Search results for "electronics components"

About the product1. Replacement LCD display + touch screen digitizer assembly for Asus ZenFone 3 Zoom / ZE553KL Z01HDA. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with Asus: Zenfone 3 Zoom ZE553KL Types LCD Screen + Touch Screen Digitizer Assembly Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Read more less

1. The remote control touch switch buttons are available in a variety of specifications to suit a variety of devices.2. These switches are made of a combination of plastic and metal to ensure durability and reliability, providing a long-lasting solution for controlling electronic devices.3. Compact and light weight, easy to carry and dismantling.4. Versatile and suitable for various devices.Specifications:1. 3x4x2.5mm white, four-pin, bind feet x 252. 3x4x2.5mm white, four-pin x 253. 3x6x4.3mm white, two-pin x 254. 3x6x5mm white, two-pin x 255. 3x4x2mm, two-pin x 256. 3x4x2mm, four-pin x 257. 4x4x1.5mm, four-pin x 258. 4x4x0.8mm, four-pin x 259. 3x6x2.5mm, two-pin x 2510. 6x6x3.1mm, four-pin x 25Specification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 7cm * 1cm / 3.94inch * 2.76inch * 0.39inch Qty per Carton 1000 Carton Weight 11.00kgs / 24.25lb Carton Size 48cm * 46cm * 26cm / 18.9inch * 18.11inch * 10.24inch Loading Container 20GP: 464 cartons * 1000 pcs = 464000 pcs40HQ: 1078 cartons * 1000 pcs = 1078000 pcs

Read more less

LCD Screen FeaturesSpecification: 1. Display Type: INCELL FHD 2. Resolution: 828 x 1972 3. Color Temperature(k): 6700 4. Brightness(cd/m2): 650 5. IC Removable: Yes 6. True Tone: Yes Features: 1. Touch Control 120Hz 2. Original color display 3. High wear resistance 4. Wide color gamut display 5. Low power consumptionAbout the product1. Replacement LCD display + touch screen digitizer assembly (incell Material) for iPhone XR. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Certificate CE, ROHS, GPSR Compatible with Apple: iPhone XR Package Weight One Package Weight 0.16kgs / 0.34lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 60 Carton Weight 9.10kgs / 20.06lb Carton Size 32cm * 29cm * 19cm / 12.6inch * 11.42inch * 7.48inch Loading Container 20GP: 1512 cartons * 60 pcs = 90720 pcs40HQ: 3510 cartons * 60 pcs = 210600 pcs

Read more less

1. The product is an 80 × 40 resolution full-color RGB LED dot matrix module, integrating 3200 LEDs and equipped with dual HUB75 headers, supporting cascade expansion and rapid integration.2. 3200 individual RGB LEDs, full-color display, adjustable brightness3. 80 × 40 pixels, 4mm pitch, allows displaying text, colorful image, or animation4. 320 × 160 (mm) dimensions, moderate size, suitable for DIY desktop display or wall mount display5. Onboard dual HUB75 headers, one for controller data input, one for output, chain support6. Provides open source development resources (examples for ESP32 / Raspberry Pi / Arduino / STM32)Specifications:1. Product dimensions: 320 × 160 mm2. Resolution: 80 × 40 / 3200 dots3. Pixel pitch: 4 mm4. Pixel configuration: 1R1G1B5. Viewing angle: Greater than or equal to 140-degree6. Control method: Synchronous control7. Driving method: 1/20 scan8. Interface type: HUB759. Power supply voltage: 5V / 4A (VH4 connector input)10. Power consumption: Less than or equal to 20WSpecification: Package Weight One Package Weight 0.36kgs / 0.80lb One Package Size 34cm * 18cm * 4cm / 13.39inch * 7.09inch * 1.57inch Qty per Carton 30 Carton Weight 11.90kgs / 26.23lb Carton Size 36cm * 38cm * 47cm / 14.17inch * 14.96inch * 18.5inch Loading Container 20GP: 414 cartons * 30 pcs = 12420 pcs40HQ: 962 cartons * 30 pcs = 28860 pcs

Read more less

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement front LCD display + touch screen digitizer assembly for Vivo NEX Dual Display. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Specification: General Compatible with Vivo: NEX Dual Display Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly for Sony Xperia XZ1 Compact 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with Sony: Xperia XZ1 Compact Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Read more less

