Search results for "continuity tester"

1. Operation mode: TA803A: manual range; TA803B/TA803C: manual/automatic range2. DC voltage: TA803A/TA803B: 0.1mV-1000V; TA803C: 0.01mV-1000V3. AC voltage: 0.01mV-750V4. Current: 0.01uA-10A5. Capacitance: TA803A: 1nF-20000uF; TA803B: 1nF-6000uF; TA803C: 1nF-2000uF6. Resistance: TA803A: 0.1 ohm-20 megohm; TA803B: 0.1 ohm-60 megohm; TA803C: 0.01 ohm-20 megohm7. Frequency: TA803A: 40Hz-1000Hz; TA803B: 10Hz-100kHz; TA803C: 10Hz-20MHz8. Display: TA803A: 1999 (31/2) bits; TA803B: 5999 (3 5/6) bits; TA803C: 19999 (4 1/2) bits9. Sampling frequency: about 3 times / second10. Power supply: 9V battery (not included)11. Automatic shutdown: about 15min12. General features: intelligent anti-burn-in, low voltage display, rms value, backlight display, on/off alarm, value lock13. Functions:- TA803A: analog bar display, average value measurement, diode measurement, triode measurement, NCV function- TA803B: diode measurement, maximum / small value measurement, temperature measurement, duty cycle / relative value- TA803C: analog bar display, diode measurement, temperature measurement, duty cycle/relative value14. Size: about 18.4 x 8.8 x 4.6cm15. Weight: about 320gFeatures:1. Soft rubber protective case + meter pen clip design, leather case can be drop-proof, dustproof, shockproof, meter pen can be stored for protection, to avoid accidental injury2. Back thickened bracket design, more convenient placement3. Flashlight lighting function, in the dark environment can also be easily measured4. Large screen backlight display, easy to read in the dark environment5. NCV voltage sensing function, according to the detected voltage strength, display and different frequency of the beeping alarm sound (only TA803A has)Packing list:- Host x 1- Meter pen x 2- Thermocouple x 2- Fuse x 2- Instruction manual x 1Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 21cm * 14cm * 7cm / 8.27inch * 5.51inch * 2.76inch Qty per Carton 30 Carton Weight 16.50kgs / 36.38lb Carton Size 44cm * 34cm * 43cm / 17.32inch * 13.39inch * 16.93inch Loading Container 20GP: 414 cartons * 30 pcs = 12420 pcs40HQ: 962 cartons * 30 pcs = 28860 pcs

Read more less

1. Interface Type:USB / Type-C 1 / Type-C 2 / USB-Micro / Lighting 2. Power Supply Port Type:Type-C 3. Output Current:1A 4. Output Voltage:5V 5. Product Size:About 48.5x45mm 6. Net Weight:About 12g 7. The measurement allowed error is +/- 1.0-2.0cm 8. All 4 indicator lights are on, then the data line is normal (double-head type-C data line requires all 5 indicator lights to be on). 9. If VCC or GND is not lit, it indicates that the charging function of the data line is abnormal. 10. D+ or D- is off, indicating that the data transmission function is abnormal. 11. CC is dedicated to double-head type-C data line detection. When testing other data lines, the light will not turn on. 12. The operation is simple, the detection is convenient, and the detection efficiency of the data line is improved. 13. Uncompromising performance in an ultra-light body,heavyweight performance without the weight.Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 9.5cm * 6.2cm * 1.5cm / 3.74inch * 2.44inch * 0.59inch Qty per Carton 200 Carton Weight 8.60kgs / 18.96lb Carton Size 32cm * 30cm * 22cm / 12.6inch * 11.81inch * 8.66inch Loading Container 20GP: 1262 cartons * 200 pcs = 252400 pcs40HQ: 2931 cartons * 200 pcs = 586200 pcs

