Search results for "electronics battery accessories"

1. Module parameters:- Power supply voltage: DC4.5-6V (micro USB interface)- Working current: no more than 70mA- Discharge voltage: 1.00V-15.00V Resolution 0.01V- End voltage range: 0.5-11.0V- Support through current: no more than 3.000A resolution 0.001A- Voltage measurement error: less than 1% + 0.02V- Current measurement error: less than 1.2% +-0.002A- Battery capacity range: 9999Ah (1Ah = 1000mAh) 2.2. When the value is large, it is switched by decimal point shift. When it is less than 10Ah, it will be displayed as X.XXX, when it reaches more than 10Ah, it will be displayed as XX.XX, and so on.3. Circuit board size: 50mmX37mm4. Finished product size: 50mmX37mmX17mm (Length X Width X Height, including copper foot height)5. Weight of board and accessories: single board 28g (including copper pillar), two 5W ceramic resistors 9g, 50W resistor about 27g (including wire)6. Note: In order to improve the voltage measurement accuracy, this circuit is specially designed with DC bias. When the terminal is connected nothing, a small voltage will be displayed, which does not affect the actual measurement. 0V) will display 0. If you want to understand the principle, you can check the superposition theorem in electrical engineering.7. How to use:- The battery under test should be fully charged first.- Connect the positive pole of the battery under test to the input positive pole, and the negative pole to the negative pole of the input. Connect the load to the output positive pole and the output negative pole, and connect the tester micro USB with working power (not available for desktop or notebook USB power supply). The battery voltage is displayed at this time.- To start the test directly, just press the “OK” button, the tester can automatically formulate a suitable termination voltage according to the full charge voltage of the battery, and will flash the display 3 times to start the test. Need to manually set the termination voltage, just press the "+" or "-" button to modify in the battery voltage display state, the termination voltage is displayed at the beginning of P, the back represents the voltage value, the resolution is 0.1V, after setting, press "OK" "start testing.- After the test starts, the tester will turn on the electronic switch that controls the load. The test process data display will be displayed between the discharge capacity (Ah), the current discharge current (A) and the battery voltage (V). When the battery voltage reaches the set termination voltage, the tester cuts off the load control switch, the display data stays above the capacity (Ah) and flashes quickly with the corresponding indicator light, the displayed capacity is the actual discharge capacity of the battery, press it "OK" can stop the flashing and let the data display stably. Press the "OK" button again to restore to the state of just powering up and replace the battery to test the next section ...8. Error code and meaning:- Err1: The battery voltage is higher than 15V- Err2: The battery voltage is lower than the set termination voltage- Err3: The battery cannot bear the load discharge current or the line internal resistance is too large- Err4: Current is too large (current exceeds 3.1A)- Err5: Improper use or wiring error has caused the device to burn down and cannot be used (current sampling or control switch MOS burned)9. Note: If the battery is reversed, when the load is turned on and the load current is large (about> 0.8A), the circuit switch tube may be damaged!10. Secondary calibration operation: Press and hold three buttons to power on the tester at the same time, enter the calibration mode, first display the number of calibration records, then enter the formal calibration sampling program to display 0u0A, then short-circuit the input positive and negative poles and press "OK "Button to complete displaying J10u, apply a standard DC voltage of 10.00V between the input positive and negative electrodes, press the" OK "button, and then display J2.0A, apply to the output negative electrode (inflow direction) and input negative electrode (outflow direction) After a constant DC current of 2.0A, press the "OK" button once to complete the calibration. The tester will pre-check the calibration data. If the calibration data is reliable, it will display 4 calibration numbers in turn and then exit. If the pre-audit believes that the data is not reliable, discard the data and exit.Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 500 Carton Weight 23.00kgs / 50.71lb Carton Size 50cm * 50cm * 46cm / 19.69inch * 19.69inch * 18.11inch Loading Container 20GP: 231 cartons * 500 pcs = 115500 pcs40HQ: 538 cartons * 500 pcs = 269000 pcs

