Search results for "diy electronics"

9V • 6F22 • 1604D Practical 9V power for compatible electronic devices. A 9V 6F22 / 1604D heavy-duty battery for compatible cameras, toys and other electronic equipment requiring this battery format. 9V formatDesigned for equipment requiring 9V power. 6F22 / 1604DCommon battery identification formats. Versatile useSuitable for compatible cameras, toys and electronics. Before buying Check your device's manual or existing battery and confirm it specifies 9V 6F22 / 1604D before ordering. Do not use a battery simply because the voltage appears similar.

Read more less

AMOLED screen specifications1. Display panel: AMOLED2. Display size: 1.75 inches3. Display resolution: 466 x 466 pixels4. Display colors: 65K5. Display brightness: 700 cd/㎡6. Contrast ratio: 100000:17. Communication interface: QSPI8. Driver IC: CO53009. Touch: supported10. Touch IC: CST9217Product features1. Unique dual-core, dual-architecture design, featuring a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at clock frequencies up to 150MHz, allowing users to flexibly switch between the two architectures.2. Built-in 520KB SRAM and 16MB on-chip Flash, with a reserved PSRAM pad.3. Onboard 1.75-inch capacitive touch HD AMOLED screen. 1. Screen: 466 × 466 resolution, 65K color, capable of clearly displaying color images.2. Built-in CO5300 driver chip and CST9217 capacitive touch chip, using QSPI and I2C interfaces respectively for communication, minimizing interface pin usage.3. Onboard 3.7V MX1.25 lithium battery charging/discharging interface, beneficial for mobile applications.4. USB 1.1 master and slave device support.5. Supports low-power sleep and hibernation modes.6. Can be recognized as a mass storage device via USB for drag-and-drop program download.7. Five multi-functional GPIO pins.8. One SPI, two I2C, two UART, four 12-bit ADCs, and five controllable PWM channels.9. Precise on-chip clock and timers.10. Built-in temperature sensor for real-time chip temperature monitoring.11. Twelve programmable I/O (PIO) ports. 14. State machine for custom peripheral support.15. Employs AXP2101 for efficient power management, supports multiple voltage outputs, integrates charging and battery management functions, and optimizes battery life.16. Uses an AMOLED screen with higher contrast, wider viewing angles, richer colors, and faster response time, resulting in superior visual effects while offering advantages such as slim design, low power consumption, and flexibility.17. Compact panel for more touch possibilities, suitable for various smart device development, enabling human-computer interaction functions, and can operate independently with a battery.18. Onboard audio codec chip supports high-quality audio processing, providing clear and excellent audio input and output.Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 144 Carton Weight 12.70kgs / 28.00lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 144 pcs = 70560 pcs40HQ: 1137 cartons * 144 pcs = 163728 pcs

Read more less

1. This product is a 64 × 32 resolution RGB full-color LED dot matrix module. It integrates 2048 LEDs, features dual HUB75 interfaces, and supports cascading expansion and quick integration. The GOB version utilizes enhanced packaging technology to improve protection performance and usage reliability.2. Utilizes 2048 RGB LEDs for full-color display with adjustable brightness.3. Resolution is 64 × 32 with a pixel pitch of 3mm, capable of displaying text, color images, or animations.4. Dimensions are 192 × 96 (mm), offering a moderate size ideal for DIY desktop or wall-mounted display applications.5. Onboard two HUB75 interfaces: one for input (to connect a controller) and one for output (to cascade multiple screens).6. GOB technology achieves resistance to impact, water, moisture, and dust.7. This is a bare screen requiring a main control board (such as Raspberry Pi Pico, ESP32, or Arduino) for display. Parameters:1. Product Dimensions: 192 × 96 (mm)2. Resolution: 64 × 32 (2048 DOTS)3. Pixel Pitch: 3mm 4. Pixel Composition: 1R1G1B5. Viewing Angle: Greater than or equal to 160 degrees6. Control Method: Synchronous Control7. Drive Method: 1/16 Scan8. Interface Type: HUB759. Supply Voltage: 5V / 2.5A (VH4 socket input)10. Power Consumption: Less than or equal to 12WSpecification: Package Weight One Package Weight 0.48kgs / 1.07lb One Package Size 24cm * 14cm * 6cm / 9.45inch * 5.51inch * 2.36inch Qty per Carton 24 Carton Weight 12.60kgs / 27.78lb Carton Size 50cm * 30cm * 38cm / 19.69inch * 11.81inch * 14.96inch Loading Container 20GP: 467 cartons * 24 pcs = 11208 pcs40HQ: 1086 cartons * 24 pcs = 26064 pcs

