Search results for "display module"

1. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, the main frequency is up to 240MHz2. Support 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth5 (LE), onboard antenna3. Built-in 512KB SRAM and 384KB ROM, stacked 8 MB Flash and 8 MB PSRAM4. Onboard 7-inch capacitive touch screen, 800×480 resolution, 65K color5. Support I2C interface to control capacitive touch, 5-point touch, support interrupt6. Onboard CAN, RS485, I2C interface and Micro SD card holder, etc., integrated full-speed USB serial port7. Support flexible clock, module power supply individual setting and other precise control, to achieve multi-scenario low power mode8. Application areas: HMI human-machine interface, LVGL GUI development9. Product size: 192.96 x 110.76mm10. Weight: 291gSpecification: Package Weight One Package Weight 0.39kgs / 0.85lb One Package Size 26cm * 14cm * 4cm / 10.24inch * 5.51inch * 1.57inch Qty per Carton 24 Carton Weight 9.50kgs / 20.94lb Carton Size 28cm * 30cm * 50cm / 11.02inch * 11.81inch * 19.69inch Loading Container 20GP: 634 cartons * 24 pcs = 15216 pcs40HQ: 1473 cartons * 24 pcs = 35352 pcs

Read more less

1. Supports up to 10-point touch; actual touch points depend on the software system2. Tempered glass panel with 6H hardness3. Backlight brightness adjustable via software4. Full-laminated screen for high clarity and dust resistance5. IPS display panel delivers excellent performance with a wide 178° viewing angle6. This product defaults to portrait orientation with a resolution of 480 x 1920 (H x V). Landscape display can be enabled by modifying software settings7. Size: about 24.5 x 6.8cmPackage contents:- 8.8-DSI-TOUCH-A touchscreen x 1- MIPI-DSI-Cable-12cm x 1- MX1.25 2-pin to 2.54mm 3-pin adapter cable x 1- FFC cable 22-pin 200mm (opposite direction) x 2- MX1.25 2-pin to MX1.25 4-pin adapter about 150mm x 1- Screw set x 1Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 28cm * 12cm * 4cm / 11.02inch * 4.72inch * 1.57inch Qty per Carton 36 Carton Weight 12.00kgs / 26.46lb Carton Size 50cm * 38cm * 30cm / 19.69inch * 14.96inch * 11.81inch Loading Container 20GP: 467 cartons * 36 pcs = 16812 pcs40HQ: 1086 cartons * 36 pcs = 39096 pcs

Read more less

1. Equipped with the ESP32-S3-PICO-1-N8R8 high-performance Xtensa 32-bit LX7 dual-core processor, with a main frequency of up to 240 MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with built-in antenna3. Equipped with 512KB SRAM and 384KB ROM, and stacked 8MB Flash and 8MB PSRAM4. Adopting Type-C interface, enhancing the user usage convenience and device compatibility5. Equipped with a 1.43-inch capacitive touch high-definition AMOLED screen, with a resolution of 466 x 466, 16.7M colors, capable of clearly displaying color images6. Using AMOLED screen, featuring higher contrast, wider viewing angle, rich colors, and superior visual effect. It also has the advantages of a slim design, low power consumption, fast response, and high flexibility7. Equipped with the CO5300 driver chip and the CST820 capacitive touch chip, communicating via QSPI and I2C interfaces respectively, without occupying too many interface pin resources8. Equipped with a dual microphone array, capable of implementing audio algorithms such as noise reduction and echo cancellation, suitable for precise voice recognition and near-field/far-field voice wake-up applications9. Equipped with a BOOT custom function side button, facilitating the development of custom functions by using the button10. Equipped with a 3.7V MX1.25 lithium battery charging and discharging interface11. Exports 1 I2C, 1 UART and 1 USB pad, available for external devices and debugging use, allowing flexible configuration of peripheral functions12. Packaging list: ESP32-S3-Touch-AMOLED-1.43C host x 1; silver polyester drawstring x 1Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 8cm * 8cm * 4cm / 3.15inch * 3.15inch * 1.57inch Qty per Carton 215 Carton Weight 19.00kgs / 41.89lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 215 pcs = 88580 pcs40HQ: 958 cartons * 215 pcs = 205970 pcs

