Search results for "Temperature Sensor"

1. Operating voltage range: DC voltage 5-20V2. Static current: <65uA3. Level output: 3.3 V high / low 0V4. Trigger mode: L non-repeatable trigger / H repeat trigger (default repeat trigger)5. Delay time: 0.5-200S (adjustable) can be made in the range of a few seconds - tens of minutes6. Blocking time: 0.2S can be made in the range of a few seconds - tens of seconds7. Circuit board dimensions: 32mm*24mm8. Sensing range: <120 degree cone angle, in 7m9. Working temperature: -15-+70 degrees10. Induction lens size: diameter: 23mmSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 8cm * 5cm * 3cm / 3.15inch * 1.97inch * 1.18inch Qty per Carton 510 Carton Weight 14.00kgs / 30.86lb Carton Size 30cm * 50cm * 46.7cm / 11.81inch * 19.69inch * 18.39inch Loading Container 20GP: 380 cartons * 510 pcs = 193800 pcs40HQ: 883 cartons * 510 pcs = 450330 pcs

Read more less

1. Material: PC+ABS2. Power supply: OBD interface3. S100: vehicle speed, speed, water temperature, voltage, fuel consumption, turbo pressure, oil temperature, gearbox oil temperature, oil pressure4. S101: vehicle speed, speed, water temperature, voltage, fuel consumption, turbo pressure, engine load, vehicle external temperature exhaust temperature5. Large font high-definition display uses LED high-brightness lamp beads, which are still clearly visible under strong light6. Ambient light linkage alarm, gradually flashing from the middle to both sides and making a beeping sound7. Dual unit switching, strong compatibility, support most OBD II models after 2008, compatible with K-line vehicles8. Ignition start, flameout shutdown, built-in light sensor, can sense the brightness of the external environment and automatically adjust9. High temperature resistant and non-deformed, multiple installation methods, free placement10. Size: length 131mm, width 62.6mm, height 26.5mm11. Note: Different versions of S100 and S101 correspond to different functions, and some functions require vehicle sensor support!Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 19cm * 15cm * 5cm / 7.48inch * 5.91inch * 1.97inch Qty per Carton 52 Carton Weight 15.50kgs / 34.17lb Carton Size 55cm * 32cm * 42cm / 21.65inch * 12.6inch * 16.54inch Loading Container 20GP: 360 cartons * 52 pcs = 18720 pcs40HQ: 837 cartons * 52 pcs = 43524 pcs

Read more less

1. VOX function: Press VOX key will turn on VOX mode, the VOX mode automatically puts the display in sleep mode to save battery. It reactivates automatically, when it detects noise in the baby room. 2. Two way (talk back): Parent can talk back to the camera, when baby cry or upset, comfort baby with parent voice. 3. Temperature monitoring: Measure air temperature around baby at any time. 4. Built-in 8 lullabies in the camera: May help the parent comfort the baby to fall into a sleep. 5. Automatic night vision: Night vision lamps help parents to see baby clearly in the night. 6. Secure, interference free, long range. 7. High contrast 2.4 inch color LCD monitor. 8. Long battery life (Up to 24 hours in vox mode). 9. Multiple languages support (English/French/Spanish/Portuguese/Italian/German/Turkish/Russian).Specification: General Model VB605 Material ABS Capacity 750mAh (monitor) Frequency 2.4GHz Transmission Distance 260m open field Modulation GFSK Language English, German, Russian, Portuguese, Spanish, Italian, French, Turkish Temperature - 10 ~ +45 degree C Size 59*112*17mm(monitor), 67*105*67mm(camera) Weight 178g (monitor+camera) Monitor Screen Size 2.4 inch LCD RX Sensitivity -90dBm Screen Material TFT Resolution 320*240 Camera Sensor 1/3 inch CMOS Minimum Illumination 0 Lux (IR on) Night Vision Distance 5m Package Include Package Contents 1 x baby monitor 1 x Camera 1 x User Manual 2 x Power Charger (US, EU, UK, AU optional) Package Weight One Package Weight 0.44kgs / 0.96lb One Package Size 19cm * 16cm * 8cm / 7.48inch * 6.3inch * 3.15inch Qty per Carton 20 Carton Weight 9.60kgs / 21.16lb Carton Size 41cm * 38cm * 33cm / 16.14inch * 14.96inch * 12.99inch Loading Container 20GP: 518 cartons * 20 pcs = 10360 pcs40HQ: 1204 cartons * 20 pcs = 24080 pcs

