Search results for "industrial electronics"

Features1. PoE UPS Base For CM4: Uninterruptible power supply, powering the CM4 while recharging 2. Connecting With Compute Module 4: Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header. Suitable For Compute Module 4 Lite/EMMC Series Module 3. Uninterruptible Power: It is able to charge the batteries and provide power output for the system at the same time from external power supply. Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble 4. Multi Power Supply Options: - Three external power supply options: USB interface, wide voltage DC, and PoE - When connected to the external power supply, the system will be powered and the battery will be charged at the same time, and the battery will be in a disconnected status after being fully charged, so as to avoid battery life damaging caused by frequently charging and discharging - When the external power supply is insufficient, the battery will provide power output together with the external power supply at the same time to ensure system normal operation - When the external power supply is connected, the system will keep running normally even when the battery fails or is taken out. When the external power supply is disconnected, it will automatically switch over to batteries output without interrupting the system operation 5. Safe And Stable Circuit Design: Protection circuits for over charge/discharge, over current, short circuit, and reverse-proof along with the standalone resettable fuse for each battery, more safe and stable 6. Real Time Monitoring: Monitoring the batteries voltage, current, power, and remaining capacity via I2C. (When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss) Note: The 18650 batteries are not includedSpecifications1. CM4 socket: Suitable for all variants of Compute Module 4 2. Battery support: Parallel 18650 Li-ion battery x 3 (NOT included) 3. Networking: Gigabit Ethernet RJ45 connector, integrates 802.3af-compliant PoE circuit (5V/2.5A) 4. USB: USB 2.0 Type A ?? 4 5. Connector: - Raspberry Pi 40PIN GPIO header - M.2 M KEY slot, for connecting NVME SSD, or communication module with PCIE M.2 M KEY interface 6. Display: MIPI DSI port x 1 (22pin 0.5mm FPC connector) 7. Camera: MIPI CSI-2 port x 2 (22pin 0.5mm FPC connector) 8. Video: HDMI x 2, supports 4K 30fps output 9. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 10. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 11. Fan: Allows speed adjustment and measurement, 5V / 12V 12. Indicator: - M.2 status LED - CM4 status LED 13. Power input7-36V 14. Dimensions: 175.0 x 108.0mmSpecification: Package Weight One Package Weight 0.17kgs / 0.37lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 35cm * 37cm / 20.47inch * 13.78inch * 14.57inch Loading Container 20GP: 396 cartons * 100 pcs = 39600 pcs40HQ: 919 cartons * 100 pcs = 91900 pcs

Read more less

About The Product1. LINEPAUDIO A967 Passive PreAmp Active Speak Volume Two-Channel Controller is small and compact, applicable to use with active speaker or PostAmp, supports full-balanced or single-ended signal I/O, equipped with a switch for easily switching I/O signal. 2. Infinitely picky about the sound quality, infinitely tolerant on music. Passive PreAmp Volume Controller makes the desktop simple. 3. Small size but great wisdom, LINEPAUDIO A967 is tiny but with a complete set of common interfaces, supports full-balanced audio signal regulation and single-ended audio signal regulation, and switches I/O signal. 4. Suitable for the decoder and speaker without volume regulation, with the balanced I/O, RCA I/O architecture and switch function enabled. Its PreAmp will not cause a loss of signal source. In general, the audio source signals out of the decoder reproduces the original signals. The large dynamic range will not cause a quality loss, but keep the original signal source intact. 5. The preferred choice of active speaker, more and more music fans are not satisfied with the sound quality performance of common multimedia speakers, but rather select professional active monitor speakers. But such speakers generally don't have a volume regulation knob, but have to use with PreAmp. Most active monitor headphones are used for the desktop near-field listening, but a common HiFi PreAmp is large and occupies a large area. Moreover, most are concerned about whether the timbre of PreAmp matches the speaker or not, whether the sound effect is ideal or not. 6. But from now on, LINEPAUDIO A967 Two-Channel Volume Controller perfectly addresses the above two concerns, LINEPAUDIO A967 is small and compact, the internal circuit architecture design will not cause a loss of sound quality, the internal power amplifier of active speaker is enough to drive the speaker, so that you can hear the most genuine timbre and quality of the speaker, free from the need of choosing a suitable PreAmp.Features1. Input/Output impedance: 10Kohms - 50Kohms. 2. Two-channel I/O switch, RCA and Balanced XRL I/O. 3. Input: RCA / Balanced XLR (switch). 4. Output: RCA / Balanced XLR (switch).Specification: General Model A967 Material Metal Size 145*65*43mm Weight 314g Package Weight One Package Weight 0.46kgs / 1.00lb One Package Size 20cm * 18cm * 5.5cm / 7.87inch * 7.09inch * 2.17inch Qty per Carton 20 Carton Weight 9.13kgs / 20.13lb Carton Size 42cm * 38cm * 30cm / 16.54inch * 14.96inch * 11.81inch Loading Container 20GP: 556 cartons * 20 pcs = 11120 pcs40HQ: 1292 cartons * 20 pcs = 25840 pcs

