Search results for "arduino compatible"

Features1. Comes with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, supports 5G NSA and SA networking, supports multi-mode multi-band 2. Multi-constellation dual-band positioning: GPS, Beidou, Glonass, Galileo, and QZSS 3. Operating system support: Windows/Linux/Android 4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication 5. Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 series 6. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 9. 4x SMA to IPEX antenna connectors, with pre-soldered SMA terminals for connecting antennas 10. 2x SIM card slot, dual card single standby, switchable via AT command 11. Onboard audio jack and audio decoder, allows audio operation like making phone call 12. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. Sub-6G (SA): n1, n2, n3, n5, n7, n8, n12, n20, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 2. Sub-6G (NSA): n41, n77, n78, n79 3. LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 4. LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48 5. WCDMA: B1, B2, B3, B4, B5, B8 6. GNSS: GPS, GLONASS, Beidou, Galileo, and QZSS Data rate 1. Sub-6G: 2.4 Gbps (DL) / 500 Mbps (UL) 2. LTE: 1 Gbps (DL) / 200 Mbps (UL) 3. HSPA+: 42 Mbps (DL) / 5.76 Mbps (UL) Software functions 1. Operating systems: Windows/Linux/Android 2. Communication protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 3. SMS: Supports MT, MO, CB, Text, PDU 4. Firmware upgrade: Supports firmware upgrade via USB port Applications 1. Applicable regions: Regions with 5G Sub-6G signal coverage including China, US, Japan, South Kor, Europe, the Middle East, Latin America, etc. 2. Application examples: CPE, Smart gateway, Drone, Live streaming, Remote treatment, Intelligent securityPackage List1. M.2 TO 4G/5G HAT x1 2. SIM8202G-M2 x1 3. Antenna 4pcs x1 4. IPEX adapter cable 4pcs x1 5. 2 x 20PIN pin header x1 6. Passive GPS antenna x1 7. Dual plug USB3.0 cable x1 8. USB 3.0 adapter x1 9. USB 2.0 adapter x1 10. SMA protective cap 4pcs x1 11. Screws pack x1Specification: Package Weight One Package Weight 0.34kgs / 0.74lb One Package Size 20cm * 16cm * 4cm / 7.87inch * 6.3inch * 1.57inch Qty per Carton 40 Carton Weight 11.00kgs / 24.25lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 40 pcs = 22640 pcs40HQ: 1314 cartons * 40 pcs = 52560 pcs

Read more less

1.Designed for laser engraver, 3D printer, CNC mill, arduino project.2. 7.5W Optical power output, 4mm plywood from 1 pass(speed 100).3. More Safety, Built-in protective glass to protect eyes! Even without wearing protective glasses, the operation is more comfortable.4. More Quiet, Intelligent drive adjust the cooling fan speed according to laser temperature.5. Easy use, Digital PWM wave pulse signal generator adjustable frequency duty cycle board for NEJE laser module.6. The slidable mounting fixture is provided for easy adjustment of focus.Specification1. Heatsink Material: Aircraft Aluminum + Brass Shell2. Luminous Color: Blue3. Section Size: 40mm x 40mm4. Cooling Mode: Temperature sensor intelligent control + 10000 rpm 40mm cooling fan5. Dimension: 60 x 40 x 40mm6. Adapter Plug: 5.5 2.1 port7. Can Engrave: MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum8. Can Not Engrave: Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent MaterialTechnical Parameters1. Optical power output: 5.5W~7.5W2. Wavelength: 445-450nm3. Beam Shape: Dot (Focusable)4. Working Voltage: DC 12V5. TTL&PWM Modulation: YES, compatible with both TTL & PWM Modulation6. Input Voltage: DC12V 3A7. PWM/TTL Input: DC3.3V-12V8. Input Interface: PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-)9. Drive Mode: External ACC10. Safe temperature range: <60 degrees Celsius11. Module weight: 202g (The lighter the weight, the smaller the move inertia, the better the performance)12. Life Time: 10000-20,000 hoursPackage Included- 1 x Laser Engraving Module- 1 x Laser Module Sliding slot- 1 x 4 Pin Cable(32cm Cable)- 1 x NEJE interface tranfer board- 1 x 2.5mm L-shaped wrench- 1 x 5mm L-shaped wrench- 1 x 3pin input cableSpecification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 16cm * 10cm * 6cm / 6.3inch * 3.94inch * 2.36inch Qty per Carton 50 Carton Weight 22.00kgs / 48.50lb Carton Size 52cm * 34cm * 32cm / 20.47inch * 13.39inch * 12.6inch Loading Container 20GP: 471 cartons * 50 pcs = 23550 pcs40HQ: 1094 cartons * 50 pcs = 54700 pcs