Read more less

1. Equipped with a human body sensor, the screen will automatically turn on when people come, and the bubble will be induced by reaching out2. 35 seconds of strong water flow to dredge the pipes, upgrade the self-cleaning function, and keep the machine away from blockages3. The horizontal water tank is designed to be drip-proof and leak-proof, so that the washbasin can be kept clean and tidy4. High-definition large screen, time and temperature are displayed at the same time5. Three levels of foam volume, which can be adjusted at will to meet the different dosage needs of adults and children6. 450ml large-capacity water tank, automatic reminder when the liquid volume is less than 10%7. Built-in 2000mAh lithium battery, can last for 60 days8. IPX5 waterproof, do not wash the body with water9. Multi-liquid application, hand sanitizer, detergent, shower gel, shampoo, etc. add 3-8 times of water to dilute and pour into normal foam.10. 0.25 seconds extremely fast bubble, 3-5 cm infrared sensing area11. Upgrade 2.0 motor, energy saving and noise reduction12. Strong non-marking adhesive, easy and stable installation without punching13. Dimensions: 18.5 x 6.5 x 10.8 cmSpecification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 20cm * 10cm * 12cm / 7.87inch * 3.94inch * 4.72inch Qty per Carton 36 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 36 pcs = 6372 pcs40HQ: 412 cartons * 36 pcs = 14832 pcs

Read more less

1. Material: ABS2. Power supply: rechargeable lithium battery 2000mAh3. Display mode: LED screen4. Atmospheric pressure: 86Kpa - 106Kpa5. Sampling time: 1.5 seconds6. Detection temperature: -10 to 50 degrees celsius7. Relative humidity: 20 percent to 85 percent8. Storage temperature: -10 degrees celsius to 60 degrees celsius9. 5V DC power supply for charging10. Product size: 270x90x35mm11. Weight: 268 gramsPacking list:- Host x 1- Manual x 1- Charging cable x 1Specification: Package Weight One Package Weight 0.60kgs / 1.32lb One Package Size 33cm * 10cm * 4.5cm / 12.99inch * 3.94inch * 1.77inch Qty per Carton 54 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 54 pcs = 9558 pcs40HQ: 412 cartons * 54 pcs = 22248 pcs

Read more less

Type:Carbon Monoxide DetectorsSensor Type:Electrochemical CO sensorSensitive Level:5 PPMOverview:The product is carbon monoxide gas detector with human voice prompt and microprocessor control, supporting display of the gas concentration.This detector adopt electrochemical sensor which is stable and reliable. It keeps the place safe from the threats of carbon monoxide gas.This product can be well used in kitchen,bathroom, ect.Features:LCD display the carbon monoxide gas concentration from 000-999PPM.Human voice prompt, when reach the given alarm level, the detector will alarm and voice prompt.Adopting high reliable and stable electrochemical sensor,effectively detect the real-time CO gas and remind people.Low current consumption, ultra-long standby time.Silence your gas detector by immediately pressing the test button when non-emergency gas.Low battery warning. The LCD screen show “LB” and voice prompt “attention please,low battery warning”.Press the TEST/RESET button, can view the alarm levels.When the detector is in fault,it will displaying “ERR”.Specifications:Power Supply: 3 x 1.5V AAA batteries(not included)Sensor Type: Electrochemical CO sensorSensitivity/Alarm Time:50 ppm,within 60~90 minutes;100 ppm,within 10~40 minutes;300 ppm,within 3 minutes;400ppm,immediatelyTemperature: 0-50 Celsius DegreesRelative Humidity:10%~95%Detecting Level Range:000~999PPMError:+/-10%Normal Working Status:000PPMAlarm Concentration:030~999PPMBattery Status:Low battery warningColor: Black, WhiteItem Size: Approx. 9.9 x 9.9 x 3.5cm(L*W*H)Item Weight: Approx.120g/4.21ozSpecification: Package Weight One Package Weight 0.18kgs / 0.40lb One Package Size 12cm * 12cm * 6cm / 4.72inch * 4.72inch * 2.36inch Qty per Carton 110 Carton Weight 19.25kgs / 42.44lb Carton Size 56cm * 56cm * 28cm / 22.05inch * 22.05inch * 11.02inch Loading Container 20GP: 303 cartons * 110 pcs = 33330 pcs40HQ: 705 cartons * 110 pcs = 77550 pcs

