Search results for "breadboard"

Product Introduction:This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and I/O connectivity.Product features:1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz.2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz.3. Equipped with an ESP32-C6 WIFI/BT coprocessor, extending WIFI 6/Bluetooth 5 and other functions via SDIO.4. Resolution: 1024x6005. Communication Interface: Supports RGB565, RGB666, RGB8886. Display panel: IPS7. Touch type: capacitive8. Touch chip: GT9119. Brightness: 350cd/m210. Contrast ratio: 600:111. Viewing angle: 160 degrees12. Dimensions: 99.17x164.28mm13. Display size: 86.42x154.58mm14. Display colors: 16.7M colorsMemory:1. 128 KB high-performance (HP) system read-only memory (ROM)2. 16 KB low-power (LP) system read-only memory (ROM)3. 768 KB high-performance (HP) L2 memory (L2MEM)4. 32 KB low-power (LP) SRAM5. 8 KB system tightly coupled memory (TCM)6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interfacePeripheral Interfaces:1. Onboard Type-C USB 2.0 OTG interface, SDIO 3.0 SD card slot, Type-C UART programming port for convenient use in different scenarios.2. Onboard speaker interface and microphone, allowing for ideal audio functionality using codec and power amplifier chips.3. Onboard MIPI-CSI high-definition camera interface, supporting full HD 1080P image acquisition and encoding, integrated image signal processor (ISP), H264 video encoder, supporting H.264 & JPEG video encoding (1080P @30fps), suitable for applications in computer vision, machine vision, etc.4. Onboard MIPI-DSI high-definition display interface, integrated pixel processing accelerator (PPA), 2D graphics acceleration controller (2D DMA), supporting JPEG image decoding (1080P). At 30fps, it provides strong support for high-definition display and a smooth HMI experience, making it suitable for applications such as smart home control panels, industrial control panels, and automatic vending machines.Specification: Package Weight One Package Weight 0.47kgs / 1.03lb One Package Size 19cm * 12cm * 4cm / 7.48inch * 4.72inch * 1.57inch Qty per Carton 48 Carton Weight 23.30kgs / 51.37lb Carton Size 40cm * 38cm * 34cm / 15.75inch * 14.96inch * 13.39inch Loading Container 20GP: 515 cartons * 48 pcs = 24720 pcs40HQ: 1197 cartons * 48 pcs = 57456 pcs

Read more less

1. Material: resin, PU2. Net weight: 30g3. Size: 1:1 simulation, length: 15cm, width: 9cm, thickness: 5cm;4. Shape: bread5. Uses: suitable for home decoration, model room display, restaurant display, bakery display, outdoor display, studio sketching, teaching aids, shooting props, hotels, bars, cafes, shopping malls, etc.Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 16cm * 10cm * 6cm / 6.3inch * 3.94inch * 2.36inch Qty per Carton 500 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs40HQ: 562 cartons * 500 pcs = 281000 pcs

Read more less

1. Equipped with the high-performance Xtensa 32-bit LX7 dual-core processor of ESP32-S3R8, with a main frequency of up to 240 MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with built-in antenna3. Equipped with 512KB of SRAM and 384KB of ROM, and stacked 8MB PSRAM and externally connected 16MB Flash4. Uses Type-C interface, eliminating the need to worry about the front or back insertion, improving the users convenience and device compatibility5. Equipped with a 1.54-inch LCD screen, 240 x 240 resolution, 262K color, capable of clearly displaying color images6. Equipped with ES7210 audio encoding chip, supporting dual-microphone audio acquisition and echo cancellation function7. Equipped with ES8311 audio codec chip, NS4150B power amplifier chip, microphone and speaker, enabling smooth gaming with Xiaozhi AI8. Equipped with QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), capable of detecting motion posture to expand applications9. Exposed I2C, UART and other pads, available for external devices and debugging use, flexible configuration of peripheral functions10. Equipped with 3 customizable function buttons, capable of achieving single-click, double-click, long press and other operations11. Equipped with 3.7V MX1.25 lithium battery charging and discharging interface12. Equipped with Micro SD card slot, enabling storage expansion, high-speed data transmission, improving flexibility of use, suitable for data recording and media playback, simplifying circuit designLCD screen parameters1. Display panel: IPS2. Display resolution: 240 x 240 pixels3. Display size: 1.54 inches4. Communication interface: 4-Wire SPI5. Touch type: capacitive sensing6. Display colors: 262K9. Driving IC: ST778910. Touch IC: CST81611. Effective screen size: about 2.772 x 2.772 cmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 126 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 126 pcs = 56700 pcs40HQ: 1045 cartons * 126 pcs = 131670 pcs

