Search results for "plant moisture sensor"

Instrument instructions:1. After the test, the power of the equipment must be turned off to avoid accidents2. Prevent the instrument from violent vibration3. After placing the instrument for a long time, the odor gas will accumulate in the instrument, which will seriously affect the test results, in this case, the instrument must be placed in a cool and ventilated place, and then used for more than 1 hour (no operation is required during the ventilation process instrument)4. The expired and defective products should be repaired in time.5. Avoid shocking the sensor with gas higher than the measurement range, otherwise it may damage the sensor, and man-made damage is not covered by the warrantyInstrument introduction:1. Digital temperature and humidity sensor2. LCD display3. Mute button: Turn on or off the alarm sound. In the silent mode, the " " symbol is not displayed and there is no alarm sound. The default is to turn on the sound4. "+" button: When setting the alarm value, increase the value.5. Power button: long press for 2 seconds to turn on or off the power, when power on, the number field counts down from 1206. Temperature unit selection button: Celsius and Fahrenheit conversion7. "-" button: When setting the alarm value, decrease the value8. Setting button: Short press this button to set the alarm value of "CO2→TVOC→HCHO" in sequence, the original factory setting value will be displayed and flashing, and the parameter will be adjusted by the "+" button and "-" button, and the value will be displayed after 10 seconds. automatic storage9. Power supply: DC5V built-in 1800mAh lithium battery10. Dimensions: 195x95x35mm11. Carton packaging weight: 270 gramsDisplay content introduction:1. Alarm sound: press the "mute button" to operate2. CO2 measurement range: 350ppm～2000ppm3. TVOC measuring range: 0.000 mg/m3～2.000 mg/m34. HCHO measuring range: 0.000 mg/m3～1.000 mg/m35. Temperature display: press the "temperature unit selection button" to operate6. Measuring range: 0-90.0 degrees Celsius, 32-194 degrees Fahrenheit7. Environmental quality reminder: excellent, the detection value is lower than the set value; good, the CO2 detection value is 50ppm higher than the set value8. The TVOC detection value is 0.01 mg/m3 higher than the set value9. The detected value of HCHO is 0.03 mg/m3 higher than the set value10. Pollution: Buzzer fast sound alarm11. The detected value of CO2 is 100ppm higher than the set value12. The TVOC detection value is 0.02 mg/m3 higher than the set value13. The detected value of HCHO is 0.06 mg/m3 higher than the set value14. When the battery power is too low, the battery box will flash to remind the user to charge15. When charging, the characters in the battery frame will flash in sequence until the battery symbol is fully displayed when the battery is fully charged16. Humidity measurement range: 0～99.0RHimportant hint:1. Before use, please read the following detailed introduction carefully, and use the instrument correctly according to the manual2. Do not disassemble the instrument or throw it into fire3. Avoid operating the instrument in a strong wind environment4. Avoid shock and drop5. If it is not used for a long time, the warm-up time for the power-on will be longer6. Note: Do not let liquid flow into the instrumentSpecification: Package Weight One Package Weight 0.48kgs / 1.07lb One Package Size 27cm * 7cm * 22cm / 10.63inch * 2.76inch * 8.66inch Qty per Carton 108 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 108 pcs = 19116 pcs40HQ: 412 cartons * 108 pcs = 44496 pcs

Read more less

Specifications: 1. Humidity resolution: 0.1%RH 2. Sampling rate: 2.5 times/sec 3. MAX/ MIN function 4. Large LCD temperature & humidity dual display Features: 1. Accuracy of temperature: +/-1 degree C or +/-11.8 degree F 2. Temperature range: -10 degree C~50 degree C 3. Humidity range: 5%RH ~ 98%RH 4. Accuracy of humidity: +/- 3%(30-95%); +/- 5%(10-30%); degree C/ degree F selection 5. Auto /Manual power shut off 6. Low battery indication 7. Data hold 8. Temperature resolution: 0.1 degree C 9. Humidity resolution: 0.1%RH 10. Sampling rate: 2.5 times/sec 11. Power: 9V battery (Included)Specification: Package Weight One Package Weight 0.80kgs / 1.76lb One Package Size 27cm * 22cm * 6.5cm / 10.63inch * 8.66inch * 2.56inch Qty per Carton 20 Carton Weight 16.50kgs / 36.38lb Carton Size 55cm * 45cm * 36cm / 21.65inch * 17.72inch * 14.17inch Loading Container 20GP: 299 cartons * 20 pcs = 5980 pcs40HQ: 694 cartons * 20 pcs = 13880 pcs

