Search results for "network patch panels"

The Wireless-N Repeater is mainly used for providing free WIFI service in big area such as factory, community, street or etc. It complies with the IEEE 802.11n standard with wireless transmission speeds of up to300Mbps. It has 2dBi ceramic chip Antennas providing even better wireless performance, transmission rates, stability technology automatically avoids channel conflicts using its channel selection feature. It also works well with other 802.11g and 802.11n protocol wireless products. 1. Improve wireless coverage in all WLAN networks. 2.Access to the Internet for computers located on the edge or outside of the range of your access point. 3. Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards 4. Provides up to 300Mbps transmission rates. 5. Support 2.4 GHz WLAN networks. 6. Maximum WLAN security with WPA2, WPA and WEP (128/64). 7. Software wizard for simple setup. 8. 2dBi antennas integrated. 9. Support Wireless Repeater Mode and Standard AP Mode 10. Provide one 10/100Mbps Auto-Negotiation Ethernet LAN ports 11. Size: 96 x 80 x 52mmSpecification: Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 20cm * 12cm * 8cm / 7.87inch * 4.72inch * 3.15inch Qty per Carton 20 Carton Weight 2.36kgs / 5.20lb Carton Size 46cm * 35cm * 25cm / 18.11inch * 13.78inch * 9.84inch Loading Container 20GP: 662 cartons * 20 pcs = 13240 pcs40HQ: 1538 cartons * 20 pcs = 30760 pcs

Read more less

1. Support bandwidth up to 600MHz so you can connect to your LAN/WAN segments and networking gear at maximum speeds 2. Transmitting data at speeds of up to 10Gbps over 100m run of cable 3. Made of 4 shielded twisted pair (STP) of copper wires with two RJ45 connectors on each end. Compared to the Cat 6 network Ethernet cable, the additional shielding and improved quality in twisting of the wires provides better protection from crosstalk, noise, and interference that can degrade the signal quality 4. The clip protector keeps the RJ45 connector from unwanted snags while routing the cable 5. Surf the net, stream video, music, and other data at greater speed without worrying about cable mess Specification: General Cable Length 15m Weight 375g Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 22cm * 22cm * 2cm / 8.66inch * 8.66inch * 0.79inch Qty per Carton 40 Carton Weight 16.50kgs / 36.38lb Carton Size 46cm * 46cm * 22cm / 18.11inch * 18.11inch * 8.66inch Loading Container 20GP: 572 cartons * 40 pcs = 22880 pcs40HQ: 1329 cartons * 40 pcs = 53160 pcs

Read more less

FeaturesThis is a RS485 device data acquisitor / IoT gateway designed for industrial environment. It combines multi functions in one, including serial server, Modbus gateway, MQTT gateway, RS485 to HTTPD Client, etc. With RS485, WIFI and Ethernet ports, the module can realize functions such as serial to WIFI, serial to Ethernet, Ethernet to WIFI and so on. Using screw terminals for power input, it supports 5~36V wide range power supply. Rail-mount V0 flame-retardant case design, small in size, easy to install. It is suitable for applications like data acquisition, IoT gateway, safety & security IoT, and intelligent instrument monitoring...SpecificationsOutline: 1. Communication interface: RS485, screw terminal 2. Power supply: 5 ~ 36V DC, screw terminal 3. Case: PC + ABS, V0 flame retardant grade 4. Dimensions: L x W x H: 109.66 x 28 x 64.71 mm Comunication: 1. Ethernet: 10 / 100M auto-negotiation RJ45 connector 2. WIFI: 802.11b/g/n compliant 3. Serial port: RS485 interface (Anti-surge, Lightningproof, Over-current protection) Wireless specification: 1. Frequency Band: 2.412 ~ 2.484 GHz 2. Wireless network: Station / AP / AP+Station Mode 3. Security mechanism: WPA-PSK / WPA2-PSK 4. Encryption type: TKIP / AES 5. Transmitting power: - 802.11b: +19dBm (11Mbps) - 802.11g: +18dBm (54Mbps) - 802.11n: +17dBm (HT20, MCS7); +17dBm (HT40, MCS7) 6. Receiving sensitivity: - 802.11b: -89dBm (11Mbps) - 802.11g: -81dBm (54Mbps) - 802.11n: -73dBm (HT20, MCS7); -71dBm (HT40, MCS7) Serial specification: 1. Baudrate: 300 ~ 460800 bps 2. Parity bit: None, odd, even, mark, space 3. Data bit: 5 ~ 9 bits 4. Flow control: N/A Software 1.Protocol: TCP / UDP / ARP / ICMP / DHCP / DNS / HTTP / MQTT 2. Configuration: Host, web browser, serial AT command 3. Communication method: TCP/IP direct communication, VCOM 4. Operating mode: Transparent transmission, serial command, HTTPD Client, Modbus TCP to Modbus RTU Environmental requirements 1. Working temperature: -40 ~ 85 degree C 2. Storage temperature: -45 ~ 125 degree C 3. Humidity range: 5% ~ 95% relative humidityPackage List1. RS485 TO WIFI/ETH x 1 2. Antenna x 1Specification: Package Weight One Package Weight 0.17kgs / 0.37lb One Package Size 15cm * 8cm * 5cm / 5.91inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 17.00kgs / 37.48lb Carton Size 42cm * 50cm * 32cm / 16.54inch * 19.69inch * 12.6inch Loading Container 20GP: 396 cartons * 100 pcs = 39600 pcs40HQ: 921 cartons * 100 pcs = 92100 pcs