Read more less

1. Features an Armv8-M STAR-MC1 MCU with a clock speed of up to 480 MHz2. Supports 2.4 GHz Wi-Fi (802.11 b/g/n/ax) and Bluetooth 5.4 (Bluetooth LE), with an onboard antenna3. Features 640 KB of SRAM and 64 KB of ROM, with 16 MB of PSRAM in a stacked package and 8 MB of external Flash4. On-board 1.75-inch capacitive touch HD AMOLED display with 466 x 466 resolution and 16.7 million colors, capable of clearly displaying color images5. Built-in CO5300 driver chip and CST9217 capacitive touch chip, communicating via QSPI and I2C interfaces respectively, without occupying excessive interface pin resources6. Features a Type-C interface, enhancing user convenience and device compatibility7. On-board QMI8658 six-axis inertial measurement unit (3-axis accelerometer, 3-axis gyroscope), capable of detecting motion posture, step counting, and other functions8. On-board PCF85063 RTC chip, providing precise timekeeping and automatic leap year handling9. On-board PWR and KEY side buttons with customizable functions, facilitating the development of custom button features10. On-board 3.7V MX1.25 lithium battery charging and discharging interface11. On-board 8-pin 2.54mm pitch female header, exposing 5 GPIO pins and reserving 5 IO pads for external devices and debugging, enabling flexible configuration of peripheral functions12. On-board Micro SD card slot for flexible storage expansion and fast data transfer, suitable for data logging and media playback, simplifying circuit design13. Features an AMOLED display with higher contrast, wider viewing angles, rich colors, and fast response times for superior visual performance, while offering advantages such as a slim design, low power consumption, and flexibilityDisplay specifications1. Display panel: AMOLED2. Display size: 1.75 inches3. Display resolution: 466 x 466 pixels4. Display colors: 16.7M5. Display brightness: 700 cd/square meter6. Contrast ratio: 100,000:17. Communication interface: QSPI8. Driver IC: CO53009. Touch: supported10. Touch IC: CST9217Standard packaging list:- T5-E1-Touch-AMOLED-1.75 x 1- 8-ohm 2W speaker x 1GPS packaging list:- T5-E1-Touch-AMOLED-1.75-G (with GPS) x 1- 8-ohm 2W speaker x 1- GNSS ceramic antenna x 1Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 10cm * 8cm * 4cm / 3.94inch * 3.15inch * 1.57inch Qty per Carton 160 Carton Weight 18.00kgs / 39.68lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 160 pcs = 70080 pcs40HQ: 1018 cartons * 160 pcs = 162880 pcs

Read more less

1. No backlight, keeps displaying last content for a long time even when power down2. Ultra low power consumption, basically power is only required for refreshing3. Comes with online development resources and manual (driver board schematic diagram and examples for Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32, etc.)Optional for e-Paper driver board:1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi and Jetson Nano series boards2. Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi3. Adapting SPI interface for connecting with controller boards like Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32, etc.4. Onboard voltage translator, compatible with 3.3V / 5V MCUsSpecifications:1. Operating voltage: Raw display: 3.3V3.3V；with driver board: 3.3V / 5V2. Display colors: Red, yellow, black, white3. Communication interface: 3-wire SPI, 4-wire SPI4. Grayscale levels: 25. Dimensions: Raw display: 105.33 × 62.37 × 0.91 mm; with driver board: 107.00 × 64.00 mm6. Full refresh time: 20s7. Display area: 92.80 × 55.68 mm8. Refresh power consumption: Less than 90mW9. Dot pitch: 0.116 × 0.116 mm10. Sleep current: Less than 0.01μA (near zero)11. Resolution: 800 × 480 pixels12. Viewing angle: Greater than 170-Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 14cm * 10cm * 3cm / 5.51inch * 3.94inch * 1.18inch Qty per Carton 128 Carton Weight 11.30kgs / 24.91lb Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch Loading Container 20GP: 461 cartons * 128 pcs = 59008 pcs40HQ: 1071 cartons * 128 pcs = 137088 pcs