Read more less

Specifications1. Alarm: 108 decibels 2. Delay time upgraded to: 3/15/30/60 seconds, default delay 15 seconds 3. Prompt sound upgraded: drip-drop prompt is slower, not noisy and harsh 4. After canceling the trigger, there will be a beep prompt, silent protection, and prompt after delay 5. The host has two No. 7 batteries, and the battery is not delivered 6. General alarm: When the door or window is opened, the alarm sound will be issued immediately 7. Door closing alarm: If the door has been opened for 15 seconds (15 seconds is the factory default value, 3 seconds/15 seconds/30 seconds/60 seconds according to your choice), the alarm will continue to sound until the door is closed 8. Doorbell mode: a "ding-dong" sound is emitted when the door is opened 9. When the battery is low, the LED flashes once per second and a "BiBi" sound is emitted twice every 30 minutes to remind you to replace the battery 10. Easy to install and easy to set up, fix the magnetic bar within 1cm next to the magnetic sensor, use double-sided tape to keep the two alignment arrows opposite 11. Size: 85x43mm, magnetic bar 45x10mmInstallationBattery Installation: 1. Open the battery door, and loaded two AAA alkaline batteries. 2. When the battery after you install the unit will sound one long, one short a??Bea?|Bea?? Prompt the battery to a successful installation: 1. Please use alkaline batteries in order to get good use of effects, such as the use of other batteries can cause the battery use shorter or alarm sound. Installation: 1. Select windows and doors installation location, with water and a rag clear clean the mounting surface, the double-sided adhesive tape on the bottom and then the unit attached to the clean position. 2. Installed host, and then double-sided paste the magnet solid set in the host next to the door or door frame, pay attention please the magnets arrow at the arrow to the right host.Notes1. The machine is for indoor use, do not install in direct sunlight or rain, do not install in the region of high pollution or high humidity. 2. The magnetic sensor of the machine on the right side of the bodya??s mount the magnet in the right side of the machine and align the two arrows. 3. If the host is installed on the door, install the magnet on the door frame, turn, if the host is installed on the door frame should be a magnet mounted on the door, to ensure that the door is open magnet to leave the host to detect. 4. Ensure close the door the host and the magnet installation distance should not exceed 10mm.UseChange your password (first time or replace the battery, do the following to change the password) 1. Make sure the unit is not alert (flashing LED every three seconds in the garrison state once). 2. Press "1" key more than 2 seconds, the machine will beep 1 short "Be", and the LED flashes prompted to enter the password to change the status. 3. Enter the old four-digit PIN (for the first time, to change the password please enter the factory default password "1234"), the machine prompts two short sound of "Be...Be", then enter the new four-digit PIN , the machine will ring three times "the Be...Be...Be" mention show the password change, please remember the new password. 4. Error in the process of enter a password, the machine will ring long and Du...", please repeat "5.3.1.2~5.3.1.3." 5. Keep the battery when you forget your password split out two minutes after installing the battery the unit will restore the factory default password "1234". 6. After replacing the battery password will be restored to factory settings, change your password, please click on the above-mention operation.SettingEnter the delay time setting: 1. Native in the police state, the door was opened to the alarm there is some delay, this delay is used to input to the user to lift the machine into the password, factory setting is 3 seconds, when you first use based on your actual use of the situation set up this time, 2. Make sure the unit is not alert (security status LED flashes every three seconds). 3. More than two seconds. "2"key, the machine will beep 1 short "Be", and the LED flashes, suggesting that the delay to change the satus. 4. Then "1" key once, the machine will ring three times"Be...Be..。Be" prompt delay is changed to 0 seconds, the doors open alarm immediately, if you press the "2" key to change the delay for 3 seconds, "3" key to change the delay for five seconds, "4" key the delay is changed to 10 seconds. 5. Based on your intended use and operation of proficiency set this delay time. 6. When replacing the battery, please re-set the delay time, Arming and disarming: 1. In standby mode, press ON/OFF button once, the machine will ring three times "of Bi of Bi of Bi" prompts the machine to enter the armed mode 15 seconds after the alert status and the LED will flash once every three seconds. 2. In the deployed state, enter the four personal password and then press the ON/OFF key, the unit will beep "of Bi..." sound prompts the machine had to withdraw from the deployment mode in this mode, the machine does not prompt outside of any function in addition to low power. 3. Alarm is triggered 4. Detected in the deployed status, such as the door changed to open the actionSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 10cm * 6cm * 5cm / 3.94inch * 2.36inch * 1.97inch Qty per Carton 150 Carton Weight 7.80kgs / 17.20lb Carton Size 41cm * 28cm * 31cm / 16.14inch * 11.02inch * 12.2inch Loading Container 20GP: 749 cartons * 150 pcs = 112350 pcs40HQ: 1739 cartons * 150 pcs = 260850 pcs