Read more less

Features1. Material: Made of premium and durable nylon material exterior and soft lining interior, lightweight and sturdy, offer comprehensive protection against knocks, impacts, bumps, drops, dents and scratches. 2. Multi-usage: It can hold power adapters, charger, batteries, power bank, mouse, earphones, hard drive, memory cards, mini digital camera, pen, cables, external driver, flashdrive, basic first aid items, chargers, several USB cables, scissors, makeup, passport ,memory cards,key, smartphones and such. 3. Easy to Carry: Portable and lightweight design, the slim profile of the case makes it very easy to fit inside of carry-ons, office, leisure, travel can carry, easy to put in a backpack or handbag. 4. Waterproof and Dustproof: The electronics organizer case adopt waterproof fabric, do not worry about wet from splashing water or rain, and protects your laptop accessories against spills, dust, and other contaminants, easy to wash and reuse. 5. Convenience: Smooth zippers make it easier to open and close the bag to get your charger, cable or any other electronic accessories in a short time. If you are tired of rummaging around the house for your little gadgets, this organizer can do you a favor.Specifications1. Fabric: Polyester 2. Lining: 210D 3. Ingredients: Nylon Mesh 4. Size: 19.5 x 12 x 8.5cm / 7.78 x 4.7 x 3.3 in 5. Weight: 60gSpecification: General Certificate GPSR Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 19cm * 15cm * 3cm / 7.48inch * 5.91inch * 1.18inch Qty per Carton 40 Carton Weight 3.04kgs / 6.70lb Carton Size 41cm * 32cm * 27cm / 16.14inch * 12.6inch * 10.63inch Loading Container 20GP: 752 cartons * 40 pcs = 30080 pcs40HQ: 1747 cartons * 40 pcs = 69880 pcs

Read more less

1. Model: USB2. Input parameters: 5.2V 0.5-2A3. Output parameters: 7.4V 1000mA4. Applicable: home appliances, toys5. Rated power: 8-13W6. Suitable for all kinds of XH-3P interface rechargeable batteries, supporting multiple charging methods7. Aluminum alloy USB interface, good conductivity8. High-quality wire is not easy to break9. XH-3P standard charging interface, firmly connected10. Cable length: 56 cm (including plug)LED light prompt function:- Steady red light in no-load state- The charging status red light is always on, and the green light is flashing- Green light is always on when fully chargedSpecification: Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 15cm * 9cm * 3cm / 5.91inch * 3.54inch * 1.18inch Qty per Carton 132 Carton Weight 5.72kgs / 12.61lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 132 pcs = 61512 pcs40HQ: 1083 cartons * 132 pcs = 142956 pcs

Read more less

1. Built-in 21700 lithium battery with 5000mAh (18.25Wh) capacity. Combined with the camera's internal battery, it delivers up to 9 hours of shooting time. Supports 18W fast charging input and up to 20W PD output.2. Custom-designed for Insta360 Luna series with a press-type quick-release buckle design. Fits the camera body tightly and locks securely to prevent loosening or shaking during action and tracking shots.3. Features a standard 1/4-inch threaded hole on the handle base for easy connection to tripods, extension poles, or selfie sticks, catering to time-lapse, static product, and outdoor tracking photography needs.4. The rear USB-C port supports up to 20W PD output, capable of powering smartphones, fill lights, or audio receivers on the go.5. Built-in chip-level security protections defend against overcharge, overdischarge, overvoltage, overcurrent, short circuit, and overheating.Specifications:1. Battery Cell Type: 21700 Lithium-ion Battery2. Battery Cell Capacity: 5000mAh 3.65V/18.25Wh3. Input:--USB-C2: 5V 3A, 9V 2A, 12V 1.5A 18W Max4. Output:--USB-C1: 5V 2A 10W Max--USB-C2: 5V 3A, 9V 2A, 12V 1.67A 20W Max--USB-C1+C2: 5V 3A 15W Max5. Operating Temperature: 0-40 degrees C6. Charging Temperature: 5-45 degrees CSpecification: General Compatible with Insta360: Luna Pro, Luna Ultra Package Weight One Package Weight 0.19kgs / 0.43lb One Package Size 18cm * 10cm * 7cm / 7.09inch * 3.94inch * 2.76inch Qty per Carton 60 Carton Weight 12.20kgs / 26.90lb Carton Size 40cm * 32cm * 30cm / 15.75inch * 12.6inch * 11.81inch Loading Container 20GP: 694 cartons * 60 pcs = 41640 pcs40HQ: 1612 cartons * 60 pcs = 96720 pcs

