Search results for "modem"

1. Interface type: CAT6mb network interface parent 2. Transmission bandwidth: 250Mhz 3. Transmission speed: 1000Mbps 4. Product color: silver 5. Product material: zinc alloy, phosphor copper contact point, gold plating treatment, gold plating thickness of 50U 6. Zinc alloy shell, good shielding effect, phosphor copper contact sheet, good contact performance, contact sheet gold treatment, effective oxidation resistance, improve the transmission stability. 7. Product USES: family decoration, computer room, company, monitoring, Internet bar and other network wiring, standard clasp, can be assembled on the wiring panel 8. Applicable network equipment: desktop, laptop, router, smart TV, TV boxSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 8cm * 5cm * 2cm / 3.15inch * 1.97inch * 0.79inch Qty per Carton 600 Carton Weight 25.50kgs / 56.22lb Carton Size 44cm * 42cm * 20cm / 17.32inch * 16.54inch * 7.87inch Loading Container 20GP: 721 cartons * 600 pcs = 432600 pcs40HQ: 1674 cartons * 600 pcs = 1004400 pcs

Read more less

Overview1. This is a small 1D/2D codes reader, by using the intelligent image recognition algorithm, it will decode the barcode or 2D code on paper or screen, fast and accurately.2. Through the onboard USB and UART interface, it can be directly plugged into a computer, or be easily integrated to kinds of devices due to its small form factor.Features1. Easy to use, requires no knowledges of image recognition2. Decodes various common 1D/2D codes such as Barcode, QR code etc.3. Onboard micro USB and UART serial port, allows to connect with computers or embedded devices4. Configurable via scanning configuration code5. Onboard light source, works in the darkSpecifications1. Operating voltage: 5V2. Operating current: 135mA (scanning), 58mA (standby), 2mA (sleep)3. Operating temperature: 0°C~60°C4. Operating humidity: 5%~95% (Non-condensing)5. Communication interface: UART, USB6. Decodes 1D codes: Codebar, Code 11, Code 39/Code 93, UPC/EAN, Code 128/EAN128, Interleaved 2 of 5, Matrix 2 of 5, MSI Code, Industrial 2 of 5, GS1 Databar(RSS)7. Decodes 2D codes: QR code, Data Matrix, PDF4178. Light source: white9. Scan angels: roll 360°, skew ±65°, pitch ±60°10. Field of view: 28° (horizontal), 21.5° (vertical)11. Dimension: 53.3mm x 21.4mm12. Package contents:- Barcode Scanner Module x1- USB type A plug to micro B plug cable x1- PH2.0 4Pin x1Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 8cm * 4cm * 2cm / 3.15inch * 1.57inch * 0.79inch Qty per Carton 1400 Carton Weight 134.40kgs / 296.30lb Carton Size 56cm * 40cm * 40cm / 22.05inch * 15.75inch * 15.75inch Loading Container 20GP: 297 cartons * 1400 pcs = 415800 pcs40HQ: 690 cartons * 1400 pcs = 966000 pcs

Read more less

1. Hardware Specifications: Intel WiFi 6E AX210 2. Wireless standard: support IEEE802.11a/b/g/n/ac/ax 3. Bluetooth version: Bluetooth 5.2 4. Scope of application: Laptops 5. Interface support: M.2 6. Wireless speed: 2.4GHz: 574Mbps; 5.8GHz: 2400Mbps; 6GHz: 2400Mbps 7. System support: Windows10 (64-bit) 8. Encryption method: WPA2/WPA3 9. Product size: 3 x 2.2cmSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 17cm * 11cm * 2.5cm / 6.69inch * 4.33inch * 0.98inch Qty per Carton 200 Carton Weight 11.00kgs / 24.25lb Carton Size 57cm * 52cm * 36cm / 22.44inch * 20.47inch * 14.17inch Loading Container 20GP: 249 cartons * 200 pcs = 49800 pcs40HQ: 580 cartons * 200 pcs = 116000 pcs

Read more less

1. It supports all car systems diagnostic function. It makes yoursmart device become a professional vehicle diagnostic tool.2. It is compatible with android and ios system.3. It is a professional diagnostic tool for DIYers and mechanics.4. Supported protocols: ISO 9141, KWP2000, SAE J1850, CAN, J1850 VPW, J1850 PWM5. Supported languages: English, French, German, Italian, Spanish, Russian, Polish, Chinese6. Bluetooth version: 5.2Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 12cm * 8cm * 4cm / 4.72inch * 3.15inch * 1.57inch Qty per Carton 100 Carton Weight 8.00kgs / 17.64lb Carton Size 43cm * 25cm * 37cm / 16.93inch * 9.84inch * 14.57inch Loading Container 20GP: 670 cartons * 100 pcs = 67000 pcs40HQ: 1556 cartons * 100 pcs = 155600 pcs