Read more less

1. Humidity range: 0-1002. Material physical properties: semiconductor3. Output signal: digital4. Working voltage: 3.3V-5V5. Size: 3cm * 1.6cm6. Features: LM393 chip, stable operation, fixed bolt holes for easy installation, dual output mode of the module, simple digital output, more accurate analog output, and adjustable sensitivitySpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 5cm * 5cm * 2cm / 1.97inch * 1.97inch * 0.79inch Qty per Carton 500 Carton Weight 9.00kgs / 19.84lb Carton Size 39cm * 39cm * 15cm / 15.35inch * 15.35inch * 5.91inch Loading Container 20GP: 1168 cartons * 500 pcs = 584000 pcs40HQ: 2713 cartons * 500 pcs = 1356500 pcs

Read more less

1. Employs the Raspberry Pis officially designed RP2350 microcontroller chip.2. Unique dual-core, dual-architecture design, featuring a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at flexible clock speeds up to 150MHz.3. Uses Infineons CYW43439 wireless chip, supporting Wi-Fi 4 and Bluetooth 5.2.4. Built-in 520KB SRAM and 4MB on-chip Flash.5. Stamp hole design for direct soldering to user-designed baseboards.6. Pico 2 WH uses official solder headers; no stamp hole design, connection to the baseboard is only possible via headers.7. USB 1.1 host and device support.8. Supports low-power sleep and hibernation modes.9. Can be recognized as a mass storage device via USB for drag-and-drop program downloads.10. Up to 26 versatile GPIO pins.11. 2 One SPI, two I2C, two UARTs, three 12-bit ADCs, and 16 controllable PWM channels.12. Twelve programmable I/O (PIO) state machines for custom peripheral support.Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 5cm * 8cm * 3cm / 1.97inch * 3.15inch * 1.18inch Qty per Carton 462 Carton Weight 19.60kgs / 43.21lb Carton Size 50cm * 37cm * 35cm / 19.69inch * 14.57inch * 13.78inch Loading Container 20GP: 411 cartons * 462 pcs = 189882 pcs40HQ: 956 cartons * 462 pcs = 441672 pcs

Read more less

Product manual：1. Through-beam photoelectric switch (IRSW20B) is a customizable USB button.It is equivalent to a standard HID USB keyboard and mouse. The switch function can be customized to any key,combination, mouse or character string through the supporting software settings. After the definition is completed, no software is required during use.2. Products are widely used in printers, copiers, game consoles, factory inspections, instrument control, equipment, etc. as well as mobile monitoring, proximity switch monitoring and occasions where it is not convenient to use mechanical switches to improve efficiency.3. The switch adopts a through-beam photoelectric trigger mode. The infrared emitting tube in the device emits infrared light. If there is an object in the middle of the groove, the receiving sensor will trigger the corresponding key value if the infrared light is not detected.4. Provides button definition setting software based on Windows system. After setting, you can use it in the following systems: Dos, Win 2000, Win XP, Win vista, Win 7, Win 8, Win10, Linux, Mac, Android.5. Scope of application: office, game, industry, disabled personFunction Description：1. Keyboard function: It can be set to any key value or key combination, for example, to key value A or CTRL+A.2. Mouse function: It can be set to the left, middle, right, forward and backward keys of the mouse, the movement of the X and Y axes, and the up and down scrolling functions of the wheel.3. String printing: You can set up to 38 characters, for example, set "hello!".4. Multimedia function: It can be set as previous song, next song, volume up, volume down and other multimedia control functions.5. Gamepad function: It can be set as up, down, left and right four direction keys and 6 function keys.When you want to change the function of the button, you can use the FootSwitch software to modify the button function:1. Insert the device into the computer USB port2. Run the software FootSwitch3. Click to select the corresponding setting window4. Click or enter the function you want to set5. Click Save to confirm.6. The setting software only supports Windows system. The FootSwitch software is often upgraded. Please follow the latest version.Product specifications:1. Product model: IRSW20B2. Interface type: USB3. Power supply: 5V30mA4. USB cable length: 2 meters (the cable length can be customized)5. Product weight: about 65 gramsOutline dimension drawing and installation hole position drawing as show picturesSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 100 Carton Weight 7.00kgs / 15.43lb Carton Size 30cm * 30cm * 28cm / 11.81inch * 11.81inch * 11.02inch Loading Container 20GP: 1058 cartons * 100 pcs = 105800 pcs40HQ: 2456 cartons * 100 pcs = 245600 pcs

