Search results for "Remote Control Adapter"
-
WAVESHARE WAVESHARE RP2350 Industrial Control Board 6-Channel Relay Module, Based On RP2350 Microcontroller, Supports Wxternal Interfaces RS485 And Pico, With Wi-Fi Module
1. Based on the RP2350 main controller, it supports external interfaces such as RS485 and Pico, and features built-in power isolation and optocoupler isolation protection circuits for enhanced safety, stability, and reliability.2. Unique dual-core, dual-architecture design, equipped with a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.3. Equipped with a Raspberry Pi Radio Module 2, supporting Wi-Fi 4 wireless network and Bluetooth 5.2 (Wi-Fi module version only).4. Built-in 520KB SRAM and 16MB on-chip Flash. Uses a Type-C interface, eliminating concerns about correct plug orientation.5. Uses high-quality relays, allowing connection to loads: 10A 250V AC or 10A 30V DC.6. On-board isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.7. On-board Pico-compatible interface, compatible with some Raspberry Pi Pico expansion boards, facilitating the expansion of functions such as RTC, CAN, RS232, LoRa, and sensors.8. On-board terminal block power supply interface, supporting a wide voltage range of 7V~36V, convenient for industrial power supply use.9. On-board optocoupler isolation to prevent high-voltage circuits connected to the relay from interfering with the control chip.10. On-board digital isolation to prevent external signals from interfering with the control chip.11. On-board integrated power isolation provides a stable isolated voltage; no additional power supply is required for the isolated end.12. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.13. On-board power and RS485 transceiver indicator lights, buzzer, and RGB LEDs for easy monitoring of the devices operating status.14. Rail-mounted ABS protective casing for easy installation and safer use.15. USB 1.1 host and device support.16. Supports low-power sleep and hibernation modes.17. Controllable via USB. Identified as a mass storage device for drag-and-drop program downloading18. 34 multi-functional GPIO pins19. 1 HSTX pin, 2 I2C pins, 2 UART pins, 8 12-bit ADC pins, and 24 controllable PWM channels20. 12 programmable I/O (PIO) state machines for custom peripheral supportProduct parameters:1. Power supply voltage: 5V2. Functions: device power supply, USB communication, and firmware download, etc.3. Interface type: terminal block4. Direction control: hardware automatically detects and controls data transmission direction5. Interface protection: provides TVS tube protection, surge and electrostatic protection6. Matching resistor: default NC, 120R matching resistor reserved, can be enabled with a jumper cap7. Contact type: one normally open, one normally closed8. Isolation type: optocoupler isolation9. RGB: colorful cool LED beads, customizable display colors10. PWR: power indicator light, lights up red when USB is connected and voltage is detected11. TXD: transmit indicator light, lights up green when data is sent from the RS485 interface12. RXD: receive indicator light, lights up blue when data is received from the RS485 interface13. Power supply range: 7V-36V14. Casing: rail-mounted ABS protective casing15. Dimensions: 145 x 90 x 40 mmSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 17cm * 12cm * 6cm / 6.69inch * 4.72inch * 2.36inch Qty per Carton 30 Carton Weight 3.20kgs / 7.05lb Carton Size 36cm * 38cm * 32cm / 14.17inch * 14.96inch * 12.6inch Loading Container 20GP: 609 cartons * 30 pcs = 18270 pcs40HQ: 1414 cartons * 30 pcs = 42420 pcs
£31.99
-
Aluminum Shell Cylindrical Display Stand Digital Magnetic Security System Burglar Alarm / Anti-theft Alarm Display Holder for iPhone & iPod & iPad with 8 Pin Port, Cylindrical 8 Pin