Read more less

1. Measuring range: 0.00~14.002. Power supply: 9V battery (not included)3. Widely used in industry, electric power, agriculture, medicine, food, water quality testing, scientific research and environmental protection and other fields4. Large-screen LCD display, accurate and clear handwriting5. Reserve the bracket port, which can be used by hand or bracket, which is convenient and practical6. PH composite electrode probe, fast, convenient, accurate and easy to deal with various environments7. Connected electrode interface, portable8. Weight: 205 grams9. Dimensions: 159x66x31mmSpecification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 17cm * 10cm * 6cm / 6.69inch * 3.94inch * 2.36inch Qty per Carton 118 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 118 pcs = 20886 pcs40HQ: 412 cartons * 118 pcs = 48616 pcs

Read more less

1. Temperature: -20-60 degrees C (-4°F-140°F) / +1.5 degrees C2. Dew point temperature: -50.0-60.0 degrees C (-58.0°F - 140.0°F) / + 1.5 degrees C3. Wet bulb temperature: -20.0-60.0 degrees C (-4.0°F - 140.0°F) / + 1.5 degrees C4. Humidity: 0-100% / +5%5. Battery type: 3x1.5V AAA batteries6. Size: 142x58mm7. Weight: 0.212kg8. Function: support data saving/backlight/automatic shutdown/low battery indication9. Inlet probe sensor, short response time, strong anti-interference ability, more accurate data collection10. Multiple measurement units are displayed, wet bulb point/dew point are optional, and the unit can be switched according to different measurement requirementsNote: Shipment without batterySpecification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 9cm * 18.5cm * 5.5cm / 3.54inch * 7.28inch * 2.17inch Qty per Carton 50 Carton Weight 12.00kgs / 26.46lb Carton Size 42cm * 30cm * 30cm / 16.54inch * 11.81inch * 11.81inch Loading Container 20GP: 705 cartons * 50 pcs = 35250 pcs40HQ: 1637 cartons * 50 pcs = 81850 pcs

Read more less

Features1. The product can turn on or turn off light according to ambient-light. 2. Ambient-temperature and humidity can not affect it. 3. It is not only convenient but also practical. 4. Detection range: 10m (10%/30%/50%/80%/100%). 5. Delay time: 5s/15s/3min/5min/10min. 6. Light control: 5/10/30/100/disable. 7. Microwave frequency: 5.8GHz +/-75MHz. 8. Transmit power: <0.2mW. 9. Installation: Ceiling installation, wall hangings. 10. Detection angle: 180 degrees. 11. Installation height: Max. 2.5m. 12. IP rating: IP20. 13. It can control the load working only at night. 14. For instance road light, garden light etc.Dial Switch Instructions1. Light control setting Light response threshold 5 stalls to choose from, 5Lux,10Lux,30Lux,100Luxand disable, respectively, optical control of a brightness sensor to setthe threshold values as defined. 2. Delay setting Delay setting with 5 stalls to choose from, namely 5S,15S,180S,300S,600S;after induction, the output signal will remain within a preset time,detected during the mobile signal, delay will be included. 3. Sets the distance Distance setting with 5 stalls to choose from, namely10%,30%,50%,80%,100%; based on actual usage, choose a different distance.Specification: General Model TR-908 Material ABS Max Load 400W (max. of inductive load)/800W (max. of resistive load) Voltage 220-240V Working Temperature -10 C to + 60C Product Size 9*4.3*2.4cm Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 9cm * 5cm * 3cm / 3.54inch * 1.97inch * 1.18inch Qty per Carton 200 Carton Weight 16.50kgs / 36.38lb Carton Size 47cm * 22cm * 32cm / 18.5inch * 8.66inch * 12.6inch Loading Container 20GP: 805 cartons * 200 pcs = 161000 pcs40HQ: 1870 cartons * 200 pcs = 374000 pcs