1. Stall torque: 30kg.cm @ 12V2. Rotation angle: 360 degrees (0 ~ 4095)3. Position sensor resolution: 360 degrees / 40964. Mechanical limit angle: unlimited5. Operating voltage: 6V ~ 12.6V6. Gear type: high-precision metal gears7. No-load speed: 0.222 sec / 60 degrees (45 RPM) @ 12V 0.192 sec /8. Encoder type: 360-degree magnetic encoder9. ID range: 0 ~ 25310. Baud rate: 38400bps ~ 1Mbps (default 1Mbps)11. Feedback: position, Load, Speed, and12. Input voltage13. No-load current: 180mA14. Stall current: 2.7A15. Kt constant: 11kg.cm/A16. The servo can provide various feedback information: position, speed, torque lock, operating mode (servo mode, servo motor mode, etc.), suitable for advanced projects requiring closed-loop automatic control.17. Can be used to build quadruped, hexapod, robotic arm, and other robot projects requiring multiple servos (this product provides the open-source structural model of the robot dog shown in the figure below).18. Controlled via serial bus, allowing up to 253 servos to be connected in series simultaneously.19. Uses a 12-bit high-precision magnetic encoder angle sensor. Compared to potentiometers, the angle is increased to 360 degrees, and the resolution is increased by 4 times. Due to the gap between the magnetic encoder element and the radial magnet, there is no friction, effectively extending the servo's lifespan.20. Acceleration start/stop function: speed and acceleration values ??can be set for smoother motion.21. The shell uses a higher-strength engineering plastic shell and a dual-axis low-profile shell structure design, optimizing the distance between the planes where the dual-axis servo discs are located, making the overall structure more compact and the product appearance more aesthetically pleasing.22. The servo motor can provide real-time feedback on position, load, speed, and input voltage, allowing for constant monitoring.23. We have open-sourced the web-based control example for the servo motor driver board and provided a secondary development tutorial, which can be directly used for remote setting and control of the servo motor. We also provide 3D models for quick project development.Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 18.40kgs / 40.56lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs40HQ: 1137 cartons * 144 pcs = 163728 pcs

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly with frame for Asus ZenFone 4 Pro ZS551KL. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Specification: General Compatible with Asus: ZenFone 4 Pro ZS551KL Types LCD Screen + Touch Screen Digitizer Assembly Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 66 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch Loading Container 20GP: 514 cartons * 66 pcs = 33924 pcs40HQ: 1194 cartons * 66 pcs = 78804 pcs

Read more less

Product Functions1. A977 passive preamp active speaker volume dual-channel controller is small in size and suitable for active speakers or preamp/post-amp, it supports full-balance or input and output of single-ended signal. The product has functions of independent L/R channel volume adjustment, 2 signals input and 2 signals output. It provides balanced XLR and unbalanced RCA connectors which are automatically converted to each other, with a selector switch facilitates the signal switch of input/output.2. Small size, big intelligence. The product is of small size, but has well-function connecters. It is suitable for decoders and speakers without volume adjustment. the product has the design of balanced input/output and RCA input/output architecture, with switching function. The operation of the product will not cause loss of signal source. Generally, the audio signal released from the decoder is the original sound source signal. Great dynamics will not cause loss of sound quality, retaining the complete original signal source. Specification1. Input/output impedance: 10KΩ - 50KΩ2. 2 in 2 out switchover, unbalanced RCA connector and balanced XRL connector for input/output3. Input: unbalanced RCA connector / balanced XLR connector (convert selection)4. Output: unbalanced RCA connector / balanced XLR connector (convert selection)5. Product net weight: 320g6. Product dimensions: length 145mm x width 65mm x height 43mmSpecification: Package Weight One Package Weight 0.48kgs / 1.05lb One Package Size 22cm * 18cm * 6cm / 8.66inch * 7.09inch * 2.36inch Qty per Carton 24 Carton Weight 10.00kgs / 22.05lb Carton Size 44cm * 36cm * 36cm / 17.32inch * 14.17inch * 14.17inch Loading Container 20GP: 467 cartons * 24 pcs = 11208 pcs40HQ: 1085 cartons * 24 pcs = 26040 pcs

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD Screen + Touch Screen Digitizer Assembly (Hard OLED Material) for iPhone XS 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed Specification: General Compatible with Apple: iPhone XS Types LCD Screen + Touch Screen Digitizer Assembly Package Weight One Package Weight 0.13kgs / 0.29lb One Package Size 25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch Qty per Carton 60 Carton Weight 7.00kgs / 15.43lb Carton Size 32cm * 37cm * 22cm / 12.6inch * 14.57inch * 8.66inch Loading Container 20GP: 1023 cartons * 60 pcs = 61380 pcs40HQ: 2376 cartons * 60 pcs = 142560 pcs

Read more less

1. Pixel: 64 x 32=2048 dots2. Pitch: 2.5mm3. Pixel format: 1R1G1B4. Viewing angle: greater than 140 degrees5. Control mode: synchronous6. Drive: 1/16 scan7. Connector: HUB758. Power supply: V / 2.5A (VH4 connector input)9. Power: within 12W10. Size: 16 x 8cmFeatures:1. 2048 independent RGB led, full color display, adjustable brightness2. 64x32 pixels, 2.5mm pitch, allows displaying text, color images or animations 3. 160x80mm size, moderate size, suitable for DIY desktop display or wall mount display4. Two HUB75 headers on board, 1 for controller data input, 1 output, chain support5. Provide open source development resources (for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino, etc.)Specification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 20cm * 10cm * 2cm / 7.87inch * 3.94inch * 0.79inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs40HQ: 412 cartons * 74 pcs = 30488 pcs

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the watch. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means watch apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in watch. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Fitbit Ionic 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedSpecification: General Compatible with Fitbit: Ionic Package Weight One Package Weight 0.08kgs / 0.18lb One Package Size 20cm * 10cm * 3cm / 7.87inch * 3.94inch * 1.18inch Qty per Carton 40 Carton Weight 3.40kgs / 7.50lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 40 pcs = 24800 pcs40HQ: 1439 cartons * 40 pcs = 57560 pcs

Read more less