Read more less

1. Includes a port expansion board, expanding the connection options of the module2. Provides ample storage space for storing complex firmware, enhancing the functionality of the module3. Suitable for various power supplies, meeting your project requirements4. Operates reliably within normal temperature range, ensuring stable performance in various environments5. A multi-functional board suitable for intelligent electronic projectsSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 7cm * 6cm * 5cm / 2.76inch * 2.36inch * 1.97inch Qty per Carton 216 Carton Weight 6.00kgs / 13.23lb Carton Size 47cm * 38cm * 30cm / 18.5inch * 14.96inch * 11.81inch Loading Container 20GP: 497 cartons * 216 pcs = 107352 pcs40HQ: 1155 cartons * 216 pcs = 249480 pcs

Read more less

1. The entire casing is made of aluminum alloy, which can conduct and dissipate heat over a large area. Coupled with heat dissipation fins, the heat dissipation is more efficient2. The detailed hole layout ensures that each interface can fit tightly to the motherboard, and the interface areas are marked with clear silk-screening for easy viewing3. There are more abundant interfaces, equipped with ETH / MIPI / HDMI / Micro SD / USB / M.2 B KEY / M KEY and other various interfaces. They are more convenient to use4. It supports rail brackets. The back of the host is reserved for installation screw holes, allowing it to be fixed on the rail5. It is equipped with a standard CM5 connector, supporting the connection of Compute Module 5 Lite / eMMC series core boardsParameters1. CM5 slot: suitable for all versions of Compute Module 52. Networking: 1000M Ethernet RJ45 interface x 1; 2500M Ethernet RJ45 interface x 13. Video: HDMI interface x 1, supporting 4K output4. USB: USB 2.0 interface (Type-C) x 1; USB 2.0 interface (Type-A) x 1; USB 3.2 Gen1 interface (Type-A) x 15. M.2: M.2 M KEY (PCIe Gen2/3 x 1, supporting 2230/2242/2280 NVMe or AI module); M.2 B KEY, supporting 4G/5G communication module6. Storage: built-in Micro SD card slot (applicable to CM5 versions without eMMC)7. Serial interface: RS485 x 48. Digital input: digital input x 1 (input voltage: 5V - 36V)9. Relay: allows connection of loads: less than or equal to 10A 250V AC or less than or equal to 10A 30V DC10. Fan interface: 5V, 4PIN JST-SH PWM fan connector11. Beeper: single-channel controllable12. Others: built-in encryption chip13. Power input: 7V - 36V wide voltage (terminal + round hole) or 5V 5A (Type-C)14. Size: about 13.25 x 11.22 x 3.45 cmPackaging list:- Metal casing (top cover + bottom shell) and two baffles- CM5-ETH-RS485-4G-BASE x 1- Guide clip (20 x 76mm) x 1- Label x 1- Pink high thermal conductivity silicone sheet x 5- PC insulating sheet (104 x 40 x 0.2mm) x 1- Cross-head screwdriver x 1- Screw pack x 1- 12V 4A power supply x 1Specification: Package Weight One Package Weight 0.71kgs / 1.56lb One Package Size 20cm * 16cm * 8cm / 7.87inch * 6.3inch * 3.15inch Qty per Carton 16 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 34cm * 34cm / 16.54inch * 13.39inch * 13.39inch Loading Container 20GP: 549 cartons * 16 pcs = 8784 pcs40HQ: 1275 cartons * 16 pcs = 20400 pcs

