Search results for "industrial temperature sensor"

Instrument instructions:1. After the test, the power of the equipment must be turned off to avoid accidents2. Prevent the instrument from violent vibration3. After placing the instrument for a long time, the odor gas will accumulate in the instrument, which will seriously affect the test results, in this case, the instrument must be placed in a cool and ventilated place, and then used for more than 1 hour (no operation is required during the ventilation process instrument)4. The expired and defective products should be repaired in time.5. Avoid shocking the sensor with gas higher than the measurement range, otherwise it may damage the sensor, and man-made damage is not covered by the warrantyInstrument introduction:1. Digital temperature and humidity sensor2. LCD display3. Mute button: Turn on or off the alarm sound. In the silent mode, the " " symbol is not displayed and there is no alarm sound. The default is to turn on the sound4. "+" button: When setting the alarm value, increase the value.5. Power button: long press for 2 seconds to turn on or off the power, when power on, the number field counts down from 1206. Temperature unit selection button: Celsius and Fahrenheit conversion7. "-" button: When setting the alarm value, decrease the value8. Setting button: Short press this button to set the alarm value of "CO2→TVOC→HCHO" in sequence, the original factory setting value will be displayed and flashing, and the parameter will be adjusted by the "+" button and "-" button, and the value will be displayed after 10 seconds. automatic storage9. Power supply: DC5V built-in 1800mAh lithium battery10. Dimensions: 195x95x35mm11. Carton packaging weight: 270 gramsDisplay content introduction:1. Alarm sound: press the "mute button" to operate2. CO2 measurement range: 350ppm～2000ppm3. TVOC measuring range: 0.000 mg/m3～2.000 mg/m34. HCHO measuring range: 0.000 mg/m3～1.000 mg/m35. Temperature display: press the "temperature unit selection button" to operate6. Measuring range: 0-90.0 degrees Celsius, 32-194 degrees Fahrenheit7. Environmental quality reminder: excellent, the detection value is lower than the set value; good, the CO2 detection value is 50ppm higher than the set value8. The TVOC detection value is 0.01 mg/m3 higher than the set value9. The detected value of HCHO is 0.03 mg/m3 higher than the set value10. Pollution: Buzzer fast sound alarm11. The detected value of CO2 is 100ppm higher than the set value12. The TVOC detection value is 0.02 mg/m3 higher than the set value13. The detected value of HCHO is 0.06 mg/m3 higher than the set value14. When the battery power is too low, the battery box will flash to remind the user to charge15. When charging, the characters in the battery frame will flash in sequence until the battery symbol is fully displayed when the battery is fully charged16. Humidity measurement range: 0～99.0RHimportant hint:1. Before use, please read the following detailed introduction carefully, and use the instrument correctly according to the manual2. Do not disassemble the instrument or throw it into fire3. Avoid operating the instrument in a strong wind environment4. Avoid shock and drop5. If it is not used for a long time, the warm-up time for the power-on will be longer6. Note: Do not let liquid flow into the instrumentSpecification: Package Weight One Package Weight 0.48kgs / 1.07lb One Package Size 27cm * 7cm * 22cm / 10.63inch * 2.76inch * 8.66inch Qty per Carton 108 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 108 pcs = 19116 pcs40HQ: 412 cartons * 108 pcs = 44496 pcs