Read more less

1. Dynamic LED Button Labels: The button labels change based on the selected operating mode, making it easy for players to quickly memorize the button layout.2. Multiple Connection Methods: Supports Bluetooth, 2.4GHz wireless, and USB wired connections.3. Retro-Chic Minimalist Design: Features significant hardware upgrades, including customizable P1 and P2 buttons and a more intuitive mode-switching dial. It retains the classic NES color scheme and blends retro elements into its design, evoking nostalgic memories.4. Play Anywhere: Compatible with a wide range of platforms and devices. In addition to Bluetooth and 2.4GHz wireless, it supports USB wired connections. Firmware updates allow for new operating modes or support for additional devices.Specifications:1. Connection Methods: Bluetooth, 2.4GHz wireless, USB wired2. Power Source: 1000mAh lithium-polymer battery3. Charging Time: Approx. 4 hours4. Battery Life: Approx. 40 hours via 2.4GHz connection; approx. 30 hours via Bluetooth connection5. Dimensions: 303 x 203 x 111.5 mm6. Weight: 2.1 kgSpecification: Package Weight One Package Weight 2.58kgs / 5.68lb One Package Size 36cm * 25cm * 15cm / 14.17inch * 9.84inch * 5.91inch Qty per Carton 4 Carton Weight 11.29kgs / 24.89lb Carton Size 38cm * 52cm * 32cm / 14.96inch * 20.47inch * 12.6inch Loading Container 20GP: 421 cartons * 4 pcs = 1684 pcs40HQ: 979 cartons * 4 pcs = 3916 pcs

Read more less

1. Bluetooth version: 5.32. Transmission distance: about 10-20m3. Use time: about 30-40h (support super fast charging)4. Interface: Type-C 5. Packing list: headphones x 1, charging cable x 1, ear caps x 6 pairs6. Charging compartment size: about 6.46 x 6.17 x 2.96cm 7. Weight: single earphone about 5.5gFeatures:1. 6 sound sensors to cover multi-band noise, 1 barometric pressure sensor to adapt to the air pressure environment of high altitude flight, providing stable noise reduction effect2. Adjustable ambient transparency mode or noise reduction mode through APP or Touch Bar3. ACAA 4.0 coaxial dual-unit acoustic architecture, equipped with digital crossover technology, high, medium and low frequency smooth articulation, the whole link to perceive the real good sound4. Bluetooth transmission technology, can transmit 3 times (or more) than the AAC or SBC encoding data volume, bring high-resolution music enjoyment5. Fixed sound field or head tracking mode can be selected, the sound changes with your movement, bringing a more realistic sense of immersion6. 6Mic + AI call noise reduction system, intelligent recognition and separation of human voice and environmental noise, clear voice calls anytime, anywhere7. APP open intelligent dialog mode, the headset can detect the human voice dialog, no need to take off the headset, you can also easily talk to each other8. Bluetooth 5.3 connects two devices at the same time, switching freely without disconnecting9. Finding anti-lost, with the help of APP to let the device beep to determine the location of the headset or charging bay10. Ergonomic streamline design, solid fit to the ear, highly flexible silicone ear caps, automatic adjustment of the shape, 30-degree inclined into the ear design, natural fit to the ear canal11. 6 pairs of silicone ear caps, fit various ear shapes, more comfortable and stable to wear12. Sliding lid charging case, one hand can be pushed open smoothly, more convenient to pick up and put down the headphones13. The charging compartment is designed with digital display and Touch Bar, you can adjust the level of noise cancellation/transparency by sliding left and right14. IPX5 waterproof, not afraid of rain and sweatSpecification: Package Weight One Package Weight 0.35kgs / 0.78lb One Package Size 12cm * 12cm * 5cm / 4.72inch * 4.72inch * 1.97inch Qty per Carton 70 Carton Weight 25.50kgs / 56.22lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 70 pcs = 30660 pcs40HQ: 1018 cartons * 70 pcs = 71260 pcs