Read more less

1. Portable mini monitoring. 2. Two way (talk back): Parent can talk back to the camera, when baby cry or upset, comfort baby with parent voice. 3. Temperature monitoring: Measure air temperature around baby at any time. 4. Built-in 8 lullabies in the camera: May help the parent comfort the baby to fall into a sleep. 5. Automatic night vision: Night vision lamps help parents to see baby clearly in the night. 6. Secure, interference free, long range. 7. High contrast 2.4 inch color LCD monitor. 8. Long battery life (Up to 20 hours in vox mode). 9. Battery capacity: 800mAh 10. Multiple languages support (English/French/Spanish/Italian/German/Turkish/Portuguese).Specification: General Certificate MSDS Model VB602 Material ABS Power Supply 5V 1A Power 17dBm Max (Transmitting Power) Capacity 540mAh (monitor) Frequency 2400~2483.5MHz Transmission Distance 50m indoor, 260m outdoor Modulation GFSK Language English, German, Portuguese, Spanish, Italian, French Temperature - 10 ~ +50 degree C Size 60*120*18mm(monitor), 67*106*67mm(camera) Weight 85g (monitor), 75g(camera) Monitor Screen Size 2.4 inch LCD RX Sensitivity -90dBm Screen Material TFT Resolution 220X176 Camera Sensor 1/3 inch CMOS View Angle Diagonal 31 degree Pixel 640X480 Minimum Illumination 0 Lux (IR on) Night Vision Distance 5m Package Include Package Contents 1 x baby monitor 1 x Camera 1 x User Manual 2 x Power Charger (US, EU, UK, AU optional) Package Weight One Package Weight 0.48kgs / 1.06lb One Package Size 19cm * 16cm * 8cm / 7.48inch * 6.3inch * 3.15inch Qty per Carton 20 Carton Weight 9.50kgs / 20.94lb Carton Size 41cm * 38cm * 33cm / 16.14inch * 14.96inch * 12.99inch Loading Container 20GP: 518 cartons * 20 pcs = 10360 pcs40HQ: 1204 cartons * 20 pcs = 24080 pcs