Read more less

1. Weather forecast broadcast radio, support AM, FM, WB signal, can receive news and other channels2. 0.3W solar panel, manual power generation, multiple charging methods: solar energy, manual charging, USB port charging three charging methods3. LED torch lighting, radio for emergency needs can bring brightness to people in a dark environment4. FM radio function, strong radio signal, automatic radio reception, high sensitivity, and self-adaptive application, more radio stations, clear sound5. FM/AM/US Weather Band (optional) multi-band receiver6. Design 360-degree rod antenna, high sensitivity in each band7. 40mm 8 ohm 1 watt speaker, the volume is loud and clear8. There are corresponding indicator lights when tuning and charging, giving users a clear reminder9. Electronic tuning search platform, easy to operate, long switch life10. 3 LED lamp beads, in a dark environment, can bring bright11. With emergency alarm function, it can bring alarm sound to people in emergency12. It has the function of power pack, which is convenient for users to charge low-power phones outdoors13. ABS plastic material and spray rubber oil, with the characteristics of anti-dirty and wear-resistant14. Waterproof level: IPX315. Battery specification: 1200mAh16. Power supply mode: USB charging / built-in lithium battery / solar energy / hand power generation17. External charging output current: 1000mA18. Channel selection method: manual19. Working voltage: 2.7V-4.2V20. Signal to noise ratio: FM: 32dB, AM: 20dB21. Band type: multi-band22. Radio tuning method: Pointer type23. Receiving frequency range: FM: 87-108MHZ, AM: 520-1710KHZ, NOAA: 162.450-162.550 MHZ24. Encoding chip type: DSP25. Static current: 60 Vian26. Rated current: 400mA27. Rated power: 0.5W28. Receiving sensitivity: FM: 8dB, AM: 86dB29. Impedance: 32 ohms30. Material: ABS31. Audio channel: Dual channel32. Screen size: 31x3mm33. Dimensions: 128 x 60 x 45mm34. Weight: 238gSpecification: General Certificate CE Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 16cm * 8cm * 6cm / 6.3inch * 3.15inch * 2.36inch Qty per Carton 60 Carton Weight 18.00kgs / 39.68lb Carton Size 48cm * 32cm * 30cm / 18.9inch * 12.6inch * 11.81inch Loading Container 20GP: 578 cartons * 60 pcs = 34680 pcs40HQ: 1343 cartons * 60 pcs = 80580 pcs

Read more less

About The ProductThe Core1262-868M is a LoRa core module which incorporates new-generation SX1262 chip. It has featuress including mini size, long range transmission, high anti-interference capability, and so on. The module uses EU868 band, combined with LoRa gateway, it can be connected to servers like TTN server to build LoRa network. 1. New-generation SX1262, higher power efficiency and longer transmission distance than the traditional SX1278 2. EU868 band, combined with LoRa gateway, quick connection to cloud servers like TTN server 3. Comes with rich development resources and manual (examples for STM32, Raspberry Pi Pico)Specifications1. RF chip: SX1262 2. Frequency range: EU868 (863~870MHz) 3. Modulation: LoRa/(G)FSK 4. Data rate: 0.018~62.5Kbps (LoRa), 0.6~300Kbps ((G)FSK) 5. Emit power: More than 14dBm 3.3V 6. Spreadind factor: SF5 ~ SF12 7. Operating voltage: 3.3V 8. Module power consumption: Emitting current: 45mA 14dBm; receiving current: 5.3mA 125KHz 9. Communication bus: SPI 10. Operating temperature: -40 ~ 85 degree C 11. Connector: Castellated edge / solder holes 12. Dimensions: 21.00 x 52.00mmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 1000 Carton Weight 9.00kgs / 19.84lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 1000 pcs = 328000 pcs40HQ: 763 cartons * 1000 pcs = 763000 pcs

