Search results for "e-bike charger"

1. Four independent charging channels: With independent charging control chip, precise control of the charging situation of each charging slot, the working power of the charger is 12V-3A, and a dedicated DC switching power supply is used2. There are four levels of charging current available for selection, 200/300/500/700/1000mA, among which, if there is only 1, 4 channels with batteries, the current levels are: 200/300/500/700/1000 / 1500/2000mA, the discharge battery can be set to 200/300/500/700/1000mA3. The discharging mode does not switch to charging, and the battery discharge capacity is displayed. In charging mode, the 4.21V charger is judged to be fully charged4. LCD screen: Can display the real-time charge/discharge capacity, voltage, current, and time of the 4 channels of batteries5. Four working modes: Charge, discharge, repair and capacity test and battery internal resistance test6. Applicable battery type: Lithium battery, model: 10440, 14500, 16340, 18500, 18650, 26650, 26500; Ni-MH battery, model: AA, AAA, C, D7. Working temperature: 0 to 40 degrees celsius8. Note: The product does not contain batteriesFunction button:1. MODE operating mode selection button2. DISPLAY display mode button3. CURRENT current adjustment button4. SLOT, can individually adjust the working mode of each channelThe specific operation method of the charger:1. Long press MODE for 2 seconds to enter the working mode to select, and then press this key to have four working modes to choose from, namely charge, discharge, repair capacity test and battery internal resistance test2. Press DISPLAY to display the charge current, battery voltage, battery power, and battery charge and discharge time respectively.3. When power on, the charger defaults to the charging mode and the charging current is 500mA4. When powering on, press CURRENT to adjust the current. When entering work, if you want to adjust the current again, you need to switch the working mode to press this key to be effective. The charge and discharge current can be adjusted.5. Press SLOT to adjust the working mode of each channel individually6. When the temperature of the battery exceeds 40 degrees when the battery is charged or the temperature of the PCB board exceeds 40 degrees, the fan will start to rotate.7. Select the capacity test working mode, the current can be the same as chargingSpecification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 22cm * 16cm * 8cm / 8.66inch * 6.3inch * 3.15inch Qty per Carton 20 Carton Weight 15.00kgs / 33.07lb Carton Size 45cm * 33cm * 42cm / 17.72inch * 12.99inch * 16.54inch Loading Container 20GP: 427 cartons * 20 pcs = 8540 pcs40HQ: 992 cartons * 20 pcs = 19840 pcs

Read more less

Product features: 1. High conversion efficiency, energy saving, low operating temperature, and components with a temperature resistance above 105 degree Celsius. 2. When the battery is fully charged, it will automatically stop and transfer to the floating state. At this time, the charging has a repairing effect on the battery. Therefore, the battery will not be vulcanized due to overcharging or insufficient charging, resulting in a smaller capacity and a shorter service life. Overcoming the shortcomings of the old low frequency charger increases the discharge capacity and service life of the battery. 3. With soft start function, the starting current is small, and the AC input shock is effectively reduced. Can withstand frequent switch activation without damage to the power supply. 4. With short circuit protection and overload protection, it adopts constant current, constant voltage and turbulent three-stage charging to protect the charger and battery. 5. Turning light indication function, red light standby (no load) / full, blue light / yellow light charging, the status is clear at a glance. 6. Low temperature and long service life at full load. Parameter: 1. input: AC 100-240V~ 50/60Hz 2. Output: 13.8V 1300mA 3. Battery capacity Charging time (reference value, depending on battery) 12V 5-7Ah more than 6 hours 12V 9Ah more than 10 hours 12V 15-25Ah more than 13-25 hours Specifications and performance: 13.8V1A (12V1300mA) Floating charge voltage: 14.2V+/-0.5V Constant voltage output voltage: 13.8V+/-0.5V Constant current charging current: 0.85-1.25A Conversion current: 450-550mA DC maximum output power: 13W Efficiency: more than 84% (maximum output voltage, full load) Input voltage range: 100 ~ 240V AC; 50 ~ 60Hz Input current: 0.05A/MAX Overload protection: 105% to 150% type: Reset: automatic recovery Temperature coefficient: +/-0.03% degree Celsius(0 ~ 50 degree Celsius) OUTPUT Working temperature, humidity: -10 degree Celsius~ +40 degree Celsius, 20% ~ 90% RH Storage temperature, humidity: -10 degree Celsius ~ +60 degree Celsius, 20% ~ 90% RH Wiring length: input: 65CM, output, output 85CM Note: The above parameters test conditions are: 220V AC input, rated load, 25 degree Celsius 70% RH humidity. Connection method: 1. The red pin is connected to the positive pole and the black is connected to the negative pole. 2. With the repair function, when the indicator light is empty, it can be recharged for 1 to 10 hours. 3. Two-color light indication, over-charge protection, full automatic stop. 4. With reverse connection protection, not afraid of short circuit. 5. Suitable for batteries below 25Ah. Scope of application: All 12V valve-controlled maintenance-free lead-acid batteries / water batteries (motorcycle batteries, battery car single battery, car battery, backup power, ups, emergency power, solar, audio, fire power, security power supply are mostly 12V) .Specification: Package Weight One Package Weight 0.13kgs / 0.28lb One Package Size 12cm * 5.5cm * 5.5cm / 4.72inch * 2.17inch * 2.17inch Qty per Carton 100 Carton Weight 14.00kgs / 30.86lb Carton Size 36cm * 32cm * 32cm / 14.17inch * 12.6inch * 12.6inch Loading Container 20GP: 723 cartons * 100 pcs = 72300 pcs40HQ: 1679 cartons * 100 pcs = 167900 pcs