Read more less

1. Moisture detection range: 0-4%2. Power supply: 2x1.5V AAA batteries (not included)3. Adopt high-quality sensors with high sensitivity, fast response speed and more stable measurement4. Three-color backlight indication: when the value is 0~2%, the green backlight indicates that the brake fluid is still available, when the value is 2~3%, the buzzer emits a yellow backlight and a slow beep, indicating that the brake fluid should be replaced, and when the value is higher than 3%, the backlight and the fast beep of the buzzer appear, indicating that the brake fluid needs to be replaced urgently5. The metal serpentine hose can flexibly adjust the probe direction during the test for easy detection6. Dual sound and light alarm, when the water content of the tested brake fluid is within the acceptable range or exceeds the acceptable range, the backlight of different colors will light up accordingly, and the buzzer will emit a synchronous alarm sound7. High-definition backlight display, the test results can be clearly displayed even in a dim environment8. One-touch switch, three oil types to choose from, multiple brake fluids can be tested, one-touch switching, convenient and fast9. When starting the measurement, press the data hold key to hold the data, and press any key to release10. LED flashlight lighting measurement is feasible, even in low-light environments or dim corners11. Low battery indicator When the battery voltage is too low, when you receive a low battery warning, please replace the battery in time to ensure uninterrupted testing12. Automatic shutdown, the product will automatically shut down after about 5 minutes of no signal detection or inactivity to extend battery life13. The silicone material button provides a comfortable touch, and the meter beeps when pressed to help users identify whether the current operation is valid14. Ergonomic design The device is small and portable, can be operated with one hand, and feels comfortable15. The device comes with a built-in calibration resistor socket. By inserting the probe into the calibration resistor socket, different measurement environments can be simulated to verify the measurement accuracy of the detector16. Before testing the automobile brake fluid, make sure the metal probe is clean, immerse the metal part of the test head completely in the liquid to be tested for 3 seconds, wait for the display to stabilize, observe the status, and then read the measurement value17. Corrosion, scratches or oxidation on the metal probe may affect the accuracy of the test. After testing a liquid, please clean the probe thoroughly to avoid affecting the subsequent test results18. Weight: about 95.5 g19. Dimensions: 340x45x28mmSpecification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 20cm * 12cm * 5cm / 7.87inch * 4.72inch * 1.97inch Qty per Carton 36 Carton Weight 7.60kgs / 16.75lb Carton Size 42cm * 38cm * 36cm / 16.54inch * 14.96inch * 14.17inch Loading Container 20GP: 464 cartons * 36 pcs = 16704 pcs40HQ: 1077 cartons * 36 pcs = 38772 pcs

Read more less

1. Material: ABS, electronic components2. Application: salinity/PH/TDS/EC/ORP/SG/temperature detection3. Waterproof grade: IP674. Built-in battery: LR44 x 3 (shipped without battery)5. Using highly sensitive glass electrodes, the detection speed is fast and the precision is high6. LCD high-definition display, easy to observe the test results7. Dimensions: 18.3 x 3.7 cmSpecification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 21cm * 8cm * 4.5cm / 8.27inch * 3.15inch * 1.77inch Qty per Carton 118 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 118 pcs = 20886 pcs40HQ: 412 cartons * 118 pcs = 48616 pcs

Read more less

Overview1. Sensitive for benzene, alcohol, smoke2. Output voltage boosts along with the concentration of the measured gases increases3. Fast response and recovery4. Adjustable sensitivity5. Signal output indicatorSpecifications1. Power: 2.5V ~ 5.0V2. Dimension: 40.0mm * 21.0mm3. Mounting holes size: 2.0mmApplicationsAir quality monitorHow to UseIn the case of working with a MCU:1. VCC: 2.5V ~ 5.0V2. GND: Power supply ground3. AOUT: MCU.IO (analog output)4. DOUT: MCU.IO (digital output)Package Contents1. MQ-135 Gas Sensor x12. 4-pin custom connector jumper wire x1Specification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 5cm * 4cm * 1cm / 1.97inch * 1.57inch * 0.39inch Qty per Carton 4800 Carton Weight 158.40kgs / 349.21lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 4800 pcs = 1329600 pcs40HQ: 644 cartons * 4800 pcs = 3091200 pcs

Read more less

1. Product function: The product is used to measure the changes of parameters such as temperature, humidity and atmospheric pressure in the environment, and accurately predict the future weather changes according to the changing trend of ambient temperature, humidity and atmospheric pressure. It is a fully functional household weather forecast instrument ( barometer). 2. Product features: silver / gold alloy aluminum outer ring, PMMA plastic lens, silver / gold adjustment wheel, multi-function display, large display panel double scale with weather change logo 3. Measuring range: -30 ~ 50C, 0 ~ 100% RH, 970 ~ 1050hPa, 4. Resolution: 1C, 2% RH, 1hPa 5. Measurement accuracy: +/-2C, +/-5%RH (40~70%RH), +/-5hPa (970~1040hPa)Specification: Package Weight One Package Weight 0.24kgs / 0.53lb One Package Size 13.5cm * 5cm * 13.5cm / 5.31inch * 1.97inch * 5.31inch Qty per Carton 208 Carton Weight 49.09kgs / 108.22lb Carton Size 79cm * 29cm * 79cm / 31.1inch * 11.42inch * 31.1inch Loading Container 20GP: 147 cartons * 208 pcs = 30576 pcs40HQ: 342 cartons * 208 pcs = 71136 pcs