Read more less

1. The design and modification are based on the shape and structure of the for Raspberry Pi. The appearance is similar to the structure of the for Raspberry Pi motherboard. The 2 x 20 expansion ports next to it have reserved pins that match the for Raspberry Pi GPIO.2. For Raspberry Pi expansion board3. TF card holder, self-elastic card holder, easy to pull out the card4. Chip: ESP32-WAROVER5. Relay: HFD3 5V 2A6. RTC: PCF85637. Type-c input: 5V8. Purpose: IoT programming development9. Power: 0.5W10. Rated voltage: 5v11. DC-DC input: 5-12V12. Extension pin header: 2.54 2 x 2013. Double-layer USB interface: I2C/UART function respectively14. Double-layer USB expansion port: output 5V/1A15. Button: RST button, custom button16. USB output: 5V 1A17. Dimensions: 99.7 x 62.5 x 31.2mmSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 12cm * 8cm * 6cm / 4.72inch * 3.15inch * 2.36inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs40HQ: 412 cartons * 146 pcs = 60152 pcs

Read more less

Overview1. Onboard audio power amplifier LM3862. Audio signal gain up to 2003. Adjustable accuracy4. Signal output indicatorSpecifications1. Mic sensitivity: 52dB2. Frequency range: 50Hz ~ 20KHz3. Power: 3.3V ~ 5.3V4. Mounting holes size: 2.0mmApplications1. Audio amplifier2. Ambient sound detection3. Sound level detection (unable to get exact dB value)How to UseIn the case of working with a MCU:1. VCC: 3.3V ~ 5.3V2. GND: Power supply ground3. AOUT: MCU.IO (analog output)4. DOUT: MCU.IO (digital output)Package Contents1. Sound Sensor x12. 4-pin custom connector jumper wire x1Specification: Package Weight One Package Weight 0.02kgs / 0.03lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs40HQ: 661 cartons * 6240 pcs = 4124640 pcs

Read more less

Overview1. This is a small 1D/2D codes reader, by using the intelligent image recognition algorithm, it will decode the barcode or 2D code on paper or screen, fast and accurately.2. Through the onboard USB and UART interface, it can be directly plugged into a computer, or be easily integrated to kinds of devices due to its small form factor.Features1. Easy to use, requires no knowledges of image recognition2. Decodes various common 1D/2D codes such as Barcode, QR code etc.3. Onboard micro USB and UART serial port, allows to connect with computers or embedded devices4. Configurable via scanning configuration code5. Onboard light source, works in the darkSpecifications1. Operating voltage: 5V2. Operating current: 135mA (scanning), 58mA (standby), 2mA (sleep)3. Operating temperature: 0°C~60°C4. Operating humidity: 5%~95% (Non-condensing)5. Communication interface: UART, USB6. Decodes 1D codes: Codebar, Code 11, Code 39/Code 93, UPC/EAN, Code 128/EAN128, Interleaved 2 of 5, Matrix 2 of 5, MSI Code, Industrial 2 of 5, GS1 Databar(RSS)7. Decodes 2D codes: QR code, Data Matrix, PDF4178. Light source: white9. Scan angels: roll 360°, skew ±65°, pitch ±60°10. Field of view: 28° (horizontal), 21.5° (vertical)11. Dimension: 53.3mm x 21.4mm12. Package contents:- Barcode Scanner Module x1- USB type A plug to micro B plug cable x1- PH2.0 4Pin x1Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 8cm * 4cm * 2cm / 3.15inch * 1.57inch * 0.79inch Qty per Carton 1400 Carton Weight 134.40kgs / 296.30lb Carton Size 56cm * 40cm * 40cm / 22.05inch * 15.75inch * 15.75inch Loading Container 20GP: 297 cartons * 1400 pcs = 415800 pcs40HQ: 690 cartons * 1400 pcs = 966000 pcs