Read more less

Features1. Automatically sense the liquid to avoid contact and make it safer 2. Using a new chip, faster sensing time (500ms) 3. High temperature measurement accuracy, accuracy tolerance: +/-0.2 (34~42 degrees Celsius) 4. With abnormal temperature light prompt and voice warning 5. The appearance is extremely simple and can be integrated into various environments 6. The front cover is opened with a convenient magnetic design, making it easier to change materials 7. It can be connected to a USB power supply, a power bank, and two 18650 lithium batteries (not included) 8. Smart light-sensitive forehead thermometer, no need to hold it, it can be fixed with wall mount or tripod 9. Support setting 36-39 degrees Celsius alarm upper limit 10. Support voice broadcast in 12 countries, human body model broadcast: "Normal body temperature", "Please re-measure" 11. Up-drawing catheter, never leaking, never clogging 12. The battery is easy to install, intelligent circuit protection, and theSpecification1. Temperature measurement technology: Automatic non-contact temperature measurement and disinfection 2. Measuring method: Photosensitive sensor distance sensor 3. Unit of measurement: C and F degrees (Celsius and Fahrenheit) 4. Accuracy tolerance: +/-0.2 (34~42 degrees Celsius) 5. Measuring distance: About 5cm automatic measurement 6. Capacity of liquid bottle: 450ml 8. Liquid type: Liquid hand sanitizer, liquid disinfectant 9. Display mode: Digital display 10. Placement: Wall-mounted, bracket fixed 11. Power supply: USB plug / 2 18650 batteries (not included) 12. Response time: 0.5s 13. Standby time: 5S standby during non-working time, white point dynamic cycle 14. Product size: 208 x 115 x 86mm 15. Product net weight: 800g 16. Working mode: Human body mode, counting mode, surface mode 17. Human body temperature measurement range: 35-42 degrees Celsius 18. Working environment temperature range: 10-40 degrees Celsius (15-35 degrees Celsius recommended) 19. Counting mode counting range: 0-999 20. Abnormal measurement temperature: The display shows the temperature value, the middle alarm light flashes red, and an alarm sounds 21. Volume settings: Support settings (five levels of volume settings) 22. Alarm upper limit: Support setting (36-39 degrees Celsius) 23. Voice broadcast: Support 12 languages a??a??for broadcast 24. Automatic shutdown: 5S standby during non-working time, white dot dynamic cycle 25. Whether to support charging: Support charging 26. Whether to support outdoor measurement: Not support use in the sunSpecification: Package Weight One Package Weight 0.96kgs / 2.11lb One Package Size 27cm * 15cm * 12cm / 10.63inch * 5.91inch * 4.72inch Qty per Carton 12 Carton Weight 12.00kgs / 26.46lb Carton Size 48cm * 43cm * 30cm / 18.9inch * 16.93inch * 11.81inch Loading Container 20GP: 430 cartons * 12 pcs = 5160 pcs40HQ: 999 cartons * 12 pcs = 11988 pcs

Read more less

1. Lightweight sensor design, easy to install. 2. Monitor temperature and pressure with high precision and display 6 tires at the same time. 3. Save fuel, check for air leaks, reduce tire wear, balance tire pressure, and ensure safe driving. 4. 180-degree adjustable angle to meet different needs. 5. 3.2-inch high-definition display, the data is clear at a glance. 6. Air pressure value: 15BarSpecification: Package Weight One Package Weight 0.33kgs / 0.73lb One Package Size 16cm * 15cm * 6cm / 6.3inch * 5.91inch * 2.36inch Qty per Carton 30 Carton Weight 11.25kgs / 24.80lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 30 pcs = 15660 pcs40HQ: 1212 cartons * 30 pcs = 36360 pcs

Read more less

1. Size: 5*5*1.5cm 2. Battery specifications: CR2032 3. Operating temperature: -10 degrees - +50 degrees 4. IP67 waterproof and dustproof 5. When the water level of the detection site is higher than 0.5mm,the sensor will alarm and your mobile phone app will receive information,remind you to take appropriate action.The alarm will release after the water level become normal. 6. This sensor must work with the mijia multifunctional gateway or mijia air conditioning companion or aqara air conditioning companionSpecification: General Receiver Size 5*5*1.5cm Receiver Weight 60g Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 6cm * 6cm * 2cm / 2.36inch * 2.36inch * 0.79inch Qty per Carton 200 Carton Weight 13.50kgs / 29.76lb Carton Size 32cm * 26cm * 22cm / 12.6inch * 10.24inch * 8.66inch Loading Container 20GP: 1456 cartons * 200 pcs = 291200 pcs40HQ: 3382 cartons * 200 pcs = 676400 pcs

