Search results for "Battery Testing Cable Adapter"

1. Easy to plug the battery in, and start to charge2. Mini size, portable and easy to carry3. Charges via any Micro USB cable from Computer Laptop or AC wall adapter4. Micro-USB compatible, only for LG phones5. With indicator lightSpecification: General Compatible with LG: G5 Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 5cm * 3cm / 3.94inch * 1.97inch * 1.18inch Qty per Carton 400 Carton Weight 21.00kgs / 46.30lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 400 pcs = 152400 pcs40HQ: 885 cartons * 400 pcs = 354000 pcs

Read more less

1. Applicable batteries: all 12V lead-acid batteries2. Input voltage: 6V~25V3. Power consumption: 2.3 ma (average)4. RF: 33MHz5. Display: 9 LED indicators6. Protection: short circuit and overcurrent protection7. Lithium battery capacity: 750mAh8. Charging input: Solar panel type C port (5V)9. Monitor: Monochrome LCD screen with backlight10. Real-time display of battery health value, temperature, charging and voltage11. Battery starting system and charging system monitoring12. Data abnormality alarm to remind you of battery status in time13. It is powered by solar panels and has a Type-C charging interface. It consumes very little power and can be used for a week on a single charge.14. 433MHz precise transmission, real-time monitoring of battery status15. Intelligent vibration sensing, smart screen off and on, automatic switch, low power consumption16. Suitable for all 12V starting batteries, widely used in cars, trucks, yachts, and motorcyclesSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 14cm * 10cm * 6cm / 5.51inch * 3.94inch * 2.36inch Qty per Carton 45 Carton Weight 10.10kgs / 22.27lb Carton Size 44cm * 32cm * 32cm / 17.32inch * 12.6inch * 12.6inch Loading Container 20GP: 591 cartons * 45 pcs = 26595 pcs40HQ: 1373 cartons * 45 pcs = 61785 pcs

Read more less

1. Working voltage range: 5.0V-36V2. Balance port 1 string input voltage range: 0.8V-15V3. Balance port 2-8 series input voltage range: 0.8V-4.8V4. Support battery string number: 1-8S5. Voltage measurement accuracy: 0.005V @4.2V6. Cell balance accuracy: 0.005V7. Support USB charging: QC 2.0/3.0 BC1.2, 12/2A (MAX)8. Support smart battery: set charging and anti-power parameters, query battery information and usage9. Supported battery types:- LiHv (1-8S)/LiPo (1-8S)/LiFe (1-8S)- Lilon (1-8S)/NiMH/Cd (1-10S)10. Display type: 2.4 inches 320x240 260,000 colors IPS LCD11. Visible 260,000 color display under strong sunlight12. The exquisite and powerful BG-8S intelligent battery tester fully supports BattGO technology13. With BattGO technology, you can fully understand the detailed parameters of the battery just by connecting to XT60i14. Easy to read battery voltage, battery cycle, working parameters and set up quickly15. Automatically balance the battery voltage, advanced automatic balance algorithm, to ensure the balance of each cell, automatically enter the low power consumption mode after completion16. Powerful portable charging function, connect to your battery, BG-8S can be a power bank for your mobile devices17. Support Qualcomm QC 2.0/3.0, compatible with BC1.2 and for Apple devices18. Receiver signal test and protocol analysis, BG-8S uses a standard 3-pin plug to detect BEC output voltage19. BG-8S also supports multiple protocol analysis, including PWM, PPM&S.BUS, etc. Future firmware upgrades will support more protocol analysis20. Support XT60/XT60i, XH2.54 1-8s balanced leads, XH2.54 3-pin, JST ETC measuring voltage21. Support LiHv, LiPo, Lilon, LiFe, NiMh/Cd battery and BEC output measurement22. Support USB upgrade, multi-language selection23. BG-8S has a Micro USB port, which can be easily connected to a PC for firmware upgrades24. The XT60i is designed for BattGo25. BG-8S adopts the XT60i connector jointly developed by ISDT and Amass, supports BattGO technology, and is highly compatible with the original XT60 plug26. Dimensions: 80x55x19mm27. Weight: 59 gramsSpecification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 11cm * 10cm * 5cm / 4.33inch * 3.94inch * 1.97inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

