Search results for "Car Relay Tester"

1. Display: 1.77-inch TFT (160x128 DPI)2. External power supply: 12 or 24V power supply is provided through the vehicle battery3. It has short circuit protection function. If the load is too large, its internal circuit breaker will tripThis circuit breaker is not only a useful test tool, but also a safety measure to protect the tool from overload damage.4. When the circuit breaker trips, all other functions of the tool are still in normal working state, which means you can still detect the circuit and observe the voltage readings. When the circuit breaker trips, the tool cannot conduct battery current to the probe even if the power switch is pressed. Intentionally tripping the circuit breaker and using the tool for detection can be considered an additional precaution to prevent accidental pressing of the power switch.5. There are four modes for diagnosing electrical systems, which can be entered by pressing the "Mode Button" and switching in turn.6. DC voltage: When using this tool in this mode, the probe tip is contacted with the circuit, and the LCD display will then display the DC voltage value with an accuracy of 0.1V7. AC voltage: When using the tool in this mode, the probe tip is contacted with the circuit, and the LCD display will then display the voltage and frequency.8. Resistance Test: When using this tool in this mode, the probe tip is contacted with the circuit, and the LCD display will then display the resistance value between the tip and the auxiliary ground wire.9. Diode: In this mode, the probe tip contacts the positive electrode of the diode, connects the auxiliary ground wire to the negative electrode of the diode, the screen will display a forward voltage drop, indicating a forward bias. If the position of the probe tip and auxiliary ground wire are exchanged, the screen will not display a voltage, indicating a reverse bias.Voltage and Polarity Test: When the tool is in DC voltage mode, contact the probe tip with the forward circuit, the red LED will light up, the LCD display will display the voltage, the resolution is 0.1V, and a beep will sound10. If the probe tip is contacted with the negative circuit, the green LED will light up, the LCD display will display the voltage, the resolution is also 0.1V, and a beep will sound. If the probe tip is contacted with the open circuit circuit, neither LED will light up.11. Continuity Test: When the tool is in resistive mode, the probe tip is used to connect to the body ground wire or auxiliary ground wire, and conductivity tests can be performed on the wires and components that connect or disconnect the vehicles electrical system.12. When the probe tip is in contact with good grounding, the LCD display will display "0.0Ω" and the green LED will light up, making a beep sound. In other cases, the LCD display will only display the resistance value.13. If the resistance value is greater than 100 kiloohms, the LCD display will display "0L"14. Size: 225x45x35 mmSpecification: Package Weight One Package Weight 0.45kgs / 1.00lb One Package Size 28cm * 13cm * 6cm / 11.02inch * 5.12inch * 2.36inch Qty per Carton 10 Carton Weight 5.60kgs / 12.35lb Carton Size 30cm * 28cm * 32cm / 11.81inch * 11.02inch * 12.6inch Loading Container 20GP: 992 cartons * 10 pcs = 9920 pcs40HQ: 2303 cartons * 10 pcs = 23030 pcs

Read more less

1. This circuit tester will save you time and speed up the job, perfect for automotive use 2. Circuit Tester for 6-24V DC Systems Long Probe Continuity Tester 3. Used to Detect Power, Ground and find Shorts and Breaks in Wires 4. Handle Brightly Illuminates if Circuit is Good 5. Quickly check automotive headlights, taillights, turn signal circuits, faulty sockets, connections, fuses, broken wires and moreSpecification: General Material Metal, Plastic Voltage DC 6-24V Size 18.5*2.5*2.5cm Weight 89g Package Weight One Package Weight 0.14kgs / 0.30lb One Package Size 28.5cm * 11.5cm * 4.2cm / 11.22inch * 4.53inch * 1.65inch Qty per Carton 40 Carton Weight 6.50kgs / 14.33lb Carton Size 48cm * 44cm * 31cm / 18.9inch * 17.32inch * 12.2inch Loading Container 20GP: 407 cartons * 40 pcs = 16280 pcs40HQ: 945 cartons * 40 pcs = 37800 pcs

Read more less

1. Battery test: cold cranking amps, battery resistance, voltage, life analysis. 2. Engine system test: the change of battery system with the process of startup. 3. Charging system test: the charging system working state of the output. 4. Maximum load system test: the maximum load state of battery. 5. All car / truck lead-acid starting battery, including regular flooded,EFB,GEL,AGM spiral, AGM flat plat.Specification: Package Weight One Package Weight 0.33kgs / 0.73lb One Package Size 22cm * 16cm * 8cm / 8.66inch * 6.3inch * 3.15inch Qty per Carton 20 Carton Weight 8.00kgs / 17.64lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 20 pcs = 10440 pcs40HQ: 1212 cartons * 20 pcs = 24240 pcs