Read more less

1. Increased Battery Capacity: Upgraded from B2 to B100 with a 10000mAh cell capacity, offering 92% more power while maintaining a lightweight design2. Precision Power Management: Equipped with a Texas Instruments BMS chip for accurate 1-100% battery level display and efficient power delivery3. Enhanced Safety Features: Built-in temperature sensors and protection switches ensure safe operation by monitoring and reducing internal temperatures4. High Voltage Efficiency: Adopts a high-voltage design for improved power conversion efficiency, delivering higher output with less heat generation5. Portable and Lightweight: Weighing only 184g, the compact battery is easy to carry and store, perfect for on-the-go use6. Package included:1 x Replacement Battery1 x Cable1 x English User ManualOther things not includedSpecification: Package Weight One Package Weight 0.26kgs / 0.57lb One Package Size 9.2cm * 6cm * 5.4cm / 3.62inch * 2.36inch * 2.13inch Qty per Carton 116 Carton Weight 30.00kgs / 66.14lb Carton Size 44cm * 29cm * 26cm / 17.32inch * 11.42inch * 10.24inch Loading Container 20GP: 803 cartons * 116 pcs = 93148 pcs40HQ: 1865 cartons * 116 pcs = 216340 pcs

Read more less

Features1. Material: Made of premium and durable nylon material exterior and soft lining interior, lightweight and sturdy, offer comprehensive protection against knocks, impacts, bumps, drops, dents and scratches. 2. Multi-usage: It can hold power adapters, charger, batteries, power bank, mouse, earphones, hard drive, memory cards, mini digital camera, pen, cables, external driver, flashdrive, basic first aid items, chargers, several USB cables, scissors, makeup, passport ,memory cards,key, smartphones and such. 3. Easy to Carry: Portable and lightweight design, the slim profile of the case makes it very easy to fit inside of carry-ons, office, leisure, travel can carry, easy to put in a backpack or handbag. 4. Waterproof and Dustproof: The electronics organizer case adopt waterproof fabric, do not worry about wet from splashing water or rain, and protects your laptop accessories against spills, dust, and other contaminants, easy to wash and reuse. 5. Convenience: Smooth zippers make it easier to open and close the bag to get your charger, cable or any other electronic accessories in a short time. If you are tired of rummaging around the house for your little gadgets, this organizer can do you a favor.Specifications1. Fabric: Polyester 2. Lining: 210D 3. Ingredients: Nylon Mesh 4. Size: 17 x 9.8 x 7cm / 6.7 x 3.8 x 2.7 in 5. Weight: 45gSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 16cm * 11cm * 3cm / 6.3inch * 4.33inch * 1.18inch Qty per Carton 50 Carton Weight 3.20kgs / 7.05lb Carton Size 41cm * 32cm * 27cm / 16.14inch * 12.6inch * 10.63inch Loading Container 20GP: 752 cartons * 50 pcs = 37600 pcs40HQ: 1747 cartons * 50 pcs = 87350 pcs