1. Voltage: DC 4V-30V (overvoltage protection can be set).2. Current: 0-5.5A (overcurrent protection can be set).3. Power: 0-150W4. Electricity: 0-99999mAh5. Energy: 0-999.9mWh6. Time: 0-99 hours7. Countdown: 0-24 hours8. Load resistance: 0-999.99Ohm9. Current / temperature10. Data output voltage11. Supply voltageSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 14.5cm * 9.5cm * 1.5cm / 5.71inch * 3.74inch * 0.59inch Qty per Carton 500 Carton Weight 14.00kgs / 30.86lb Carton Size 90cm * 75cm * 15cm / 35.43inch * 29.53inch * 5.91inch Loading Container 20GP: 263 cartons * 500 pcs = 131500 pcs40HQ: 611 cartons * 500 pcs = 305500 pcs

Read more less

Features:1. The BT-705 Battery Analyzer is designed specifically for testing 6V and 12V conventional flooded batteries, AGM flat batteries, AGM spiral batteries and gel batteries as well as 12V and 24V starting and charging systems.2. The BT-705 provides technicians with a fast, simple and affordable solution for checking battery health and detecting faults in starting and charging systems.3. Multiple vehicle applications - passenger cars and trucks4. Tests batteries rated from 100 to 2000CCA5. Tests multiple battery types - conventional flooded, AGM flat plate, AGM spiral and gel6. Tests multiple rating systems - CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB7. Tests batteries directly on the vehicle - no need to disassemble the battery8. Detects bad batteries9. Quick and accurate display of test results in just 3 seconds10. Tests 12V and 24V charging systems11. Advanced starter/alternator testing12. Fast starter analysis without disabling the ignition13. No light, heat or sparking, and no discharge - safe operation for all levels of users14. Automatic temperature compensation15. Ripple voltage test for easy and intuitive fault checking16. Equipped with a large backlit LCD Display and menu-driven operation, extremely easy to use17. Optional Bluetooth printerProduct parameters:1. Display: 2.8-inch LCD screen, 128 x 64 pixels2. Supported languages: English/French/German/Spanish/Dutch/Russian/Italian3. Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)4. Storage temperature: -20 to 70 degrees Celsius (-4 to 158 degrees Fahrenheit)5. Dimensions: 190 x 90 x 36mm6. Weight: 325 gramsPacking list:BT-705 Battery Analyzer x 1Instruction manual x 1Storage box x 1Specification: Package Weight One Package Weight 1.36kgs / 3.01lb One Package Size 24cm * 34cm * 9cm / 9.45inch * 13.39inch * 3.54inch Qty per Carton 8 Carton Weight 7.10kgs / 15.65lb Carton Size 50cm * 36cm * 38cm / 19.69inch * 14.17inch * 14.96inch Loading Container 20GP: 389 cartons * 8 pcs = 3112 pcs40HQ: 905 cartons * 8 pcs = 7240 pcs

Read more less

1. Scope of use: all car lead-acid starter batteries, including ordinary full liquid, EFB, AGM flat battery, AGM wound battery, GEL battery, etc. 2. Suitable for: car factories, garages, car battery manufacturers, car battery agents, educational institutions, DIY enthusiasts, etc. 3. Test range: CCA100-2000, 30-200Ah 4. Test results: SOH, SOC, CCA value, IR, start-up and charging system, etc. 5. Test standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB 6. Voltage measurement range: 7-30VDC 7. Working temperature: -20 degrees to 50 degrees 8. Power: 2W-5W 9. Voltage: 2-30V 10. Housing material: ABSSpecification: Package Weight One Package Weight 0.37kgs / 0.82lb One Package Size 12cm * 6cm * 5cm / 4.72inch * 2.36inch * 1.97inch Qty per Carton 80 Carton Weight 25.90kgs / 57.10lb Carton Size 38cm * 32cm * 28cm / 14.96inch * 12.6inch * 11.02inch Loading Container 20GP: 783 cartons * 80 pcs = 62640 pcs40HQ: 1818 cartons * 80 pcs = 145440 pcs