Read more less

After you repair the Wheel Steering Motor, our product can be directly tested on the workbench to see if it works properly without the need to reinstall it in the car for repeated testing. Function: 1. Simulate Torque Sensor to Activate CAN; 2. Can Flash Firmware, Update Software; 3. Also can test the Torque Sensor; 4. When you connect to the diagnostic scanner, you can read the data about Torque Sensor. Operation: Switch: Select the model you want to test. ("FOCUS" "Linc""V40") "<" ">": Drive or Rotate the Wheel Steering Motor. Power supply:12V 10A, we do not send with this cable. Screen:Show work voltage or current of the tester. Support to connect to other diagnostic scanner to check the real-time data for Wheel Steering Motor. Support model: For FORD C-MAX II 2010 - For FORD FOCUS III 2011 - 2017 For FORD TRANSIT CONNECT Wagon/Man 2013 - For FORD USA EXPLORER 2011 - For FORD USA FLEXoff-road closed 2012- For FORD USA TAURUS 2012 - For LINCOLN MKC 2014 - For LINCOLN MKS 2012 - For VOLVO V40 2011 - 2018 Note: Only suit for Iron Shell Steering Wheel Motor. Note: 1. The flashing firmware must be done using original manufacturer software. 2. Online flashing firmware using decoders is not supported. 3. Additionally, during the steering testing process, it is advisable to avoid extending to the maximum limit to reduce the risk of losing EPS computer board data. Package List: 1. Tester x 1 2. Adapter Cable x 1 3. 12V Power Adapter x 1Specification: Package Weight One Package Weight 3.11kgs / 6.85lb One Package Size 46cm * 25cm * 35cm / 18.11inch * 9.84inch * 13.78inch Qty per Carton 2 Carton Weight 7.20kgs / 15.87lb Carton Size 52cm * 47cm * 35cm / 20.47inch * 18.5inch * 13.78inch Loading Container 20GP: 311 cartons * 2 pcs = 622 pcs40HQ: 723 cartons * 2 pcs = 1446 pcs

Read more less

FeaturesThe automotive electrical system activator is suitable for 6-40V power circuit diagnosis. It has a compact design and powerful functions. It has reverse connection and overload protection functions. The tool probe can be used to test the conductivity of the circuit and detect voltage, positive and negative pole detection, activation components and other functions. It can quickly detect short circuits, broken wires or poor contact of vehicle electrical system components, helping users to understand the vehicle faster and more accurately. It is an efficient and advanced testing tool that can greatly improve the users work efficiency. Main functions: Voltage detection, resistance detection, diode detection, positive and negative pole detection, component activation, continuity test, grounding test, tracking and locating short circuits Product selling points: 1. The product can choose 2 No. 7 batteries, without double-headed clips for power supply (batteries are not included). 2. Silicone button pot pieces (make the product operation more handy). 3. 4 meters of detection line. 4. The probe input voltage is up to 107V. (Customizable up to 150V) 5. Intelligent recognition of voltage/resistance (1 ohm-100K ohm data).Specifications1. Diagnostic Method: Wired 2. Screen type: LCD 3. Wire length: 4 meters 4. Working voltage: 5V-40V 5. Power Supply Mode: Mode 1: 2pcs AAA Batteries(goods shipped without batteries,so you should buy the batteries by yourself) Mode 2: 12V or 24V power supply 6. Working currency: 40mA 7. Activation current: 0-8ASpecification: Package Weight One Package Weight 0.34kgs / 0.75lb One Package Size 26cm * 10cm * 6cm / 10.24inch * 3.94inch * 2.36inch Qty per Carton 20 Carton Weight 7.50kgs / 16.53lb Carton Size 42cm * 32cm * 28cm / 16.54inch * 12.6inch * 11.02inch Loading Container 20GP: 708 cartons * 20 pcs = 14160 pcs40HQ: 1645 cartons * 20 pcs = 32900 pcs

Read more less

1. Display: 1.77-inch TFT (160x128 DPI)2. External power supply: 12 or 24V power supply is provided through the vehicle battery3. It has short circuit protection function. If the load is too large, its internal circuit breaker will tripThis circuit breaker is not only a useful test tool, but also a safety measure to protect the tool from overload damage.4. When the circuit breaker trips, all other functions of the tool are still in normal working state, which means you can still detect the circuit and observe the voltage readings. When the circuit breaker trips, the tool cannot conduct battery current to the probe even if the power switch is pressed. Intentionally tripping the circuit breaker and using the tool for detection can be considered an additional precaution to prevent accidental pressing of the power switch.5. There are four modes for diagnosing electrical systems, which can be entered by pressing the "Mode Button" and switching in turn.6. DC voltage: When using this tool in this mode, the probe tip is contacted with the circuit, and the LCD display will then display the DC voltage value with an accuracy of 0.1V7. AC voltage: When using the tool in this mode, the probe tip is contacted with the circuit, and the LCD display will then display the voltage and frequency.8. Resistance Test: When using this tool in this mode, the probe tip is contacted with the circuit, and the LCD display will then display the resistance value between the tip and the auxiliary ground wire.9. Diode: In this mode, the probe tip contacts the positive electrode of the diode, connects the auxiliary ground wire to the negative electrode of the diode, the screen will display a forward voltage drop, indicating a forward bias. If the position of the probe tip and auxiliary ground wire are exchanged, the screen will not display a voltage, indicating a reverse bias.Voltage and Polarity Test: When the tool is in DC voltage mode, contact the probe tip with the forward circuit, the red LED will light up, the LCD display will display the voltage, the resolution is 0.1V, and a beep will sound10. If the probe tip is contacted with the negative circuit, the green LED will light up, the LCD display will display the voltage, the resolution is also 0.1V, and a beep will sound. If the probe tip is contacted with the open circuit circuit, neither LED will light up.11. Continuity Test: When the tool is in resistive mode, the probe tip is used to connect to the body ground wire or auxiliary ground wire, and conductivity tests can be performed on the wires and components that connect or disconnect the vehicles electrical system.12. When the probe tip is in contact with good grounding, the LCD display will display "0.0Ω" and the green LED will light up, making a beep sound. In other cases, the LCD display will only display the resistance value.13. If the resistance value is greater than 100 kiloohms, the LCD display will display "0L"14. Size: 225x45x35 mmSpecification: Package Weight One Package Weight 0.45kgs / 1.00lb One Package Size 28cm * 13cm * 6cm / 11.02inch * 5.12inch * 2.36inch Qty per Carton 10 Carton Weight 5.60kgs / 12.35lb Carton Size 30cm * 28cm * 32cm / 11.81inch * 11.02inch * 12.6inch Loading Container 20GP: 992 cartons * 10 pcs = 9920 pcs40HQ: 2303 cartons * 10 pcs = 23030 pcs