Read more less

Function1. Remove the headphones and the power button/microphone jack to the front panel, convenient to connect the headset and the power button 2. Move the keys to the bottom of the LCD screen for a larger touch area and a more comfortable keystroke experience 3. Upgrade the built-in speakers to double the sound 4. PCB to reserve a variety of upgrades required pad, out of the box, can be used as a DIY upgrade learning template 5. Change the QRP CW frequency quickly 6. Support CW side volume adjustment 7. Support CW side tones 8. This is a shortwave QRP SSB/CW transceiver. Ultra-small size for portable outdoor use, (no battery) 1602n LCD screen, built-in speakers, support to connect computers using FT8, JS8, FT4 and other mode software control digital, support CW automatic decoding Features: 1. 8 tracks covering 80M/60m/40m/30M/20m/17M/15m/10m 2. PCB layout design in line with high frequency circuit design principles to ensure excellent performance 3. Both built-in Battery and external 13.8v power supply, can achieve 8-stop 3-5w power, and reserve the necessary sot-223 and To-220 pack pad for upgrading 4. High launch efficiency 7. KDS high precision tcxo brand, frequency accuracy above 1ppm, frequency stability above 0.5ppm 8. Ultra-small size: 88x39x124mm (without bulge) 9. Rich interfaces (cat, ptt out, mic/key, k-head mic) 10. All LPF components use 100v c0g/np0 capacitors 11. Using op-amp chips are lower than those of lm4562 noise 12. A built-in speaker with a cavity 13. BNC antenna interfaceExplanation1. Support full mode: usb, lsb, cw, am, fm (ssb mode reception effect is good, but the transfer effect is poor. AM and FM mode is free, the effect is not good) 2. Filter DSP filter: 4000, 2500,1700,500,200,100,50 Hz passband 3. Function DSP function: automatic gain control (AGC), noise reduction (NR) , XMIT Voice Trigger (Vox), RX attenuator (Att), TX Noise Gate, TX unit control, volume control, DBM/S instrument 4. Sidebar/carrier suppression SSSSB emission: superior to -45dbc, IMD3(dual tone) -33dbc, receiver: superior to -50dbc 5. Support for multi-band support, in the 80m frequency range of continuous adjustable 10m (from 20khz. 99mhz, loss performance) 6. Open source firmware, built using Arduino IDE; allows experimentation, new features can be added, contributions can be shared via github, software complexity: 2000 lines based on 7. The software vovovox code can be used for fast complete control (qsk and semi-qsk operations) or RX/auxiliary switch TX to be used in digital mode (no cat or PTT interface is required) 8. The PTT/PA output is externally controlled by the all-digital tx-delay stage and the software-based SSB stage transmitter: the phase of sill SI5351 is controlled (by a small frequency change i2c at 800 kbits/s) and the PA amplitude is controlled (by a pwm pa key shaping circuit) 9. Software-based all-digital SDR receiver level (optional): sampling of I/Q (complex) signals from a digital mixer with an orthogonal sampling detector, and mathematically perform a 90-degree phase shift (David Hilbert transform) in the software by adding an Atten sideband 10. Three independent switchable analog pushers (0db, -13 db, -20 db, -33 db, -53 db, -60 db, -73 db) from the front receiver 11. Receiver background noise mds: -135 DBM at 28 mhz (200 hz bw) 12. Receiver receiver front-end selectivity: +/-2 khz scrolling at steep 45 db/decade tuning frequency 13. Blocking dynamic range: 20khz offset 123db, 2khz offset 78db 14. CW decoder, direct/iambic-a/B keying 15. VVFO A/B + RIT and split, and the corresponding relays pass through i2c 16. The CAT supports cat with a filter switch (using the kenwood TS-480 protocol) Package includes: 1. 1 x transceiver 2. 1 x the microphone 3. 1 x charger 4. 4 x machine floor MatsSpecification: Package Weight One Package Weight 0.53kgs / 1.16lb One Package Size 17cm * 12cm * 8cm / 6.69inch * 4.72inch * 3.15inch Qty per Carton 56 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 56 pcs = 9912 pcs40HQ: 412 cartons * 56 pcs = 23072 pcs

Read more less

1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. Integrated ESP32-C6 chip supporting 2.4GHz Wi-Fi and 802.11 b/g/n/ax3. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, and 8KB TCM4. Robust image and voice processing capabilities, with interfaces including JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder5. On-chip stacked 32MB PSRAM, with optional 16MB/32MB Nor Flash integrated off-chip6. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection for Access Permission Management (APM) and privilege separation7. Suitable for image recognition, smartwatches, smart industry, Human-Machine Interfaces (HMI), voice recognition, and IoT applicationsParameters1. Main controller chip: ESP32-P4NRW322. RF chip: ESP32-C6H83. PSRAM size: 32MB4. Flash size: 16MB / 32MB (Optional)5. RF bands: 802.11 b/g/n/ax; 2.4GHz Wi-Fi; Bluetooth 5.36. Operating voltage: 3.3V7. Interface type: Pin header, 1mm pitch8. Size: about 2.5 x 2.5cmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 4cm * 4cm * 2cm / 1.57inch * 1.57inch * 0.79inch Qty per Carton 1728 Carton Weight 36.00kgs / 79.37lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 1728 pcs = 711936 pcs40HQ: 958 cartons * 1728 pcs = 1655424 pcs