Read more less

1. Based on the high-performance ESP32-S3R8 chip, featuring an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240 MHz 2. Integrates 512 KB of SRAM and 384 KB of ROM, with 8 MB of PSRAM and 16 MB of Flash 3. Supports 2.4GHz Wi-Fi and Bluetooth 5 (LE), with a built-in antenna and support for external antennas4. On-board W5500 Ethernet chip, providing 10/100Mbps network connectivity via the SPI interface5. Supports an external PoE module for Power over Ethernet (compliant with the IEEE 802.3af standard) 6. On-board camera interface supporting mainstream cameras such as the OV5640, suitable for image and video capture7. On-board USB Type-C port supporting power delivery, debugging, and firmware downloads for more convenient development8. On-board Micro SD card slot supporting external SD cards for storing images and files9. On-board Pico-compatible interface providing extensive peripheral expansion options with strong compatibility10. Dimensions: Approximately 7.28 x 2.1 cmOV5640 Camera Specifications:1. Sensor size: 1/4 inch 2. Focal length: 4.1 mm 3. Aperture: f/2.8 4. Field of View: 68 degrees (D) x 55 degrees (H) x 42 degrees (V) 5. Maximum Resolution: 2592 x 1944 6. Output Interface: DVP 7. Output Formats: RGB565, YUV/YCbCr422Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 11cm * 7cm * 3cm / 4.33inch * 2.76inch * 1.18inch Qty per Carton 200 Carton Weight 8.50kgs / 18.74lb Carton Size 37cm * 30cm * 24cm / 14.57inch * 11.81inch * 9.45inch Loading Container 20GP: 1001 cartons * 200 pcs = 200200 pcs40HQ: 2323 cartons * 200 pcs = 464600 pcs

Read more less

Features1. The potentiometer adjusts the volume with a switch for easy control of the volume, making it good for DIY speakers.If it is a metal box, you need to bring out the Bluetooth antenna. 2. The copper DC connector is used to withstand high current and no heat. 3. Capacitor 470uf35V solid capacitors ensure power storage and heat dissipation, and stable power supply is a prerequisite for good sound quality. 4. Free DC head lead, compatible with the input power interface of this product, even if you do not have a DC head adapter or battery, it can be easily wired. 5. Bluetooth 5.0 version, the transmission efficiency is higher, the transmission distance is farther. Precautions for use: The power switch on the board is the standby switch. After the switch is turned off, the machine is in a low-power standby state. To completely turn off the power or unplug the DC plug on the machine for a long time.Specification1. Material: ABS plastic 2. Bluetooth version: 5.0 3. Adaptation supply voltage: 5-24V(optional 9/12/15/18/24V adapter, high power recommended high voltage) 4. Adapter speaker: 30-200W, 4 ohms - 8 ohms 5. Number of channels: Left and right stereo(stereo) 6. Bluetooth transmission distance: 15m(without occlusion) 7. Protection mechanism: Self-recovery overheat protection, self-recovery short circuit protection 8. Size: 55 x 38 x 17mm Tip: To have enough out put power if the input is sufficient and the supply voltage/current is sufficient. The power supply voltage is higher and the relative power will be larger. The speakers with different impedances will have different output power. In the case of sufficient voltage and current, the larger the ohms of the horn, the smaller the relative sound powre. Please pay attention! Power supply voltage: 12V--8 ohm speaker/12W(left channel) + 12W(right channel), 4 ohm speaker/20W + 20W 15V--8 ohms/18 + 18W, 4 ohms/greater than 30 + 30W 19V--8 ohms/32 + 32W, 4 ohms/greater than 45 + 45W 24V--8 ohms/38 + 38W, 4 ohms/greater than 50 + 50WSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 13cm * 6cm * 3cm / 5.12inch * 2.36inch * 1.18inch Qty per Carton 200 Carton Weight 14.80kgs / 32.63lb Carton Size 32cm * 32cm * 53cm / 12.6inch * 12.6inch * 20.87inch Loading Container 20GP: 491 cartons * 200 pcs = 98200 pcs40HQ: 1140 cartons * 200 pcs = 228000 pcs