Read more less

⚡ One Charger. Four Batteries. Less Waiting.Power up your rechargeable batteries with the NITECORE NEW i4 intelligent 4-slot charger. Its independent charging design helps you charge compatible batteries efficiently while the LED indicators keep you informed.Why You’ll Love It Charge up to 4 batteries simultaneously Independent slot monitoring for flexible charging Supports a wide range of compatible Li-ion, Ni-MH and Ni-Cd batteries Active Current Distribution technology helps manage charging intelligently Compact design for home, travel and everyday battery care CompatibilityDesigned for compatible 1.2V, 3.7V, 4.2V and 4.35V rechargeable batteries, including popular 14500, 16340, 18650, 22650 and 26650 formats. Always check your battery specifications before charging.Make your battery setup simpler with one intelligent multi-slot charger.

Read more less

1. Protection function: overcharge protection, reverse connection protection, short circuit protection, overcurrent protection2. Application range: lead-acid lithium battery3. Output parameter: 12V/6A4. Rated power: 90W5. Input voltage: 100-240V AC, 50-60Hz6. Starting voltage: 5.0V7. Supports car battery health status check, charging, and maintenance8. High-precision battery tester, test range from 4AH-200AH9. Pulse repair function helps you repair and increase battery life and performance, and can be tested by FTC-1206 battery SOH10. 1.9-inch large LCD display, the display results are clear and easy to read when in use11. Easy-to-use interface, multi-language user guide, including RU, FR, ES, DE, EN, IT12. Intelligent chip control, fast detection speed, accurate detection, easy to use13. Automatic charging when connected to the battery, precise CPU control, intelligent charging, no adjustment required14. Automatic temperature detection, the charger automatically adjusts the charging voltage according to the ambient temperature15. The AC power cord is detachable, which is convenient for customers to replace longer or other required power cords16. Dimensions: 177x86x57mm17. Weight: 465gSpecification: Package Weight One Package Weight 0.57kgs / 1.27lb One Package Size 23cm * 13cm * 7cm / 9.06inch * 5.12inch * 2.76inch Qty per Carton 30 Carton Weight 18.50kgs / 40.79lb Carton Size 49cm * 43cm * 36cm / 19.29inch * 16.93inch * 14.17inch Loading Container 20GP: 351 cartons * 30 pcs = 10530 pcs40HQ: 816 cartons * 30 pcs = 24480 pcs

Read more less

1. Easy to install and operate. 2. High quality material,more durable and reliable. 3. Suitable for 12V motorcycle. 4. Note: Red line connects positive pole, black connects negative pole.Specification: General Model X-1 Material Plastic, Aluminum alloy Input Voltage 12V-30V Output 5V 2A Weight 258g Product Parameter Colors Available Black Fits for Gender Unisex Package Weight One Package Weight 0.34kgs / 0.75lb One Package Size 15cm * 10cm * 8cm / 5.91inch * 3.94inch * 3.15inch Qty per Carton 40 Carton Weight 16.00kgs / 35.27lb Carton Size 40cm * 40cm * 35cm / 15.75inch * 15.75inch * 13.78inch Loading Container 20GP: 476 cartons * 40 pcs = 19040 pcs40HQ: 1105 cartons * 40 pcs = 44200 pcs