Read more less

1. Sensor model: 2.51MP RGGB2. Resolution: 1920 x 10803. CMOS size: 1/2.57inch4. Pixel size: 3 x 3 um5. Field of view (FOV): 195° (Horizontal) x 152° (Vertical)6. Aperture (F.No): 27. Focal Length (EFL): 1.51mm8. Depth of field: 0.083m - infinity (fixed at 0.4m)9. Distortion: less than -155%10. ISP: built-in11. Frame rate: 1920 x 1080 30fps12. HDR (High dynamic imaging): supported13. LFM (LED flash suppression): supported14. Output format: YUV422 8bit15. Serializer model: MAXIM MAX96717F16. I2C address: 0x80 (8-bit address)17. Camera interface: fakra Z type connector18. Operating voltage: 9 - 12V PoC19. Operating current: less than 200mA 12V20. Operating temperature: -40°C - 85°C21. Protection level: IP67Packaging list:- GMSL-2MP-Camera-A main unit x 1- GMSL Camera wiring (2m double-jumper coaxial cable assembly) x 1Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 6cm * 6cm * 5cm / 2.36inch * 2.36inch * 1.97inch Qty per Carton 270 Carton Weight 23.00kgs / 50.71lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 270 pcs = 125820 pcs40HQ: 1083 cartons * 270 pcs = 292410 pcs

Read more less

1. The ESP32-S3-RGB-Matrix is a high-performance, highly integrated LED matrix panel driver board. It is suitable for HUB75 interface RGB matrix panels and related embedded applications. Based on the ESP32-S3 microcontroller, it integrates large-capacity Flash storage, RTC chip, IMU, TF card slot, low-power audio codec chip, dual microphones, and so on. It also provides reserved interfaces such as USB, UART, I2C, and GPIO, offering strong scalability and enabling users to quickly develop and integrate it into practical applications.3. Supports 2.4 GHz Wi-Fi and Bluetooth 5 (BLE) dual-mode communication4. Includes 512KB SRAM and 384KB ROM; integrates 32MB Flash and 16MB PSRAM to meet storage requirements across various scenarios5. Compatible with the full range of Waveshare Matrix-RGB panel sizes; capable of smoothly running graphical interface programs like LVGL6. Onboard ES7210 echo cancellation chip for enhanced voice processing performance7. Onboard ES8311 low-power audio codec chip, supporting high-quality audio input and output8. Equipped with a dual-microphone array supporting noise reduction and echo cancellation algorithms; suitable for applications such as voice recognition and wake-up9. Onboard speaker interface for audio output; allows for direct connection to a speaker10. Integrates the QMI8658 6-axis IMU (3-axis accelerometer + 3-axis gyroscope) for attitude detection11. Integrates the SHTC3 temperature and humidity sensor for precise environmental monitoring12. Onboard Micro SD card slot for storing images, audio, and various data files, facilitating easy data read/write operations13. Onboard PCF85063 RTC chip and reserved SH1.0 battery interface; supports timekeeping during power outages14. Reserved GPIO expansion interface for peripheral expansion and custom functionality, catering to diverse development needs15. Dual power supply interface design; supports stable operation of up to six 64×64 Matrix-RGB panels and allows for cascading expansion to meet large-format display requirements16. Onboard USB Type-C interface for power supply, programming, and debugging17. Onboard RST and BOOT buttons; the BOOT button supports custom functions, enhancing development flexibilitySpecifications:1. Power supply voltage: 5V2. Maximum current capacity: 10A3. Supported resolutions: 64 × 64 | 64 × 32 | 80 × 40 | 96 × 484. Interface type: HUB755. Maximum resolution (cascaded): 6 × 64 × 646. Operating temperature range: -40 ~ +85 degrees Celsius7. Product dimensions: 50 × 42 mmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 120 Carton Weight 13.10kgs / 28.88lb Carton Size 34cm * 42cm * 32cm / 13.39inch * 16.54inch * 12.6inch Loading Container 20GP: 583 cartons * 120 pcs = 69960 pcs40HQ: 1354 cartons * 120 pcs = 162480 pcs

Read more less

1. IPS screen, 1024x600 hardware resolution, configurable by software (up to 1920x1080)2. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers3. When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free4. When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free5. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc.6. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.3. 3.5mm audio jack, speaker connector, supports HDMI audio output8. Also supports VGA input (specific cable is required and should be purchased separately)Specification: Package Weight One Package Weight 0.41kgs / 0.89lb One Package Size 22cm * 15cm * 10cm / 8.66inch * 5.91inch * 3.94inch Qty per Carton 16 Carton Weight 5.70kgs / 12.57lb Carton Size 44cm * 30cm * 40cm / 17.32inch * 11.81inch * 15.75inch Loading Container 20GP: 505 cartons * 16 pcs = 8080 pcs40HQ: 1172 cartons * 16 pcs = 18752 pcs