Read more less

1. Module parameters:- Power supply voltage: DC4.5-6V (micro USB interface)- Working current: no more than 70mA- Discharge voltage: 1.00V-15.00V Resolution 0.01V- End voltage range: 0.5-11.0V- Support through current: no more than 3.000A resolution 0.001A- Voltage measurement error: less than 1% + 0.02V- Current measurement error: less than 1.2% +-0.002A- Battery capacity range: 9999Ah (1Ah = 1000mAh) 2.2. When the value is large, it is switched by decimal point shift. When it is less than 10Ah, it will be displayed as X.XXX, when it reaches more than 10Ah, it will be displayed as XX.XX, and so on.3. Circuit board size: 50mmX37mm4. Finished product size: 50mmX37mmX17mm (Length X Width X Height, including copper foot height)5. Weight of board and accessories: single board 28g (including copper pillar), two 5W ceramic resistors 9g, 50W resistor about 27g (including wire)6. Note: In order to improve the voltage measurement accuracy, this circuit is specially designed with DC bias. When the terminal is connected nothing, a small voltage will be displayed, which does not affect the actual measurement. 0V) will display 0. If you want to understand the principle, you can check the superposition theorem in electrical engineering.7. How to use:- The battery under test should be fully charged first.- Connect the positive pole of the battery under test to the input positive pole, and the negative pole to the negative pole of the input. Connect the load to the output positive pole and the output negative pole, and connect the tester micro USB with working power (not available for desktop or notebook USB power supply). The battery voltage is displayed at this time.- To start the test directly, just press the “OK” button, the tester can automatically formulate a suitable termination voltage according to the full charge voltage of the battery, and will flash the display 3 times to start the test. Need to manually set the termination voltage, just press the "+" or "-" button to modify in the battery voltage display state, the termination voltage is displayed at the beginning of P, the back represents the voltage value, the resolution is 0.1V, after setting, press "OK" "start testing.- After the test starts, the tester will turn on the electronic switch that controls the load. The test process data display will be displayed between the discharge capacity (Ah), the current discharge current (A) and the battery voltage (V). When the battery voltage reaches the set termination voltage, the tester cuts off the load control switch, the display data stays above the capacity (Ah) and flashes quickly with the corresponding indicator light, the displayed capacity is the actual discharge capacity of the battery, press it "OK" can stop the flashing and let the data display stably. Press the "OK" button again to restore to the state of just powering up and replace the battery to test the next section ...8. Error code and meaning:- Err1: The battery voltage is higher than 15V- Err2: The battery voltage is lower than the set termination voltage- Err3: The battery cannot bear the load discharge current or the line internal resistance is too large- Err4: Current is too large (current exceeds 3.1A)- Err5: Improper use or wiring error has caused the device to burn down and cannot be used (current sampling or control switch MOS burned)9. Note: If the battery is reversed, when the load is turned on and the load current is large (about> 0.8A), the circuit switch tube may be damaged!10. Secondary calibration operation: Press and hold three buttons to power on the tester at the same time, enter the calibration mode, first display the number of calibration records, then enter the formal calibration sampling program to display 0u0A, then short-circuit the input positive and negative poles and press "OK "Button to complete displaying J10u, apply a standard DC voltage of 10.00V between the input positive and negative electrodes, press the" OK "button, and then display J2.0A, apply to the output negative electrode (inflow direction) and input negative electrode (outflow direction) After a constant DC current of 2.0A, press the "OK" button once to complete the calibration. The tester will pre-check the calibration data. If the calibration data is reliable, it will display 4 calibration numbers in turn and then exit. If the pre-audit believes that the data is not reliable, discard the data and exit.Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 500 Carton Weight 23.00kgs / 50.71lb Carton Size 50cm * 50cm * 46cm / 19.69inch * 19.69inch * 18.11inch Loading Container 20GP: 231 cartons * 500 pcs = 115500 pcs40HQ: 538 cartons * 500 pcs = 269000 pcs

