ABS protective housing, making installation and use convenient, and is safer with the housing.13. It has an external LED indicator light for easily checking the MCU status and signal transmission and reception status. Parameters:1. Power Supply Voltage: 7 - 36V2. Communication Interface: RS4853. Communication Baud Rate: 4800, 9600, 19200, 38400, 57600, 115200, 128000, 2560004. Default Communication Format: 9600, N, 8, 15. Relay Channels: 8 channels6. Contact Type: One normally open, one normally closed7. Contact Load: Less than or equal to 10A 250V AC or less than or equal to 10A 30V DC8. Digital Input: 8DI, 5 - 36V, passive input/active input (NPN type or PNP type), built-in bidirectional optocoupler9. Modbus Protocol: Standard Modbus RTU protocol10. RS485 Address Setting: 1 - 25511. Indicator Lights:--STA: MCU indicator light, flashes when MCU is working normally--TXD: Transmission indicator light, lights up when data is being sent--RXD: Reception indicator light, lights up when data is being receivedSpecification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 20cm * 12cm * 6cm / 7.87inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 5.60kgs / 12.35lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 30 pcs = 15660 pcs40HQ: 1212 cartons * 30 pcs = 36360 pcs

Read more less

1. Purpose: Measure tilt angle2. Resolution: 0.1 degree3. Measuring range: 4x90 degrees4. Power supply: 1 AAA battery (not included)5. Size: About 5.7x3 cm6. Weight: About 70 gramsFeatures:1. 4 kinds of units can be switched, angle, slope, in/ft, mm/m2. Powerful adsorption magnet design, 360-degree comprehensive measurement, inclination/level test function3. The screen automatically flips. When the instrument is placed upside down, the display screen will automatically flip and display, 360 measurement, convenient for viewing data Strong backlight4. Convenient to view data, automatic shutdown after 1 minute of non-use, energy saving and power saving5. It can be locked at any angle, and the HOLD key can hold measurement data at any angleSpecification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 10cm * 10cm * 3.5cm / 3.94inch * 3.94inch * 1.38inch Qty per Carton 200 Carton Weight 21.00kgs / 46.30lb Carton Size 52cm * 42cm * 37cm / 20.47inch * 16.54inch * 14.57inch Loading Container 20GP: 330 cartons * 200 pcs = 66000 pcs40HQ: 766 cartons * 200 pcs = 153200 pcs

Read more less

1. Plug and play, no driver required 2. Working voltage: 4.5V-5.5V 3. The USB port can connect peripheral devices such as U-disk, keyboard, mouse, gamepad, etc. 4. Suitable for mobile phones and tablets with Type-C interface 5. Small size, easy to carrySpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 16cm * 6.5cm * 2cm / 6.3inch * 2.56inch * 0.79inch Qty per Carton 200 Carton Weight 5.80kgs / 12.79lb Carton Size 32cm * 35cm * 34cm / 12.6inch * 13.78inch * 13.39inch Loading Container 20GP: 700 cartons * 200 pcs = 140000 pcs40HQ: 1625 cartons * 200 pcs = 325000 pcs

Read more less

This board can be used with Arduino /Raspberry Pi boardModule itself can adapt 3.3V and 5V systems without level conversion.Features1. Within -40 degree C to +85 degree C temperature range, timing accuracy is maintained at +/- 5ppm (+/- 0.432 sec / day).2. Provide battery backup for continuous timing.3. Low-power.4. Device package and function compatible with the DS3231.5. Complete clock functions include seconds, minutes, hours, day, date, month and year timing, and provide valid to 2100.6. Two calendar alarm.7. 1Hz and 32.768kHz output.8. Reset button and button input.9. High-speed (400kHz) I2C serial bus.10. +2.3 V to +5.5 V supply voltage.11. +/-3 degree C accuracy digital temperature sensor.12. -40 degree C to +85 degree C operating temperature range.13. 16-pin SO (300mil) packageSpecification1. Brand: Landa tianrui2. Model: LDTR-WG02113. Quantity: 1 piece4. Color: Black5. Material: PCB6. Chipset: DS32317. Dimensions: 2.2 cm x 1.2 cm x 0.5 cm8. Weight: 5g9. Package List: 1 x DS3231 Clock ModuleSpecification: Package Weight One Package Weight 0.02kgs / 0.03lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs40HQ: 661 cartons * 6240 pcs = 4124640 pcs

Read more less

1. The portable instrument is automatically powered off after conversion and greatly reduces current consumption during idle periods2. Features: easy to implement, high precision, low current consumption, multi-mode conversion3. Power supply voltage: 2-5.5v4. Working temperature: -40 to 125 degrees celsius5. Programmable data rate: Transmission via I2C compatible serial interface6. Single mode: Automatic shutdown with onboard reference and oscillator7. Size: about 16 x 28mm8. Weight: about 2.5gSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 6cm * 2cm / 2.36inch * 2.36inch * 0.79inch Qty per Carton 500 Carton Weight 13.00kgs / 28.66lb Carton Size 47cm * 47cm * 15cm / 18.5inch * 18.5inch * 5.91inch Loading Container 20GP: 804 cartons * 500 pcs = 402000 pcs40HQ: 1868 cartons * 500 pcs = 934000 pcs

Read more less

1. Material: Aluminum Shell, ABS Shell 2. Spring force is uniform and stable, fine grinding closure is good. 3. Pressure handle, circular measurement, with metric-British conversion function 4. LCD screen display, easy to use 5. Suitable for measuring all kinds of planar soft materials, such as leather, paper, film, sponge, wire, etc. 6. Size: 120*100mmSpecification: Package Weight One Package Weight 0.39kgs / 0.86lb One Package Size 30cm * 20cm * 12cm / 11.81inch * 7.87inch * 4.72inch Qty per Carton 10 Carton Weight 6.35kgs / 14.00lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 10 pcs = 2770 pcs40HQ: 644 cartons * 10 pcs = 6440 pcs

Read more less

1. DP / Mini DP / UCB-C Male to HDMI Female 2. Support 4K HD 3. Widely used in: notebooks, mobile phones, tablets, players, video cards, game consoles, etc. with DP, Mini DP, USB-C interface, connected by this conversion line and converted into HDMI (4K*2K) output. Thereby, solving the user DP, Mini DP, HDMI three digital signal input to HDMI (4K*2K) display device connection scheme. 4. Size: 6.2 x 6 x 1cm 5. Net weight: 42gSpecification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15.2cm * 9cm * 3cm / 5.98inch * 3.54inch * 1.18inch Qty per Carton 150 Carton Weight 10.30kgs / 22.71lb Carton Size 41cm * 47cm * 32cm / 16.14inch * 18.5inch * 12.6inch Loading Container 20GP: 432 cartons * 150 pcs = 64800 pcs40HQ: 1003 cartons * 150 pcs = 150450 pcs

Read more less