Read more less

1. The RP2350B microcontroller chip, designed based on the Raspberry Pi architecture2. A unique dual-core, dual-architecture design featuring a dual-core ARM Cortex-M33 processor and a dual-core Hazard3 RISC-V processor, both operating at up to 150MHz, allowing users to switch flexibly between the two architectures3. Features 520KB of SRAM, 16MB of on-board on-chip Flash, and 2MB of PSRAM4. Features a Type-C interface, eliminating the need to worry about orientation when plugging in5. Features a 4.3-inch on-board capacitive touchscreen LCD with 800 × 480 resolution and 65K colors6. Supports I2C interface control for capacitive touch, 5-point touch, and interrupts7. On-board resources include CAN, RS485, I2C interfaces, and isolated digital I/O8. On-board voltage regulator supports a wide input voltage range of 7V to 36V9. Inputs feature bidirectional optocoupler isolation, supporting both passive and active digital inputs; active inputs support both positive and negative voltages10. Outputs feature optocoupler isolation with enhanced drive capability, providing a sink current of up to 450mA (MAX)11. USB 1.1 host and device support12. Supports low-power sleep and hibernation modes13. Can be recognized as a mass storage device via USB for drag-and-drop program downloading14. Precise on-chip clock and timers15. Built-in temperature sensor for real-time chip temperature monitoring16. 12 programmable I/O (PIO) state machines for custom peripheral support17. Size: without case about 11.24 x 7.51 x 1.74 cm; with case about 11.63 x 7.9 x 1.8 cmSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15cm * 10cm * 4cm / 5.91inch * 3.94inch * 1.57inch Qty per Carton 80 Carton Weight 17.00kgs / 37.48lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 80 pcs = 37280 pcs40HQ: 1083 cartons * 80 pcs = 86640 pcs

Read more less

1. VCC: 3.3V - 5V power input2. GND: ground wire3. SCL: I2C clock pin4. SDA: I2C data pin5. Communication interface: I2C6. LCD controller: AiP310687. Working voltage: 3.3-5V8. Working temperature: minus 20-70 degrees Celsius9. Display panel: Character LCD10. Display size: 64.5 x 16.0mm11. Characters: 16 x 212. Product size: 87.0 x 32.0 x 13.0mm13. Built-in character LCD panel LCD160214. I2C control interface, only need two signal pins, saving IO resources15. Compatible with 3.3V/5V working voltage16. Comes with online development resources and manuals (Raspberry Pi/Jetson Nano/ESP32/Arduino examples)Specification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 10cm * 4cm * 3cm / 3.94inch * 1.57inch * 1.18inch Qty per Carton 500 Carton Weight 17.00kgs / 37.48lb Carton Size 30cm * 50cm * 56.7cm / 11.81inch * 19.69inch * 22.32inch Loading Container 20GP: 313 cartons * 500 pcs = 156500 pcs40HQ: 727 cartons * 500 pcs = 363500 pcs

Read more less

1. Brand new and high quality. 2. Small and lightweight, easy to carry. 3. Display devices use high bright LED digital tube, stunning display effect. 4. With reverse polarity protection, reverse not burned. 5. The voltmeter only two wires, wiring simple and reliable performance. 6. Suitable for measuring DC voltage, measure range: 2.5V ~ 30V. 7. When measuring voltage below 10V, two digits are displayed after the decimal point; when measuring voltage above 10V, one digit is displayed after the decimal point.Specification: General Material Electronic Component Current <30mA Measure Range DC 2.5-30V Input impedance >50Kohm Operating Temperature -10 ~ 65 Degree Celsius Cable Length 15cm Operating Humidity 10 ~ 80% Reading Display 0.28 inch Cutting Size 26mm space, 2.2mm diameter Size 30*11.5*9mm Weight 3g Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 7cm * 4cm / 5.91inch * 2.76inch * 1.57inch Qty per Carton 200 Carton Weight 10.00kgs / 22.05lb Carton Size 48cm * 32cm * 32cm / 18.9inch * 12.6inch * 12.6inch Loading Container 20GP: 542 cartons * 200 pcs = 108400 pcs40HQ: 1259 cartons * 200 pcs = 251800 pcs