1. Security system is used to secure consumer electronic gadgets in exhibition or store open display against theft. This innovative system is easy to operate and is able to blend easily in any exhibits layout. 2. Charging function: The stand alone security device built in lithium battery, if the power outages that is also with security function. One set of external 5V power adapter, and it can be supply products for charging. 3. Alarming function: - Contactor alarm: When we pull up the contactor and back of parts VBH adhesive, then it will immediately issued warming sound. - Cutting cable alarm: When the alarm cable was pulled apart or cut off, then it will immediately issued warming sound. 4. Remote control function: The infrared remote control, anti-interference ability, sensitivity strong. 5. Material: Aluminum alloy 6. Alarm volume: 95-110dB 7. Input voltage: 110-220V 8. Charging voltage: DC 5V 1A 9. Unlock: Infrared remote controlSpecification: General Compatible with Apple: iPhone 12, iPhone 12 Pro, iPhone 12 mini, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 11, iPhone XS, iPhone XS Max, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5S, iPhone 5C Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 14cm * 9cm * 9cm / 5.51inch * 3.54inch * 3.54inch Qty per Carton 40 Carton Weight 8.00kgs / 17.64lb Carton Size 47cm * 36cm * 30cm / 18.5inch * 14.17inch * 11.81inch Loading Container 20GP: 525 cartons * 40 pcs = 21000 pcs40HQ: 1219 cartons * 40 pcs = 48760 pcs
£14.99
-
2.5 inch Sonic Car Universal Exhaust Pipe Tail Throat, 2.5 inch
1. T-304 stainless steel, with mandrel bending 2. Electric safety switch kit-made of light CNC machined and anodized T-6061 aircraft aluminum alloy 3. High-performance racing specifications. Proven design Dyno can instantly increase 10-20 horsepower 4. Radical deep sound while ensuring smooth exhaust 5. The electronically controlled exhaust valve flows out; just use the button on the remote control 6. TIG welding type CNC machine tool flange, with pressure resistance and corrosion resistance 7. Increase engine output and efficiency 8. Inlet/main pipe diameter 2.5 inches (63mm) 9. The package includes: Flange gasket x 2 3.8M wire harness x 1 Aluminum V clip x 1 10 inch stainless steel tube x 1 Wireless remote control x 1 Stainless steel flange adapter x 1 45 degree stainless steel elbow sewage pipe x 1 Fixing bolt with lock washer and nut x 1 Electric exhaust cutting kit with gear drive motor x 1Specification: Package Weight One Package Weight 2.31kgs / 5.10lb One Package Size 30cm * 26cm * 10cm / 11.81inch * 10.24inch * 3.94inch Qty per Carton 6 Carton Weight 15.33kgs / 33.80lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 6 pcs = 3132 pcs40HQ: 1212 cartons * 6 pcs = 7272 pcs
£48.99
-
S261/J16 Home Mini HD 1080P Portable LED Projector, Support TF Card / AV / U Disk, US Plug, EU Plug, UK Plug, AU Plug
Details:1. Body weight: 290 grams2. Dimensions: 131x86x58 mm3. Imaging technology: TFT LCD4. Contrast ratio: 800:15. Physical resolution: 320x2406. Support resolution: 1920x10807. Light source: LED8. Projection distance: 1.2-3 meters9. Projection ratio: 1.6:110. Screen ratio: 4:3 16:911. Color: 16.7 million colors12. Applicable scenarios: home, outdoor camping, party, etc.13. Contains: projector host + remote control + power adapter (12V-1.5A) + three-in-one AV cable + manual + packing box14. Function: can read U disk, mobile hard disk, TF card, AV connected to DVD, set-top box, connect to camera, game console, laptop, desktop computer15. Support documents: multimedia documents (music, pictures, videos, TXT)16. Support languages: 23 languages including Chinese and English17. Note: the computer with HDMI interface is connected with HDMI cable (HDMI HD cable needs to be purchased separately). This mini projector is only suitable for home use and not for office teaching.Features:1. Beautiful and practical, light and portable2. Built-in speaker3. 20/40/80 inch screen can be adjusted4. Multi-scene application5. Can be connected to a variety of equipment, easy to use6. Configure the lens, adjust the focus manuallySpecification: Package Weight One Package Weight 0.60kgs / 1.33lb One Package Size 20cm * 20cm * 10cm / 7.87inch * 7.87inch * 3.94inch Qty per Carton 10 Carton Weight 7.50kgs / 16.53lb Carton Size 22cm * 42cm * 52cm / 8.66inch * 16.54inch * 20.47inch Loading Container 20GP: 555 cartons * 10 pcs = 5550 pcs40HQ: 1288 cartons * 10 pcs = 12880 pcs
£28.99 - £31.99
-
NK-H31 8K 3 in 1 Out HDMI Switcher for Xbox PS4 PS5 Roku UHD TV Monitor Projector, NK-H31