Read more less

Features1. Onboard switch chip, 5x ports 10/100/1000M non-blocking switch architecture 2. Full-duplex 10/100/1000M support for each port (the half-duplex 100M connection is only supported on 10/100M mode) 3. Full/Half-duplex operations with IEEE 802.3x flow control and back pressure support 4. Allow forwarding 9216 bytes huge data packet on linear speed 5. Over-voltage protection, effectively preventing damages caused by other high voltage power supply 6. Industrial grade alloy case, solid and durable, with DIN rail mount support for easy installing 7. 5~36V wide voltage power supply, dual power interface (DC interface and terminal block) onboard overvoltage protection, reverse connection protection. 8. Support 25mm standard rail.Package List1. Gigabit-Switch-5P x 1 2. Power supply screw terminal x 1 3. 12V 1A power adapter x 1Specification: Package Weight One Package Weight 0.24kgs / 0.52lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 80 Carton Weight 18.50kgs / 40.79lb Carton Size 50cm * 52cm * 32cm / 19.69inch * 20.47inch * 12.6inch Loading Container 20GP: 320 cartons * 80 pcs = 25600 pcs40HQ: 744 cartons * 80 pcs = 59520 pcs

Read more less

About The Product1. PSE series PoE switches not only in price can be mount and desk-top installation comparable to ordinary switch, and, compared to those only work in 0 degree C ~50 degree C environment, plastic shell household switches, they specifially for the network system needs uninterrupted work, such as the IPC security system. 2. All models feature stable performance,come with dual surge protection circuits, so that the MTBF of these switches reaches 150K hours. Usually, these functions are ordinary business switches on the market do not have . 3. The aluminum housing of PSE series switches designed to be very compact, so you can easily put them in a small power supply box. Therefore, they are ideally suited for small projects or home security systems.Features1. Metal aluminium housing supports wall mount and desk-top installation. 2. Unique thermal design, wide operating temperature range -30 degree C ~ 70 degree C. 3. MTBF up to 150K hours, designed for 24-hours-working surveillance system. 4. Maxium PoE output up to 20W/port. 5. Plug and play installation, non-professional can quickly install it.Standards Conformance- IEEE 802.3af & IEEE 802.3at Power over Ethernet - IEEE 802.3 10Base-T - IEEE 802.3u 100Base-TX - IEEE 802.3x Flow Control and Back pressure - IEEE 802.1d Spanning Tree Protocol - IEEE 802.1Q VLAN Tagging - IEEE 802.1x Port Authentication Network Control - FCC Part 15 Class A, CEPower Support1. Power over Ethernet: - PoE Standard: IEEE 802.3af & IEEE 802.3at. - PoE Power Supply Type: End-span & Mid-span. - PoE Output Power: Port 1~8: 48VDC, max. 20W/port. - Power Pins Assignment: 1/2, ,3/6,or 4/5(+),7/8(-). - PoE Ouput Power Budget: 120W in total, depending on connected power supply. - PoE Ports Assignment: Port 1~8: IEEE 802.3af (15.4W/port) or IEEE 802.3at (20W/port) PoE output. - PoE/Data Extends Range: Port 10: up-link,150-meter data transmission 150 meters/490ft. 2. Electrical: - Input Voltage: DC 48V. - AC-DC Power Adapter: Optional 120W, UL-listed,90~264VAC to 48VDC, 50/60Hz, Auto-sensing. - Power Consumption (System on): 2W. - Power Consumption (Full load): 120W. - MTBF: More than 150K hours. - Surge Protection : PPTC active surge current limiting, Transient Voltage Suppressor (TVS).Specification: General Model POE 8+2 Material Metal Input Voltage DC 48V Interface 10/100M Fast Ethernet Operation Range 150m Size 192 x 78 x 29 mm Weight 480g Environment Operating Temperature -30 - 70 Degrees Celsius Storage Temperature -40 - 85 Degrees Celsius Operating Humidity 95% RH, noncondensing Storage Humidity 95% RH, noncondensing Package Include Package Contents 1 x User Manual 1 x Power Supply 1 x Switch 1 x Power Supply (EU, US, AU, UK Optional) 1 x Mounting Screws Set Package Weight One Package Weight 1.26kgs / 2.78lb One Package Size 25.5cm * 18cm * 8.5cm / 10.04inch * 7.09inch * 3.35inch Qty per Carton 10 Carton Weight 13.50kgs / 29.76lb Carton Size 45cm * 38cm * 27cm / 17.72inch * 14.96inch * 10.63inch Loading Container 20GP: 577 cartons * 10 pcs = 5770 pcs40HQ: 1340 cartons * 10 pcs = 13400 pcs

