Search results for "network tester"

Features:1. Lower power supply noise, less noise when using harmonics;2. Built-in 400mAh battery3. Add MicroSD card to save test data;4. Add RTC support;5. Change the port names to Port1 and Port26. MicroSD supports less than 32GB, and only supports SPI mode.7. It can measure complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the wiring of the transceiver port8. Measure S parameters, VSWR, phase, delay, Smith chart, etc. parameter:1. PCB: 54mm x 85.5mm x 11mm (excluding connectors, switches)2. Measurement frequency: 50KHz-1.5GHz3. RF output: -13dbm (up to -9dbm)4. Frequency accuracy: less than 2ppm5. Frequency stability: less than 0.5ppm6. Measuring range: 70dB: 50kHz-300MHz, 50dB: 300M-900MHz, 40dB: 900M-1500MHz7. Port SWR: less than 1.18. Display: 2.8 inch TFT (320 x240)9. USB interface: USB type-C/usb-c Communication mode: CDC (serial)10. Power supply: USB 5V 120mA, built-in 400mAh battery, charging current 1A, can be used continuously for more than 4 hours11. Number of calibration points: 101 (fixed)12. Number of scanning points: 101 (fixed)13. Show trace: 4, mark: 4, set save: 5packing list:-1 x NanoVNA host (with 2.8-inch touch screen, 400mAh battery)-1 x SMA female to female connector-1 x SMA Easy Calibration Set SHORT-1 x SMA Easy Calibration Kit OPEN-1 x SMA Simple Calibration Set LOAD-1 x USB-C/Type-C data cable-1 x Touch pen-1 x Pick-1 x USB-C/Type-C to USB-C/Type-C cable-2 x 20cm SMA male to male RG174 RF cablesSpecification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 12cm * 10cm * 4cm / 4.72inch * 3.94inch * 1.57inch Qty per Carton 194 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 194 pcs = 34338 pcs40HQ: 412 cartons * 194 pcs = 79928 pcs

Read more less

1. Scope of application: can test 74ch series, osmo series, cd4000 series, hef400 series, 4500 series, operational amplifiers, interface chips, optocouplers, automatic transistor identification, voltage regulator voltage identification2. Integrate more than 1,300 types of chip data models and more than 420 types of transistor data models, covering most common general-purpose devices within 24 pins, which can greatly reduce maintenance workload and improve work efficiency3. Press the Enter key to turn on the machine for the first time and automatically run a self-test. The self-test detects the battery voltage and displays it on the screen after more than two seconds. When the battery voltage is lower than 7v, replace the battery to ensure the measurement accuracy. If If there is no alarm, the measurement work can be started4. Nativead 10 ad, the theoretical resolution of 5v voltage is 0.0048v5. Due to the use of batteries for power supply, it is not suitable for measuring high-power thyristors6. The Zener value must be based on the actual measurement, not just the nominal value7. The default directory for initialization is the search directory8. Different test modes: 5v mode, 3.3v mode, auto mode9. There are seven buttons on the panel, which are respectively used for up, down, left, right and typing keys and hotkeys o, p10. The up and down keys are used to adjust the catalog and change the model, and the left and right keys are used to move the cursor left and right to select the item to be changed11. The input key is used to change the machine and execute the test command12. Use two AA 1.5v batteries (not included), press Enter for more than 2 seconds to turn on the machine, and the current battery voltage will be displayed automatically when the machine is turned on. When the battery power is too low, replace the battery. Too low voltage will affect the reliability of the test results. and automatic shutdown protection13. After 60 seconds without any operation, it will automatically shut down14. Test socket: SOP16 narrow body, SOP20 medium body, SOP24 wide bodyThe device positioning method is as follows:1. Place the chip and optocoupler on the top of the alignment, and the 1-pin ic alignment seat2. The triode on the left, mostly three slots3. The 13 and 14 pins of the ic regulator are placedNote: Transistor display pin sequence from left to right corresponds to 10-foot, 11-foot, 12-foot ic block (not built-in battery or adapter)Specification: Package Weight One Package Weight 0.18kgs / 0.39lb One Package Size 15cm * 10cm * 4cm / 5.91inch * 3.94inch * 1.57inch Qty per Carton 188 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 188 pcs = 33276 pcs40HQ: 412 cartons * 188 pcs = 77456 pcs