Read more less

Product features: 1. High conversion efficiency, energy saving, low operating temperature, and components with a temperature resistance above 105 degree Celsius. 2. When the battery is fully charged, it will automatically stop and transfer to the floating state. At this time, the charging has a repairing effect on the battery. Therefore, the battery will not be vulcanized due to overcharging or insufficient charging, resulting in a smaller capacity and a shorter service life. Overcoming the shortcomings of the old low frequency charger increases the discharge capacity and service life of the battery. 3. With soft start function, the starting current is small, and the AC input shock is effectively reduced. Can withstand frequent switch activation without damage to the power supply. 4. With short circuit protection and overload protection, it adopts constant current, constant voltage and turbulent three-stage charging to protect the charger and battery. 5. Turning light indication function, red light standby (no load) / full, blue light / yellow light charging, the status is clear at a glance. 6. Low temperature and long service life at full load. Parameter: 1. input: AC 100-240V~ 50/60Hz 2. Output: 13.8V 1300mA 3. Battery capacity Charging time (reference value, depending on battery) 12V 5-7Ah more than 6 hours 12V 9Ah more than 10 hours 12V 15-25Ah more than 13-25 hours Specifications and performance: 13.8V1A (12V1300mA) Floating charge voltage: 14.2V+/-0.5V Constant voltage output voltage: 13.8V+/-0.5V Constant current charging current: 0.85-1.25A Conversion current: 450-550mA DC maximum output power: 13W Efficiency: more than 84% (maximum output voltage, full load) Input voltage range: 100 ~ 240V AC; 50 ~ 60Hz Input current: 0.05A/MAX Overload protection: 105% to 150% type: Reset: automatic recovery Temperature coefficient: +/-0.03% degree Celsius(0 ~ 50 degree Celsius) OUTPUT Working temperature, humidity: -10 degree Celsius~ +40 degree Celsius, 20% ~ 90% RH Storage temperature, humidity: -10 degree Celsius ~ +60 degree Celsius, 20% ~ 90% RH Wiring length: input: 65CM, output, output 85CM Note: The above parameters test conditions are: 220V AC input, rated load, 25 degree Celsius 70% RH humidity. Connection method: 1. The red pin is connected to the positive pole and the black is connected to the negative pole. 2. With the repair function, when the indicator light is empty, it can be recharged for 1 to 10 hours. 3. Two-color light indication, over-charge protection, full automatic stop. 4. With reverse connection protection, not afraid of short circuit. 5. Suitable for batteries below 25Ah. Scope of application: All 12V valve-controlled maintenance-free lead-acid batteries / water batteries (motorcycle batteries, battery car single battery, car battery, backup power, ups, emergency power, solar, audio, fire power, security power supply are mostly 12V) .Specification: Package Weight One Package Weight 0.13kgs / 0.28lb One Package Size 12cm * 5.5cm * 5.5cm / 4.72inch * 2.17inch * 2.17inch Qty per Carton 100 Carton Weight 14.00kgs / 30.86lb Carton Size 36cm * 32cm * 32cm / 14.17inch * 12.6inch * 12.6inch Loading Container 20GP: 723 cartons * 100 pcs = 72300 pcs40HQ: 1679 cartons * 100 pcs = 167900 pcs

Read more less

Type:USB Charging Equipment Brand Name:EAFC Dual USB interface, smart chargingSpecification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 10cm * 5cm * 5cm / 3.94inch * 1.97inch * 1.97inch Qty per Carton 144 Carton Weight 15.00kgs / 33.07lb Carton Size 52cm * 26cm * 26cm / 20.47inch * 10.24inch * 10.24inch Loading Container 20GP: 758 cartons * 144 pcs = 109152 pcs40HQ: 1761 cartons * 144 pcs = 253584 pcs

Read more less

1. Microprocessor Control (CPU). 2. This is a fully automatic battery charger with 7 charge stages.3. Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.4. 7-stage chargers are suitable for most battery types including Calcium, Gel AGM, LiFePo4, Wet, lead Acid batteries. They may also help restore drained and sulphated batteries.5. Types of batteries: Most types of lead acid batteries including Calcium, Gel AGM, LiFePo4, Wet, lead Acid, etc..6. Switchmode technology: Yes7. Polarity protection: Yes8. Output short protection: Yes9. Non battery link protection: Yes10. Over voltage protection: Yes11. Over temperature protection: Yes12. Cooling: Fan13. Input voltage: 100-240V AC, 50-60Hz14. Rated output: 12V 12A , 24V 6A15. Minimum start voltage: 8.0V16. Thermal protect: 65+/-5 degree Celsius17. Efficiency: App. 85%.18. Dimension (L×W×H): 170×100×65mm 19. Weight: 720gSpecification: General Certificate ROHS, FCC, UL, EMC, LVD Package Weight One Package Weight 0.86kgs / 1.88lb One Package Size 14cm * 7.5cm * 24.5cm / 5.51inch * 2.95inch * 9.65inch Qty per Carton 28 Carton Weight 25.33kgs / 55.84lb Carton Size 52cm * 44cm * 32cm / 20.47inch * 17.32inch * 12.6inch Loading Container 20GP: 364 cartons * 28 pcs = 10192 pcs40HQ: 845 cartons * 28 pcs = 23660 pcs