Read more less

1. Operation method: in the off state, long press 1.5 seconds to turn on the machine; in the on state, double-click the button to switch the temperature unit; in the on state, long press 1.5 seconds to turn off the machine2. Function: can be used to measure temperature, measure humidity3. English + expression dual display, clear at a glance4. Placement: can be placed/hanging; with double-sided adhesive stickers, removable bracket5. Three air vents ventilation design, round hole ventilation holes, accelerate the induction speed6. Removable bracket design, disassemble and install at willParameters:1. Material: ABS2. Function: indoor temperature and humidity, comfort level display, switchable temperature units3. Temperature measurement range: -20-60 degrees celsius (-4-140 degrees fahrenheit)4. Temperature measurement accuracy: error of about 1 degrees celsius (1.8 degrees fahrenheit)5. Temperature resolution: 0.1 degree celsius (0.2 degree fahrenheit)6. Humidity range: 10-99 percent RH7. Humidity measurement accuracy: error of about 5 percent RH8. Humidity resolution: 1 percent9. Battery: 3V CR2032 button battery10. Size: 50 x 35 x 13mm, display size: 38 x 23mm11. Weight: 21gSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch Qty per Carton 400 Carton Weight 10.50kgs / 23.15lb Carton Size 45cm * 28cm * 20cm / 17.72inch * 11.02inch * 7.87inch Loading Container 20GP: 1058 cartons * 400 pcs = 423200 pcs40HQ: 2456 cartons * 400 pcs = 982400 pcs

Read more less

1. Instructions for use: brake fluid moisture tester pen by detecting changes in conductivity to measure the water content in the brake fluid, high water content will reduce the boiling point, affecting brake performance2. The sensor has high sensitivity and fast response to provide more stable measurement3. After measuring a fluid, be sure to clean the probe thoroughly so as not to affect the subsequent measurements4. Sound and light alarm: when the value of 2-3 percent or greater than 3 percent, the buzzer sounds5. Lightweight and compact pen clip design, easy to carry6. Data retention function: when measuring, long press the function switch button to keep the data7. When there is a low voltage indicator, please replace the battery in time8. Automatic shutdown: after powering on, if there is no signal or no operation for about 5 minutes, the tester will automatically shut down to prolong the battery life9. Automotive brake fluid test: before testing, make sure the metal probe is clean. Fully immerse the metal part of the probe in the liquid for 3 seconds. Once the display stabilizes, observe the status to read the measured value10. Power supply: 2 x 1.5V AAA batteries (not included in delivery)11. Dimensions: 204 x 24 x 30mm12. Weight: about 58gSpecification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 26cm * 7cm * 4cm / 10.24inch * 2.76inch * 1.57inch Qty per Carton 80 Carton Weight 10.00kgs / 22.05lb Carton Size 54cm * 36cm * 36cm / 21.26inch * 14.17inch * 14.17inch Loading Container 20GP: 381 cartons * 80 pcs = 30480 pcs40HQ: 884 cartons * 80 pcs = 70720 pcs

Read more less

Overview1. Sensitive for carbon monoxide2. Output voltage boosts along with the concentration of the measured gases increases3. Fast response and recovery4. Adjustable sensitivity5. Signal output indicatorSpecifications1. Power: 2.5V ~ 5.0V2. Dimension: 40.0mm * 21.0mm3. Mounting holes size: 2.0mmApplicationsCarbon monoxide monitorHow to UseIn the case of working with a MCU:1. VCC: 2.5V ~ 5.0V2. GND: Power supply ground3. AOUT: MCU.IO (analog output)4. DOUT: MCU.IO (digital output)Package Contents1. MQ-7 Gas Sensor x12. 4-pin custom connector jumper wire x1Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 5cm * 4cm * 1cm / 1.97inch * 1.57inch * 0.39inch Qty per Carton 4800 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 4800 pcs = 1329600 pcs40HQ: 644 cartons * 4800 pcs = 3091200 pcs

Read more less