1. Convert three HDMI inputs to one HDMI video output.2. Input and output resolution: up to 8Kp60.3. HDMI 3 port allows to connect 3 HDMI devices to 1 monitor or projector. Simply use the 8K HDMI switch panel buttons or IR remote or external controller to switch signals, no need to plug and unplug cables. (Note: Please use a super high-speed HDMI cable to transmit 8K video, and please turn on the HDMI switch selector when using it)4. UHD 8K HDMI switch: HDMI switch selector supports Ultra HD 8K@60Hz/4K@120Hz/3D/1080F and forward compatibility, supports HDCP2.3 LPCM7.1, DTS-HD.Dolbv-True HD.DTS-X, Dolby. Screen switching is smooth without distortion, bringing you a visual feast and a wonderful gaming experience.4. The switch is equipped with an infrared remote control and a wired desktop controller. An infrared remote control makes swapping video sources possible without leaving the comfort of your couch. And it can hide a lot of machines and cables, making the desk more tidy. The controller can support the extension distance of 3.5mm male and female extension cables5. 8K HDMI switch and remote support plug and play, no additional driver required. Provide high-bandwidth 48Gbps data transmission, and the input and output ultra-high-speed HDMI cables can be up to 5m in length. If it cannot work normally, please connect an external 5V1A power adapter.6. The 8K 60Hz HDMI switch works with most HDMI integrated devices, such as Amazon Fire TV, Apple TV, Set-top Box/IPTV, LCD TV, DVD player, Blu-ray player PS5, Xbox game console. Roku and other devices that support HDMI. It is suitable for various occasions such as corporate offices, meeting rooms, home theaters, and playing games.Specification:1. HDMI resolution: 8K60HZ/4K120HZ/1080p/1080i/720p/576p/480p2. Input/Output TMDS signal: 0.5~1.5Volts p-p(TTL)3. Input/Output DDC signal: 5Volts p-p (TTL)4. Input cable distance: less than 15m AWG26 HDMI standard cable5. Output cable distance: less than 20m AWG26 HDMI standard cable6. Max working current: 500mA7. Operating Temperature range: -15 to +55 degree Celsius8. Operating Humidity range: 5 to 90%RH (No 9. Condensation)9. Dimension: 134x57x15mm10. Weight: 135gSpecification: Package Weight One Package Weight 0.23kgs / 0.52lb One Package Size 17.5cm * 6cm * 5.5cm / 6.89inch * 2.36inch * 2.17inch Qty per Carton 60 Carton Weight 15.00kgs / 33.07lb Carton Size 42cm * 32cm * 26cm / 16.54inch * 12.6inch * 10.24inch Loading Container 20GP: 763 cartons * 60 pcs = 45780 pcs40HQ: 1771 cartons * 60 pcs = 106260 pcs
£14.99
-
YONGNUO YONGNUO YN622N-KIT i-TTL Wireless Flash Trigger Controller + Transceiver Kit for Nikon Camera, for Nikon
Compatible Camera ListNikon: D70, D70S, D80, D90, D200, D300S, D600, D700, D800, D3000, D3100, D3200, D5000, D5100, D5200, D5300, D7000, D7100Functions1. LCD screen display, multi-buttons quick operation 2. The firmware can be upgraded through the USB interface 3. Support wireless shutter release function 4. The focal length(zoom)of the A/B/C three groups of flash can be adjusted separately 5. Equipped with the AF focus assist light (can be disabled) 6. Grouping flash mode: i-TTL/Manual flash/Super sync 7. Supporting mixed use of the A/B/C three groups of flashes with i-TTL, Manual flash, or Super sync flash mode 8. The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately 9. Shutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s 10. Support exposure compensation, flash value lock function(FVL) 11. Support simulate (modeling) flash, red-eye reduction flash 12. Support the flash zooming (auto) 13. Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows 14. Settings saved automatically 15. The flash sync signal can be input through the PC port 16. Support the basic flash trigger (max sync speed is 1/250s) of standard hot shoe (non Nikon body)Specification: General Wireless Triggering Distance 100m (2.4G wireless) Flash Mode TTL, MULTI, GR Flash Sync Speed 1/8000s SYNC Mode front-curtain sync, rear-curtain sync, Hi-speed sync Channels 7 Groups A, B, C Standby Time 120h External Interface Hot shoe, PC port Size 89.5x53x39mm Weight 82g Power Power Supply 2 x AA Battery (not included) Package Include Package Contents Remote Control x 1 Transmitter x 1 Cable x 2 Package Weight One Package Weight 0.30kgs / 0.65lb One Package Size 14cm * 14.5cm * 5cm / 5.51inch * 5.71inch * 1.97inch Qty per Carton 40 Carton Weight 12.00kgs / 26.46lb Carton Size 52cm * 30cm * 30cm / 20.47inch * 11.81inch * 11.81inch Loading Container 20GP: 569 cartons * 40 pcs = 22760 pcs40HQ: 1322 cartons * 40 pcs = 52880 pcs