Read more less

Specifications1. Product: MG90S Servo2. Torque: 2.0kg/cm(4.8V), 2.8kg/cm(6V)3. Speed: 0.11s/60°(4.8V), 0.09s/60°(6V)4. Rotate angle: 180°5. Operating voltage: 4.8 ~ 6V6. Gear: metal7. Dead band: 5us8. Weight: 12.2g9. Dimension: 22.8mm × 12.2mm × 28.5mmSpecification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 7cm * 4cm * 6cm / 2.76inch * 1.57inch * 2.36inch Qty per Carton 480 Carton Weight 15.00kgs / 33.07lb Carton Size 56cm * 40cm * 36cm / 22.05inch * 15.75inch * 14.17inch Loading Container 20GP: 330 cartons * 480 pcs = 158400 pcs40HQ: 767 cartons * 480 pcs = 368160 pcs

Read more less

1. Stall torque: 30kg.cm @ 12V2. Rotation angle: 360 degrees (0 ~ 4095)3. Position sensor resolution: 360 degrees / 40964. Mechanical limit angle: unlimited5. Operating voltage: 6V ~ 12.6V6. Gear type: high-precision metal gears7. No-load speed: 0.222 sec / 60 degrees (45 RPM) @ 12V 0.192 sec /8. Encoder type: 360-degree magnetic encoder9. ID range: 0 ~ 25310. Baud rate: 38400bps ~ 1Mbps (default 1Mbps)11. Feedback: position, Load, Speed, and12. Input voltage13. No-load current: 180mA14. Stall current: 2.7A15. Kt constant: 11kg.cm/A16. The servo can provide various feedback information: position, speed, torque lock, operating mode (servo mode, servo motor mode, etc.), suitable for advanced projects requiring closed-loop automatic control.17. Can be used to build quadruped, hexapod, robotic arm, and other robot projects requiring multiple servos (this product provides the open-source structural model of the robot dog shown in the figure below).18. Controlled via serial bus, allowing up to 253 servos to be connected in series simultaneously.19. Uses a 12-bit high-precision magnetic encoder angle sensor. Compared to potentiometers, the angle is increased to 360 degrees, and the resolution is increased by 4 times. Due to the gap between the magnetic encoder element and the radial magnet, there is no friction, effectively extending the servo's lifespan.20. Acceleration start/stop function: speed and acceleration values ??can be set for smoother motion.21. The shell uses a higher-strength engineering plastic shell and a dual-axis low-profile shell structure design, optimizing the distance between the planes where the dual-axis servo discs are located, making the overall structure more compact and the product appearance more aesthetically pleasing.22. The servo motor can provide real-time feedback on position, load, speed, and input voltage, allowing for constant monitoring.23. We have open-sourced the web-based control example for the servo motor driver board and provided a secondary development tutorial, which can be directly used for remote setting and control of the servo motor. We also provide 3D models for quick project development.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 18.40kgs / 40.56lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs40HQ: 1137 cartons * 144 pcs = 163728 pcs

Read more less

1. Capable of charging 2 batteries simultaneously. 2. Each of the two battery slots monitors and charges independently. 3. Optimized charging design for IMR batteries. 4. Integrated LCD panel clearly displays charging parameters and progress. 5. Two conveniently located side buttons allow easy selection of specific battery types and charging parameters. 6. Intelligent circuitry detects the battery type and status before entering automatic charge mode (CC, CV, dV/dt). 7. Automatically detects battery power status and selects the appropriate voltage and charge mode (with the exception of LiFePO4 batteries which require manual selection). 8. Compatible with LiFePO4 batteries. 9. Compatible with small capacity batteries. 10. Automatically stops charging when complete. 11. Features over-charge prevention to protect batteries. 12. Features temperature monitoring to prevent overheating. 13. Made from durable ABS (fire retardant / flame resistant). 14. Features reverse polarity protection. 15. Designed for optimal heat dissipation. 16. Compatible with Li-ion / IMR / LiFePO4: 10440, 14500, 16340 (RCR123), 17500, 17670, 18350, 18490, 18650, 22650, 26650, Ni-MH and Ni-Cd (AA, AAA, AAAA, C) rechargeable batteries (Note: All batteries are not included). 17. Input voltage: - AC 100-240V 50/60 Hz 0.25A (MAX) - DC 12V 1A 18. Output voltage: 4.2V +/- 1% / 3.7V +/- 1% / 1.48V +/- 1% 19. Output current: 500mA x 2 20. Certified by RoHS, CE, FCC, CEC.Specification: General Product Material ABS Product Size 14.4x7.5x3.6cm Product Weight 162g Charger Parameters Model D2 Input Voltage AC 100-240V 50/60Hz Charger Plug US Plug Package Weight One Package Weight 0.32kgs / 0.70lb One Package Size 17cm * 13.5cm * 5cm / 6.69inch * 5.31inch * 1.97inch Qty per Carton 40 Carton Weight 13.20kgs / 29.10lb Carton Size 52cm * 29cm * 36cm / 20.47inch * 11.42inch * 14.17inch Loading Container 20GP: 491 cartons * 40 pcs = 19640 pcs40HQ: 1140 cartons * 40 pcs = 45600 pcs