Read more less

1. Features the RP2350B microcontroller chip designed by Raspberry Pi.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both running at up to 150MHz, allowing users to flexibly switch between the two architectures.3. Built-in 520KB of SRAM and 16MB of on-chip Flash.4. Uses a Type-C interface, eliminating concerns about correct plug orientation.5. Uses high-quality relays, allowing connection of loads: 10A 250V AC or 10A 30V DC.6. Digital input with bidirectional optocoupler isolation, supporting passive and active digital inputs; relays support control in conjunction with switch inputs.7. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.8. On-board pin header interface for connecting other devices.9. On-board terminal block power interface, supporting a wide voltage range of 7~36V, convenient for industrial power supply.10. On-board RTC clock chip, supporting scheduled tasks.11. On-board W5500 Ethernet chip, extending 10/100Mbps network connectivity via SPI interface.12. PoE Ethernet port version supports external PoE modules for Power over Ethernet functionality (compliant with IEEE 802.3af standard).13. On-board optocoupler isolation to prevent high-voltage circuits connected to the relays from interfering with the control chip.14. On-board digital isolation to prevent external signals from interfering with the control chip.15. On-board integrated power isolation, providing stable isolated voltage; no additional power supply is required for the isolated end.16. On-board Micro SD card slot for external SD card storage of images or files.17. On-board buzzer, RGB LED, and power and RS485 transceiver indicator lights for easy monitoring of device operating status.18. DIN rail mountable ABS protective casing for easy installation and safer use.19. USB 1.1 host and device support.20. Supports low-power sleep and hibernation modes21. Can be recognized as a mass storage device via USB for drag-and-drop program download22. 15 multi-functional GPIO pins23. 2 SPI, 2 I2C, 2 UART, 8 12-bit ADCs, and 12 controllable PWM channels14. Precise on-chip clock and timers, temperature sensor, on-chip accelerated floating-point library15. 12 programmable I/O (PIO) state machines for custom peripheral support16. Built-in power isolation, optocoupler isolation and other protection circuits for safety, stability and reliability17. Dimensions: 175x90x40mmProduct parameters:- USB interface1. Interface type: USB Type-C2. Power supply voltage: 5V3. Functions: device power supply, USB communication and firmware download, etc.- Isolated communication Interface1. Interface type: RS4852. Interface form: terminal block3. Direction control: hardware automatic detection and control of data transmission direction4. Interface protection: provides TVS tube protection, surge and electrostatic protection5. Matching resistor: default NC, 120R matching resistor reserved, can be enabled by jumper cap- Digital Input1. Number of inputs: 8 channels2. Input voltage range: 5V ~ 36V3. Input type: passive input / active input (NPN type or PNP type)4. Isolation type: Bidirectional optocoupler isolation- Relay1. Number of channels: 8 channels2. Contact type: one normally open, one normally closed3. Isolation type: optocoupler isolation- Indicator lights1. RGB: colorful cool LED beads, customizable display color2. PWR: power indicator light, lights up red when USB is connected and voltage is detected3. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface4. RXD: receive indicator light, lights up when data is received from RS485 The blue light illuminates when the interface receives data.5. Power supply range: 7V ~ 36VSpecification: Package Weight One Package Weight 0.34kgs / 0.76lb One Package Size 20cm * 12cm * 6cm / 7.87inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 11.30kgs / 24.91lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 30 pcs = 15660 pcs40HQ: 1212 cartons * 30 pcs = 36360 pcs

Read more less

1. Temperature measurement range: -20-60 degrees Celsius2. Humidity range: 0-100 percent RH3. Detection probe: Integrated sensor4. Output type: relay output5. Output capacity: up to 10A6. Power supply voltage: DC 6-30V7. Suitable for opening size: about 7.5x3.95cm8. Weight: about 95 grams9. Appearance size: about 7.1x3.9cmFunction:1. Remote reading/setting of parameters: parameters such as start temperature/humidity, stop temperature/humidity, temperature/humidity, correction can be set through UART2. Real-time temperature/humidity reporting: If the temperature/humidity reporting function is enabled, the temperature/humidity and relay status will be detected at 1s intervals, and transmitted to the terminal through UART to facilitate data collection3. Relay enable (default on): If the relay enable is turned off, the relay remains disconnectedSpecification: Package Weight One Package Weight 0.11kgs / 0.23lb One Package Size 10cm * 5cm * 5cm / 3.94inch * 1.97inch * 1.97inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs40HQ: 412 cartons * 242 pcs = 99704 pcs