Read more less

1. Measuring range: AC voltage 0-440V2. Battery type: 6x1.5V LR14 battery3. Test voltage: 0~440V4. Ambient temperature: 0~50 degrees Celsius5. Relative humidity: 30%~90%6. Simple operation and accurate test7. Large-screen backlight display, large fonts, large strokes, clear readings in dim environments8. It is designed with a detachable PVC silicone protective cover, which is shockproof and drop-resistant, strong, wear-resistant and durable, and protects internal components9. It can widely measure leakage switch tripping current, tripping time, loop resistance and online measurement voltage, frequency, etc. It is an ideal tool for electrical inspection and maintenanceNote: This product is shipped without batteriesSpecification: General Certificate EMC, LVD Package Weight One Package Weight 2.05kgs / 4.52lb One Package Size 33cm * 27cm * 9cm / 12.99inch * 10.63inch * 3.54inch Qty per Carton 10 Carton Weight 20.46kgs / 45.11lb Carton Size 52cm * 35cm * 37cm / 20.47inch * 13.78inch * 14.57inch Loading Container 20GP: 396 cartons * 10 pcs = 3960 pcs40HQ: 919 cartons * 10 pcs = 9190 pcs

Read more less

Specification:1. Model: FNAC-282. Screen: 1.06 inch2. Monitor voltage: 4~24V 0.001V +-(0.2%+2)3. Monitor current: 0~6.5A 0.001A +-(0.2 per mille +2)4. Monitor power: 0~156W 0.001W +-(0.2 per mille +2)5. Response time: 1 second6. Dimensions: 73 x 36 x 12mmFeatures:1. Multi-function USB ammeter, bi-directional current, professional-grade ripple monitoring, USB-A/Type-C dual interface, super fast charging, plug and play, high measurement accuracy2. With USB-A, Type-C dual male port, suitable for different interfaces of the charger detection and charging detection, plug and play, no need to transfer3. Equipped with a 16-bit ADC chip, bringing unparalleled high-precision measurement to meet your stringent requirements4. Real-time power detection bidirectional current charging, 6.5A high-current USB interface, straight-through charging power detection, Type-C interface supports bidirectional current output5. Fast charging protocol all-round king, supports a variety of protocol triggers, covering the mainstream fast charging protocols, adjustable output voltage, automatic detection, intelligent triggering, fast charging without worries6. Diversified curve detection modes: real-time voltage and current curve detection; D+D-voltage curve detection; high-speed voltage and current curve detection7. Cable detection in one machine, cable resistance detection, cable reading, analog testing, all-round protection of your charging safety5 groups of data records, power outage memory worry-free, restart and continue to test without interruption, built-in battery capacity intelligent calculation, at any time to grasp the power state8. It fully features: adjustable brightness, custom standby time, temperature symbol switching, language switching, analog DASH, analog Apple 2.4A, and so on.9. Comprehensive coverage of chargers, all kinds of data cables, charging treasure, laptop charging test, and interface performance at a glanceSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 12cm * 6cm * 4cm / 4.72inch * 2.36inch * 1.57inch Qty per Carton 150 Carton Weight 11.50kgs / 25.35lb Carton Size 42cm * 32cm * 38cm / 16.54inch * 12.6inch * 14.96inch Loading Container 20GP: 522 cartons * 150 pcs = 78300 pcs40HQ: 1212 cartons * 150 pcs = 181800 pcs

Read more less

1. Working voltage: 2.6~3.3V2. Test voltage range: 0.1V~250V / 40~1kHz3. Working temperature: 0~40 degrees Celsius4. Working humidity: Relative humidity 20%~75%5. Material temperature: -10~50 degrees Celsius6. Raw material humidity: Relative humidity 20%~80%7. RCD current: more than 30mA8. RCD working voltage: 220+/-20V9. Battery: 2 AAA batteries (not included)10. Size: 64.5x64.5x58.2 (mm)11. Mainly used to detect the plug polarity and the safety of the leakage switch, which can quickly and accurately detect the plug wiring. At the same time, the plug voltage can be tested and displayed on the LED display of the LCD screen.12. Features: VA color display, leakage protection, zero line recognition, automatic shutdown, non-contact detectionSpecification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 12cm * 12cm * 10cm / 4.72inch * 4.72inch * 3.94inch Qty per Carton 40 Carton Weight 7.00kgs / 15.43lb Carton Size 52cm * 50cm * 25cm / 20.47inch * 19.69inch * 9.84inch Loading Container 20GP: 410 cartons * 40 pcs = 16400 pcs40HQ: 952 cartons * 40 pcs = 38080 pcs