Read more less

1. The bracket is designed for DJI FPV Goggles V2 battery, fix the battery well and is installed on the headband of goggles. 2. This clip of Battery can be fixed on the headband of goggles V2, good way to charge your goggles and increase your playing time if you have another charging cable and battery as backup. 3. This bracket is ultra portable, easy to install and uninstall, will give you better flying experience. 4. Made of plastic material, durable to use 5. Small size, light weight, easy to carrySpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 6cm * 2.5cm / 3.94inch * 2.36inch * 0.98inch Qty per Carton 200 Carton Weight 5.00kgs / 11.02lb Carton Size 52cm * 32cm * 42cm / 20.47inch * 12.6inch * 16.54inch Loading Container 20GP: 381 cartons * 200 pcs = 76200 pcs40HQ: 885 cartons * 200 pcs = 177000 pcs

Read more less

1. Large Capacity & Long-lasting Battery Life: Built-in 5000mAh battery pack provides sustained power for VR devices, enabling long immersive gaming sessions and eliminating battery anxiety.2. Convenient Fast Charging Design: Fully charges in approximately 2 hours, supports pass-through charging while in use. Its compact, portable form factor does not interfere with VR wearing comfort, and it features multiple safety protections (charging protection, overcurrent protection, overvoltage protection, short-circuit protection).3. Immersive RGB Lighting Effects: Equipped with a 360 degrees circular RGB breathing light, which can be controlled via a dedicated button, adding a futuristic and atmospheric touch to enhance the visual experience of your VR setup. (This feature is limited to the A8.)4. User-friendly Interface & Accessories: Features a 90 degrees angled USB-C output to prevent cable bending and interference during wear. It also includes a USB-C input port, battery level indicators, and a combined power/lighting control button for intuitive operation.5. Lightweight & Wide Compatibility: The compact, portable design is specifically tailored for VR headsets, offering a lightweight build and secure fit that is compatible with most mainstream VR models, without adding extra burden to the wearer.Specification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 11cm * 5cm * 5cm / 4.33inch * 1.97inch * 1.97inch Qty per Carton 100 Carton Weight 18.00kgs / 39.68lb Carton Size 44cm * 25cm * 25cm / 17.32inch * 9.84inch * 9.84inch Loading Container 20GP: 969 cartons * 100 pcs = 96900 pcs40HQ: 2251 cartons * 100 pcs = 225100 pcs

Read more less

1. Supports power accumulation, transferring remaining power from multiple batteries to the one with the highest charge. With the DJI 65W Portable Charger, three Intelligent Flight Batteries can be fully charged in about 2 hours, or three Intelligent Flight Battery Plus units in about 3 hours. It can also fast-charge devices such as controllers and smartphones. (Charging time is measured in a test environment with a temperature of 25 degrees Celsius. Actual charging time may increase due to higher ambient temperatures or variations in mains voltage between regions.2. Charging Temperature: 5-40 degrees Celsius (41-104 degrees Fahrenheit)3. Input: 5-15 V, up to 4.3 A4. Output: 5-15 V, up to 2 A5. Tips: The charger is not included.6. Compatibility:DJI Mini 5 Pro Intelligent Flight BatteryDJI Mini 5 Pro Intelligent Flight Battery PlusSpecification: General Compatible with DJI: Mini 5 Pro Package Weight One Package Weight 0.14kgs / 0.32lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 90 Carton Weight 13.70kgs / 30.20lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 90 pcs = 37080 pcs40HQ: 958 cartons * 90 pcs = 86220 pcs