Read more less

1. Size: 6.8CM x 2.1CM2. Main chip: NE5553. Working voltage: DC 12V/5VFeatures:1. The relay time delay and power supply is connected.Specific as follows: for 12V/5V power supply to the relay, relay not immediately and absorption, relay the output status to: normally open and public disconnect, normally closed and public conduction;Wait for delay 1-10 s (adjustable), relay and absorption, at this point, the relay outputs status to: normally open and public conduction, normally closed and public disconnected;As long as the module power continuously, this state will remain.2. The delay time is adjustable, (0-10 seconds)4. Increase the potentiometer to increase the delay time5. Increasing the capacitor C1 can increase the delay time6. With input power indicator light7. With relay pull-in indicator light8. It can control AC 220V/10A equipment. (Large control equipment 2000W)9. With relay freewheeling protection.10. Delay time formula: T=1.1RC. For example: capacitor 100uf resistor 100K T=1.1 x 100000 x 0.0001=11 secondsApplications1. The on-board equipment on the time delay, prevent excessive current when the car lighter burned on-board equipment.2. Need to have order to start the occasion, to prevent multiple devices at the same time starting current is too large burning appliances.Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 14cm * 7cm * 4cm / 5.51inch * 2.76inch * 1.57inch Qty per Carton 500 Carton Weight 12.00kgs / 26.46lb Carton Size 30cm * 50cm * 40cm / 11.81inch * 19.69inch * 15.75inch Loading Container 20GP: 444 cartons * 500 pcs = 222000 pcs40HQ: 1031 cartons * 500 pcs = 515500 pcs

Read more less

Gateway module features:1. On-board Semtech SX1302/3 baseband processor and SX1250 RF front-end chipset2. On-board PA and LNA, with +26 dBm transmit power and -141 dBm receive sensitivity3. The SX1303 supports fine-grained timestamping, enabling network positioning based on Time Difference of Arrival (TDOA)4. Mini-PCIe form factor with 52-pin header, facilitating integration into various embedded systems5. Four onboard LED indicators for easy monitoring of module operating statusExpansion board features:1. Based on the Raspberry Pi 40-pin GPIO interface, compatible with Raspberry Pi series motherboards2. On-board L76K module supporting GPS and Beidou, providing precise clock and positioning coordinates for the gateway moduleModule specifications1. Baseband chip: SX1302: 868 MHz, 915 MHz; SX1303: 868 MHz, 915 MHz2. Frequency bands: 868 MHz: EU868, IN865, RU864; 915 MHz: US915, AU915, KR9203. Supply voltage: 5V4. Modulation: LoRa/(G)FSK5. Transmit power: +26 dBm at 5V6. Receive sensitivity: -141 dBm at 125 kHz/SF12; -121 dBm at 125 kHz/SF57. Communication interfaces: SPI, I2C8. Form factor: Mini-PCIe9. Operating temperature: -40–85°C10. Total power consumption: SX1302: Transmit: 454mA at 5V; Receive: 42mA at 5V; Sleep: 11mA at 5V; SX1303: Transmit: 427mA at 5V; Receive: 40mA at 5V; Sleep: 8mA at 5V11. Size: about 5.095 x 3 cmPackage contents (Without expansion board):- SX130x module x 1- IPEX-to-SMA adapter (Male-to-Female, about 17 cm) x 1- 868 MHz/915 MHz rubber rod antenna x 1Package contents (With expansion board):- SX130x module x 1- 868 MHz/915 MHz rubber rod antenna x 1- Expansion board x 1- GPS antenna x 1- 2x20-pin header x 1- IPEX-1 (black) dual-ended cable x 1- Screw pack x 1Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 5cm * 4cm / 3.94inch * 1.97inch * 1.57inch Qty per Carton 252 Carton Weight 12.00kgs / 26.46lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 252 pcs = 113400 pcs40HQ: 1045 cartons * 252 pcs = 263340 pcs

Read more less