Read more less

1. Built-in power display light clearly shows the operating status for improved convenience and usability. 2. Easy Operation/Strong Stability/High-Precision Detection/Rapid Fault Point Locking/Plug-in Operation 3. Quick Troubleshooting, Worry-free Inductance 4. Rapid Locking of Fault Points, Strong Stability, Easy Operation 5. Suitable for testing the quality of inductors on electronic motherboards 6. Package includes: 1 x Induction TesterSpecification: Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 10cm * 1cm * 4cm / 3.94inch * 0.39inch * 1.57inch Qty per Carton 1500 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 32cm * 42cm / 20.47inch * 12.6inch * 16.54inch Loading Container 20GP: 381 cartons * 1500 pcs = 571500 pcs40HQ: 885 cartons * 1500 pcs = 1327500 pcs

Read more less

1. Regardless of agreement, as long as 6V-12V-24V lead-acid batteries are available.2. Support languages: Chinese, English, German, French, Japanese, Dutch, Russian, Spanish, Italian, Persian, Portuguese, Polish3. Screen size: 3.2 inch color screen4. Simple operation and easy to carry.5. Lets you know the output voltage of the generator, the rectifier dipde and charging current.Specification: Package Weight One Package Weight 1.08kgs / 2.39lb One Package Size 26cm * 20cm * 10cm / 10.24inch * 7.87inch * 3.94inch Qty per Carton 20 Carton Weight 21.60kgs / 47.62lb Carton Size 52cm * 48cm * 42cm / 20.47inch * 18.9inch * 16.54inch Loading Container 20GP: 254 cartons * 20 pcs = 5080 pcs40HQ: 590 cartons * 20 pcs = 11800 pcs

Read more less

1. This frequency meter can measure the frequency parameters of continuous carrier signal (intercom, cordless phone) and digital signal (GSM, CDMA, PHS, wireless remote control, etc.), with signal strength indication. It is a maintenance staff, wireless enthusiasts to test the frequency And the preferred tool for signal strength.2. Frequency counting resolution: 200K (dedicated for digital signal), 1K, 100HZ, optional3. Test distance: 450M is about 8 meters. 150M is about 5 meters (please test with actual distance, different instruments have different distances)4. Test range: 50MHZ --- 2400MHZ5. Battery: 9V laminated battery 6F226. Automatic shutdown: 2 minutes (200K file without automatic shutdown)Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 13cm * 11cm * 6cm / 5.12inch * 4.33inch * 2.36inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

1. Built-in various safety protections, reverse polarity protection, temperature protection, leakage protection, etc., safe to use2. Using ABS flame retardant material, not waterproof3. With multiple functions, easy to use and easy to carry4. Features: 2 in 1 battery tester and battery charger5. Main functions: battery charging, battery test, start system test, charging system test, view data, set language6. Suitable for 12V SLI / AGM / EFB / GEL / LiFeP04 battery7. Current (Max): 8A8. Charging voltage: 2-200Ah9. Input voltage: 100VAC-240VAC 15.00V (Max)10. Working temperature: -20 - 50 degrees Celsius11. Electric energy conversion rate: 90%12. Product weight: 0.8KGSpecification: Package Weight One Package Weight 1.00kgs / 2.21lb One Package Size 28cm * 18cm * 7cm / 11.02inch * 7.09inch * 2.76inch Qty per Carton 20 Carton Weight 21.00kgs / 46.30lb Carton Size 58cm * 38cm * 30cm / 22.83inch * 14.96inch * 11.81inch Loading Container 20GP: 403 cartons * 20 pcs = 8060 pcs40HQ: 936 cartons * 20 pcs = 18720 pcs