Read more less

About The Product1. VAP11G-300 is a professional 300M WiFi repeater that is elaborately developed by HouTian Network, the original creation D/A temperature compensated auto frequency control technology (TAFC), it solved the common failing of the traditional wifi signal or wifi products that easily drop the network, make sure the lasting stability to ensure that the WiFi signal is not dropped. It is based on IEEE 802.11N standard, can extend WiFi Network range, provides the stable transmission up to 300Mbps, also is compatible with IEEE 802.11B and IEEE 802.11G standard. 2. VAP11G-300 is an environmentally and safe WiFi signal repeater. Working in the repeater mode, VAP11G-300 can be doubled to extend the original WiFi signal coverage, while it can ensure the security of the wireless signal, its working principle is: at the edges of the original WiFi hot spot signal coverage, the VAP11G-300 that in "repeater mode" is able to receive weak WiFi signal, and then zoom in to the normal, safe strength, and after optimization, error correction processing, to achieve signal coverage distance doubled extension under safe. This differs from traditional wireless signal amplifier - only amplifies the signal and ignore the wireless security. 3. In the software operation, Houtian network uphold the consistent simple, user-friendly design, abandoned the verbose of IP setup for traditional wireless repeater, using the virtual domain configuration techniques(VDNS)configuration, and also support the use of IE browser configuration and PC-specific software configuration (no IP connection), on the steps, it is even more concise, no redundant operations, which greatly facilitates the use of different levels of user.Features1. Environmental, safe, portable, mini. 2. Support 802.11b/g/n WiFi transmission protocol, 300Mbps rate of transmission. 3. Professional intelligent WiFi repeater. 4. WiFi intelligent bridge function, Wireless switch wired, wired switch wireless, intelligent switch. 5. WiFi intelligent repeater mode, it supports WiFi hot spots scan automatically and WiFi hot spot memory function. 6. Support turn off the wifi hotspot function 7. Support WEB remote firmware upgrade, can get the latest firmware free. 8. Support local WEB management, Chinese and English configuration interface. 9. It can be USB powered, easy to use mobile power supply. 10. Adopt the original creation D/A temperature compensated auto frequency control technology(TAFC),make sure the lasting stability to ensure that the WiFi signal is not dropped. 11. Original creation VDNS virtual domain configuration technology to solve the user's trouble of configuration. 12. Support connecting more than 20pcs WiFi terminal at the same time. 13. Support WPA-PSK/WPA2-PSK, 64/128/WEP security mechanism. 14. The transmission distance (without obstacle): 100m. 15. Input voltage: DC 5V-15V, Needn't extra power supply, reducing e-wasteSpecification: General Model VAP11G-300 Interface USB 2.0, RJ45, DC IN Transmission Rate 300Mbps for WiFi Wireless Security WPA2-PSK WPA-PSK 64/128 Bit WEP WPA2 WPA Antenna Types Built-in 2pcs Smart omnidirectional 2dbm Antennas Standards WiFi IEEE 802.11n WiFi IEEE 802.11g WiFi IEEE 802.11b Size 90*45*15mm Weight 90g Package Include Package Contents 1 x USB Cable 1 x Repeater Package Weight One Package Weight 0.11kgs / 0.23lb One Package Size 15cm * 10cm * 3cm / 5.91inch * 3.94inch * 1.18inch Qty per Carton 50 Carton Weight 6.50kgs / 14.33lb Carton Size 52cm * 29cm * 21cm / 20.47inch * 11.42inch * 8.27inch Loading Container 20GP: 842 cartons * 50 pcs = 42100 pcs40HQ: 1954 cartons * 50 pcs = 97700 pcs