Read more less

1. Standard Raspberry Pi connectivity, compatible with and direct-pluggable onto Raspberry Pi 2B/3B/3B+/Zero/Zero W 2. 1x joystick (5-position), 3x pushbuttons, handy and useful 3. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) 4. Driver: ST7735S 5. Interface: SPI 6. Display color: RGB, 65K color 7. Resolution: 128x128 8. Backlight: LED 9. Operating voltage: 3.3VSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 10cm * 8cm * 8cm / 3.94inch * 3.15inch * 3.15inch Qty per Carton 150 Carton Weight 8.60kgs / 18.96lb Carton Size 60cm * 32cm * 32cm / 23.62inch * 12.6inch * 12.6inch Loading Container 20GP: 434 cartons * 150 pcs = 65100 pcs40HQ: 1007 cartons * 150 pcs = 151050 pcs

Read more less

1. IPS screen, 1024x600 hardware resolution, configurable by software (up to 1920x1080)2. Supports popular mini PCs such as Raspberry Pi, BB Black, Banana Pi, as well as general desktop computers3. When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free4. When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free5. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc.6. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.3. 3.5mm audio jack, speaker connector, supports HDMI audio output8. Also supports VGA input (specific cable is required and should be purchased separately)Specification: Package Weight One Package Weight 0.41kgs / 0.89lb One Package Size 22cm * 15cm * 10cm / 8.66inch * 5.91inch * 3.94inch Qty per Carton 16 Carton Weight 5.70kgs / 12.57lb Carton Size 44cm * 30cm * 40cm / 17.32inch * 11.81inch * 15.75inch Loading Container 20GP: 505 cartons * 16 pcs = 8080 pcs40HQ: 1172 cartons * 16 pcs = 18752 pcs

Read more less

1. VCC: 3.3V - 5V power input2. GND: ground wire3. SCL: I2C clock pin4. SDA: I2C data pin5. Communication interface: I2C6. LCD controller: AiP310687. Working voltage: 3.3-5V8. Working temperature: minus 20-70 degrees Celsius9. Display panel: Character LCD10. Display size: 64.5 x 16.0mm11. Characters: 16 x 212. Product size: 87.0 x 32.0 x 13.0mm13. Built-in character LCD panel LCD160214. I2C control interface, only need two signal pins, saving IO resources15. Compatible with 3.3V/5V working voltage16. Comes with online development resources and manuals (Raspberry Pi/Jetson Nano/ESP32/Arduino examples)Specification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 10cm * 4cm * 3cm / 3.94inch * 1.57inch * 1.18inch Qty per Carton 500 Carton Weight 17.00kgs / 37.48lb Carton Size 30cm * 50cm * 56.7cm / 11.81inch * 19.69inch * 22.32inch Loading Container 20GP: 313 cartons * 500 pcs = 156500 pcs40HQ: 727 cartons * 500 pcs = 363500 pcs

Read more less

Product demonstration (Note: OLED is not soldered to T-beam) Features: 1. ESP 32 version: Rev1 2. WiFi 3. Bluetooth 4. 4MB pSRAM 5. 4MB flash memory 6. Three-dimensional antenna product description: 1. Working voltage: 1.8~3.7V 2. Acceptable current: 10~14 mA 3. Transmitting current: 120 mA@+20 dBm 4. 90 mA@+17 dBm 5. 29 mA@+13 dBm 6. Working frequency: 433/470 MHz (433 HMz version) SX1278 /868m/915 m (868 MHz version) SX1276 7. Transmitting power: +20 dBm 8. Receiving sensitivity: -139 dBm@Lora&62.5Khz&SF=12&146 bps -136 dBm@Lora&125 Khz&SF=12&293 bps -118 dBm@Lora&125 Khz&SF=6&9380 bps -123 dBm@FSK&5 Khz&1.2Kbps 9. Frequency error: +/-15 kHz 10. FIFO space: 64 bytes 11. Data rate: 1.2k~300 Kbps@FSK 0.018K~37.5Kbps@Lora 12. Modulation method: FSK, GFSK, MSK, GMSK, Lora TM, OOK 13. Interface form: SPI 14. Sleep current: 0.2uA 15. 1.5uA@Idle 16. Working temperature: -40 degrees Celsius-+85 degrees Celsius 17. Digital RSSI function 18. Automatic frequency correction 19. Automatic gain control 20. Low pressure detection 21. Fast wake-up and frequency hopping 22. Highly configurable packet handler Global Positioning System: 1. GPS module neo-6m, 3V-5V power supply universal 2. The predetermined module with ceramic antenna, super signal 3. Save configuration parameter data EEPROM 4. With data backup battery 5. With LED signal indicator 6. The default baud rate: 9600 power: 1. TP 5400 2. 1A battery management 3. LED indicator: there are 4 LEDs to display the battery status in real time 4. USB 5. CP 2104-GMR 6. Pre-Flash firmware OLED description: 1. Size: 0.96 inches 2. High resolution: 128x64 3. Color: white 4. Viewing angle: >160 degrees 5.Driver IC: SSD 1306 6. Working temperature: -30~80 degrees Celsius 7. Module size (generous): 27.0mm x 27.0mm x 4.1mm 8. Support a variety of control chips: fully compatible with Arduino, 51 series, MSP 430 series, STM 32/2, CSR chips, etc. (a lot of examples are available for reference) 9. Wide voltage support: directly support 3.3V~5V DC power supply without any modification 10. Ultra-low power consumption: 0.04W in normal operation 11. IO port occupies the smallest display: IIC communication, as long as two IO ports Specification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 11cm * 11cm * 3cm / 4.33inch * 4.33inch * 1.18inch Qty per Carton 100 Carton Weight 7.50kgs / 16.53lb Carton Size 57cm * 32cm * 24cm / 22.44inch * 12.6inch * 9.45inch Loading Container 20GP: 609 cartons * 100 pcs = 60900 pcs40HQ: 1414 cartons * 100 pcs = 141400 pcs