Read more less

1. Material: ABS/stainless steel2. Count: 40003. NCV sensitivity: when the probe tip is close to the object being tested, a green backlight flashes when the induced electric field is weak, and a red backlight flashes when the induced electric field is strong.4. Circuit break location: select NCV mode and follow the circuit. A strong alarm signal indicates a good circuit, while a weak signal indicates a break.5. Suitable for various automotive circuit tests; AUTO automatically identifies AC voltage, resistance, and continuity tests.6. P-Phase sequence detection: switch to Phase mode and follow the steps below to touch the A, B, and C points of the three-phase power supply to detect the phase sequence.7. LCD backlit display: the screen values ??are clearly visible in dark environments.8. Live mode: when the probe tip touches the circuit, the live wire displays "H" with a beep, and the neutral wire displays "Live" with no beep.9. High-resilience spring cord, made of stretchable and tensile-resistant material, will not deform even after repeated stretching, fully elastic and shrinks back to its original shape without becoming tangled, featuring tensile strength, durability, and cold resistance.10. A3016: equipped with a Type-C charging cable, red light during charging, green light when fully charged, built-in 500mA high-capacity rechargeable lithium battery.11. A3015: uses two AAA batteries (not included).12. After 15 minutes of inactivity after powering on, the product will automatically enter sleep mode and shut down, extending battery life and saving energy.13. Dimensions: 17.7x2.8x2.6cmSpecification: Package Weight One Package Weight 0.19kgs / 0.42lb One Package Size 20cm * 9cm * 5cm / 7.87inch * 3.54inch * 1.97inch Qty per Carton 48 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 48 pcs = 25056 pcs40HQ: 1212 cartons * 48 pcs = 58176 pcs

Read more less

1. Operating voltage: 9-16V2. Operating environment: -20-60°C3. Storage temperature: -20-60°C4. Supported languages: English, German, French, Spanish, Italian, Russian, Korean, Polish, Chinese, Japanese, Portuguese5. Quickly resets fault lights on all modules and accurately diagnoses tens of thousands of vehicle parameters6. Reads/clears fault codes for all vehicle systems and explains their meanings7. Reads engine fault codes and clears the engine check light on the instrument panel8. Performs I/M readiness test, oxygen sensor test, fuel evaporation system leak test, and exhaust emission sensor test9. Transfers test data to a mobile phone for printing or sharing10. Supports vendor-specific code lookup and over 40,000 fault codes, with explanations for each code11. Dimensions: 195 x 106 x 35 mm12. Weight: 375.8 gSpecification: Package Weight One Package Weight 0.58kgs / 1.29lb One Package Size 25cm * 13cm * 8cm / 9.84inch * 5.12inch * 3.15inch Qty per Carton 24 Carton Weight 15.10kgs / 33.29lb Carton Size 57cm * 30cm * 43cm / 22.44inch * 11.81inch * 16.93inch Loading Container 20GP: 362 cartons * 24 pcs = 8688 pcs40HQ: 841 cartons * 24 pcs = 20184 pcs

Read more less

1. Power off save, low voltage alarm, timing display, reverse connection protection2. Real-time monitoring, smart chip, precision fine-tuning3. Applicable to various instruments, mobile convenient equipment, medical equipment, electric vehicles, balance vehicles, unicycles, ternary lithium batteries, lead-acid batteries, iron-lithium battery packs, etc.4. Stable and reliable, fast recognition, sensitive response5. Reverse connection does not burn, safe and reliable6. The LCD display works, you can set the type of battery you need to measure7. Waterproof grade: IPX78. Working current: less than or equal to 15mA9. Working air pressure: 80-106 kPa10. Ambient temperature: -10 to 70 degrees Celsius11. Measuring range: 8-72v / 8-100v12. Measurement speed: about 2 seconds/time13. Display mode: LCD screen14. Installation size: 58 x 28mm15. Dimensions: 61.3x33.3x16.2mm16. Weight: about 27gSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 5cm * 3cm / 3.94inch * 1.97inch * 1.18inch Qty per Carton 500 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs40HQ: 562 cartons * 500 pcs = 281000 pcs

Read more less