Read more less

1. 8 gigabit auto-negotiation RJ45 ports greatly expand network capacity. 2. Energy efficient technology which saves up to 60% lower in power consumption 3. High integration design, small and exquisite, portable, suit for medium and small office and home network 4. Plug and play, no configuration needed 5. Using store and forward technology, combined with dynamic memory allocation, ensure allocate to each port effectively 6. Its wire speed switching that forward packets can be as fast as the speed tha your network delivers those packets to them.Specification: General Material ABS Product Size 15.8*7*2.8cm Weight 132g Package Included Package Contents 1 x Host 1 x Power Supply Package Weight One Package Weight 0.25kgs / 0.54lb One Package Size 16.5cm * 8cm * 6.5cm / 6.5inch * 3.15inch * 2.56inch Qty per Carton 40 Carton Weight 10.20kgs / 22.49lb Carton Size 43cm * 35cm * 28cm / 16.93inch * 13.78inch * 11.02inch Loading Container 20GP: 632 cartons * 40 pcs = 25280 pcs40HQ: 1469 cartons * 40 pcs = 58760 pcs

Read more less

Feature1. It is a 1200Mbps dual-band WiFi signal amplifier with two high-gain antennas for signal enhancement. 2. Built-in 4xpower amplifier chips, with the use of routers to eliminate home WiFi signal blind spots, to solve the problem of large multi-bedroom area, the house is too large routing coverage, effectively expand the WiFi coverage, achieve real WiFi coverage of the whole house. 3. No need to connect a power adapter, it can be used with a socket, and has a powerful memory function. After the setting is completed, the shell can be plugged and used. 4. Adopt 802.11AC dual-frequency in time, and send out two independent frequency bands at the same time, and the signals do not interfere with each other. 5. Multiple modes, flexible settings: - Repeater mode (wireless to wireless): expand the WiFi signal of the main router, and clear the dead spots of WiFi. - AP/routing mode (wired to wireless): Connect the network cable to the amplifier to transmit WiFi signals. - Do not worry about not having a network cable (wireless to wired): It has a built-in network port, which can receive wireless to wired, for desktop computers/laptops to connect to the Internet.Specifications1. RF parameters: - Transmitting power: 400mW max - Receive sensitivity: -98dBm max 2. Wireless standard: IEEE802.11a/b/g/n/ac 3. Transmission rate: 2.4GHz: 300Mbps, 5.8GHz: 867Mbps 4. Chip: MT7628DA+MT7613B 5. Memory: 64M, flash memory: 8M 6. Button: 1 RESET button 7. Indicator light: power light, network port light, signal light 8. Antenna gain: 2x5dBi dual-band antenna 9. Power parameters: 100-240V AC 10. Power consumption: 16W max 11. Physical interface: 1x10/100Mbps, RJ45 WAN/LAN Ethernet port 12. Working mode: AP/relay/routing mode 13. Use environment: - Working temperature: -10~55 degrees Celsius - Storage temperature: -40~70 degrees Celsius - Working humidity: 10~90%RH non-condensing - Storage humidity: 5~90%RH non-condensing 14. Size: 129x85x50mmSpecification: General Certificate CE Package Weight One Package Weight 0.55kgs / 1.22lb One Package Size 22cm * 12cm * 9cm / 8.66inch * 4.72inch * 3.54inch Qty per Carton 20 Carton Weight 12.50kgs / 27.56lb Carton Size 46cm * 38cm * 32cm / 18.11inch * 14.96inch * 12.6inch Loading Container 20GP: 476 cartons * 20 pcs = 9520 pcs40HQ: 1106 cartons * 20 pcs = 22120 pcs