Read more less

1. This product is a high-performance, highly integrated microcontroller development board independently designed by Waveshare. Within its compact form factor, it integrates peripherals including a 3.5-inch capacitive HD IPS display, highly integrated power management IC, low-power audio codec, camera interface, 6-axis IMU (3-axis accelerometer + 3-axis gyroscope), RTC, and Micro SD card slot, facilitating development and product integration. 2. Features Raspberry Pi-designed RP2350B microcontroller chip 3. Unique dual-core/dual-architecture: Dual ARM Cortex-M33 cores + dual Hazard3 RISC-V cores, both operating at up to 150MHz, enabling flexible architecture switching 4. Built-in 520KB SRAM and 16MB on-chip Flash 5. Type-C interface eliminates orientation concerns 6. Onboard 3.5-inch capacitive touch HD IPS screen with 320 × 480 resolution and 65K colors for clear image display 7. Integrated ST7796 display driver and FT6336 capacitive touch controller using SPI and I2C interfaces respectively, minimizing pin consumption 8. Camera interface compatible with mainstream modules (e.g., OV2640, OV5640) for image/video capture 9. Onboard 3.7V MX1.25 lithium battery charge/discharge interface 10. USB 1.1 host/device support 11. Low-power sleep/hibernation modes 12. Programmable via drag-and-drop when recognized as USB mass storage 13. 22 multifunctional GPIO pins: 2×SPI, 2×I2C, 2×UART, 7×12-bit ADC, 18×PWM channels 14. Precision on-chip clock/timer modules 15. Built-in temperature sensor for real-time chip monitoring 16. 12 programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 48 Carton Weight 5.90kgs / 13.01lb Carton Size 30cm * 42cm * 32cm / 11.81inch * 16.54inch * 12.6inch Loading Container 20GP: 661 cartons * 48 pcs = 31728 pcs40HQ: 1535 cartons * 48 pcs = 73680 pcs

Read more less

1. Available in 7-inch, 8-inch, and 10.1-inch screen versions, equipped with a 5-megapixel front camera.2. Live hot-plugging is strictly prohibited for any device except USB and HDMI.3. Type-C can be used as a USB SLAVE interface for flashing images or powering the device.4. Onboard M.2 M KEY interface, supports NVMe SSD protocol (or PCIe protocol AI module).5. Onboard M.2 B KEY interface, supports connecting 4G/5G communication modules.6. Optional versions: 2-ch RS485 + 2-ch RS232, or 4-ch RS485 (isolated).7. 1-ch CAN supports 1 Mbps communication rate (isolated).8. 2-ch digital output + 2-ch digital input (isolated).9. 2-ch ADC analog input (4-20mA current acquisition supported by desoldering components).10. Single controllable buzzer.11. Onboard EEPROM and encryption chip.12. Onboard BOOT button: press and hold the BOOT button before powering on, then connect to PC via Type-C to enter flashing mode.13. Do not connect other devices when flashing via Type-C; otherwise, insufficient power supply will cause device recognition failure.14. Onboard farad capacitor module, supporting power-off protection.Specification: Package Weight One Package Weight 0.60kgs / 1.33lb One Package Size 24cm * 20cm * 8cm / 9.45inch * 7.87inch * 3.15inch Qty per Carton 10 Carton Weight 7.10kgs / 15.65lb Carton Size 50cm * 22cm * 42cm / 19.69inch * 8.66inch * 16.54inch Loading Container 20GP: 577 cartons * 10 pcs = 5770 pcs40HQ: 1339 cartons * 10 pcs = 13390 pcs

Read more less

1. ESP32-C5-Touch-LCD-3.5 is a microcontroller development board designed by Waveshare. Onboard 3.5-inch LCD screen, power management chip, 6-axis sensor, temperature and humidity sensor, Micro SD card slot, etc., providing hardware foundation for display, sensing, voice, and multimedia storage. Relying on these hardware, the product can connect to online AI LLM platforms to achieve intelligent voice interaction and visual interaction.2. Adopts ESP32-C5-WROOM-1U series module, equipped with a RISC-V 32-bit processor, main frequency up to 240 MHz.3. Integrated 384 KB SRAM, 320 KB ROM, 8 MB PSRAM, and 32 MB Flash, meeting the needs for program execution, graphical user interfaces, and data storage.4. Integrated 2.4 GHz and 5 GHz dual-band Wi-Fi, Bluetooth 5 (LE), and IEEE 802.15.4 (supporting Zigbee 3.0 and Thread) wireless communication, featuring excellent RF performance.5. Onboard camera interface, supporting BF3901 camera.6. Onboard battery charge management module, with a reserved 3.7V MX1.25 lithium battery interface for external battery power supply.7. Uses Type-C interface, improving user convenience and device compatibility.8. Onboard 3.5-inch capacitive touch HD IPS screen, 320 x 480 resolution, 262K colors, capable of displaying color images clearly.9. Built-in ST7796 driver chip and FT6336 capacitive touch chip, using SPI and I2C interfaces for communication respectively, saving interface pin resources.10. Leads out UART, I2C, and some IO interfaces, integrated full-speed USB serial port.11. Onboard QMI8658 6-axis sensor, RTC clock sensor, SHTC3 temperature and humidity sensor, and TF card slot, etc.12. Onboard PWR and BOOT customizable side buttons, convenient for custom feature development using buttons.13. Onboard ES8311 audio codec chip, NS4150B power amplifier chip, microphone, and speaker, easily playing with Xiaozhi AI.14. Supports ESP-IDF / Arduino development environments, rich resources, easy to get started.LCD Screen Specifications:1. Display panel: IPS2. Display size: 3.5 inch3. Display resolution: 320 x 480 pixels4. Display color: 262K5. Display brightness: 450 cd/m26. Contrast ratio: 1100:17. Communication interface: SPI8. Driver IC: ST77969. Touch type: Capacitive sensing10. Touch IC: FT6336Specification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 13cm * 10cm * 5cm / 5.12inch * 3.94inch * 1.97inch Qty per Carton 100 Carton Weight 14.00kgs / 30.86lb Carton Size 45cm * 26cm * 38cm / 17.72inch * 10.24inch * 14.96inch Loading Container 20GP: 599 cartons * 100 pcs = 59900 pcs40HQ: 1392 cartons * 100 pcs = 139200 pcs