Read more less

1. A 4-inch LCD screen is used. Due to the larger screen, there is more PCB space for installing components and batteries2. Use an independent charge pump to power the mixer and add tantalum capacitors, which can further reduce power supply noise3. In order to make it easier for geeks to create more possibilities, UART1 and PC14, PC15 interfaces are drawn on the PCB, which is convenient for DIY expansion4. ABS shell, can effectively protect SMA connectors and buttons5. DC dimming is added, it can be seen more clearly when used outdoors, and it is more comfortable to use indoors.6. Optimized the bridge to make full use of the Si5351s harmonics. Now the 5th harmonic can be used to measure to 1.5GHz;7. When the fundamental wave is used, the output level of CH0 is increased to 0dBm, and the reflection measurement is more accurate;8. Solve the previous abnormality of NanoVNA-H near 6MHz9. The redesigned power management circuit further reduces power noise, reduces USB power interference, reduces charging current, and protects the battery10. Optimized PCB layout, accommodating 1950mAh battery, more than 8 hours of usepacking list:1. NanoVNA host x 1 (including 4-inch touch screen, 2000mAh battery)2. 15cm SMA male to male RG316 RF cable x 23. SMA female to female connector x14. SMA simple calibration kit SHORT x15. SMA simple calibration kit OPEN x16. SMA simple calibration kit LOAD x17. USB Type-C data cable x18. Type-c to Type-c x1 supports connection with most Android phones9. One pickSpecification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 24cm * 14cm * 3cm / 9.45inch * 5.51inch * 1.18inch Qty per Carton 40 Carton Weight 15.80kgs / 34.83lb Carton Size 50cm * 30cm * 32cm / 19.69inch * 11.81inch * 12.6inch Loading Container 20GP: 555 cartons * 40 pcs = 22200 pcs40HQ: 1289 cartons * 40 pcs = 51560 pcs

Read more less

1. Measuring range: 10000M2. Test voltage: 50V-2500V3. Repeat error: -+0.5%4. Ambient temperature: 0-60 degrees Celsius5. Connect the test leads to the circuit or power supply to be tested and read the measurement results from the display6. When the measured resistance is less than 5000, the buzzer will sound7. High-definition LCD display with clear characters, suitable for low-visibility nighttime environments8. During the test process, multiple sets of data can be saved for easy reference.9. Equipped with complete protection and anti-drop sleeve, which fits closely with the groove to prevent damage10. The test leads can be inserted smoothly and firmly into the corresponding terminals, and there are maximum limit indications11. Multiple ranges can be set to facilitate selection as needed12. Battery: 8x1.5V AA (not included in this product)13. Designed with a removable PVC silicone protective cover, which is shock-proof and drop-proof, strong and wear-resistant, and protects internal components.14. It can widely measure leakage switch tripping current, tripping time, loop resistance and online measurement of voltage, frequency, etc. It is an ideal tool for electrical inspection and maintenance.Specification: Package Weight One Package Weight 1.35kgs / 2.99lb One Package Size 23cm * 12cm * 5cm / 9.06inch * 4.72inch * 1.97inch Qty per Carton 24 Carton Weight 33.40kgs / 73.63lb Carton Size 48cm * 38cm * 22cm / 18.9inch * 14.96inch * 8.66inch Loading Container 20GP: 664 cartons * 24 pcs = 15936 pcs40HQ: 1542 cartons * 24 pcs = 37008 pcs

Read more less

1. Video signal test function: built-in high-definition 5.0-inch 800 (RGB) x 480 wide viewing angle display, supporting PAL/NTSC image signals2. PTZ control function: Built-in Pelco-D/P PTZ control protocol, through RS485 interface, you can control the up, down, left, right, zoom, focus, aperture size of the PTZ3. DC12V 1A power output function: provide temporary power supply for the camera4. Audio test function: you can test the audio equipment such as pickups on the front-end of video surveillance5. Enhanced network cable test function: through the UTP CABLE TEST test port on the instrument6. Support VGA video input, when accessing VGA video cable, enter the menu and select VGA mode, resolution support 1024 x 768, 1280 x 10247. Support HDMI video input, when accessing HDMI video cable, it will automatically switch to HDMI mode, the resolution supports 480i/P, 576i/P, 720i/P, 1080i/P8. TVI camera test, support 720p 25/30/50/60fps/1080p 25/30fps, 5MP.8MP resolution camera image test9. AHD camera test, support 720p 25/30fps/ 1080p25/30fps, 5MP.8MP resolution camera image test10. CVI camera test, support 720p 25/30fps/ 1080p25/30fps, 5MP.8MP resolution camera image test11. Built-in 3.7V 3000mAh Li-polymer battery12. Charging time: about 2-3h13. Use time: about 6h (without CCD power output)Packing list:- Frequency monitoring tester x 1- US plug adapter x 1- BNC cable x 1- RS485 connector x 1- Power output conversion cable x 1- Audio cable x 1- Lanyard x 1- Storage bag x 1- Instruction manual x 1Specification: Package Weight One Package Weight 1.20kgs / 2.65lb One Package Size 30cm * 15cm * 6cm / 11.81inch * 5.91inch * 2.36inch Qty per Carton 24 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 24 pcs = 4248 pcs40HQ: 412 cartons * 24 pcs = 9888 pcs