Read more less

1. Support bandwidth up to 600MHz so you can connect to your LAN/WAN segments and networking gear at maximum speeds 2. Transmitting data at speeds of up to 10Gbps over 100m run of cable 3. Made of 4 shielded twisted pair (STP) of copper wires with two RJ45 connectors on each end. Compared to the Cat 6 network Ethernet cable, the additional shielding and improved quality in twisting of the wires provides better protection from crosstalk, noise, and interference that can degrade the signal quality 4. The clip protector keeps the RJ45 connector from unwanted snags while routing the cable 5. Surf the net, stream video, music, and other data at greater speed without worrying about cable messSpecification: General Cable Length 1m Weight 32g Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 10cm * 10cm * 1cm / 3.94inch * 3.94inch * 0.39inch Qty per Carton 200 Carton Weight 7.90kgs / 17.42lb Carton Size 42cm * 22cm * 22cm / 16.54inch * 8.66inch * 8.66inch Loading Container 20GP: 1311 cartons * 200 pcs = 262200 pcs40HQ: 3045 cartons * 200 pcs = 609000 pcs

Read more less

1. Support bandwidth up to 600MHz so you can connect to your LAN/WAN segments and networking gear at maximum speeds 2. Transmitting data at speeds of up to 10Gbps over 100m run of cable 3. Made of 4 shielded twisted pair (STP) of copper wires with two RJ45 connectors on each end. Compared to the Cat 6 network Ethernet cable, the additional shielding and improved quality in twisting of the wires provides better protection from crosstalk, noise, and interference that can degrade the signal quality 4. The clip protector keeps the RJ45 connector from unwanted snags while routing the cable 5. Surf the net, stream video, music, and other data at greater speed without worrying about cable mess Specification: General Cable Length 10m Weight 255g Package Weight One Package Weight 0.29kgs / 0.63lb One Package Size 20cm * 20cm * 2cm / 7.87inch * 7.87inch * 0.79inch Qty per Carton 40 Carton Weight 11.70kgs / 25.79lb Carton Size 42cm * 42cm * 22cm / 16.54inch * 16.54inch * 8.66inch Loading Container 20GP: 687 cartons * 40 pcs = 27480 pcs40HQ: 1595 cartons * 40 pcs = 63800 pcs

Read more less

1. Support bandwidth up to 600MHz so you can connect to your LAN/WAN segments and networking gear at maximum speeds 2. Transmitting data at speeds of up to 10Gbps over 100m run of cable 3. Made of 4 shielded twisted pair (STP) of copper wires with two RJ45 connectors on each end. Compared to the Cat 6 network Ethernet cable, the additional shielding and improved quality in twisting of the wires provides better protection from crosstalk, noise, and interference that can degrade the signal quality 4. The clip protector keeps the RJ45 connector from unwanted snags while routing the cable 5. Surf the net, stream video, music, and other data at greater speed without worrying about cable mess Specification: General Cable Length 5m Weight 130g Package Weight One Package Weight 0.15kgs / 0.32lb One Package Size 15cm * 15cm * 2cm / 5.91inch * 5.91inch * 0.79inch Qty per Carton 120 Carton Weight 17.10kgs / 37.70lb Carton Size 47cm * 42cm * 32cm / 18.5inch * 16.54inch * 12.6inch Loading Container 20GP: 422 cartons * 120 pcs = 50640 pcs40HQ: 980 cartons * 120 pcs = 117600 pcs

Read more less

1. No need to write Ethernet underlying code to implement TCP/IP protocol stack2. Support sleep mode and wake-up on LAN, internal integrated 32K bytes on-chip buffer for Ethernet packet processing3. Support 10/100MBPS transfer rate4. Support 8 independent ports working at the same time5. The module supports 5V or 3. 3V power supply, which is convenient for users to use in different SCM systems6. The communication method between the module and the microcontroller is SPI protocol, which supports speeds up to 80MHz7. If you use the 5500 Ethernet module, you only need some simple Socket programming to realize the Ethernet application8. Support protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE9. We provide users with the source code of the routines based on the 51 single-chip microcomputer and ISTM32 single-chip microcomputer in the "client", "server" and "UDP" three working modes, as well as a detailed manual10. Chip model: W550011. Input voltage: 3.3-5v12. Size: about 55 x 28mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 15cm * 10cm * 3cm / 5.91inch * 3.94inch * 1.18inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 100 pcs = 38100 pcs40HQ: 885 cartons * 100 pcs = 88500 pcs

Read more less