Read more less

Description1. The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.2. STM8 applications use the USB full speed interface to communicate with STMicroelectronics ST Visual Develop (STVD) or ST Visual Program (STVP) software.3. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.Key Features1. 5V power supplied by a USB connector2. USB 2.0 full speed compatible interface3. USB standard A to mini B cable4. SWIM specific features5. 1.65 V to 5.5 V application voltage supported on SWIM interface6. SWIM low-speed and high-speed modes supported7. SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed8. SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector9. SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector10. JTAG specific features11. 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs12. JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector13. Direct firmware update feature supported (DFU)14. Status LED which blinks during communication with the PC15. Operating temperature 0 to 50 °CApplication ExampleConnecting the PC and STM8/STM32 application board through ST-LINK/V2 to establish hardware connectionConnection with STM8 applicationsThe ST-LINK/V2 should be connected to the STM8 application via the SWIM cable. Two SWIM cables are delivered with the product:- SWIM flat ribbon with a standard ERNI connector at one end and a 4-pin connector at the other end- SWIM flat ribbon ended with a 4-pin, 2.54 mm, low-cost connector on two sidesConnection with STM32 applicationsFor STM32 developments the ST-LINK/V2 must be connected to the application using the standard 20-pin female-female JTAG flat ribbon provided.ST-LINK/V2 StatusThe LED labeled COM on top of the ST-LINK/V2 shows the ST-LINK/V2 status (whatever the connection type). When the:1. LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.2. LED is RED: communication between ST-LINK/V2 and the PC is established (end of enumeration).3. LED is blinking GREEN/RED: data are being exchanged between the target and the PC.4. LED is GREEN: the last communication has been successful.5. LED is ORANGE: ST-LINK/V2 communication with the target has failed.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 16cm * 9cm * 5cm / 6.3inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 9.60kgs / 21.16lb Carton Size 48cm * 36cm * 40cm / 18.9inch * 14.17inch * 15.75inch Loading Container 20GP: 385 cartons * 96 pcs = 36960 pcs40HQ: 895 cartons * 96 pcs = 85920 pcs

Read more less

1. Suitable voltage DC3.7-13V2. Current adjustment 0.15A-3A, continuously adjustable3. The continuous discharge power is 15W, that is, the discharge current is about 1A at 13V, and the discharge current is 3A at 5V4. The fan starts and stops intelligently to control the temperature around 40 degrees5. USB positive and negative can lead to a wider range of applications separatelySpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 500 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs40HQ: 562 cartons * 500 pcs = 281000 pcs

Read more less

Features1. Dimensions: The size of the cable storage travel case: 20 cm (7.9 in) x 12cm (4.7 in) x 4cm (1.6 in). Compact size and lightweight make it easy to carry and put into your backpack, handbags or laptop bag without taking much space. Suitable for family use and daily organization. 2. Material: This electronic organizer travel case made of high quality durable waterproof nylon fabric and soft sponge inside to secure your gadgets in place and deliver a quick access whenever you want, a perfect case protects your electronics accessories. 3. Double Layers Design: The electronics storage bag has 2 layers interior compartment with enough space to take in your cords, cables, USB drive, cellphone, charger, mouse, flash drive, and other accessories. 4. Practical and Convenient: Comes with a comfortable hand strap for easy carrying; You may carry it in your hand when heading out. Durable and smooth zipper closure keeps your device securely, convenient for you to have quick access to the items inside the case. 5. Portable and Lightweight: The small size and lightweight design durable cable organizer pouch is a ideal choice when going on holiday, business trip, travel, office, school. Great gift for yourself also a nice share with families and friends. (No include cords, electronic accessories)Specifications1. Fabric: Scrub-12 PVC 2. Lining: 210D 3. Ingredients: Nylon Mesh 4. Size: 19.5 x 11.5 x 4cm 5. Weight: 106gSpecification: Package Weight One Package Weight 0.12kgs / 0.26lb One Package Size 22cm * 15cm * 5cm / 8.66inch * 5.91inch * 1.97inch Qty per Carton 30 Carton Weight 3.80kgs / 8.38lb Carton Size 41cm * 31cm * 26cm / 16.14inch * 12.2inch * 10.24inch Loading Container 20GP: 806 cartons * 30 pcs = 24180 pcs40HQ: 1873 cartons * 30 pcs = 56190 pcs