Read more less

1. Voltage range: AC 30-260V/45-65Hz2. Leakage voltage range: 0-99V/45-65Hz3. Test stroke time: 10-1000mS4. GFCI test: 5mA (HT97B)5. RCD test: 30mA (HT97D/HT97E)6. Voltage measurement: 48V-250V/45-65Hz7. Power supply: two 1.5V AAA Batteries (Batteries not included)8. Simply plug the tester into a powered three-pin outlet. The on-screen display allows you to easily determine the outlets wiring condition and AC voltage. If a wiring error is detected, the orange backlight will illuminate to indicate the wiring error.9. After plugging the tester into the outlet, the data will automatically lock after three seconds. Once locked, press the unlock button.10. Press and hold the RCD button for more than 2 seconds. A properly functioning residual current circuit breaker (RCD) should trip and display the trip time. The button indicator will flash, indicating the tripping process is complete. If it does not trip, the residual current circuit breaker is faulty.11. The instrument automatically shuts down if no operation is performed within 5 minutes of powering on.12. Compact and portable, it is easy to operate.13. The high-definition backlit display ensures clear visibility even in dimly lit environments, making the test results clear and easy to understand.14. Widely applicable, it can be used to check the safety of outlet wiring in homes, offices, shopping malls, and other locations.15. Dimensions: HT97B 67x65x63mm; HT97D 67x65x75mm; HT97E 67x65x63mm16. Weight: HT97B 92g; HT97D 103g; HT97E 103gSpecification: Package Weight One Package Weight 0.13kgs / 0.29lb One Package Size 9cm * 9cm * 10cm / 3.54inch * 3.54inch * 3.94inch Qty per Carton 80 Carton Weight 7.40kgs / 16.31lb Carton Size 40cm * 33cm * 36cm / 15.75inch * 12.99inch * 14.17inch Loading Container 20GP: 561 cartons * 80 pcs = 44880 pcs40HQ: 1302 cartons * 80 pcs = 104160 pcs

Read more less

1. Monitoring voltage: 4-28V2. Monitoring current: 0-7A3. Monitoring power: 0-120W4. D+/D- voltage: 0-3.3V5. Dimensions: 42x13x82mm6. Compatible with all interfaces, with 5P high-current USB-A, 24P all 7. Pin TYPE-C input and output interfaces, charging detection8. 2.0-inch LCD high-definition display, the measurement data is clearly visible9. 0.00001 low resolution, real-time detection of subtle changes in voltage, power and power during charging10. Support automatic protocol detection, PD2.0, PD3.0, PPS, QC2.0, QC3.0, QC4, FCP, SCP, AFC, PE, DASH VOOC, SuperVOOC, etc.11. Simple display interface, independent function menu, humanized operation12. Four functional curve display, cable detection13. 10 groups of energy records, battery capacity can be calculated by formula14. Driver-free installation, efficient and convenient data synchronization, Bluetooth APP overvoltage and overcurrent alarmSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 10cm * 6cm * 4cm / 3.94inch * 2.36inch * 1.57inch Qty per Carton 318 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 318 pcs = 56286 pcs40HQ: 412 cartons * 318 pcs = 131016 pcs