Read more less

The WOYO PL006 is a special sensor driver and diagnostic tool designed for offline testing of automotive components. It allows technicians to simulate working conditions and drive sensors or actuators directly, without requiring vehicle installation, making it ideal for automotive repair, diagnostics, and maintenance. Key Features: 1. Universal Sensor Driver: Support offline testing of various automotive sensors and actuators. 2. Simulates Real Working Conditions: Allows controlled testing of components such as throttle valves, EGR valves, turbo actuators, solenoid valves, etc. 3. Accurate Output Control: Adjustable voltage and signal output to match different sensor specifications. 4. Portable & Easy to Operate: Compact design with intuitive interface for fast testing, no complicated setup required. 5. Ideal for Automotive Workshops: Saves time by diagnosing component faults before installation on the vehicle. 6. Wide Application Range: Suitable for use in passenger cars, trucks, and other vehicles. Specification: 1. Output Type: Simulated voltage & control signals 2. Supported Components: Sensors, actuators, valves, solenoids, etc. 3. Power Supply: AC/DC power input or rechargeable battery 4. Application Scope: Automotive maintenance and diagnostics 5. Dimensions: Compact, portable structure Applications: 1. Offline testing of automotive sensors and actuators 2. Simulates real-world operating conditions for diagnostics 3. Prevents unnecessary component replacement 4. Speeds up workshop maintenance and fault detectionSpecification: Package Weight One Package Weight 0.36kgs / 0.79lb One Package Size 20cm * 16cm * 5cm / 7.87inch * 6.3inch * 1.97inch Qty per Carton 40 Carton Weight 15.00kgs / 33.07lb Carton Size 48cm * 42cm * 38cm / 18.9inch * 16.54inch * 14.96inch Loading Container 20GP: 348 cartons * 40 pcs = 13920 pcs40HQ: 808 cartons * 40 pcs = 32320 pcs

Read more less

1. Transparent observation window, convenient to observe the skipping situation, confirm whether it is normal, easy to use2. Grounding alligator clip, firm clamping, with rubber sleeve, comfortable to use3. Connect the high-pressure package connector, alloy material, sturdy and durable4. Improve work efficiency, safety and convenience, transparent observation window, strong alligator clip5. Power supply voltage: 12V6. Scope of application: automotive electricity measurement7. Weight: about 100gSpecification: Package Weight One Package Weight 0.13kgs / 0.28lb One Package Size 20cm * 12cm * 3cm / 7.87inch * 4.72inch * 1.18inch Qty per Carton 194 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 194 pcs = 34338 pcs40HQ: 412 cartons * 194 pcs = 79928 pcs

Read more less

1. Applicable batteries: all 12V lead-acid batteries2. Input voltage: 6V~25V3. Power consumption: 2.3 ma (average)4. RF: 33MHz5. Display: 9 LED indicators6. Protection: short circuit and overcurrent protection7. Lithium battery capacity: 750mAh8. Charging input: Solar panel type C port (5V)9. Monitor: Monochrome LCD screen with backlight10. Real-time display of battery health value, temperature, charging and voltage11. Battery starting system and charging system monitoring12. Data abnormality alarm to remind you of battery status in time13. It is powered by solar panels and has a Type-C charging interface. It consumes very little power and can be used for a week on a single charge.14. 433MHz precise transmission, real-time monitoring of battery status15. Intelligent vibration sensing, smart screen off and on, automatic switch, low power consumption16. Suitable for all 12V starting batteries, widely used in cars, trucks, yachts, and motorcyclesSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 14cm * 10cm * 6cm / 5.51inch * 3.94inch * 2.36inch Qty per Carton 45 Carton Weight 10.10kgs / 22.27lb Carton Size 44cm * 32cm * 32cm / 17.32inch * 12.6inch * 12.6inch Loading Container 20GP: 591 cartons * 45 pcs = 26595 pcs40HQ: 1373 cartons * 45 pcs = 61785 pcs

Read more less

1. Brand new and high quality 2. High switching capability 3. Relay is used for many car electronic applications to turn on/off almost any device 4. It is used when a device draws heavy amperage such as car alarms, remote starts, HID headlights, pop doors, trunk releases strobe lights, fog lights, stereos, fans, air horns, and much more 5. High 80A coil capacity- able to handle those high current applications with ease 6. Warning light will help monitor the current Specification: Package Weight One Package Weight 0.37kgs / 0.81lb One Package Size 14.5cm * 7cm * 4cm / 5.71inch * 2.76inch * 1.57inch Qty per Carton 50 Carton Weight 21.70kgs / 47.84lb Carton Size 42cm * 37cm * 17cm / 16.54inch * 14.57inch * 6.69inch Loading Container 20GP: 1009 cartons * 50 pcs = 50450 pcs40HQ: 2343 cartons * 50 pcs = 117150 pcs