Read more less

1. Material: ABS + TPU2. Main Controller: AX32923. Main Frequency: 144M + 8M4. Image Sensor: VGA GC03085. Speaker Power: 1W6. Transmission Mode: 2.4G7. Video Compression: H.2658. Power Supply: Type-C, DC5V/1A9. Main Unit Battery: 2000mAh (Lithium Battery)10. LCD Screen: 3.5-inch TFT Screen (320x240)11. Camera: 1MP12. ??2.4G Wireless Connection: Remotely view your babys real-time video. Transmission distance: 300M in open air, less than 50 meters indoors.13. High-definition video monitoring with a 100W HD camera allows for clear observation of your childs every move.14. High-definition infrared night vision with an effective range of 0-5 meters, allowing you to clearly see your babys every move at night.15. The main unit uses DSP video recognition, and activates dark night vision mode when ambient light falls below 0.2 LUX.16. Crying Detection: Actual detection is notified on the LCD.17. Feeding Alarm: You can set the feeding alarm according to your babys habits in the units settings menu.18. Temperature Detection: You can check your babys room temperature on the LCD.19. Lullaby Function: You can select music in the units settings menu and play it using the main units function buttons.20. Features wide dynamic range and low-light capabilities, with automatic color-to-black transitions.21. Utilizes a 32-bit processor and professional video codec chip.22. Night vision range: 0-5 meters, infrared night vision, with IR-CUT anti-magnetic and red-free technology.Specification: Package Weight One Package Weight 0.38kgs / 0.85lb One Package Size 20cm * 16cm * 8cm / 7.87inch * 6.3inch * 3.15inch Qty per Carton 30 Carton Weight 12.40kgs / 27.34lb Carton Size 50cm * 42cm * 42cm / 19.69inch * 16.54inch * 16.54inch Loading Container 20GP: 302 cartons * 30 pcs = 9060 pcs40HQ: 701 cartons * 30 pcs = 21030 pcs

Read more less

1. This ABS brake bleed scan tool will cycle the pump and valves for a tight brake pedal, this is an obd2 scanner with ABS auto bleed function. With step-by-step instructions, even beginners can easily navigate through it. Note: It is not suitable for vehicles that lack auto bleed function.2. NT630 Plus takes OBD-II diagnostics to a new level by customizing the functions of ABS and SRS systems. This SRS and ABS scanner provides in-depth insights into error code diagnostics, wheel speed sensors, airbag circuits, cable connector monitors, and more. Note: This scanner is not suitable for airbag crash data/programming issues.3. This obd2 scanner with ABS and SRS provides in-depth diagnosis of anti-lock brake system and SRS/airbags, and can also perform airbag light reset/SAS (steering angle sensor) adjustment/oil light reset daily reset service. These issues will be restored after the car fault is repaired. Note: Some classic vehicles without electronic control systems do not support reset service.4. The NT630 Plus ABS code reader can be directly connected to the OBD-II port. It will immediately diagnose all OBD-II modules, display real-time data, locate bad sensors and indicate I/M readiness status before the annual inspection. Guide you to perform maintenance work, reduce potential driving risks and maintain optimal driving performance.5. This car diagnostic scanner allows you to test all potential car faults in the ABS/airbag system, and the function will return to normal after exiting the program. Please note that only ABS/SRS modules are supported.6. With an intuitive LCD display and clear instructions, even beginners can use the NT630 Plus to diagnose car faults.7. The ergonomic touch screen has an anti-collision and anti-slip design, which is convenient for users to perform daily car diagnostic work. The unique sound when pressing the button notifies you that the task has been completed or the command has been executed.8. This car code reader comes with a sturdy storage box, which is convenient to carry and avoid damage.9. Graphic real-time data provides an intuitive view of the cars condition. The obd2 scanner with ABS and SRS will also save and support diagnostic data printouts to avoid unnecessary diagnostic fees when you have to find a professional mechanic to fix your cars fault instead of solving it yourself.Warm Tips:1. The coverage and functions will vary for different brands and models, so please check the coverage before purchasing.3. Some vehicles do not support automatic VIN, so please use manual VIN input.4. NT630 Plus is a diagnostic tool, not a repair tool.5. NT630Plus does not support tire pressure/transmission/program/engine electronic control functions.6. Some vehicles only support automatic deflation on one side or single wheel.Product parameters:1. Detection system: engine, ABS, SRS, SAS2. Display: 2.8-inch TFT color screen3. Supported languages: English, Spanish, French, Russian, Portuguese, Dutch, German, Thai, Italian, Swedish, Hungarian, Japanese, Korean4. External power supply: 8-18V, powered by vehicle battery5. Operating temperature: 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)6. Storage temperature: -20 to 70 degrees Celsius (-4 to 158 degrees Fahrenheit)7. Product size: 200 x 100 x 38mm8. Weight: 600 gramsSpecification: Package Weight One Package Weight 0.95kgs / 2.10lb One Package Size 22cm * 17cm * 9cm / 8.66inch * 6.69inch * 3.54inch Qty per Carton 30 Carton Weight 28.50kgs / 62.83lb Carton Size 47cm * 46cm * 53cm / 18.5inch * 18.11inch * 20.87inch Loading Container 20GP: 232 cartons * 30 pcs = 6960 pcs40HQ: 540 cartons * 30 pcs = 16200 pcs