Read more less

1. 4-inch/4.3-inch DSI touchscreen with 5-point capacitive touch control2. IPS display panel with a hardware resolution of 480×8003. Full lamination process for clearer image quality4. Toughened glass touch panel with 6H hardness5. DSI interface for LCD driving; refresh rate up to 60Hz6. Supports software-controlled backlight brightness7. Aluminum alloy back casing with a purely passive cooling design8. Default display orientation is portrait; landscape mode can be enabled via software settingsScreen Specifications:1. Resolution: 480 × 800 pixels (H × V)2. Contrast Ratio: 4-inch: 800:1; 4.3-inch: 1000:13. Display Driver IC: ST7701S4. Touch Controller IC: GT9115. Communication Interface: MIPI 2-lane6. Brightness: 4-inch: 350 cd/m2; 4.3-inch: 500 cd/m27. Outline Dimensions: 4-inch: 108.30 × 65.10 mm; 4.3-inch: 116.50 × 68.90 mm8. Display Area: 4-inch: 86.40 × 51.84 mm; 4.3-inch: 93.60 × 56.16 mmSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 12cm * 10cm * 3cm / 4.72inch * 3.94inch * 1.18inch Qty per Carton 120 Carton Weight 15.50kgs / 34.17lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 120 pcs = 62400 pcs40HQ: 1209 cartons * 120 pcs = 145080 pcs