Read more less

1. Powered by ESP32-C6 high-performance 32-bit RISC-V processor with main frequency up to 160 MHz.2. Integrates Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, delivering excellent RF performance.3. Built-in 512 KB HP SRAM, 16 KB LP SRAM, and 320 KB ROM, with external 16 MB Flash memory.4. Uses a Type-C connector, eliminating worry about plug orientation.5. Onboard 1.28-inch capacitive LCD screen with 240 x 240 resolution and 65K color for clear displaying of colorful images.6. CNC metal top enclosure paired with an acrylic frosted back plate (optional).7. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope).8. Onboard PCF85063 RTC chip for easy implementation of Real-Time Clock functions.9. Onboard 3.7V MX1.25 lithium battery charging and discharging interface.10. Onboard SH1.0 14-PIN expansion header, routing out 6 GPIOs, 1 UART, and 1 I2C.11. Onboard MicroSD (TF) card slot for storage expansion and high-speed data transfer, enhancing flexibility.LCD Parameters:1. Display Panel: IPS2. Display Size: 1.28 inches3. Display Resolution: 240 x 240 pixels4. Display Colors: 65K5. Display Brightness: 400 cd/m26. Contrast Ratio: 1100:17. Communication Interface: SPI8. Driver IC: GC9A01ASpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 7cm * 7cm * 5cm / 2.76inch * 2.76inch * 1.97inch Qty per Carton 160 Carton Weight 9.10kgs / 20.06lb Carton Size 30cm * 37cm * 42cm / 11.81inch * 14.57inch * 16.54inch Loading Container 20GP: 572 cartons * 160 pcs = 91520 pcs40HQ: 1327 cartons * 160 pcs = 212320 pcs

Read more less

1. Equipped with a high-performance RISC-V 32-bit processor and a low-power RISC-V 32-bit processor, the high-performance processor has a clock speed up to 160 MHz, while the low-power processor can reach up to 20 MHz2. Integrated with Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, it has excellent radio frequency performance. 3. The board is equipped with an internal antenna and reserved solder pads, allowing it to be configured as an external antenna4. Onboard 320KB ROM, 512KB HP SRAM, 16KB LP SRAM, and an external 16MB Flash5. Onboard a 1.64-inch AMOLED capacitive touch screen with a resolution of 280 x 456 and 16.7M color6. The AMOLED screen uses the QSPI interface for display, and the capacitive touch uses the I2C interface7. Onboard a QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), which can detect motion posture and count steps, etc8. Onboard PWR and BOOT side buttons, BOOT supports custom key functions, making development more flexible9. Onboard a 3.7V MX1.25 lithium battery charging and discharging interface10. Onboard a Micro SD card slot, allowing external SD card storage for pictures or files11. Onboard a USB Type-C interface, which can be used for power supply and download debugging, facilitating development12. Exposed I2C, UART, and USB pins, available for external devices and debugging, allowing flexible configuration of peripheral functions13. The screen adopts a CNC processing structure with edge bonding, featuring a delicate and soft texture, and overall beauty and durabilityAMOLED screen parameters1. Display panel: AMOLED2. Display resolution: 280 x 456 pixels3. Display brightness: 350 cd/square meter4. Communication interface: QSPI5. Touch: supported6. Display size: 1.64 inches7. Display colors: 16.7M8. Contrast ratio: 60000:19. Driving IC: CO530010. Touch IC: FT6146Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 6cm * 4cm / 3.15inch * 2.36inch * 1.57inch Qty per Carton 288 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 288 pcs = 118656 pcs40HQ: 958 cartons * 288 pcs = 275904 pcs

Read more less