Read more less

1. Test object: 12V battery 2. Voltage range: 4V-20V 3. With LCD display and LED indication 4. Accurate: Four-character luminous digital display is adopted, which is easy to read accurately. 5. LED indication: Colored LEDs indicate different states of the battery or alternator. 6. Safety protection: reverse polarity, short circuit and overload protection 7. Alligator clip with 30Amp 8. Product net weight: 126 G 9. Box size: 14.5 x 4.5 x 9CM Specification: Package Weight One Package Weight 0.14kgs / 0.30lb One Package Size 15cm * 9cm * 5cm / 5.91inch * 3.54inch * 1.97inch Qty per Carton 224 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 224 pcs = 39648 pcs40HQ: 412 cartons * 224 pcs = 92288 pcs

Read more less

1. Real-time monitoring, smart chip, precision fine-tuning, reverse connection protection2. Pluggable power connector, RW1 adjustable potentiometer3. Applicable to various instruments, mobile convenient equipment, medical equipment, electric vehicles, balance vehicles, unicycles, ternary lithium batteries, lead-acid batteries, iron-lithium battery packs, etc.4. Stable and reliable, fast recognition, sensitive response5. Reverse connection does not burn, safe and reliable6. The LCD display works, you can set the type of battery you need to measure7. Power display, voltage display, power display, temperature display8. Working current: less than or equal to 15mA9. Working air pressure: 80-106 kPa10. Ambient temperature: -10 to 70 degrees Celsius11. Measuring range: 8-100v12. Measurement speed: about 2 seconds/time13. Display mode: LCD screen14. Installation size: 58 x 28mm15. Dimensions: 61x33x14.5mm16. Weight: about 21gSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 5cm * 3cm / 3.94inch * 1.97inch * 1.18inch Qty per Carton 500 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs40HQ: 562 cartons * 500 pcs = 281000 pcs

Read more less

feature:1. With the help of STM32 chipset hardware, a fast and smooth running speed is realized.2. Make sure the battery status is (OK) or (Replace).3. Check the battery capacity-cold start current (CCA), DIN, EN and IEC information about the battery rating.4. Check the internal resistance value (m).5. Display life (percentage).6. Battery start test, load test, battery charging test, ripple test.7. Graphical voltage real-time monitoring.8. Storage and review of test results.9. Print the test results and battery report on the PC.10. Support languages: English, Japanese, French, German, Russian, Dutch, Spanish, Portuguese, Polish, Italian.11. Application: used to test various 12V batteries (start (SLI), deep cycle and marine) wet (water injection), VRLA or maintenance-free (MF), sealed maintenance-free (SMF), absorbent glass mat (AGM) , EFB and gel cells.12. Support the main battery standards CA, CCA, BCL, MCA, JIS, SAE, EN, GB, DIN and IEC. 13. Measurement standards:CCA: 100-2000.BCI: 100-2000.CA: 100-2000.MCA: 100-2000.JIS: 26A17-24SH52.DIN: 100-1400.IEC: 100-1400.EN: 100-2000.SAE: 100-2000.GB: 100-1400.14. Specifications:Display: color TFT LCD screen.System voltage: 12 volts.Input voltage range: 8V-16VPower requirements: No built-in battery is required.Turn on the power after turning on the power during the test.15. Shipping list:KW210 battery tester unit x1 USB cable for upgrading and printing x1Box x1User manual x1Nylon protective sleeveSpecification: General Certificate CE Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 19cm * 16cm * 6cm / 7.48inch * 6.3inch * 2.36inch Qty per Carton 20 Carton Weight 9.00kgs / 19.84lb Carton Size 40cm * 34cm * 32cm / 15.75inch * 13.39inch * 12.6inch Loading Container 20GP: 612 cartons * 20 pcs = 12240 pcs40HQ: 1422 cartons * 20 pcs = 28440 pcs