Read more less

1. Input voltage: 6.5-36V (the input voltage is lower than 6.5V, the current accuracy is inaccurate, and the LCD display is abnormal if it is lower than 5.5V)2. Output voltage: 1.2-32V, the default output is 5V step-down type, the output voltage can only be lower than the input voltage, and the voltage difference is more than 2V3. Output current: It can work stably at 3.5A for a long time, and it can reach about 4.5A with fan enhanced heat dissipation (adjustable limit current can reach about 4.2-4.5A)4. Output power: natural heat dissipation 50W (within 3.5A), plus fan to enhance heat dissipation 75W5. Voltage display: resolution 0.05V, range 1.2-32V6. Current display: resolution 0.005A, range 0-4.5A7. Conversion efficiency: about 94%, depending on the voltage difference and current efficiency8. Working current: about 30mA9. Input reverse polarity protection: yes10. Anti-backflow at the output: no (if charging the battery, first power on the module and then connect the battery, and ensure that the battery voltage is lower than the output voltage; if possible, connect an anti-backflow diode in series with the output positive pole)11. Short circuit protection: yes12. Size: about 70.5x48.4x28mm13. Weight: about 65g Features:1. Crystal shell, beautiful design, good touch texture of buttons, and output voltage set by button2. The button can control the output to turn off and on, and can set the power-on default to ON or OFF3. LCD can display input and output voltage, output current and output power4. The input terminal is protected against reverse connection, and the reverse connection will not burn5. High efficiency, high current, low heat generation, constant current value can be adjusted around 0-4.5A, suitable for office power supply, high-power LED constant current drive, lithium battery charging, etc.Function Description:1. There are IN/OUT and ON/OFF buttons on the left side of the module: the IN/OUT button switches the display of input voltage and output voltage, long press to switch the display of output current and output power; the ON/OFF button controls the output ON or OFF, long press Press to set the default output state is ON or OFF at the next power-on2. There are +/- two buttons on the right side of the module: + button press the output voltage to increase 0.05V, long press to continuously increase, and then long press to continuously increase 0.1V, 1V in slow steps; - button press the output voltage Decrease 0.05V, long press to continuously decrease, and then long press to continuously decrease 0.1V, 1V in slow steps3. ADJ-I is the current setting potentiometer. Turn clockwise to increase the set current. When the load current reaches the set current, it enters the constant current state, and the CC constant current indicator (red) lights up. The OUT indicator is the output status indicator, it is on when there is voltage at the output terminal, otherwise it is off; the CHAR indicator is the charging indicator, which is on when charging, and the FULL indicator is the full indicator. If the set constant current value is 2A, charging When the current reaches below 0.2A, turn the light, the FULL indicator is on, and the CHAR indicator is offInstructions:1. Use as an ordinary step-down module with overcurrent protection capability- Press the button to set the output voltage to the desired voltage value- Rotate the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (connect the two test leads directly to the output terminal), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the overcurrent protection value you want to set. (For example, the current value displayed by the multimeter is 2A, then the current can only reach 2A when the module is used, and the red constant current indicator light is on when the current reaches 2A, otherwise the indicator light is off) 2. Use as a battery charger- The module without constant current function cannot be used to charge the battery. Because the voltage difference between the exhausted battery and the charger is very large, the charging current is too large and the battery is damaged, so the battery should be used at the beginning. Constant current charging, when the charging reaches a certain level, it will automatically switch back to constant voltage charging- Determine the float voltage and charging current of the battery to be recharged; (if the lithium battery parameter is 3.7V/2200mAh, then the float voltage is 4.2V, and the charging current can reach 1C, that is, 2200mA)- Under no-load conditions, the output voltage of the button reaches the floating charge voltage; (if charging a 3.7V lithium battery, adjust the output voltage to 4.2V)- First turn the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (just connect the two test leads to the output terminal directly), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the predetermined charging current value- Connect the battery and charge (when setting: no battery is connected to the output terminal)3. Used as a high-power LED constant current driver module- Determine the operating current and operating voltage needed to drive the LED- Under no-load conditions, press the button to set the output voltage to reach the LED working voltage- First turn the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (just connect the two test leads to the output terminal directly), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the predetermined LED operating current- Connect the LED, test the machine (when setting: output no-load, do not connect the LED light) Precautions: 1. It is forbidden to short-circuit the input IN- of the module with the output OUT-, otherwise the constant current function will fail 2. Make sure that the power of the power supply is always greater than the power required by the output load. When the module is seriously hot, please reduce the power usage.Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 10cm * 10cm * 3cm / 3.94inch * 3.94inch * 1.18inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 404 pcs = 71508 pcs40HQ: 412 cartons * 404 pcs = 166448 pcs

Read more less

1. Supports software-controlled backlight brightness2. IPS display panel, excellent display performance, 178-degree viewing angle3. Supports five-point touch; actual touch points depend on the software system4. Tempered glass panel, hardness up to 6H5. Fully laminated screen, high clarity, dustproof6. Default display is portrait mode, resolution is 720 x 1280 (HxV), landscape mode can be configured via software settings7. Supports Raspberry Pi OS, five-point touch; ESP32-P4 supports LVGL custom screen, five-point touch; RK3506 supports Buildroot, Ubuntu, etc., five-point touch; RK3576 supports Buildroot, Debian, Ubuntu, Android, etc., five-point touch8. Note: The version with a case only supports Raspberry Pi 5Standard version:1. 5-DSI-TOUCH-B touchscreen x 12. MIPI-DSI-Cable-12cm x 13. MX1.25 2PIN to 2.54 3PIN cable x 14. FFC cable 22PIN 200mm (reverse direction) x 15. FFC cable 22PIN 100mm (reverse direction) x 16. MX1.25 2PIN to MX1.25 4PIN approx. 150mm x 17. Copper pillar case x 1Casing version packaging:1. 5-DSI-TOUCH-B touchscreen x 12. Black casing x 13. MIPI-DSI-Cable-12cm x 14. MX1.25 2PIN to 2.54 3PIN cable x 15. FFC cable 22PIN 200mm (reverse direction) x 16. 7. FFC cable 22PIN 100mm (reverse direction) x 18. MX1.25 2PIN to MX1.25 4PIN approx. 150mm x 19. DSI-Cable-12cm-C x 110. Silicone button x 111. Copper pillar bag x 112. Screw bag x 1Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 17cm * 11cm * 4cm / 6.69inch * 4.33inch * 1.57inch Qty per Carton 48 Carton Weight 25.10kgs / 55.34lb Carton Size 36cm * 35cm * 34cm / 14.17inch * 13.78inch * 13.39inch Loading Container 20GP: 622 cartons * 48 pcs = 29856 pcs40HQ: 1445 cartons * 48 pcs = 69360 pcs