Read more less

1. Microprocessor Control (CPU). 2. Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.3. 7-stage chargers are suitable for most battery types including Calcium, Gel , AGM, Wet , Lithium, Lead Acid, LiFePo4 batteries. They may also help restore drained and sulphated batteries.4. Switchmode technology: Yes5. Polarity protection: Yes6. Output short protection: Yes7. Non battery link protection: Yes8. Over voltage protection: Yes9. Over temperature protection: Yes10. Cooling: Fan11. Input voltage: 100-240V AC, 50-60Hz12. Rated output: 12V 6A 24V 3A13. Minimum start voltage: 8.0V14. Battery range: 6-120Ah15. Thermal protect: 65+/-5 degree Celsius16. Efficiency: App. 85%.Specification: General Certificate ROHS, FCC, UL, EMC, LVD Package Weight One Package Weight 0.59kgs / 1.30lb One Package Size 24cm * 14cm * 7cm / 9.45inch * 5.51inch * 2.76inch Qty per Carton 40 Carton Weight 24.90kgs / 54.89lb Carton Size 52cm * 48cm * 42cm / 20.47inch * 18.9inch * 16.54inch Loading Container 20GP: 254 cartons * 40 pcs = 10160 pcs40HQ: 590 cartons * 40 pcs = 23600 pcs

Read more less

1. Input: 100-220V2. Output: 42V / 2A3. Scope of application: suitable for Xiaomi Mijia M365 & Ninebot ES2 / ES44. A lithium battery pack with a battery voltage of 36V, and a charging port with a diameter of 5.5mm and a DC head that can be used universally.5. Weight: about 250g6. Size: about 17x6x3.2cmSpecification: General Certificate CE Package Weight One Package Weight 0.29kgs / 0.64lb One Package Size 18cm * 10cm * 6cm / 7.09inch * 3.94inch * 2.36inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 98 pcs = 17346 pcs40HQ: 412 cartons * 98 pcs = 40376 pcs

Read more less

1. 12V power supply mode: used to charge batteries with voltage below 5V, or convert to DC power to power DC 12V devices, such as DC fans, oil changers, or as a memory holder when replacing batteries.2. Fast battery charger: can charge or repair all 12V lead-acid automotive, marine and deep cycle batteries, including AGM, GEL, SLA, lithium iron phosphate and flooded batteries for cars, trucks, SUVs, motorcycles, lawn mowers, ships, etc.3. Battery trickle charging: built-in multiple battery charging protection functions to ensure safe charging at all times during battery maintenance for months during winter or holidays, and prevent battery failure in advance.4. Efficient pulse repair: the car battery charger can detect battery sulfation and acid stratification, and adopts the latest pulse repair function to restore the performance of damaged batteries, thereby enhancing engine starting performance and extending battery life.5. Visual charging: the large LCD screen displays charging and battery status; charging voltage, charging current, in-vehicle temperature, charging percentage, summer mode, winter mode, etc., which is more convenient to use.6. Plug and Play: No complicated steps required, just plug and charge, you can charge at home. A battery solution that integrates car battery charger, battery maintainer, trickle charger and battery desulfurizer.Product Parameters:1. Model: FBC1206F2. Input cable length: about 70cm3. Output cable length: about 60cm4. Input voltage: 100-240V AC, 50-60Hz5. Rated output: 12V 6A6. Battery capacity: 4-120Ah7. Dimensions: 152x81x57mm8. Weight: 413gSpecification: Package Weight One Package Weight 0.48kgs / 1.07lb One Package Size 24cm * 12cm * 7cm / 9.45inch * 4.72inch * 2.76inch Qty per Carton 30 Carton Weight 15.50kgs / 34.17lb Carton Size 50cm * 38cm * 38cm / 19.69inch * 14.96inch * 14.96inch Loading Container 20GP: 369 cartons * 30 pcs = 11070 pcs40HQ: 857 cartons * 30 pcs = 25710 pcs

Read more less

1. This is a fully automatic battery charger with 7 charge stages.2. Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.3. 7-stage chargers are suitable for most battery types including Calcium, Gel , AGM, Wet , Lead Acid batteries. They may also help restore drained and sulphated batteries.4. Types of batteries: Most types of lead acid batteries including Calcium, Gel , AGM, Wet , Lead Acid, etc..5. Switchmode technology: Yes6. It has polarity protection, output short protection, non battery link protection, over voltage protection, over temperature protection.7. Input voltage: 100-240V AC, 50-60Hz8. Rated output: 12V 7A9. Minimum start voltage: 8.0V10. Battery range: 6-120Ah11. Efficiency: 85%Specification: General Certificate ROHS, FCC, UL, EMC, LVD Package Weight One Package Weight 0.51kgs / 1.12lb One Package Size 22cm * 12cm * 4cm / 8.66inch * 4.72inch * 1.57inch Qty per Carton 40 Carton Weight 21.70kgs / 47.84lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 40 pcs = 20880 pcs40HQ: 1212 cartons * 40 pcs = 48480 pcs

Read more less