Read more less

1. Espressif official ESP32-WROVER module 2. New ESP32 version: REV1 3. Wireless Internet 4. Bluetooth 5. 4MB flash memory 6. 8MB PSRAM 7. Lithium battery interface, 500mA maximum charging current 8. Support TF memory card 9. With 3D wiresSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 10cm * 6cm * 1cm / 3.94inch * 2.36inch * 0.39inch Qty per Carton 400 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 400 pcs = 375600 pcs40HQ: 2180 cartons * 400 pcs = 872000 pcs

Read more less

1. Based on the ESP32-S3 microcontroller, featuring an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz2. Integrates 2.4GHz Wi-Fi and Bluetooth 5 (LE) dual-mode wireless communication with excellent RF performance3. Uses a high-quality relay supporting loads up to 10A at 250V AC or 10A at 30V DC4. Features an onboard isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors5. Includes an onboard RTC chip to support scheduled tasks6. Equipped with an onboard USB Type-C port for power supply, firmware downloading, and debugging7. Includes an onboard terminal block for power input (supports 5V power supply only)8. Features onboard optocoupler isolation to prevent external high-voltage relay circuits from interfering with the control chip9. Includes onboard digital isolation to prevent external signals from interfering with the control chip10. Features onboard integrated power isolation to provide stable isolated voltage; no additional power supply is required for the isolated side11. Includes onboard RS485 transceiver indicators for easy monitoring of device operating status12. Comes with a DIN-rail mountable protective enclosure for convenient installation and enhanced safetySpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 32cm * 30cm / 19.69inch * 12.6inch * 11.81inch Loading Container 20GP: 555 cartons * 100 pcs = 55500 pcs40HQ: 1289 cartons * 100 pcs = 128900 pcs

Read more less

1. Main controller chip: ESP32-P4NRW32 2. RF chip: ESP32-C6H8 3. PSRAM size: 32MB 4. Flash size: 16MB / 32MB5. RF band: 802.11 b/g/n/ax; 2.4GHz Wi-Fi; Bluetooth 5.3 6. Operating voltage: 3.3V 7. Connector type: Pin header, 1mm pitch8. Size: Approx. 25 x 25 x 3.3mmFeatures:1. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors2. Integrated ESP32-C6 chip, supporting 2.4GHz Wi-Fi and 802.11 b/g/n/ax3. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, and 8KB TCM4. Powerful image and audio processing capabilities; image and audio processing interfaces include a JPEG codec, pixel processing accelerator (PPA), image signal processor (ISP), and H.264 video encoder5. 32MB PSRAM stacked within the chip package, with 16MB / 32MB NOR Flash integrated outside the package (optional)6. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. Also supports hardware access protection, enabling access permission management (APM) and privilege separationSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 6cm * 6cm * 2cm / 2.36inch * 2.36inch * 0.79inch Qty per Carton 760 Carton Weight 16.20kgs / 35.71lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 760 pcs = 313120 pcs40HQ: 958 cartons * 760 pcs = 728080 pcs

Read more less

1. The frequency, power indicator, and signal strength bar are clearly and intuitively displayed on the LED screen.2. Built-in dual antennas, resistant to WiFi, electromagnetic and other interference, with the characteristics of anti-interference and longer transmission distance (30m).3. 24-bit/48kpbs high resolution, Mic/Line modes available for switching.4. The received signal is strong, stable and fast.5. Small wireless system with built-in lithium battery, plug and play, easy to operate.6. Supports dynamic microphones and condenser microphones with built-in power supply.7. Equipped with XLR female to 6.35mm male microphone adapter, compatible with mixers, recorders, speakers, PA systems, amplifiers, etc. Provide stable and reliable wireless transmission.Specification:1. Material: ABS2. Number of channels: 63. Transmission distance: about 30 meters4. Duration: stable for 5 hours5. Power supply: built-in rechargeable lithium battery6. Delay: about 5ms7. Sound dynamics: 110dB8. Sampling rate: 24bit / 48 kpbs audio9. Frequency response: 20Hz-20kHz10. Antenna impedance: 50Ω11. Signal-to-noise ratio: 110dB12. Battery: 3.7V 400mAh lithium-ion battery13. Supported microphone types: dynamic microphone and built-in power condenser microphone14. Product dimensions: 70 x 30 x 30 mm15. Weight: 200 gSpecification: Package Weight One Package Weight 0.40kgs / 0.87lb One Package Size 17cm * 14cm * 6cm / 6.69inch * 5.51inch * 2.36inch Qty per Carton 20 Carton Weight 8.00kgs / 17.64lb Carton Size 35cm * 29cm * 30cm / 13.78inch * 11.42inch * 11.81inch Loading Container 20GP: 875 cartons * 20 pcs = 17500 pcs40HQ: 2032 cartons * 20 pcs = 40640 pcs

Read more less