Read more less

1. Lightweight sensor design, easy to install. 2. Monitor temperature and pressure with high precision and display 6 tires at the same time. 3. Save fuel, check for air leaks, reduce tire wear, balance tire pressure, and ensure safe driving. 4. 180-degree adjustable angle to meet different needs. 5. 3.2-inch high-definition display, the data is clear at a glance. 6. Air pressure: 8 BarSpecification: Package Weight One Package Weight 0.38kgs / 0.84lb One Package Size 16cm * 15cm * 6cm / 6.3inch * 5.91inch * 2.36inch Qty per Carton 30 Carton Weight 11.25kgs / 24.80lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 30 pcs = 15660 pcs40HQ: 1212 cartons * 30 pcs = 36360 pcs

Read more less

1. Power supply: TYPE-C cable2. Automatic shutdown: after 5 minutes of no operation3. Built-in: 300mAh lithium battery4. Mode: Metal, Cable, Wooden5. Ferrous metal detection depth: 120mm6. Non-ferrous metal (copper) detection depth: 100mm7. AC: 50mm8. Single-strand copper wire: 40mm9. Wooden gear: 20mm in precision mode, 38mm in depth mode10. Simple interface and buttons, easy to operate11. High-definition backlit screen display, silicone touch buttons12. Anti-slip texture on the side, ABS anti-fall shell13. There will be a sound reminder after the target is detected14. High-performance anti-jamming chip, reducing false positives and positioning faster15. Widely used in house decoration/retrofit, wall decoration/home appliance installation, bridge/highway maintenance16. Center positioning hole design, mark directly after detection17. Dimensions: 138x68x22mm18. Weight: 122 gramsSpecification: Package Weight One Package Weight 0.30kgs / 0.66lb One Package Size 21cm * 10cm * 5cm / 8.27inch * 3.94inch * 1.97inch Qty per Carton 112 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 112 pcs = 19824 pcs40HQ: 412 cartons * 112 pcs = 46144 pcs

Read more less

1. CO2 detection range: 400-6000PPM2. CO2 detection sensitivity: 1PPM3. Detection range: 0-2PPM4. Temperature measurement range: 0~60 degrees Celsius5. Temperature measurement accuracy: +/-1 degrees Celsius6. Humidity measurement range: 0%~99%RH7. Humidity measurement accuracy: +/-2%RH8. Charging method: DC5V 500mA micro USB interface9. Battery: Built-in lithium battery 1200mAh10. Size: 9 x 7 x 4cm/3.54 x 2.75 x 1.18inch11. Screen: about 2.75 inches12. Net weight: about 175gfeature:1. Five in one: It can be used as carbon dioxide concentration detection, thermometer and hygrometer at the same time.2. Built-in 1200mha lithium battery, fully charged can stand by for about 6-8 hours3. Color screen: display current CO2 data, temperature and humidity data. The color ring changes according to the CO2 content.4. Simple operation: long press the "on-off" button for 3 seconds to turn on and off. It will automatically detect CO2.5. Small and portable: it can be placed in the kitchen, living room, bedroom, or taken out.The package includes:1 x Carbon dioxide meter1 x USB charging cable1 x ManualSpecification: Package Weight One Package Weight 0.19kgs / 0.43lb One Package Size 12cm * 12cm * 5cm / 4.72inch * 4.72inch * 1.97inch Qty per Carton 100 Carton Weight 20.00kgs / 44.09lb Carton Size 50cm * 50cm * 40cm / 19.69inch * 19.69inch * 15.75inch Loading Container 20GP: 266 cartons * 100 pcs = 26600 pcs40HQ: 619 cartons * 100 pcs = 61900 pcs