£67.99
-
TELESIN TELESIN P1-MP-10 Magnetic Camera Shoot Hand Grip Bluetooth Remote Control Mobile Phone Camera Handle, P1-MP-10 White, P1-MP-10 Black
1. Power supply: contains CR1632 button battery2. Material: ABS+PC+aluminum alloy3. Magnetic ring installation: please stick the magnetic ring on the back of the smooth mobile phone case and let it stand for 2 hours before use4. Packing list: photography handle x 1, magnetic ring x 1, cleaning bag x 1, mobile phone protection rope x 1, battery removal tool x 1, instruction manual x 15. Size: about 12.5 x 8 x 3.8cm6. Weight: about 109gFeatures:1. Super stable holding state, 9mm scientific finger spacing2. Fits the natural hand shape, non-slip and more stable, and can be positioned comfortably even in blind operation3. Long-lasting stability, no blur, 45mm soothing curvature4. Can be operated with one hand, two-stage shutter/zoom lever/mode switch/front and rear mirror switch/camera quick start5. Strong suction, stable and not easy to fall off6. Switch between horizontal and vertical composition at will, and record short videos at any time7. 10m remote control, unlimited shooting8. Double-sided magnetic suction, magnetic beauty fill light can be superimposed on the back (not included)9. ??Travel with you, easy to hold10. Silicone magnetic veneer to prevent scratches on the phone11. With mobile phone case lanyard, double insuranceSpecification: Package Weight One Package Weight 0.13kgs / 0.30lb One Package Size 14cm * 11cm * 7cm / 5.51inch * 4.33inch * 2.76inch Qty per Carton 70 Carton Weight 10.20kgs / 22.49lb Carton Size 44cm * 38cm * 32cm / 17.32inch * 14.96inch * 12.6inch Loading Container 20GP: 498 cartons * 70 pcs = 34860 pcs40HQ: 1157 cartons * 70 pcs = 80990 pcs
£18.99
-
315MHZ 3-button Wireless Copy Style Electric Barrier Garage Door Battery Car Key Remote Controller, 315MHZ 3-button
1. Chips that can be copied: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers) , 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200\HCS201 (part of the code), HCS300\HCS301 (part of the code), part of the microcontroller 2. How to clear the code: Press and hold the unlock and lock buttons at the same time (some shells have the up and down buttons), the LED indicator flashes three times, release any of the pressed buttons, the other is not loose, click to release Press the button three times, the LED indicator will enter a fast flashing state, and all the data in the memory will be cleared. After the data is cleared, the remote control, no matter which button is pressed, the LED indicator will not light up. 3. Duplicating method: hold the original remote control in one hand, and the duplicating remote control in the other, and place the two remote controls as close as possible. For the keys that need to be copied, the LED indicator flashes quickly three times and then flashes quickly. The copying is successful. The operation methods of other keys are the same. Some remote controls have low transmission power, so the original remote control and the duplicating remote control should be operated back to back for duplicating. If there is interference in some operating environments, the interference operation should be avoided. 4. Frequency: 315MHZ 5. Remote control distance: 50-100 meters 6. Material: PC 7. Dimensions: 60 x 37 x 12mm 8. Weight: 19gSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 4cm * 2cm / 3.15inch * 1.57inch * 0.79inch Qty per Carton 300 Carton Weight 10.50kgs / 23.15lb Carton Size 32cm * 28cm * 24cm / 12.6inch * 11.02inch * 9.45inch Loading Container 20GP: 1240 cartons * 300 pcs = 372000 pcs40HQ: 2878 cartons * 300 pcs = 863400 pcs
£4.99 £1.99
-
Tuya Smart App Wifi Smart Socket Phone Remote Timing Voice Switch Supports Alexa, UK Plug, Style: 16A Power Model, UK Plug, Style: 20A Power Model, US Plug, Style: 16A Power Model, US Plug, Style: 20A Power Model