Read more less

1. Material: metal, TPU, electronic components2. Functions: step counting, calories, blood oxygen/heart rate/blood oxygen/sleep monitoring, call reminder, message push, alarm clock reminder, sedentary reminder, remote control selfie, step counting, etc.3. Supported languages: Chinese, English, German, French, Italian, Spanish, Polish, Russian, Portuguese4. Support system: Android6.0 or above, IOS11.4 or above5. Memory: 64MB6. Screen: 1.54TFT color screen7. Resolution: 240 x 240 dpi8. Audio: BOX sound cavity9. Flashlight: LED light10. Bluetooth version: 5.011. Temperature sensor: SC7A2012. Heart rate chip: 360513. Battery capacity: 240mAh lithium battery14. Battery life: 5-7 days15. Charging method: magnetic suction16. Waterproof level: IP6717. Weight: 152 gramsSpecification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 9.5cm * 16.3cm * 2cm / 3.74inch * 6.42inch * 0.79inch Qty per Carton 162 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 162 pcs = 28674 pcs40HQ: 412 cartons * 162 pcs = 66744 pcs

Read more less

Features1. Hassle-free portable monitoring. 2. Two way(talk back). 3. Temperature monitoring. 4. Built-in 8 lullabies in the camera. 5. Automatic night vision. 6. Secure, interference free, long range digital signal. 7. High contrast 2.0 inch 220 x 176 color LCD monitor. 8. Long battery life (8 hours in Vox mode). 9. Transmission Frequency: ISM 2400~2483.5 MHz. 10. Transmission Power: 17dBm. 11. Unobstructed Effective Range: 160ft/50m indoor/850ft/260m outdoor, line of sight. 12. Spread Spectrum: AFH & TDMA. 13. Modulation Mode: GFSK. 14. Monitor receiving sensitivity: -90dBm. 15. Monitor consumption current (Max.): 150mA. 16. Camera consumption current (Max.): 100mA. 17. Camera CMOS image sensor, 320 x 240 picture pixel, 5m night vision distance, 31 degree view angle.Functions1. Remote control: Built-in lullabies, may help the parent comfort the baby fall into a sleep. 2. Temperature monitoring: Know your baby room temperature all the day long without worries. 3. Talk with baby: Two way audio between the camera and monitor, you can talk back to baby. 4. Night vision: Keep an eye on baby all night long with automatic night vision. 5. Up to 8 hours of battery life (in Vox mode): No need to charge the battery for the monitor In the whole night in Vox mode.Specification: General Model VB601 Power Supply DC 5V Performance Night Vision, Two Way Audio Language English, German, Spanish, Italian, French System / Hardware Image Sensor CMOS Media Format Resolution 320*240 Night Vision Infrared Distance 5m Configuration 10 infrared LEDs Physical Environment Environment Indoor Battery Capacity 400mAh Work Time 8 hours Dimensions Size 63*126*27mm(Monitor), 60*102*60mm(Camera) Weight 80g + 60g Package Include Package Contents 1 x Camera 1 x User Manual 1 x baby monitor Package Weight One Package Weight 0.43kgs / 0.95lb One Package Size 19cm * 14cm * 6cm / 7.48inch * 5.51inch * 2.36inch Qty per Carton 20 Carton Weight 9.50kgs / 20.94lb Carton Size 40cm * 30cm * 32cm / 15.75inch * 11.81inch * 12.6inch Loading Container 20GP: 694 cartons * 20 pcs = 13880 pcs40HQ: 1612 cartons * 20 pcs = 32240 pcs

Read more less