Read more less

1. Non-contact speed: 99,999 RPM2. Contact speed: 20,000 RPM3. Contact line speed: 99,999 inches/min4. Contact line speed: 99,999 feet/min5. Contact line travel speed: 99,999 meters/min6. Power supply: 1200 mAh lithium battery7. This dual-purpose device features a removable contact probe shaft holder for easy operation, allowing for both contact and non-contact measurement, providing greater flexibility.8. The shaft holder utilizes a dual-bearing design for more stable rotation and more accurate measurement results.9. Utilizing photodiode and laser tube sensors, the device offers high sensitivity and strong anti-interference capabilities.10. Equipped with photoelectric speed measurement mode, contact speed mode, contact line mode, and maximum, minimum, and average measurement modes.11. This product utilizes a two-shot injection molded, non-slip soft packaging process to effectively reduce hand fatigue after prolonged use.12. Real-time data communication and processing with a computer via USB cable. Displays real-time data tables and graphs.13. USB port for real-time data communication and processing with a computer.14. Weight: approximately 140g15. Dimensions: 184x60x33mmSpecification: Package Weight One Package Weight 0.33kgs / 0.74lb One Package Size 24cm * 13cm * 6cm / 9.45inch * 5.12inch * 2.36inch Qty per Carton 40 Carton Weight 14.30kgs / 31.53lb Carton Size 49cm * 26cm * 48cm / 19.29inch * 10.24inch * 18.9inch Loading Container 20GP: 436 cartons * 40 pcs = 17440 pcs40HQ: 1012 cartons * 40 pcs = 40480 pcs

Read more less

1. Highest real-time sampling rate: 1Msps2. Accuracy: 12Bit3. Sampling buffer depth: 1024 bytes4. Analog band width: 0-200KHz5. Vertical sensitivity: 5mV / Div – 20V / Div (progressive in 1-2-5 way)6. Adjustable vertical displacement with instructions7. Input impedance: 1MΩ8. Maximum input voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)9. Coupling methods include: DC / AC / GND10. Horizontal time base range: 10μs / Div – 50s / Div (progressive in 1-2-5)11. Trigger mode: With automatic, regular and single shot, easy to capture instantaneous waveform12. Trigger on rising or falling edge13. Trigger level position is adjustable, with indication14. Observe waveform before trigger (negative delay)15. Freeze waveform display at any time (HOLD function)16. Signal source: Comes with 1KHz /3.3V square wave test17. The parameters that can be displayed are: frequency, period, pulse width, duty cycle, maximum value, minimum value, average value, peak-to-peak value, and effective value.18. Save / recall waveform, the waveform does not disappear after shutdown19. Packing list:20. 15001K (SMD components are soldered)Specification: Package Weight One Package Weight 0.18kgs / 0.39lb One Package Size 20cm * 13cm * 5cm / 7.87inch * 5.12inch * 1.97inch Qty per Carton 40 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 27cm * 42cm / 20.47inch * 10.63inch * 16.54inch Loading Container 20GP: 452 cartons * 40 pcs = 18080 pcs40HQ: 1049 cartons * 40 pcs = 41960 pcs

Read more less