1. APP: smart life (tuya app)2. Function: APP control, time control, remote control3. Wireless connection: WiFi 2.4Ghz4. Input voltage: AC 100-240V5. Support system: Android, IOS6. Rated power: 2200W7. Working temperature: -10 to 40 degrees Celsius8. Control method: APP control / voice control9. Weight: 68GFeatures:1. Support Tmall Genie, Alexa and Google home voice speaker control2. Schedule your home appliances with timer function3. Realization of intelligence4. Share the device with family members, they can control the device directly on the phoneSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 10cm * 6cm * 10cm / 3.94inch * 2.36inch * 3.94inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs40HQ: 412 cartons * 288 pcs = 118656 pcs
£6.99
-
A8 Charging Base Audio NFC Bluetooth Speaker Alarm Clock, US Plug, UK Plug, EU Plug
Specifications:1. Output power: 5W+5W, peak power 7.5W2. Frequency response: 70-20KHz3. Speaker: 8 ohm, 5Wx2PCS 2.0 stereo speakers4. Signal to noise ratio: FM 40dB iPod/iPhone 70dB AUX input 70dB5. Power input: AC input 100-240V /50-60Hz, DC output 12V/2.5A transformer6. Applicable models: suitable for small interface Apple series7. Clock backup power supply: Built-in a 3V/150mA button battery8. Size: about 21x12.5x9 cm9. Packing list: audio host, power adapter, remote control (containing a 2032 button battery), audio cable, mobile phone pallet, manualFeatures: 1. PLL electronic adjustment FM radio function: receiving frequency 76-108MHz2. Bluetooth function: through the Bluetooth link to play mobile phone music, control up and down music, play and pause, the speaker Bluetooth can answer mobile phone calls and two-way intercom calls3. NFC Bluetooth search-free pairing, touch direct link function4. The sound button adopts a new touch screen with backlight, no buttons, direct touch5. The audio panel and display lens are made of scratch-resistant high-transparent acrylic6. Large-screen LCD clock and status display, highlight backlight, six-level backlight brightness can be adjusted7. Alarm clock function: dual alarm clock settings, alarm clock music can be set to the phone's own ringtones, FM radio, iPod/iPhone music playback8. USB1 supports Apple series playback and charging U disk playback9. USB2 supports charging various Android phones and tablets10. AUX function11. Headphone output function12. With remote control, can remotely control the player13. HIFI-level power amplifier chip, the sound is soft and delicate, rich and fullSpecification: Package Weight One Package Weight 1.50kgs / 3.32lb One Package Size 22cm * 10cm * 15cm / 8.66inch * 3.94inch * 5.91inch Qty per Carton 20 Carton Weight 30.00kgs / 66.14lb Carton Size 59cm * 27cm * 40cm / 23.23inch * 10.63inch * 15.75inch Loading Container 20GP: 418 cartons * 20 pcs = 8360 pcs40HQ: 971 cartons * 20 pcs = 19420 pcs
£40.99
-
For Carrier RG67N BGEF Air Conditioner Remote Control
1. The remote control has buttons, easy to use, and can be easily controlled with one hand.2. Suitable for Carrier RG67N, BGEF air conditioner remote control3. No programming or settings required.4. Note: It is not original, it is a replacement! Most of the functions are the same as the original remote control, but there may be some different buttons!5. Material: ABS plastic6. Power supply: 2 AAA batteries (not included)Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 18cm * 8cm * 3cm / 7.09inch * 3.15inch * 1.18inch Qty per Carton 120 Carton Weight 13.10kgs / 28.88lb Carton Size 38cm * 34cm * 47cm / 14.96inch * 13.39inch * 18.5inch Loading Container 20GP: 439 cartons * 120 pcs = 52680 pcs40HQ: 1019 cartons * 120 pcs = 122280 pcs
£4.99 £1.99
-
D16C Outdoor Remote Control Double Motors Bait Fishing Boat, US Plug, D16C (US Plug)
1. long distance casting and fishing 2. Double-motor & Large-load design, 2 bait containers with about 2kg bearing capacity for more baits 3. 500 meters 2.4GHz remote control without interference,the signal is more stable in a clear environment. Can control the boat forward, backward, left and right, etc 4. Boat Battery: Built-in 7.4V 5200mAh 5. Remote Power: 2 x AAA batteries (not included) 6. Made of quality ABS material, more stable and firm which can against the strong wind and waveSpecification: Package Weight One Package Weight 2.80kgs / 6.17lb One Package Size 56cm * 32cm * 21cm / 22.05inch * 12.6inch * 8.27inch Qty per Carton 2 Carton Weight 6.20kgs / 13.67lb Carton Size 58cm * 34cm * 44cm / 22.83inch * 13.39inch * 17.32inch Loading Container 20GP: 307 cartons * 2 pcs = 614 pcs40HQ: 713 cartons * 2 pcs = 1426 pcs
£55.99