Read more less

Features1. It is suitable for measuring the insulation resistance of various electrical equipment and insulating materials such as transformer, motors, cables, switches, electrical appliances, etc. 2. Icon display/alarm light on/buzzer alarm three types of alarms to prevent the danger of electric shock. Multiple gears can be selected to measure high and low, and the voltage can be measured after shifting. 3. This instrument is a high performance digital instrument, with large LCD display, display screen make it easy to read measurements. 4. Insulation resistance meter is beautiful, wide range, high accuracy, high resolution, convenient operation, easy to carry. 5. Resistance short circuit protection makes the measurement safer and more assured. Carry out maintenance, testing and verification of various electrical equipment.Functions1. Measurement of insulation resistance 2. AC measurement 3. DC measurement 4. Small resistance measurement 5. Live detection of tested resistance 6. Short circuit protection of measured resistance 7. AC and DC automatic identification 8. Measurement data is locked. 9. Polarization Index 10. Absorption ratio test 11. Automatic discharge 12. Low battery reminder 13. Large LCD screen digital display 14. External DC power supply DC9V 1.5A 15.10M internal resistance measurement 16. Over limit alarm 17. Auto range 18. Red alarm light, buzzer alarm. 19. High voltage alarm 20. Test voltage displaySpecification1. Technical parameters display: Large-screen LCD (up to 500 counts). 2. Over limit indication: Hi: The mark appears on insulation resistance range. 3. Auto range: Higher range: 500 counts, Lower range: 1 count (only on insulation resistance range) 4. Sampling Rate: 2 times / second 5. Allowed altitude: Less than or equal 2000m (for indoor use) 6. Operation environment: Temperature: 0-40 degree C / Humidity: Less than or equal 85% 7. Operation environment: Temperature: -20-60 degree C / Humidity: Less than or equal 90% 8. Overload protection: Insulation resistance range: AC 1200V / 10 seconds; Voltage range: AC 720V / 10 seconds 9. Withstand voltage:AC 6000V (50 / 60Hz) / 5 seconds (between circuit and periphery) 10. Insulation resistance: Greater than or equal 1000M ohms / DC 1000V (between circuit and periphery) 11. Power supply: DC 9V (6x1.5V AA batteries, not included) 12. Current consumption: Approximately 1.5A (normally maintained at approximately 50mA) 13. Battery Life: About 12 hours 14. Dimension: 176 x110 x 77mmSpecification: Package Weight One Package Weight 1.00kgs / 2.21lb One Package Size 21cm * 20cm * 10cm / 8.27inch * 7.87inch * 3.94inch Qty per Carton 10 Carton Weight 11.50kgs / 25.35lb Carton Size 50cm * 43cm * 26cm / 19.69inch * 16.93inch * 10.24inch Loading Container 20GP: 477 cartons * 10 pcs = 4770 pcs40HQ: 1107 cartons * 10 pcs = 11070 pcs

Read more less

1. Automatically identify components, automatically select based on component characteristics, making the measurement process more convenient and efficient2. Multiple frequency tests, effective value test levels. Supports five test frequencies: 100Hz, 120KHz, 1kHz, 10kHz, and 100KHz. It is suitable for the measurement requirements of different application scenarios. With effective value test levels of 0.1V, 0.3V, and 0.6Vrms, the measurement results are more accurate and reliable3. Four-segment digital display, with high precision, capable of simultaneously showing main and auxiliary parameters4. Internal bias function, eliminating material nonlinearity, restoring true capacity, enabling precise measurement and control of nonlinear components, weak signals, or complex environments5. One-click locking and recording, making measurement more efficient. Press lightly to lock the current reading, press for a long time to activate the recording mode. The test results are classified and statistically analyzed in real time. The measurement is accurate, clear to view, and the detection efficiency is doubled. It enables you to easily control each measurement6. Five test scenarios, supporting precise measurement of capacitors, resistors, inductors impedance, electrolytic capacitors, etc7. Compact handheld design, allowing for precise measurement anytime and anywhere8. Open circuit/closed circuit correction function, used to eliminate systematic errors introduced by test fixtures and cables, which directly affect the accuracy of the measurement resultsParameters1. Test frequency: 100Hz, 120Hz, 1KHz, 10KHz, 100KHz2. Basic accuracy: 0.3%3. Display screen: 2.8 inch TFT liquid crystal display4. Display digits: main parameter: 4 1/2 digits, secondary parameter: 4 1/2 digits5. Test level: 0.1V, 0.3V, 0.6V6. Calibration function: open circuit calibration, short circuit calibration7. Internal bias: 0.0V, 0.5V8. Test port configuration: three-terminal, five-terminal9. Output impedance: 100Ω10. Communication interface: USB-TypeC (virtual serial port)11. Comparison function: used to calculate the relative error between the measured value of the component and the nominal value, displayed in percentage, and provide screening results. Nominal value and tolerance can be set, and the tolerance range can be defined from 0.1% to 99.9%12. Recording function: check whether the data of the tested component conforms to the set nominal value and tolerance, record the number of successful and failed measurement data13. Battery capacity: 3000mAh14. Supported languages: Chinese, EnglishSpecification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 24cm * 16cm * 8cm / 9.45inch * 6.3inch * 3.15inch Qty per Carton 16 Carton Weight 13.00kgs / 28.66lb Carton Size 50cm * 34cm * 34cm / 19.69inch * 13.39inch * 13.39inch Loading Container 20GP: 461 cartons * 16 pcs = 7376 pcs40HQ: 1071 cartons * 16 pcs = 17136 pcs

Read more less