Read more less

🔥 Turn your Raspberry Pi or mini PC into a real touchscreen workstation.Need a compact screen for a Raspberry Pi project, mini PC or portable setup? This 7-inch HDMI touchscreen gives you a practical display without taking over your desk.😩 THE PROBLEM ❌ A normal monitor is too large for compact projects ❌ Small project screens can be difficult to interact with ❌ You need HDMI connectivity for more than one type of device ❌ You want touch control without a huge setup 💡 THE SOLUTIONA 7-inch 800×480 capacitive touchscreen that can work with Raspberry Pi and compatible mini PCs, and can also function as a general HDMI display.🚀 WHY IT'S USEFUL🖥️ Compact 7-inch ScreenLarge enough for dashboards, controls, media and project interfaces while remaining compact.👆 Capacitive TouchTouch interaction makes compatible projects easier to control without relying entirely on a mouse or keyboard.🔌 HDMI ConnectivityUse it as an HDMI display with compatible computers and devices.🥧 Great for Raspberry Pi ProjectsDesigned to support popular Raspberry Pi setups and other mini-PC platforms.💻 Windows Monitor UseWhen used as a computer monitor, it supports compatible Windows versions with touch functionality.⚡ HOW IT SOLVES THE PROBLEMBuilding a compact computer? Add a screen without needing a full-size monitor.Need touch control? Use capacitive touch on supported systems.Working on a Raspberry Pi project? Connect the display to compatible Raspberry Pi configurations.Need a portable second display? Its compact size makes it useful for portable projects and workstations.⭐ PERFECT FOR ✔ Raspberry Pi users ✔ DIY electronics projects ✔ Mini-PC builds ✔ Developers and makers ✔ Home automation dashboards ✔ Portable computer projects ✔ Digital signage and control panels 📋 KEY SPECIFICATIONS 7-inch display 800×480 resolution Capacitive touch HDMI interface Raspberry Pi compatible Supports popular mini-PC platforms Can function as a general HDMI monitor ⚠️ IMPORTANTSome Raspberry Pi and mini-PC configurations require additional cables or drivers. Please check your exact device and connection requirements before ordering.💬 Not sure which cable or setup you need? Send us your device model and we'll help you check.

Read more less

1. Display size: 160.0 x 96.0 mm2. Dimensions: 154.0 x 214.0 x 32 mm3. Screen pixel pitch: 0.2 x 0.2 mm4. Screen resolution: 800 x 4805. Display colors: black, white, green, blue, red, yellow6. Grayscale levels: 27. Refresh time: 12s8. Sleep current: 1mA9. Charging voltage/operating voltage: 5V10. Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor with a main frequency of up to 240MHz11. Supports 2.4GHz Wi-Fi and Bluetooth 5 (LE), with an onboard internal antenna12. Built-in 512KB SRAM and 384KB ROM, integrated with 16MB Flash and 8MB PSRAM13. Onboard audio codec chip, supporting voice acquisition and playback, facilitating AI voice interaction applications14. The screen uses E Ink Spectra 6 (E6) technology, supporting high-contrast and high-saturation color display effects15. Six primary colors use dithering technology to produce full-color images; overall power consumption is very low, consuming power only during refresh16. Large-capacity lithium battery with power-saving circuit; one charge can provide thousands of refreshes (without external high-power devices such as speakers)17. Onboard PCF85063 RTC real-time clock and SHTC3 temperature and humidity sensor for accurate RTC time management and temperature and humidity monitoring18. Simple solid wood photo frame, elegant and beautiful19. Rotating stand and hook for unrestricted use scenarios20. Open source code, freely customizable functions21. An e-paper AloT photo frame with an onboard ESP32-S3 microcontroller, supporting Wi-Fi and BLE dual-mode communication22. Equipped with a 7.3-inch e-paper screen, extremely low power consumption, suitable for portable devices and long-battery-life scenarios23. Integrated with RTC real-time clock, SHTC3 temperature and humidity sensor, microSD card slot, low-power audio codec chip circuit, and lithium battery charging and discharging management circuit.24. Onboard audio decoding chip, supporting high-quality audio processing, providing clear and high-quality audio input and output.25. Supports AI and can connect to online large language model platforms.26. Features a high-quality solid wood frame and a versatile white inner lining, offering a simple yet stylish design.Specification: Package Weight One Package Weight 0.60kgs / 1.33lb One Package Size 18cm * 24cm * 6cm / 7.09inch * 9.45inch * 2.36inch Qty per Carton 20 Carton Weight 13.10kgs / 28.88lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 20 pcs = 8760 pcs40HQ: 1018 cartons * 20 pcs = 20360 pcs

Read more less