Read more less

1. Wide range of applications: the circuit tester can be used to test conductivity, test voltage polarity, check lights, check motors, trace and locate short circuits, test for poor ground contact, etc2. Long test line: 4m/4.5m two specifications, allows you to easily test any electrical system3. Short-circuit protection: the unit has a short-circuit protection function, which can instantly detect poor ground contact4. Simple operation: after simply connecting the unit to the vehicles battery, the automotive technician can conduct positive and negative battery currents to the tip by cranking the power switch forward or backward5. Dual-lamp design for easy use at night6. LCD screen with high definition display, data at a glance7. Integrated 6-24V DC test kit: Do not use under AC voltage8. External power supply: 12V or 24V DC power supply through the vehicle battery9. Machine size: about 260 x 40 x 28mmOperating Instructions:1. Unfold the cables of the unit2. Place the red clip on the positive terminal of the vehicle battery3. Attach the black clip to the negative terminal of the vehicle batterySpecification: Package Weight One Package Weight 0.38kgs / 0.85lb One Package Size 28cm * 14cm * 5cm / 11.02inch * 5.51inch * 1.97inch Qty per Carton 50 Carton Weight 21.00kgs / 46.30lb Carton Size 51cm * 41cm * 46cm / 20.08inch * 16.14inch * 18.11inch Loading Container 20GP: 277 cartons * 50 pcs = 13850 pcs40HQ: 643 cartons * 50 pcs = 32150 pcs

Read more less

1. Probing at the OBDII connector is no longer required. 2. Easily access each of the 16 pins while scan tool communicating with vehicle. 3. LEDs to quickly indicate power or ground problems of OBDII connector. 4. Mimics the OBDII connector layout for quick reference. 5. Quick, safe and convenient access to chassis ground and power by this monitor. 6. Uses safety banana sockets that accept all types of 4mm banana plugs including those with safety sheaths.Specification: Package Weight One Package Weight 0.41kgs / 0.91lb One Package Size 23cm * 12cm * 7cm / 9.06inch * 4.72inch * 2.76inch Qty per Carton 40 Carton Weight 15.50kgs / 34.17lb Carton Size 46cm * 42cm * 38cm / 18.11inch * 16.54inch * 14.96inch Loading Container 20GP: 363 cartons * 40 pcs = 14520 pcs40HQ: 843 cartons * 40 pcs = 33720 pcs

Read more less

Features1. Support multi-language: English, Spanish, French, German, Italian, Japanese. 2. LCD display, clear, test results at a glance. 3. One-button operation, user-friendly layout, easy to use good touch and durable. 4. Test clip, high bite strength, more accurate test data, insulating material. 5. High quality printing, thermal printer in time clear report. Specification: Package Weight One Package Weight 0.76kgs / 1.66lb One Package Size 22cm * 16cm * 8cm / 8.66inch * 6.3inch * 3.15inch Qty per Carton 20 Carton Weight 17.60kgs / 38.80lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 20 pcs = 10440 pcs40HQ: 1212 cartons * 20 pcs = 24240 pcs

Read more less

1. Quick and easy test helps check the condition of the ignition system, it is safe and easy to operate. 2. Light and small size, very convenient to carry. 3. Using high quality material, it can withstand high voltage and current test, spark plug type of metal head, convenient docking, durable. Test method: 1. Extinguish the engine, then disassemble the spark plug coil. 2. Connected the black connector of tester to the spark plug. 3. Connected the metal end of tester to the spark plug coil. 4. Try to start the engine. 5. If the ignition circuit is complete, bulb will flash.Specification: General Model CNBJ-86982 Material Metal, Plastic Voltage DC 12V Size 10*3cm Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 19cm * 10cm * 3cm / 7.48inch * 3.94inch * 1.18inch Qty per Carton 100 Carton Weight 12.00kgs / 26.46lb Carton Size 40cm * 42cm * 44cm / 15.75inch * 16.54inch * 17.32inch Loading Container 20GP: 360 cartons * 100 pcs = 36000 pcs40HQ: 837 cartons * 100 pcs = 83700 pcs

Read more less

1. Working voltage: 12-24V2. Working current: 80ma3. Overload protection: 8A4. Cable length: 4M5. Humanized dual LED design, easy to use at night or in low-light environments6. When the probe touches the positive circuit, the device will light up red7. When the probe touches the negative circuit, the device will light up green8. Functions: component activation, continuity test, ground detection, tracking and positioning short circuit, positive and negative pole detection9. Weight: about 210g10. Size: 135x35x20mm (only for the main body)Specification: Package Weight One Package Weight 0.28kgs / 0.63lb One Package Size 25cm * 9cm * 5cm / 9.84inch * 3.54inch * 1.97inch Qty per Carton 56 Carton Weight 16.20kgs / 35.71lb Carton Size 52cm * 35cm * 39cm / 20.47inch * 13.78inch * 15.35inch Loading Container 20GP: 375 cartons * 56 pcs = 21000 pcs40HQ: 872 cartons * 56 pcs = 48832 pcs

Read more less