Read more less

Features1. Extended Filming Time: Perfect for those long shoots, the 2800mAh Pocket 3 battery provides additional usage time 2. Versatile Connectivity: The 1/4 inch thread at the bottom can connect accessories like tripods, delivering an enhanced user experience. 3. Smart Portection: Built-in overcurrent protection, overvoltage protection, short circuit protection, temperature protection, overcharge protection, over-discharge protection; Comprehensive protection against short circuits, overcharging and other risks means you can charge and shoot with confidence, knowing your equipment is safe 4. Compact and Portable: Lightweight and easy to carry, this device is designed for those who are on the move; Our longer battery grip offers better ergonomics for a comfortable hold, you have reliable power at your fingertipsSpecifications1. Material: ABS + PC 2. Port: Type-C 3. Output/Input: 5V2A 4. Battery Capacity: 2800mAh 10.36WhPackage List1. Battery x 1 2. Charging cable x 1 3. Manual x 1 4. Color box x 1Specification: General Certificate MSDS, FCC, EMC, UKCA Compatible with DJI: Osmo Pocket 4, Osmo Pocket 3 Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 10cm * 6cm * 4cm / 3.94inch * 2.36inch * 1.57inch Qty per Carton 100 Carton Weight 11.30kgs / 24.91lb Carton Size 42cm * 32cm * 22cm / 16.54inch * 12.6inch * 8.66inch Loading Container 20GP: 901 cartons * 100 pcs = 90100 pcs40HQ: 2093 cartons * 100 pcs = 209300 pcs

Read more less

Features1. 6 x 18650 batteries power bank without soldering (battery not included) 2. Built-in anti-reverse chip, the motherboard will not be burned when reverse installation 3. High-bright lighting (press and hold the switch for 3 seconds to wake up) 4. MAX supports 24W 5. Support VOOC 20W fast charging for Apple 6. Support 22.5W, suitable for Huawei 7. Supports Samsung/Xiaomi/OPPO/vivo fast charging fast charging 8. Charging current up to 5A, efficiency up to 96% 9. Support two-way fast charging 10. Hardware-integrated Bidirectional Marker Codec (BMC) protocol 11. Integrated physical layer protocol (PHY) 12. Integrated hardware CRC 13. Support Hard Reset 14. Support temperature loop control 15. Automatic load detection/light load detection 16. Support fast charging status indication 17. Input overvoltage and undervoltage protection 18. Output overcurrent, overvoltage and short circuit protection 19. Battery overcharge, over-discharge, and over-current protection 20. Built-in IC over-temperature protection 21. Integrated charging and discharging battery temperature NTC protection 22. ESD 4KV Warm reminder: This product does not include batteries. The battery in the picture is only used to demonstrate how to use the product.Specifications1. Shell material: ABS plastic 2. Output fast charging protocol: Support PPS/PD3.0/PD2.0, QC3.0/QC2.0, AFC, FCP, supports SCP, PE2.0/PE1.1, SFCP, low voltage direct Charge 3. Input fast charging protocol: Support PD3.0/PD2.0, AFC, FCPSpecification: General Certificate ROHS, EMC Package Weight One Package Weight 0.12kgs / 0.25lb One Package Size 17cm * 9cm * 3cm / 6.69inch * 3.54inch * 1.18inch Qty per Carton 120 Carton Weight 12.76kgs / 28.13lb Carton Size 43cm * 34cm * 45cm / 16.93inch * 13.39inch * 17.72inch Loading Container 20GP: 405 cartons * 120 pcs = 48600 pcs40HQ: 940 cartons * 120 pcs = 112800 pcs

Read more less

1. Sliding blade design, compatible with various specifications of batteries2. LED lights show charging status3. Environmentally friendly engineering plastic material, high temperature resistance, safe heat dissipation4. Intelligent compatibility, 4-slot independent control, no influence on each other5. Input: 220V6. Output: 1.2V 250mA7. Rechargeable battery: NI-MH/NI-CD AAA/AA8. Size: about 10.2 x 6.9 x 2.9cm9. Weight: about 120g10. Description: only the charger, excluding other items such as batteries in the pictureSpecification: Package Weight One Package Weight 0.13kgs / 0.28lb One Package Size 13cm * 8cm * 4cm / 5.12inch * 3.15inch * 1.57inch Qty per Carton 120 Carton Weight 13.50kgs / 29.76lb Carton Size 41cm * 28cm * 42cm / 16.14inch * 11.02inch * 16.54inch Loading Container 20GP: 553 cartons * 120 pcs = 66360 pcs40HQ: 1283 cartons * 120 pcs = 153960 pcs

Read more less