Read more less

Features:1. Large LCD, easy-to-read 3.5-inch high-definition display.2. Durable protective shell can prevent impact, friction and collision.3. Non-contact AC voltage detection, top sensor probe design, more securely identify AC voltage.4. The high-resolution large screen can display 3 test results on the screen, including voltage, frequency, and analog bars.parameter:1. Dimensions: 143.4 x 70.9 x 15.7mm2. Display: 9999 times3. Screen: 3.5 inches4. Resolution: 0.11ohms5. S10 power supply: 1.5V (AAA) x 2 (not included)6. S11 power supply: 800 mA lithium battery7. Diode: automatically recognize the diode when it is lower than 3.0V8. DC voltage: 0.8V-620V +/-(0.5%+3), resolution: 0.001V9. AC voltage: 2.2V-620V +/-(0.5%+5), resolution: 0.001V10. Resistance: 1Ω-999.9ohms +/-(2.0%+5), 1kohms-60Mohms +/-(1.0%+3)11. V-Alert (non-contact voltage detection): buzzer alarm sound，on-site inspection: alarm buzzer, LCD screen display stripes12. Continuity: If the resistance is less than 30ohms, the buzzer will sound13. Frequency:- 1Hz-1000Hz +/-(1.0%+5) (ACV:2V-10V); resolution: 0.001Hz- 1KHz-60KHz +/-(1.0%+5) (ACV:10V-620V); resolution: 0.001HzPacking list:S10:S10 Multimeter x 1Test cable x 1Manual x1S11:S11 Multimeter x 1Test cable x 1Type-C charging cable x 1EVA cloth bag x 1Protective shell x 1Manual x1Note: The actual product is subject to the title model, the model machine of the picture is only for effect referenceSpecification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 17cm * 10cm * 4.5cm / 6.69inch * 3.94inch * 1.77inch Qty per Carton 80 Carton Weight 28.00kgs / 61.73lb Carton Size 47cm * 42cm * 35cm / 18.5inch * 16.54inch * 13.78inch Loading Container 20GP: 385 cartons * 80 pcs = 30800 pcs40HQ: 896 cartons * 80 pcs = 71680 pcs

Read more less

Features1. Monitoring the battery power percentage by this mini tester. 2. Easy to read the value in dark environment with the backlight. 3. Suitable for testing 12V/24V/36V/48V lead acid battery, ternary lithium battery, polymer lithium-ion battery, 3-15 series lithium-ion battery, storage battery, water battery, etc.. 4. Designed to test the voltage, current and capacity of battery, and display them with intuitive battery symbol and percentage. Users can know the state of battery in time. 5. Widely used for cars, motorcycles, scooters, bikes, power bank, test equipment, etc.1. Work voltage: 5-70V 2. Work current: 3-6mA 3. Display: HTN LCD with backlit 4. Suitable for: 3-15 x 3.7V Lithium Batteries; Lead Acid Batteries 12V, 24V, 36V, 48V 5. Dimensions: 43.3 x 23.6mm 6. Mounting hole Size: 40.8 x 20.8mm 7. Wire Length: 30cmSpecification: Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 12cm * 6cm * 2cm / 4.72inch * 2.36inch * 0.79inch Qty per Carton 400 Carton Weight 13.60kgs / 29.98lb Carton Size 50cm * 42cm * 32cm / 19.69inch * 16.54inch * 12.6inch Loading Container 20GP: 396 cartons * 400 pcs = 158400 pcs40HQ: 921 cartons * 400 pcs = 368400 pcs

Read more less