Read more less

1. Suitable for electronics enthusiasts, engineers, creators and people interested in wireless communication technology2. External subGhz module can be widely used in lot devices, smart home, remote control, wireless sensors and other fields3. Suitable for various devices and scenarios4. Increase the transmission and reception range of 433Mhz, allowing high-gain antenna to be replaced by yourself5. Size: 36x67mmSpecification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 240 Carton Weight 9.50kgs / 20.94lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 240 pcs = 117600 pcs40HQ: 1137 cartons * 240 pcs = 272880 pcs

Read more less

OverviewThis AlphaBot2 robot kit is designed to use with Raspberry Pi 3 Model B. It features rich common robot functions including line tracking, obstacle avoiding, Bluetooth/infrared/WiFi remote control, video monitoring, etc.Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, you're almost there, our open source demo codes is ready to help you get started fast.Raspberry Pi 3 Features1. BCM2837, 1.2GHz 64-bit quad-core ARM Cortex-A532. 1GB RAM3. 10/100 Ethernet port4. 802.11n WiFi NIC5. Bluetooth 4.1 & Bluetooth Low Energy (BLE)6. HDMI port7. USB 2.0 interface x 48. Micro SD card slot9. Combined 3.5mm audio jack and composite video10. 40-pin GPIO interface11. Camera interface (CSI)12. Display interface (DSI)13. Upgraded power management, supports more peripherals (requires a 2.5A power supply or above)AlphaBot2 FeaturesAlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.AlphaBot2-Base, the lower base chassis:1. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking2. Onboard modules like line tracking, obstacle avoiding, needs no messy wiring3. TB6612FNG dual H-bridge motor driver, compared with L298P, it's more efficient, more compact, and less heating4. N20 micro gear motor, with metal gears, low noise, high accuracy5. 5Onboard RGB LEDs, true color lighting, pretty coolAlphaBot2-Pi, the upper adapter board for controller:1. LM2596 voltage regulator, provides the Pi with stable 5V power2. TLC1543 AD acquisition chip, allows the Pi to use analog sensors3. PCA9685 servo controller, make it more smoothly to rotate the pan head4. CP2102 UART converter, easy for controlling the Pi via UARTPackage Contents1. AlphaBot2-Pi (adapter board) x12. AlphaBot2-Base (base chassis) x13. RPi Camera (B) x14. Micro SD Card 16GB x15. Power adapter US standard 5V/3A micro x16. SG90 servo x25. 2 DOF pan and tilt kit x17. IR remote controller x18. FC-20P cable 8cm x19. USB type A plug to micro B plug cable x110. 15PIN FFC 25cm x111. AlphaBot2-Pi screws x112. Micro SD Card Reader x1 (Extra Free)13. Screwdriver x1 (Extra Free)Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 15cm * 11cm * 8cm / 5.91inch * 4.33inch * 3.15inch Qty per Carton 60 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 33cm * 40cm / 23.62inch * 12.99inch * 15.75inch Loading Container 20GP: 336 cartons * 60 pcs = 20160 pcs40HQ: 781 cartons * 60 pcs = 46860 pcs

Read more less

1. Video output: FHD1080P 1920x1080 (interpolation) 30FPS; HD720P 1280x720 (interpolation) 30FPS; VGA2. Video format: AVI3. Magnification: built-in 2-inch screen: 50X; 30-inch computer full screen: 300X4. Photo resolution: 40M/20M/18M/16M/12M/8M/5M/3M/2M5. Photo format: JPG6. Focus range: about 0.1cm7. Frame rate: 30FPS8. PC support: support Windows 7/8/10 (amcap software); Windows 10 system can use the system camera to view images9. Power supply: USB 5V DC10. Battery capacity: 900mAh11. Light source: 8 adjustable built-in LED lights12. Display size: 2 inches13. Size: about 6.5 x 14.5 x 5.5cm14. Weight: about 138gPacking list:- Microscope x1- Tweezers x1- Insect observation box x1- Plastic pick x12- USB charging cable x1- Manual x1- Hand rope x1Specification: General Certificate MSDS Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 15.5cm * 20cm * 6.5cm / 6.1inch * 7.87inch * 2.56inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs40HQ: 412 cartons * 74 pcs = 30488 pcs

Read more less