Read more less

1. 1.5 inch LCD display 2. Working voltage: AC 100~240V, 50/60Hz 3. Control temperature range: 0~400C +/-1C 4. Alarm Mode: With upper/lower limit contact output alarm function 5. PID adjusting mode 6. Operation temperature: 0~50C 7. Comes with accessories & English user manual 8. Dimensions: 11.2 cm x 7.1 cm x 6.5 cm 9. Weight: 214 gSpecification: Package Weight One Package Weight 0.39kgs / 0.86lb One Package Size 12cm * 8cm * 8cm / 4.72inch * 3.15inch * 3.15inch Qty per Carton 60 Carton Weight 17.00kgs / 37.48lb Carton Size 40cm * 36cm * 32cm / 15.75inch * 14.17inch * 12.6inch Loading Container 20GP: 578 cartons * 60 pcs = 34680 pcs40HQ: 1343 cartons * 60 pcs = 80580 pcs

Read more less

1. Material: plastic2. Accuracy: 0.5 degrees Celsius (-20~40 degrees Celsius)3. Memory capacity: 10 minutes (customized design available)4. Startup delay: 10 minutes5. Data capacity: 100006. Communication interface: USB2.07. Report generation: PDF8. Report delay recording: 30 minutes9. Equipment storage environment: recommended humidity 20 TO 60%RH, temperature 10 TO 50 degrees Celsius10. No cables or readers are required, the USB connector can be quickly connected to a pc to download data11. The USB temperature data logger is a super fast and easy to configure data logger, no software installation is required12. The temperature and humidity logger provides all key information records, including alarms, temperature statistics, etc.13. Up to 10,000 temperature points and 10,000 humidity points14. The disposable USB temperature recorder is a simple and portable temperature recorder designed for cold chain.15. This product is widely used in the transportation and storage of food and products.16. Dimensions: 69x33x20mm17. Weight: 20gSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 9cm * 3cm / 2.36inch * 3.54inch * 1.18inch Qty per Carton 352 Carton Weight 11.70kgs / 25.79lb Carton Size 50cm * 38cm * 35cm / 19.69inch * 14.96inch * 13.78inch Loading Container 20GP: 401 cartons * 352 pcs = 141152 pcs40HQ: 930 cartons * 352 pcs = 327360 pcs

Read more less

BMP388 High Precision Barometric Pressure Sensor, Altitude / Barometric Pressure / Temperature Measuring, I2C/SPI InterfaceOverview1. This is a 24-bit high precision barometric pressure sensor, which allows accurate altitude tracing, as well as barometric pressure / temperature measuring. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels.2. Due to its ultra small form factor, low power consumption, low noise and high precision, the BMP388 Barometric Pressure Sensor is suited for applications such as drones, accurate altimeter, environment monitoring, and IoT projects, and so on.Features1. Supports I2C (default) / SPI interface2. Onboard voltage level translator, compatible with 3.3V/5V operating voltage3. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specifications1. Operating voltage: 3.3V/5V2. Communication interface: I2C/SPI3. Barometric pressure operation range: 300~1250hPa4. Barometric pressure absolute accuracy: +/-0.40hPa (@900~1100hPa, 25~40 degree C)5. Barometric pressure relative accuracy: +/-0.08hPa (@900~1100hPa, 25~40 degree C)6. Temperature coefficient offset: ±0.75Pa/K (@700~1100hPa, -20~65 degree C)7. Temperature absolute accuracy: +/-0.5 degree C (0~65 degree C）8. Possible resolution: 0.016Pa (high precision mode)9. Possible sampling rate: 200Hz10. Operating voltage: -40~85 degree C11. Dimension: 32mm × 20mm12. Mounting hole size: 2.0mmPinouts1. VCC: 3.3V/5V power supply2. GND: Ground3. SDA: I2C data4. SCL: I2C clock5. INT: Interrupt output, can be connected to I/OPackage Contents1. BMP388 Barometric Pressure Sensor x12. PH2.0 5PIN wire x1Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs40HQ: 661 cartons * 6240 pcs = 4124640 pcs

Read more less